Commit graph

349,476 commits

Author SHA1 Message Date
Amerigo Wang
f4d5392e5f vlan: use IS_ENABLED()
#if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE)

can be replaced by

#if IS_ENABLED(CONFIG_FOO)

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:41:35 -04:00
Amerigo Wang
07a936260a ipv6: use IS_ENABLED()
#if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE)

can be replaced by

#if IS_ENABLED(CONFIG_FOO)

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:41:35 -04:00
Nicolas Dichtel
cc535dfb6a rtnl/ipv4: use netconf msg to advertise rp_filter status
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:41:34 -04:00
stephen hemminger
b77bc2069d ppp: make ppp_get_stats64 static
This was picked up by sparse.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:38:31 -04:00
Frank Li
6605b730c0 FEC: Add time stamping code and a PTP hardware clock
This patch adds a driver for the FEC(MX6) that offers time
stamping and a PTP haderware clock. Because FEC\ENET(MX6)
hardware frequency adjustment is complex, we have implemented
this in software by changing the multiplication factor of the
timecounter.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:28:44 -04:00
Frank Li
d6e0d9fcbb ARM: imx6q: Set enet tx reference clk from anatop to support 1588
Set GRP1 BIT21 ENET_CLK_SEL:
  Enet tx reference clk from internal clock from anatop
  (loopback through pad), this clock also sent out to external PHY

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:28:05 -04:00
Frank Li
7629838ca3 ARM: dts: imx6q: Add ENET PTP clock pin and clock source
Add ENET 1588 clock input pin
MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT
and anatop PLL8 clock source for ENET

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:28:05 -04:00
Frank Li
405f257f46 net: fec: move fec_enet_private to header file
A new file fec_ptp.c will use fec_enet_private to support 1588 PTP
move such structure to common header file fec.h

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:28:05 -04:00
Hannes Frederic Sowa
23ea5a9637 veth: allow changing the mac address while interface is up
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:26:10 -04:00
Richard Cochran
2e5b38abcf cpsw: support the HWTSTAMP ioctl and the CPTS
This patch hooks into the CPTS code and adds support for the HWTSTAMP
ioctl. The patch includes code for the CPSW version found in the dm814x
even though the background device tree support for this board is still
missing.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:21:32 -04:00
Richard Cochran
00ab94eeaf cpts: specify the input clock frequency via DT
This patch adds a way to configure the CPTS input clock scaling factors
via the device tree.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:21:32 -04:00
Richard Cochran
78ca0b2873 cpsw: add a DT field for the active time stamping port
Because time stamping on both external ports of the switch simultaneously
is positively useless from the application's point of view, this patch
provides a DT configuration method to choose the active port.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:21:32 -04:00
Richard Cochran
6b60393e08 cpsw: add a DT field for the cpts offset
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:21:32 -04:00
Richard Cochran
87c0e764d4 cpts: introduce time stamping code and a PTP hardware clock.
This patch adds a driver for the CPTS that offers time
stamping and a PTP hardware clock. Because some of the
CPTS hardware variants (like the am335x) do not support
frequency adjustment, we have implemented this in software
by changing the multiplication factor of the timecounter.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:21:30 -04:00
Richard Cochran
9750a3ade7 cpsw: support both silicon versions
This patch fixes the cpsw driver to operate correctly with both the
dm814x and the am335x versions of the switch hardware.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:21:30 -04:00
Richard Cochran
e90cfac6c2 cpsw: remember the silicon version
This patch lets the CPSW driver remember the version number in order to
support the two different variants already in the wild.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:21:29 -04:00
Richard Cochran
bd357af2a5 cpsw: add missing fields to the CPSW_SS register bank.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:21:29 -04:00
Richard Cochran
996a5c2788 cpsw: rename register banks to match the reference manual
The code mixes up the CPSW_SS and the CPSW_WR register naming. This patch
changes the names to conform to the published Technical Reference Manual
from TI, in order to make working on the code less confusing.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:21:29 -04:00
Mugunthan V N
5c50a856d5 drivers: net: ethernet: cpsw: add multicast address to ALE table
Adding multicast address to ALE table via netdev ops to subscribe, transmit
or receive multicast frames to and from the network

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:21:29 -04:00
Jon Hunter
3b3132f7e8 ARM: dts: OMAP5: Add counter node
Add the 32kHz counter node for OMAP5 devices.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-01 17:04:30 +01:00
Jon Hunter
df692a9251 ARM: dts: OMAP5: Add timer nodes
Add the 11 timer nodes for OMAP5 devices.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-01 17:04:00 +01:00
Jon Hunter
d03a93bbec ARM: dts: OMAP4: Update timer addresses
For OMAP4 devices, timers 5-8 have both a L3 bus address and a Cortex-A9
private bus address. Currently the device-tree source only contains the
L3 bus address for these timers. Update these timers to include the
Cortex-A9 private address and make the default address the Cortex-A9
private bus address to match the current HWMOD implementation.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-01 17:03:31 +01:00
Trond Myklebust
f9b1ef5f06 NFSv4: Initialise the NFSv4.1 slot table highest_used_slotid correctly
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-01 12:02:03 -04:00
Julian Anastasov
2c42a3fb30 tcp: Fix double sizeof in new tcp_metrics code
Fix double sizeof when parsing IPv6 address from
user space because it breaks get/del by specific IPv6 address.

	Problem noticed by David Binderman:

https://bugzilla.kernel.org/show_bug.cgi?id=49171

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 11:59:08 -04:00
Jesper Dangaard Brouer
8f363b77ee net: fix divide by zero in tcp algorithm illinois
Reading TCP stats when using TCP Illinois congestion control algorithm
can cause a divide by zero kernel oops.

The division by zero occur in tcp_illinois_info() at:
 do_div(t, ca->cnt_rtt);
where ca->cnt_rtt can become zero (when rtt_reset is called)

Steps to Reproduce:
 1. Register tcp_illinois:
     # sysctl -w net.ipv4.tcp_congestion_control=illinois
 2. Monitor internal TCP information via command "ss -i"
     # watch -d ss -i
 3. Establish new TCP conn to machine

Either it fails at the initial conn, or else it needs to wait
for a loss or a reset.

This is only related to reading stats.  The function avg_delay() also
performs the same divide, but is guarded with a (ca->cnt_rtt > 0) at its
calling point in update_params().  Thus, simply fix tcp_illinois_info().

Function tcp_illinois_info() / get_info() is called without
socket lock.  Thus, eliminate any race condition on ca->cnt_rtt
by using a local stack variable.  Simply reuse info.tcpv_rttcnt,
as its already set to ca->cnt_rtt.
Function avg_delay() is not affected by this race condition, as
its called with the socket lock.

Cc: Petr Matousek <pmatouse@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 11:55:59 -04:00
Masanari Iida
d3e9a1dc7c net: sctp: Fix typo in net/sctp
Correct spelling typo in net/sctp/socket.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 11:55:19 -04:00
Tekkaman Ninja
bb3215e97b Documentation: Fixes a term's translation in Documentation/zh_CN/arm64/memory.txt
Fixes a term's translation in Documentation/zh_CN/arm64/memory.txt
The modification is based on Catalin Marinas <catalin.marinas@arm.com>'s
suggestion:
    "memory" in "ffffffc000000000 ffffffffffffffff 256GB memory"
    should  be treated as "kernel logical memory map",
    so the translation should be "内核逻辑内存映射".

Signed-off-by: Fu Wei <tekkamanninja@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:54:59 -07:00
nikolay@redhat.com
c84e1590d1 bonding: fix second off-by-one error
Fix off-by-one error because IFNAMSIZ == 16 and when this
code gets executed we stick a NULL byte where we should not.

How to reproduce:
 with CONFIG_CC_STACKPROTECTOR=y (otherwise it may pass by silently)
 modprobe bonding; echo 1 > /sys/class/net/bond0/bonding/mode;
 echo "AAAAAAAAAAAAAAAA" > /sys/class/net/bond0/bonding/active_slave;

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>

Note: Sorry for the second patch but I missed this one while checking
      the file. You can squash them into one patch.
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 11:53:44 -04:00
nikolay@redhat.com
eb6e98a1b2 bonding: fix off-by-one error
Fix off-by-one error because IFNAMSIZ == 16 and when this
code gets executed we stick a NULL byte where we should not.

How to reproduce:
 with CONFIG_CC_STACKPROTECTOR=y (otherwise it may pass by silently)
 modprobe bonding; echo 1 > /sys/class/net/bond0/bonding/mode;
 echo "AAAAAAAAAAAAAAAA" > /sys/class/net/bond0/bonding/primary;

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 11:53:43 -04:00
Alan Stern
99f91934a9 USB: EHCI: make ehci-platform a separate driver
This patch (as1626) splits the ehci-platform code from ehci-hcd out
into its own separate driver module.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:51:13 -07:00
Alan Stern
adfa79d1c0 USB: EHCI: make ehci-pci a separate driver
This patch (as1625) splits the PCI portion of ehci-hcd out into its
own separate driver module, called ehci-pci.  Consistently with the
current practice, the decision whether to build this module is not
user-configurable.  If EHCI and PCI are enabled then the module will
be built, always.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:51:12 -07:00
Alan Stern
3e02320399 USB: EHCI: prepare to make ehci-hcd a library module
This patch (as1624) prepares ehci-hcd for being split up into a core
library and separate platform driver modules.  A generic
ehci_hc_driver structure is created, containing all the "standard"
values, and a new mechanism is added whereby a driver module can
specify a set of overrides to those values.  In addition the
ehci_setup(), ehci_suspend(), and ehci_resume() routines need to be
EXPORTed for use by the drivers.

As a side effect of this change, a few routines no longer need to be
marked __maybe_unused.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:51:12 -07:00
Weston Andros Adamson
d24bab93e4 SUNRPC: return proper errno from backchannel_rqst
The one and only caller (in fs/nfs/nfs4client.c) uses the result
as an errno and would have interpreted an error as EPERM.

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-01 11:50:53 -04:00
Wei Yongjun
76cc43868c tty: of_serial: fix return value check in of_platform_serial_setup()
In case of error, the function clk_get() returns ERR_PTR()
and never returns NULL. The NULL test in the return value
check should be replaced with IS_ERR().

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:50:01 -07:00
chao bi
31fe990488 serial:ifx6x60:Prevent data transfer when IFX6x60 port is shutdown
This patch is to implement following 2 places to avoid potential error when IFX6x60 port shutdown:
1) Clear Flag IFX_SPI_STATE_IO_AVAILABLE to disable data transfer when Modem port is shutdown;
2) Clear Flag IFX_SPI_STATE_IO_IN_PROGRESS and IFX_SPI_STATE_IO_READY when reopen port.
This is because last port shutdown may happen when SPI/DMA transfer is in progress, if the last
data transfer is not completed(for example due to modem reset), the Flag IFX_SPI_STATE_IO_IN_PROGRESS
will be set forever, so when IFX port is activated again, IFX_SPI_STATE_IO_IN_PROGRESS will prevent
transferring data forever. And if don't clear IFX_SPI_STATE_IO_READY, it may cause one more SPI frame
transferring in spit there is not data need to be transfer.

cc: liu chuansheng <chuansheng.liu@intel.com>
cc: Chen Jun <jun.d.chen@intel.com>
Signed-off-by: channing <chao.bi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:50:01 -07:00
Devendra Naga
986842dd57 staging: csr: csr_wifi_nme_task.h: remove function prototypes
there are function definitions missing for these prototypes, so
remove all 3 function protos.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:48:56 -07:00
Devendra Naga
4a530183f5 staging: csr: csr_wifi_nme_ap_lib.h: remove the function prototypes
these function prototypes are missing the function definition,
remove them all.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:48:56 -07:00
Devendra Naga
1454201f2d staging: csr: csr_wifi_nme_lib.h: remove function prototypes
the function definitions are missing for these prototypes, so remove all
these.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:48:56 -07:00
Devendra Naga
a6de05d87a staging: csr: sme_blocking.c: add missing check for return of sme_wait_for_reply
sme_ap_config misses a check of the return of the sme_wait_for_reply
as all other functions do here, for the return of sme_wait_for_reply
add the check and fail if it returns other than 0.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:48:56 -07:00
Devendra Naga
6d700d72c9 staging: csr: sme_blocking.c: remove braces around single statement blocks
remove the braces around single statement if blocks

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:48:55 -07:00
Devendra Naga
3b7ffa6fc0 staging: csr: sme_blocking.c: replace spaces with the tabs in sme_mgt_tspec
replace spaces at start of line with tabs in sme_mgt_tspec

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:48:55 -07:00
Devendra Naga
dc958bbad3 staging: csr: sme_blocking.c: replace spaces with tabs
replace spaces at the beginning of the line with tabs in sme_mgt_packet_filter_set

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:48:55 -07:00
Devendra Naga
79caaba624 staging: csr: inet.c: replaces spaces with tabs
replace spaces with tabs at the start of line

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:48:55 -07:00
Devendra Naga
d05b25b97c staging: csr: inet.c: single statement if blocks doesn't need braces
remove braces to single statement if blocks

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:48:55 -07:00
Ian Abbott
6192756574 staging: comedi: skel: do auto-attachment of PCI devices
This driver is an example of how to write a Comedi driver and includes
some code for handling PCI devices, but not very much.  It calls
`comedi_pci_auto_config()` at PCI probe time.  That normally expects to
call the comedi driver's `auto_attach()` hook (or the deprecated
`attach_pci()` hook), but will fall back to using the `attach()` hook
that should only be used for attaching devices "manually" via the
`COMEDI_DEVCONFIG` ioctl.

Add an `auto_attach()` hook (`skel_auto_attach()`) to handle
auto-attachment of supported PCI devices.  Add comments to the
`attach()` hook (`skel_attach()`) to indicate that it shouldn't
generally allow PCI devices to be attached that way (and probably isn't
needed at all for PCI-only Comedi drivers).  Add code to the `detach()`
hook (`skel_detach()`) to disable PCI devices enabled by the
`auto_attach()` hook.

`skel_auto_attach()` calls new function `skel_find_pci_board()` to find
a matching element in `skel_boards[]`.  PCI device ID information has
been added to `skel_boards[]` to give the function something to look
for.

Remove the `pci_dev` member of `struct skel_private` as drivers now use
the `hw_dev` member of `struct comedi_device` to get at the PCI device.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:46:02 -07:00
Ian Abbott
d8d7a82340 staging: comedi: skel: move skel_pci_table
Move `skel_pci_table[]` closer to `skel_pci_table` so it falls within
the same `#ifdef`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:46:02 -07:00
Ian Abbott
753b18d39f staging: comedi: skel: remove remaining forward declaration
Move `skel_ns_to_timer()` up so it's forward declaration can be removed.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:46:02 -07:00
Ian Abbott
d8cba40472 staging: comedi: skel: remove most forward declarations
Move `skel_attach()`, `skel_detach()` and `skel_driver` down the file so
that a bunch of forward declarations can be removed.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:46:02 -07:00
Ian Abbott
b61b2b1f58 staging: comedi: skel: use module_comedi_pci_driver()
Use the `module_comedi_pci_driver()` macro to register the module as a
comedi PCI driver instead of adding the boiler-plate code in full.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:46:02 -07:00
Ian Abbott
6bdc31dbab staging: comedi: skel: remove driver_ prefix
Remove the `driver_` prefix from variable and function names.  Rename
`driver_skel` to `skel_driver`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 08:46:01 -07:00