Commit graph

349,476 commits

Author SHA1 Message Date
David S. Miller
157083811c included changes:
- some code cleanups and minor fixes (3 of them were reported by Coverity)
 - 'struct hard_iface' re-shaping to improve multi-protocol support
 - ECTP packets silent drop
 - transfer the WIFI flag on clients in case of roaming
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlCOQzIACgkQpGgxIkP9cwdjVgCgmTSMNhAOvIWG/8dV6iiAvDeP
 bwIAnjZb5QeF/d4L+lRuqw5hMVTEQnJo
 =SAxj
 -----END PGP SIGNATURE-----

Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge

included changes:
- some code cleanups and minor fixes (3 of them were reported by Coverity)
- 'struct hard_iface' re-shaping to improve multi-protocol support
- ECTP packets silent drop
- transfer the WIFI flag on clients in case of roaming
2012-10-31 13:52:52 -04:00
stephen hemminger
3c172868cb vxlan: don't expire permanent entries
VXLAN confused flag versus bitmap on state.
Based on part of a earlier patch by David Stevens.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 13:42:12 -04:00
Wei Yongjun
1627801def qla3xxx: remove unused variable in ql_process_mac_tx_intr()
The variable retval is initialized but never used
otherwise, so remove the unused variable.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 13:35:52 -04:00
Wei Yongjun
680d86699d qla3xxx: use module_pci_driver to simplify the code
Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 13:35:51 -04:00
Steve Glendinning
bbd9f9ee69 smsc95xx: add wol support for more frame types
This patch adds support for wol wakeup on unicast, broadcast,
multicast and arp frames.

The wakeup filter code isn't pretty, but it works.

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 13:32:36 -04:00
Claudio Fontana
9ecd1c3d6c net/ipv4/ipconfig: add device address to a KERN_INFO message
adds a "hwaddr" to the "IP-Config: Complete" KERN_INFO message
with the dev_addr of the device selected for auto configuration.

Signed-off-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 13:23:00 -04:00
John Fastabend
815cccbf10 ixgbe: add setlink, getlink support to ixgbe and ixgbevf
This adds support for the net device ops to manage the embedded
hardware bridge on ixgbe devices. With this patch the bridge
mode can be toggled between VEB and VEPA to support stacking
macvlan devices or using the embedded switch without any SW
component in 802.1Qbg/br environments.

Additionally, this adds source address pruning to the ixgbevf
driver to prune any frames sent back from a reflective relay on
the switch. This is required because the existing hardware does
not support this. Without it frames get pushed into the stack
with its own src mac which is invalid per 802.1Qbg VEPA
definition.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 13:18:29 -04:00
John Fastabend
2469ffd723 net: set and query VEB/VEPA bridge mode via PF_BRIDGE
Hardware switches may support enabling and disabling the
loopback switch which puts the device in a VEPA mode defined
in the IEEE 802.1Qbg specification. In this mode frames are
not switched in the hardware but sent directly to the switch.
SR-IOV capable NICs will likely support this mode I am
aware of at least two such devices. Also I am told (but don't
have any of this hardware available) that there are devices
that only support VEPA modes. In these cases it is important
at a minimum to be able to query these attributes.

This patch adds an additional IFLA_BRIDGE_MODE attribute that can be
set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also
anticipating bridge attributes that may be common for both embedded
bridges and software bridges this adds a flags attribute
IFLA_BRIDGE_FLAGS currently used to determine if the command or event
is being generated to/from an embedded bridge or software bridge.
Finally, the event generation is pulled out of the bridge module and
into rtnetlink proper.

For example using the macvlan driver in VEPA mode on top of
an embedded switch requires putting the embedded switch into
a VEPA mode to get the expected results.

	--------  --------
        | VEPA |  | VEPA |       <-- macvlan vepa edge relays
        --------  --------
           |        |
           |        |
        ------------------
        |      VEPA      |       <-- embedded switch in NIC
        ------------------
                |
                |
        -------------------
        | external switch |      <-- shiny new physical
	-------------------          switch with VEPA support

A packet sent from the macvlan VEPA at the top could be
loopbacked on the embedded switch and never seen by the
external switch. So in order for this to work the embedded
switch needs to be set in the VEPA state via the above
described commands.

By making these attributes nested in IFLA_AF_SPEC we allow
future extensions to be made as needed.

CC: Lennert Buytenhek <buytenh@wantstofly.org>
CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 13:18:29 -04:00
John Fastabend
e5a55a8987 net: create generic bridge ops
The PF_BRIDGE:RTM_{GET|SET}LINK nlmsg family and type are
currently embedded in the ./net/bridge module. This prohibits
them from being used by other bridging devices. One example
of this being hardware that has embedded bridging components.

In order to use these nlmsg types more generically this patch
adds two net_device_ops hooks. One to set link bridge attributes
and another to dump the current bride attributes.

	ndo_bridge_setlink()
	ndo_bridge_getlink()

CC: Lennert Buytenhek <buytenh@wantstofly.org>
CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31 13:18:28 -04:00
Tony Lindgren
bb77209432 ARM: OMAP: Move omap2+ specific parts of sram.c to mach-omap2
Let's make the omap2+ specific parts private to mach-omap2.

This leaves just a minimal shared code into plat-omap like
it should be.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-31 10:14:14 -07:00
Tony Lindgren
f205cfaf6c ARM: OMAP: Move omap1 specific code to local sram.c
Let's make the omap1 specific parts private to mach-omap1.
These should not be in the shared code.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-31 10:14:14 -07:00
Tony Lindgren
d8cfd6c8b4 ARM: OMAP: Introduce common omap_map_sram() and omap_sram_reset()
This will allow us to separate out omap1 and omap2+ specific
code in the later patches.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-31 10:14:13 -07:00
Tony Lindgren
bf027ca137 ARM: OMAP: Split sram.h to local headers and minimal shared header
Most of the defines are specific to omap1 and omap2+,
and should be in the local headers. Only minimal function
prototypes need to be shared.

As discussed on linux-arm-kernel, we want to avoid
relative includes for the arch/arm/*omap* shared code:

http://www.spinics.net/lists/linux-omap/msg80520.html

So this patch re-adds a minimal plat/sram.h.

The new plat/sram.h must not be included from drivers,
that will break build for omap2+ CONFIG_MULTIPLATFORM.

Note that this patch temporarily adds two more
relative includes; Those will be removed in the
following patch.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-31 10:14:13 -07:00
Bryan Schumaker
399f11c3d8 NFS: Wait for session recovery to finish before returning
Currently, we will schedule session recovery and then return to the
caller of nfs4_handle_exception.  This works for most cases, but causes
a hang on the following test case:

	Client				Server
	------				------
	Open file over NFS v4.1
	Write to file
					Expire client
	Try to lock file

The server will return NFS4ERR_BADSESSION, prompting the client to
schedule recovery.  However, the client will continue placing lock
attempts and the open recovery never seems to be scheduled.  The
simplest solution is to wait for session recovery to run before retrying
the lock.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
2012-10-31 13:13:28 -04:00
John W. Linville
0627291148 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2012-10-31 13:10:01 -04:00
Konrad Rzeszutek Wilk
95a7d76897 xen/mmu: Use Xen specific TLB flush instead of the generic one.
As Mukesh explained it, the MMUEXT_TLB_FLUSH_ALL allows the
hypervisor to do a TLB flush on all active vCPUs. If instead
we were using the generic one (which ends up being xen_flush_tlb)
we end up making the MMUEXT_TLB_FLUSH_LOCAL hypercall. But
before we make that hypercall the kernel will IPI all of the
vCPUs (even those that were asleep from the hypervisor
perspective). The end result is that we needlessly wake them
up and do a TLB flush when we can just let the hypervisor
do it correctly.

This patch gives around 50% speed improvement when migrating
idle guest's from one host to another.

Oracle-bug: 14630170

CC: stable@vger.kernel.org
Tested-by:  Jingjie Jiang <jingjie.jiang@oracle.com>
Suggested-by:  Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-31 12:38:31 -04:00
Emmanuel Grumbach
0daf7d9605 iwlwifi: don't call stop_device twice
When we unregister from mac80211 it will down the device anyway.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-31 17:06:09 +01:00
David Spinadel
bca1e29fb5 mac80211: init sched_scan_ies
In case that there is an unsupported band, the ie will be
unallocated and the free will crash.

Cc: stable@vger.kernel.org
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-31 17:04:18 +01:00
Emmanuel Grumbach
f946b52950 iwlwifi: handle RFKILL logic in the transport layer
No HCMD can be sent while RFKILL is asserted. If a SYNC
command is running while RFKILL is asserted the fw will
silently discard it. This means that the driver needs to
wake the process that sleeps on the CMD_SYNC.

Since the RFKILL interrupt is handled in the transport layer
and the code that sleeps in CMD_SYNC is also in the transport
layer, all this logic can be handled there.
This simplifies the work of the op_mode.

So the transport layer will now return -ERFKILL when a CMD
is sent and RFKILL is asserted. This will be the case even
when the CMD is SYNC. The transport layer will return
-ERFKILL straight away.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-31 17:02:06 +01:00
Felix Fietkau
35f5149ead mac80211: do not call ieee80211_configure_filter if no interfaces are up
Drivers are not expected to handle it before drv_start has been called. It
will be called again after an interface has been brought up.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-31 16:53:34 +01:00
Ingo Ruhnke
f8e86d0546 HID: fix incorrect handling of devices with high button count
Button names for USB gamepads are currently assigned incorrectly, as the evdev
code assigned to buttons is "BTN_GAMEPAD + code", which on devices with more
then 16 buttons bleeds over into button names reserved for graphic tablets
(BTN_TOOL_PEN, etc.). This causes problems further down the line as the device
are now no longer detected as joystick. This patch fixes that by assigning
buttons outside the range to BTN_TRIGGER_HAPPY (as is already the case for USB
joysticks).

Furthermore this patch corrects the assignment to BTN_TRIGGER_HAPPY, as
currently the first button over 16 is assigned to BTN_TRIGGER_HAPPY17 (i.e.
BTN_TRIGGER_HAPPY+0x10) not BTN_TRIGGER_HAPPY.

Signed-off-by: Ingo Ruhnke <grumbel@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31 16:03:32 +01:00
Jiri Kosina
c10354d4a6 HID: remove spurious brackets for iCade
Remove spurious brackets in Kconfig for hid-icade.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31 15:54:34 +01:00
Bastien Nocera
4ddfe0289b HID: Add driver for ION iCade
Add a driver for the ION iCade mini arcade cabinet [1]. The device generates a
key press and release for each joystick movement or button press or release.
For example, moving the stick to the left will generate the "A" key being
pressed and then released.

A list of all the combinations is available in the iCade developer guide [2].

This driver hides all this and makes the device work as a generic joystick.

[1]: http://www.ionaudio.com/products/details/icade
[2]: http://www.ionaudio.com/downloads/iCade_Dev_Resource_v1.3.pdf

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31 15:52:59 +01:00
Andi Kleen
ffadcf090d perf annotate: Handle XBEGIN like a jump
So that the browser still shows the abort label.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1351643663-23828-18-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-31 12:18:26 -02:00
Arnaldo Carvalho de Melo
688b2c2f17 perf tools: Handle --version string generation on machines without git
If git is installed we'll have a 'perf --version' output of this form:

$ make -j8 -C tools/perf/ O=/home/acme/git/build/perf install
$ perf --version
perf version 3.7.rc3.g3afad6

Now on a machine without git installed:

$ mv  /home/acme/bin/git /home/acme/bin/git.OFF
$ make -j8 -C tools/perf/ O=/home/acme/git/build/perf install
$ perf --version
perf version 3.7.0-rc2

That is, no error message due to git not being installed will appear on the
screen and instead the version string in the top level Makefile will be
used.

Requested-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-am6yp6phvxyjmyndxogpunjv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-31 12:17:49 -02:00
Ingo Molnar
0e2af95669 perf tools: Further speed up the perf build
There's another source of overhead in the perf version string generator:

   git update-index -q --refresh

... which will iterate the whole checked out tree. This can be pretty
slow on NFS volumes, but takes some time even with local SSD disks and a
fully cached kernel tree:

 $ perf stat --null --repeat 3 --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN
 PERF_VERSION = 3.7.rc3.g5399b3b.dirty
 PERF_VERSION = 3.7.rc3.g5399b3b.dirty
 PERF_VERSION = 3.7.rc3.g5399b3b.dirty

 Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs):

       0.306999221 seconds time elapsed                                          ( +-  0.56% )

So remove the .dirty differentiator as well - it adds little information
because locally patched git trees are common, but seldom are the perf
tools modified.

So a lot of version strings are reported as 'dirty' while in fact they
are pristine perf builds. For example 99% of my perf builds are not
patched but the kernel tree is slightly patched, which adds the .dirty
tag.

Eliminating that tag speeds up version generation by another order of
magnitude:

 $ perf stat --null --repeat 3 --sync --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN
 PERF_VERSION = 3.7.rc3.g4b0bd3
 PERF_VERSION = 3.7.rc3.g4b0bd3
 PERF_VERSION = 3.7.rc3.g4b0bd3

 Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs):

       0.021270923 seconds time elapsed                                          ( +-  1.94% )

(Also clean up some of the comments around this code.)

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20121030085441.GC8245@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-31 12:17:49 -02:00
Ingo Molnar
acddedfba0 perf tools: Speed up the perf build time by simplifying the perf --version string generation
Building perf is pretty slow on trees that have a lot of commits
relative to the nearest Git tag. This slowness manifests itself during
version string generation:

 $ perf stat --null --repeat 3 --sync --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN
 PERF_VERSION = 3.7.rc3.1458.g5399b3b
 PERF_VERSION = 3.7.rc3.1458.g5399b3b
 PERF_VERSION = 3.7.rc3.1458.g5399b3b

 Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs):

       2.857503976 seconds time elapsed                                          ( +-  0.22% )

The build can be even slower than that, when one over NFS volumes.

The reason for the slowness is that util/PERF-VERSION-GEN uses "git
describe" to generate the string, which has to count the "number of
commits distance" from the nearest tag - the ".1458." count in the
output above. For that Git had to extract and decompress 1458 Git
objects, which takes time and bandwidth.

But this "number of commits" value is mostly irrelevant in practice. We
either want to know an approximate tag name, or we want to know the
precise sha1.

So this patch simplifies the version string to:

 PERF_VERSION = 3.7.rc3.g5399b3b.dirty

which speeds up the version string generation script by an order of
magnitude:

 $ perf stat --null --repeat 3 --sync --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN
 PERF_VERSION = 3.7.rc3.g5399b3b.dirty
 PERF_VERSION = 3.7.rc3.g5399b3b.dirty
 PERF_VERSION = 3.7.rc3.g5399b3b.dirty

 Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs):

       0.307633559 seconds time elapsed                                          ( +-  0.84% )

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20121030084600.GB8245@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-31 12:17:49 -02:00
Joonsoo Kim
cd69ef88a7 perf tools: Add info about cross compiling for Android ARM
Without defining ARCH=arm, building perf for Android ARM will fail,
because it needs architecture specific files.

So add related relevant information to the android documentation.

Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Irina Tirdea <irina.tirdea@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1351518066-4791-1-git-send-email-js1304@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-31 12:17:49 -02:00
Namhyung Kim
d30ff29562 perf tools: Warn about missing libelf
When perf detects no libelf during the build, it'll use internal mini
elf parser instead of libelf.  But as it only supports minimal
functionalities, it also disables support to 'probe' builtin command.

Currently it didn't warned to user.  Fix it.

$ sudo apt-get remove libelf-dev
$ make
    CHK -fstack-protector-all
    CHK -Wstack-protector
    CHK -Wvolatile-register-var
    CHK bionic
    CHK libelf
    CHK glibc
Makefile:491: No libelf found, disables 'probe' tool, please install elfutils-libelf-devel/libelf-dev
    CHK libunwind
    CHK libaudit

$ make NO_LIBELF=1
    CHK -fstack-protector-all
    CHK -Wstack-protector
    CHK -Wvolatile-register-var
    CHK bionic
    CHK libaudit

Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-8ww8zc4hhpxabfskxs3u5ede@git.kernel.org
[ committer note: The package needed is elfutils-libelf-devel, not elfutils-devel ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-31 12:17:48 -02:00
Sebastian Andrzej Siewior
b18d26f6ad usb: musb: Perform only write access on MUSB_INTRTXE
This is part of the workaround for AM35x advisory Advisory 1.1.20.
The advisory says that the IPSS bridge can't handle 8 & 16 bit read
access. An 16bit read access to MUSB_INTRTXE results in an 32bit read
access which also reads INTRRX and therefore may lose interrupts.
This patch uses a shadow register of MUSB_INTRTXE so we only perform
write access to it.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:22:18 +02:00
Sebastian Andrzej Siewior
af5ec14d40 usb: musb: Perform only write access on MUSB_INTRRXE
This is part of the workaround for AM35x advisory Advisory 1.1.20.
The advisory says that the IPSS bridge can't handle 8 & 16 bit read
access. An 16bit read access to MUSB_INTRRXE results in an 32bit read
access which also reads INTRUSB and therefore may lose interrupts.
This patch uses a shadow register of MUSB_INTRRXE so we only perform
write access to it.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:22:03 +02:00
Sebastian Andrzej Siewior
515ba29cd7 usb: musb: avoid FADDR read access
This is part of the workaround for AM35x advisory Advisory 1.1.20.
The advisory says that the IPSS bridge can't handle 8 & 16 bit read
access. An 8bit read access to FADDR results in an 32bit read
access which also reads INTRTX and therefore may lose interrupts.
This patch removes any reads to FADDR as they are not really required.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:21:01 +02:00
Sebastian Andrzej Siewior
b11e94d037 usb: musb: read MUSB_POWER register only when required.
This is part of the workaround for AM35x advisory Advisory 1.1.20.
The advisory says that the IPSS bridge can't handle 8 & 16 bit read
access. An 8bit read access to MUSB_POWER results in an 32bit read
access which also reads INTRTX and therefore may lose interrupts.
This patch tries to minimize reads to MUSB_POWER and perform them only
when required.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:20:40 +02:00
Sebastian Andrzej Siewior
124dafde8f usb: dwc3: remove custom unique id handling
The lockless implementation of the unique id is quite impressive (:P)
but dirver's core can handle it, we can remove it and make our code a
little smaller.

Cc: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:18:52 +02:00
Sebastian Andrzej Siewior
b100a2f34d usb: gadget: dummy_hcd: remove global the_controller variable
The one thing that makes two UDCs+HCDs impossible is the global
the_controller variable. This patch changes this. After device
allocation we allocate the "the_controller" variable and pass it as
platform_data to the UDC and its companion.
We can have now multiple instances dummy hcd and therefore I change the
limit from one to two. I was able to test this with g_ncm adn g_zero:

|# lsusb
|Bus 001 Device 002: ID 0525:a4a0 Netchip Technology, Inc. Linux-USB "Gadget Zero"
|Bus 002 Device 002: ID 0525:a4a1 Netchip Technology, Inc. Linux-USB Ethernet Gadget
|Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
|Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

I was able to start testusb -a and ifconfig usb[01] up with no complains.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:18:01 +02:00
Sebastian Andrzej Siewior
c7a1db457b usb: gadget: dummy_hcd: add setup / cleanup of multiple HW intances
This patch creates & adds multiple instances of the HCD and UDC. We have
a new module option "num" which says how many emulated UDCs + HCDs we
want. The default value is one and currently the maximum is one as well.
This will change soon.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:17:07 +02:00
Sebastian Andrzej Siewior
b2113136a5 usb: gadget: dummy_hdc: prepare for multiple instances
This patch replaces the single pdev variable by an array. One change:
The device id is no longer -1 (i.e. none) but 0.
This is prepation work for multiple instances of the dummy_hcd + udc
which should help to test gadget framework with multiple UDCs.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:16:47 +02:00
Sebastian Andrzej Siewior
1616e99d42 usb: gadget: let f_* use usb_string_ids_tab() where it makes sense
Instead of calling usb_string_id() multiple times I replace it with one
usb_string_ids_tab(). The NULL pointer in struct usb_string with "" and
are not overwritten in fail or unbind case.

The conditional assignment remains because some gadgets recycle the string
ID because the same descriptor (and string ID) is used if we have more
than one config descriptor.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:11:47 +02:00
Rahul Sharma
2cdc53b355 drm: exynos: removed warning due to missing typecast for mixer driver data
Removing the warning by adding proper type casting where local pointer
variable of type mixer driver data is assigned with void pointer.

Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-10-31 06:11:40 -07:00
Rob Clark
9eb3e9e6f3 drm/exynos: add support for ARCH_MULTIPLATFORM
Exynos does not seem to have any dependency on anything from
platform headers so just needs Kconfig updated to build in
ARCH_MULTIPLATFORM builds.

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-10-31 06:11:36 -07:00
Inki Dae
25a5803037 MAINTAINERS: Add git repository for Exynos DRM
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-10-31 06:11:32 -07:00
Inki Dae
44c91697fb drm/exynos: fix display on issue
When crtc_funcs->dpms callback is called, exynos_crtc->dpms
and exynos_encoder->dpms are changed to new mode. But if user
requests dpms mode operation, OFF -> ON, when crtc's dpms callback
is called, exynos_encoder->dpms is also changed to ON. This
makes encoder's dpms callback call be ignored so display power
couldn't become on again.

This patch removes exynos_encoder->dpms changing and adds 'updated'
variable to exynos_drm_encoder structure to avoid duplicated overlay
updating.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-10-31 06:11:29 -07:00
Sebastian Andrzej Siewior
b36c347966 usb: gadget: uac2: use the strings directly
There is no need for this variable in between.

Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:10:37 +02:00
Sebastian Andrzej Siewior
4ce63571d6 usb: gadget: uac2: provide a variable for interface and alt settings
This patch removes the shifting and masking of interface and its alt
setting and provides its own variable.

This looks better and is smaller:
 text    data     bss     dec     hex filename
x86-32
 6940     956      56    7952    1f10 gadget/audio.o.old
 6908     956      56    7920    1ef0 gadget/audio.o.new
arm
 7914     956      56    8926    22de gadget/audio.o.old
 7886     956      56    8898    22c2 gadget/audio.o.new

Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:10:25 +02:00
Sebastian Andrzej Siewior
b7c041aada usb: gadget: remove DMA_ADDR_INVALID from f_uac2 and gadgetfs
DMA_ADDR_INVALID is used by the UDC driver and the gadgets should
provide only a buffer address. Everything else should be taken core of
by the UDC and udc-core.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:10:06 +02:00
Sebastian Andrzej Siewior
10287baec7 usb: gadget: always update HS/SS descriptors and create a copy of them
HS and SS descriptors are staticaly created. They are updated during the
bind process with the endpoint address, string id or interface numbers.

After that, the descriptor chain is linked to struct usb_function which
is used by composite in order to serve the GET_DESCRIPTOR requests,
number of available configs and so on.

There is no need to assign the HS descriptor only if the UDC supports
HS speed because composite won't report those to the host if HS support
has not been reached. The same reasoning is valid for SS.

This patch makes sure each function updates HS/SS descriptors
unconditionally and uses the newly introduced helper function to create a
copy the descriptors for the speed which is supported by the UDC.

While at that, also rename f->descriptors to f->fs_descriptors in order
to make it more explicit what that means.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:09:44 +02:00
Sebastian Andrzej Siewior
0f9df93938 usb: gadget: uvc: fix error path in uvc_function_bind()
The "video->minor = -1" assigment is done in V4L2 by
video_register_device() so it is removed here.
Now. uvc_function_bind() calls in error case uvc_function_unbind() for
cleanup. The problem is that uvc_function_unbind() frees the uvc struct
and uvc_bind_config() does as well in error case of usb_add_function().
Removing kfree() in usb_add_function() would make the patch smaller but
it would look odd because the new allocated memory is not cleaned up.
However it is not guaranteed that if we call usb_add_function() we also
get to the bind function.
Therefore the patch extracts the conditional cleanup from
uvc_function_unbind() applies to uvc_function_bind().
uvc_function_unbind() now contains only the complete cleanup which is
required once everything has been registrated.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Bhupesh Sharma <bhupesh.sharma@st.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:07:00 +02:00
Sebastian Andrzej Siewior
d0eca719dd usb: gadget: phonet: free requests in pn_bind()'s error path
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:05:55 +02:00
Sebastian Andrzej Siewior
7f2a9268b4 usb: gadget: midi: make FS and HS available
This function works only on FS or HS. If the gadget is HS capable only
HS descriptors are assigned. If we plug it to an 1.1 host it won't work
because we have only 2.0 descriptors. This patch changes the behavior to
provide both sets.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:05:37 +02:00
Sebastian Andrzej Siewior
d185039f79 usb: gadget: midi: free hs descriptors
The HS descriptors are only created if HS is supported by the UDC but we
never free them.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:05:20 +02:00