When one input buffer has multiple frames, it should be fed
again to the hardware with the remaining bytes. Removed the
check for P frame in this scenario as this condition can come with
all frame types.
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: ARUN MANKUZHI <arun.m@samsung.com>
Acked-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Modified the function s5p_mfc_get_dec_y_adr_v6 to access the
decode Y address register instead of display Y address.
Signed-off-by: Sunil Mazhavanchery <sunilm@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Acked-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
vfl_dir should be set to VFL_DIR_M2M so valid ioctls for this
mem-to-mem device can be properly determined in the v4l2 core.
Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Macros used to set input and output RGB type aren't correct.
Updating the macros as per register manual.
Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Use uninterruptible mutex_lock in the release() file op to make
sure all resources are properly freed when a process is being
terminated. Returning -ERESTARTSYS has no effect for a terminating
process and this may cause driver resources not to be released.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
change needed for one of the hwmod patches to function.
Basic test logs for this branch on top of Tony's
omap-for-v3.8/clock branch at commit
558a0780b0 are here:
http://www.pwsan.com/omap/testlogs/hwmod_devel_a_3.8/20121121161522/
However, omap-for-v3.8/clock at 558a0780 does not include some fixes
that are needed for a successful test. With several reverts,
fixes, and workarounds applied, the following test logs were
obtained:
http://www.pwsan.com/omap/testlogs/TEST_hwmod_devel_a_3.8/20121121162719/
which indicate that the series tests cleanly.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=S3v1
-----END PGP SIGNATURE-----
Merge tag 'omap-devel-a-for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8/devel-pcrm
Some miscellaneous OMAP hwmod changes for 3.8, along with a PRM
change needed for one of the hwmod patches to function.
Basic test logs for this branch on top of Tony's
omap-for-v3.8/clock branch at commit
558a0780b0 are here:
http://www.pwsan.com/omap/testlogs/hwmod_devel_a_3.8/20121121161522/
However, omap-for-v3.8/clock at 558a0780 does not include some fixes
that are needed for a successful test. With several reverts,
fixes, and workarounds applied, the following test logs were
obtained:
http://www.pwsan.com/omap/testlogs/TEST_hwmod_devel_a_3.8/20121121162719/
which indicate that the series tests cleanly.
Use uninterruptible mutex_lock in the release() file op to make
sure all resources are properly freed when a process is being
terminated. Returning -ERESTARTSYS has no effect for a terminating
process and this may cause driver resources not to be released.
This patch is required for stable kernels v3.5+.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Use uninterruptible mutex_lock in the release() file op to make
sure all resources are properly freed when a process is being
terminated. Returning -ERESTARTSYS has no effect for a terminating
process and this caused driver resources not to be released. Not
releasing the buffer queue also prevented other drivers to free
memory, e.g. in MMAP -> USERPTR scenario.
This patch is required for stable kernels v3.6+.
Reported-by: Kamil Debski <k.debski@samsung.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Make sure when fimc and fimc-lite capture video node is registered
it has valid pipeline_ops assigned to it. Otherwise when a video
node is opened right after is was registered there, might be an
attempt to use ops that are just being assigned, after function
v4l2_device_register_subdev() returns.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
With Xen acpi pad logic added into kernel, we can now revert xen mwait related
patch df88b2d96e ("xen/enlighten: Disable
MWAIT_LEAF so that acpi-pad won't be loaded. "). The reason is, when running under
newer Xen platform, Xen pad driver would be early loaded, so native pad driver
would fail to be loaded, and hence no mwait/monitor #UD risk again.
Another point is, only Xen4.2 or later support Xen acpi pad, so we won't expose
mwait cpuid capability when running under older Xen platform.
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
PAD is acpi Processor Aggregator Device which provides a control point
that enables the platform to perform specific processor configuration
and control that applies to all processors in the platform.
This patch is to implement Xen acpi pad logic. When running under Xen
virt platform, native pad driver would not work. Instead Xen pad driver,
a self-contained and thin logic level, would take over acpi pad logic.
When acpi pad notify OSPM, xen pad logic intercept and parse _PUR object
to get the expected idle cpu number, and then hypercall to hypervisor.
Xen hypervisor would then do the rest work, say, core parking, to idle
specific number of cpus on its own policy.
Signed-off-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Free the page allocated for the persistent grant.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Move the code that frees persistent grants from the red-black tree
to a function. This will make it easier for other consumers to move
this to a common place.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The LMAC API states that the TSF clock value of
every rx'ed frame is a "usec accurate timestamp
of the hardware clock at the end of frame
(before OFDM SIFS EOF padding)".
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The vendor radiotap patch added a few fields to
struct ieee80211_rx_status that need to be zero,
initialize the struct instead of using whatever
was left on the stack.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Kalle Valo <kvalo@adurom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The vendor radiotap patch added a few fields to
struct ieee80211_rx_status that need to be zero,
initialize the struct instead of using whatever
was left on the stack.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Adding __printf helps spot format and argument mismatches.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Liao reported that when an interface is set DOWN
while another interface is executing a ROC, the warning
in ieee80211_start_next_roc() (about the first item on
the list having started already) triggers.
This is because ieee80211_roc_purge() calls it even if
it never actually changed the list of ROC items. To fix
this, simply remove the function call. If it is needed
then it will be done by the ieee80211_sw_roc_work()
function when the ROC item that is being removed while
active is cleaned up.
Cc: stable@vger.kernel.org
Reported-by: Felix Liao <Felix.Liao@watchguard.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Although the DIU driver creates five framebuffer devices, only the first
one controls the physical display. The remaining four are virtual "AOIs".
Therefore, the EDID data should be stored in the global fsl_diu_data
object, instead of the per-framebuffer object.
Signed-off-by: Timur Tabi <timur@freescale.com>
We don't use the writeback buffer, so don't initialize the registers for
that feature.
The default value for SYN_POL is already zero, so don't re-initialize it.
Writing the INT_STATUS register does nothing.
The value that we write to the PLUT register only makes sense on the
MPC8610 and P1022, so don't touch that register on the MPC5121.
Signed-off-by: Timur Tabi <timur@freescale.com>
Commit 4b5006ec ("shared DIU framebuffer support") added the ability to
retain the splash screen until the framebuffer is opened by user space.
Clean up this code to eliminate redundant writes to registers, and eliminate
the use of dummy area descriptor.
Signed-off-by: Timur Tabi <timur@freescale.com>
Remove functions request_irq_local() and free_irq_local(), and merge
their code into the functions that handle opening and closing the
framebuffer. We also improve the way that interrupts are enabled.
Also implement a work-around for broken U-Boots that leave the DIU
interrupts enabled.
Signed-off-by: Timur Tabi <timur@freescale.com>
The MPC5121 BSP comes with a gamma_set utility that initializes the gamma
table via an ioctl. Unfortunately, the ioctl number that utility uses
is defined improperly, but we can still support it.
Signed-off-by: Timur Tabi <timur@freescale.com>
Allow the platform code not to define a value for diu_ops.set_monitor_port.
This would be for platforms that only have one monitor port.
set_monitor_port() will never be called with an unsupported port anyway.
Signed-off-by: Timur Tabi <timur@freescale.com>
This patch adds support for skb mark matching and set action.
Signed-off-by: Ansis Atteka <aatteka@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
When a clock, C is initialised any orphan clocks listing C as
a possible parent are reparented to it regardless of the
parent requested by the orphan's get_parent() operation.
This means that multiplexers registered before their parents
are reparented to the first parent subsequently declared,
regardless of the selection made by the hardware registers.
For example:
static const char *sel[] = { "srcA", "srcB", "dummy", "srcC" };
child = clk_register_mux(NULL, "child", sel, ARRAY_SIZE(sel), ...);
clk_register_fixed(NULL, "dummy", ...);
clk_register_fixed(NULL, "srcA", ...);
clk_register_fixed(NULL, "srcB", ...);
clk_register_fixed(NULL, "srcC", ...);
Causes child's parent to always be "dummy".
To fix this, when an orphanned clock has a get_parent() operation,
only reparent to the clock indicated by get_parent().
Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: improve $SUBJECT]
Use WARN rather than printk followed by WARN_ON(1), for conciseness.
A simplified version of the semantic patch that makes this transformation
is as follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression list es;
@@
-printk(
+WARN(1,
es);
-WARN_ON(1);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Use WARN rather than printk followed by WARN_ON(1), for conciseness.
A simplified version of the semantic patch that makes this transformation
is as follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression list es;
@@
-printk(
+WARN(1,
es);
-WARN_ON(1);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
ConnectX-3 devices can use either 64- or 32-byte completion queue
entries (CQEs) and event queue entries (EQEs). Using 64-byte
EQEs/CQEs performs better because each entry is aligned to a complete
cacheline. This patch queries the HCA's capabilities, and if it
supports 64-byte CQEs and EQES the driver will configure the HW to
work in 64-byte mode.
The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ.
Since this mode is global, userspace (libmlx4) must be updated to work
with the configured CQE size, and guests using SR-IOV virtual
functions need to know both EQE and CQE size.
In case one of the 64-byte CQE/EQE capabilities is activated, the
patch makes sure that older guest drivers that use the QUERY_DEV_FUNC
command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that
they need an update to be able to work with the PPF. This is done by
changing the returned pf_context_behaviour not to be zero any more. In
case none of these capabilities is activated that value remains zero
and older guest drivers can run OK.
The SRIOV related flow is as follows
1. the PPF does the detection of the new capabilities using
QUERY_DEV_CAP command.
2. the PPF activates the new capabilities using INIT_HCA.
3. the VF detects if the PPF activated the capabilities using
QUERY_HCA, and if this is the case activates them for itself too.
Note that the VF detects that it must be aware to the new PF behaviour
using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode.
User space notification is done through a new field introduced in
struct mlx4_ib_ucontext which holds device capabilities for which user
space must take action. This changes the binary interface so the ABI
towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only
when **needed** i.e. only when the driver does use 64-byte CQEs or
future device capabilities which must be in sync by user space. This
practice allows to work with unmodified libmlx4 on older devices (e.g
A0, B0) which don't support 64-byte CQEs.
In order to keep existing systems functional when they update to a
newer kernel that contains these changes in VF and userspace ABI, a
module parameter enable_64b_cqe_eqe must be set to enable 64-byte
mode; the default is currently false.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Patch f055f1f6 [ARM: sunxi: Add sun4i and cubieboard support] missed
this sun4i.dtsi include file. This patch finally brings it upstream
enabling support for sun4i boards.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
The abx500 clock driver is a platform driver which will be initialized
during arch init. The platform device shall be added from the ab-core
driver as a mfd child device to maintain correct boot sequence.
Depending on what ab version we use, different clock definitions will
be added.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Add the support for channel maps of the PCM streams on USB audio
devices. The channel map information is already found in
ChannelConfig descriptor entries, which haven't been referred until
now.
Each chmap entry is added to audioformat list entry and copied to TLV
dynamically instead of creating a whole chmap array.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus has pointed out that indiscriminate use of BUG's can make it
harder to diagnose bugs because they can bring a machine down, often
before we manage to get any useful debugging information to the logs.
(Consider, for example, a BUG() that fires in a workqueue, or while
holding a spinlock).
Most of these BUG's won't do much more than kill an nfsd thread, but it
would still probably be safer to get out the warning without dying.
There's still more of this to do in nfsd/.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Our server rejects compounds containing more than one write operation.
It's unclear whether this is really permitted by the spec; with 4.0,
it's possibly OK, with 4.1 (which has clearer limits on compound
parameters), it's probably not OK. No client that we're aware of has
ever done this, but in theory it could be useful.
The source of the limitation: we need an array of iovecs to pass to the
write operation. In the worst case that array of iovecs could have
hundreds of elements (the maximum rwsize divided by the page size), so
it's too big to put on the stack, or in each compound op. So we instead
keep a single such array in the compound argument.
We fill in that array at the time we decode the xdr operation.
But we decode every op in the compound before executing any of them. So
once we've used that array we can't decode another write.
If we instead delay filling in that array till the time we actually
perform the write, we can reuse it.
Another option might be to switch to decoding compound ops one at a
time. I considered doing that, but it has a number of other side
effects, and I'd rather fix just this one problem for now.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The comment here is totally bogus:
- OP_WRITE + 1 is RELEASE_LOCKOWNER. Maybe there was some older
version of the spec in which that served as a sort of
OP_ILLEGAL? No idea, but it's clearly wrong now.
- In any case, I can't see that the spec says anything about
what to do if the client sends us less ops than promised.
It's clearly nutty client behavior, and we should do
whatever's easiest: returning an xdr error (even though it
won't be consistent with the error on the last op returned)
seems fine to me.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Very embarassing: 1091006c5e "nfsd: turn
on reply cache for NFSv4" missed a line, effectively leaving the reply
cache off in the v4 case. I thought I'd tested that, but I guess not.
This time, wrote a pynfs test to confirm it works.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
