Commit graph

349,476 commits

Author SHA1 Message Date
Matt Fleming
3e8fa263a9 x86/efi: Fix oops caused by incorrect set_memory_uc() usage
Calling __pa() with an ioremap'd address is invalid. If we
encounter an efi_memory_desc_t without EFI_MEMORY_WB set in
->attribute we currently call set_memory_uc(), which in turn
calls __pa() on a potentially ioremap'd address.

On CONFIG_X86_32 this results in the following oops:

  BUG: unable to handle kernel paging request at f7f22280
  IP: [<c10257b9>] reserve_ram_pages_type+0x89/0x210
  *pdpt = 0000000001978001 *pde = 0000000001ffb067 *pte = 0000000000000000
  Oops: 0000 [#1] PREEMPT SMP
  Modules linked in:

  Pid: 0, comm: swapper Not tainted 3.0.0-acpi-efi-0805 #3
   EIP: 0060:[<c10257b9>] EFLAGS: 00010202 CPU: 0
   EIP is at reserve_ram_pages_type+0x89/0x210
   EAX: 0070e280 EBX: 38714000 ECX: f7814000 EDX: 00000000
   ESI: 00000000 EDI: 38715000 EBP: c189fef0 ESP: c189fea8
   DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
  Process swapper (pid: 0, ti=c189e000 task=c18bbe60 task.ti=c189e000)
  Stack:
   80000200 ff108000 00000000 c189ff00 00038714 00000000 00000000 c189fed0
   c104f8ca 00038714 00000000 00038715 00000000 00000000 00038715 00000000
   00000010 38715000 c189ff48 c1025aff 38715000 00000000 00000010 00000000
  Call Trace:
   [<c104f8ca>] ? page_is_ram+0x1a/0x40
   [<c1025aff>] reserve_memtype+0xdf/0x2f0
   [<c1024dc9>] set_memory_uc+0x49/0xa0
   [<c19334d0>] efi_enter_virtual_mode+0x1c2/0x3aa
   [<c19216d4>] start_kernel+0x291/0x2f2
   [<c19211c7>] ? loglevel+0x1b/0x1b
   [<c19210bf>] i386_start_kernel+0xbf/0xc8

The only time we can call set_memory_uc() for a memory region is
when it is part of the direct kernel mapping. For the case where
we ioremap a memory region we must leave it alone.

This patch reimplements the fix from e8c7106280 ("x86, efi:
Calling __pa() with an ioremap()ed address is invalid") which
was reverted in e1ad783b12 because it caused a regression on
some MacBooks (they hung at boot). The regression was caused
because the commit only marked EFI_RUNTIME_SERVICES_DATA as
E820_RESERVED_EFI, when it should have marked all regions that
have the EFI_MEMORY_RUNTIME attribute.

Despite first impressions, it's not possible to use
ioremap_cache() to map all cached memory regions on
CONFIG_X86_64 because of the way that the memory map might be
configured as detailed in the following bug report,

	https://bugzilla.redhat.com/show_bug.cgi?id=748516

e.g. some of the EFI memory regions *need* to be mapped as part
of the direct kernel mapping.

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Huang Ying <huang.ying.caritas@gmail.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1350649546-23541-1-git-send-email-matt@console-pimps.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24 12:48:47 +02:00
Ma Ling
269833bd5a x86/asm: Clean up copy_page_*() comments and code
Modern CPUs use fast-string instruction to accelerate copy
performance, by combining data into 128 bit chunks.

Modify comments and coding style to match it.

Signed-off-by: Ma Ling <ling.ma@intel.com>
Cc: iant@google.com
Link: http://lkml.kernel.org/r/1350503565-19167-1-git-send-email-ling.ma@intel.com
[ Cleaned up the clean up. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24 12:42:47 +02:00
Cyrill Gorcunov
99fb4a122e lockdep: Use KSYM_NAME_LEN'ed buffer for __get_key_name()
Not a big deal, but since other __get_key_name() callers
use it lets be consistent.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20121020190519.GH25467@moon
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24 12:39:09 +02:00
Jan Schmidt
01763a2e37 Btrfs: comment for loop in tree_mod_log_insert_move
Emphasis the way tree_mod_log_insert_move avoids adding
MOD_LOG_KEY_REMOVE_WHILE_MOVING operations, depending on the direction of
the move operation.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-10-24 12:36:40 +02:00
Jan Schmidt
d638108484 Btrfs: fix extent buffer reference for tree mod log roots
In get_old_root we grab a lock on the extent buffer before we obtain a
reference on that buffer. That order is changed now.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-10-24 12:36:39 +02:00
Jan Schmidt
5b6602e762 Btrfs: determine level of old roots
In btrfs_find_all_roots' termination condition, we compare the level of the
old buffer we got from btrfs_search_old_slot to the level of the current
root node. We'd better compare it to the level of the rewinded root node.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-10-24 12:36:38 +02:00
Jan Schmidt
834328a849 Btrfs: tree mod log's old roots could still be part of the tree
Tree mod log treated old root buffers as always empty buffers when starting
the rewind operations. However, the old root may still be part of the
current tree at a lower level, with still some valid entries.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-10-24 12:36:37 +02:00
Vince Weaver
e4074b3049 perf/x86: Enable overflow on Intel KNC with a custom knc_pmu_handle_irq()
Although based on the Intel P6 design, the interrupt mechnanism
for KNC more closely resembles the Intel architectural
perfmon one.

We can't just re-use that code though, because KNC has different
MSR numbers for the status and ack registers.

In this case we just cut-and paste from perf_event_intel.c
with some minor changes, as it looks like it would not be
worth the trouble to change that code to be MSR-configurable.

Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: eranian@gmail.com
Cc: Meadows Lawrence F <lawrence.f.meadows@intel.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210171304410.23243@vincent-weaver-1.um.maine.edu
[ Small stylistic edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24 12:00:49 +02:00
Vince Weaver
7d011962af perf/x86: Remove cpuc->enable check on Intl KNC event enable/disable
x86_pmu.enable() is called from x86_pmu_enable() with
cpuc->enabled set to 0.  This means we weren't re-enabling the
counters after a context switch.

This patch just removes the check, as it should't be necessary
(and the equivelent x86_ generic code does not have the checks).

The origin of this problem is the KNC driver being based on the
P6 one.   The P6 driver also has this issue, but works anyway
due to various lucky accidents.

Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: eranian@gmail.com
Cc: Meadows
Cc: Lawrence F <lawrence.f.meadows@intel.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210171303290.23243@vincent-weaver-1.um.maine.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24 12:00:49 +02:00
Vince Weaver
ae5ba47a99 perf/x86: Make Intel KNC use full 40-bit width of counters
Early versions of Intel KNC chips have a bug where bits above 32
were not properly set.  We worked around this by only using the
bottom 32 bits (out of 40 that should be available).

It turns out this workaround breaks overflow handling.

The buggy silicon will in theory never be used in production
systems, so remove this workaround so we get proper overflow
support.

Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: eranian@gmail.com
Cc: Meadows Lawrence F <lawrence.f.meadows@intel.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210171302140.23243@vincent-weaver-1.um.maine.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24 12:00:48 +02:00
Mark Brown
6730049a47 ASoC: wm8994: Lower AIFnCLK divisor when dropping to 32kHz
When lowering SYSCLK to 50kHz for accessory detection also lower the
AIFnCLK divisor to normalise the clocking configuration within the
device. This will not disrupt audio as we cannot support active audio
with such a low SYSCLK.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-24 10:58:01 +01:00
Glauber Costa
1b4f59e356 slub: Commonize slab_cache field in struct page
Right now, slab and slub have fields in struct page to derive which
cache a page belongs to, but they do it slightly differently.

slab uses a field called slab_cache, that lives in the third double
word. slub, uses a field called "slab", living outside of the
doublewords area.

Ideally, we could use the same field for this. Since slub heavily makes
use of the doubleword region, there isn't really much room to move
slub's slab_cache field around. Since slab does not have such strict
placement restrictions, we can move it outside the doubleword area.

The naming used by slab, "slab_cache", is less confusing, and it is
preferred over slub's generic "slab".

Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Christoph Lameter <cl@linux.com>
CC: David Rientjes <rientjes@google.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-10-24 11:58:03 +03:00
Yan, Zheng
032c3851f5 perf/x86/uncore: Handle pci_read_config_dword() errors
This, beyond handling corner cases, also fixes some build warnings:

 arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function ‘snbep_uncore_pci_disable_box’:
 arch/x86/kernel/cpu/perf_event_intel_uncore.c:124:9: warning: ‘config’ is used uninitialized in this function [-Wuninitialized]
 arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function ‘snbep_uncore_pci_enable_box’:
 arch/x86/kernel/cpu/perf_event_intel_uncore.c:135:9: warning: ‘config’ is used uninitialized in this function [-Wuninitialized]
 arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function ‘snbep_uncore_pci_read_counter’:
 arch/x86/kernel/cpu/perf_event_intel_uncore.c:164:2: warning: ‘count’ is used uninitialized in this function [-Wuninitialized]

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Cc: a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/1351068140-13456-1-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24 10:57:03 +02:00
Stephane Grosjean
fc09e3672e can: sja1000: fix/add miniPCIe/cPCI PC/104Plus PCI/104e PEAK-System boards
This patch adds the support for 4 new PCI boards based on the SJA1000 CAN
controller, from PEAK-System Technik:

. PCAN-miniPCIe (PCI-Express Mini slots, available as single or dual-channel)
. PCAN-cPCI (CompactPCI format, available as single or dual-channel)
. PCAN-PC/104-Plus (PC/104-Plus system, av. as 1, 2 or 4 channels)
. PCAN-PCI/104-Express (PCI/104-Express system, av. as 1 or 2 channels)

This patch also fixes a typo in existing "PEAK_MPCI_DEVICE_ID" identifier
(missing "e" for Express). Finally, it also changes the author as well as it
updates the module supported devices list.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-24 10:53:49 +02:00
Jan Beulich
876ee61aad x86-64: Fix page table accounting
Commit 20167d3421 ("x86-64: Fix
accounting in kernel_physical_mapping_init()") went a little too
far by entirely removing the counting of pre-populated page
tables: this should be done at boot time (to cover the page
tables set up in early boot code), but shouldn't be done during
memory hot add.

Hence, re-add the removed increments of "pages", but make them
and the one in phys_pte_init() conditional upon !after_bootmem.

Reported-Acked-and-Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/506DAFBA020000780009FA8C@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24 10:50:25 +02:00
Mohammed Shafi Shajakhan
a2e1be33a2 ath6kl: Add a hardware flag for SDIO CRC error workaround
Make use of SDIO CRC error workaround hardware flag and avoid
target revision checks.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:57 +03:00
Mohammed Shafi Shajakhan
171fe76877 ath6kl: Fix mapping uplink endpoint for AR6004
AR6004(UB134) firmware supports only LP Endpoint, So map
all Access Categories to Low Priority endpoints. This fixes a WPA2
connection issue as the uplink(tx) endpoint is appropriately
mapped in sync with the firmware.

Tested-by: Ben Gray <ben.r.gray@gmail.com>
Reported-by: Ben Gray <ben.r.gray@gmail.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:57 +03:00
Mohammed Shafi Shajakhan
7ac25eacc6 ath6kl: Fix inactivity timeout for AR6004
Currently AR6004 handles the inactivity timeout resolution
in minutes rather than seconds. So parse the inactivity timeout
to the firmware in minutes. For now we will cleanup the
inactive station entries to the nearest converted minutes
(ex:  an inactive time of 70 seconds would take atleast 2 - 3 minutes)
Tested with surprise removal of client cards/host shutdown.

Cc: Manikandan Radhakrishnan <mradhakr@qca.qualcomm.com>
Reported-by: Leela Kella <leela@qca.qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:57 +03:00
Mohammed Shafi Shajakhan
c0b34e2b41 ath6kl: Rename ATH6KL_HW_FLAG_64BIT_RATES
Rename ATH6KL_HW_FLAG_64BIT_RATES to ATH6KL_HW_64BIT_RATES.
This seemed to be necessary to add/use new hardware flags
without exceeding 80 lines. We shall be adding new hw flags
dropping the FLAG term.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:56 +03:00
Mohammed Shafi Shajakhan
5dbdf6feec ath6kl: Return error case when ath6kl_usb_alloc_pipe_resources fails
Incase the resource allocation for the struct ath6kl_urb_context in the
function ath6kl_usb_alloc_pipe_resources fails, return this error
case so that ath6kl_usb_probe is aware of this error case.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:56 +03:00
Mohammed Shafi Shajakhan
cf0dfa1330 ath6kl: Remove obselete USB device related checks
These checks are no longer needed as the necessary
USB support is already present in the driver.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:56 +03:00
Pandiyarajan Pitchaimuthu
307749406d ath6kl: Check for valid endpoint ID in ath6kl_tx_complete()
Endpoint ID is checked to make sure it is valid.

Signed-off-by: Pandiyarajan Pitchaimuthu <c_ppitch@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:55 +03:00
Pandiyarajan Pitchaimuthu
86aa7c1efc ath6kl: Array index out of bounds check
The variable assigned_ep can be assigned value of -1 and is never
checked if it equals -1. So the endpoint array can have -1  as the index
value and can be out of bounds.

The value of assigned_ep is checked for -1 and is ensured that the
endpoint array doesn't go out of bounds.

Signed-off-by: Pandiyarajan Pitchaimuthu <c_ppitch@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:55 +03:00
Pandiyarajan Pitchaimuthu
698bf867d0 ath6kl: Blocked client notification
When a station tries to connect to an AP and if the MAC of the
station is in the AP's block list, the station cannot connect to the
AP. This is notified to the userspace with event
NL80211_CMD_CONN_FAILED and attribute NL80211_ATTR_CONN_FAILED_REASON.
The reason sent will be NL80211_CONN_FAIL_BLOCKED_CLIENT.

Signed-off-by: Pandiyarajan Pitchaimuthu <c_ppitch@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:54 +03:00
Pandiyarajan Pitchaimuthu
07033ce2fb ath6kl: Max clients reached notification
When a station requests connection to an AP, that has already been
connected to the maximum number of stations it can support, an event
is sent to user space via NL80211_CMD_CONN_FAILED command and reason
attribute NL80211_ATTR_CONN_FAILED_REASON with
NL80211_CONN_FAIL_MAX_CLIENTS as reason.

Signed-off-by: Pandiyarajan Pitchaimuthu <c_ppitch@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:53 +03:00
Vasanthakumar Thiagarajan
baec5c6d0b ath6kl: Fix random rx data corruption
The skb->tail pointer of rx buffers is not adjusted
after skb->data pointer is aligned to 4-byte, this
causes random rx data corruption.

Signed-off-by: Jin Navy <nhjin@qca.qualcomm.com>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:51 +03:00
Raja Mani
363f149ce3 ath6kl: Check for valid endpoint ID values in ath6kl_control_tx()
It's safe to check endpoint id values before it get
really used. Found this on code review.

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:50 +03:00
Raja Mani
d54601b92f ath6kl: Check for valid rate table index
There are 28 items defined in rate table array 'wmi_rate_tbl'.
The rate table index (reply->rate_index) in ath6kl_wmi_bitrate_reply_rx()
func is not checked for the valid max limit index before accessing
rate table array. There may be some incidents to get memory crashes
without safe max check. Fix this.

Found this on code review.

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:50 +03:00
Raja Mani
43a06b346d ath6kl: Avoid null ptr dereference while printing reg domain pair
Return value of ath6kl_get_regpair() is stored in 'regpair' in
ath6kl_wmi_regdomain_event() func and it's directly accessed
in the debug prints without checking for NULL value. There are
situation to get NULL pointer as a return value from
ath6kl_get_regpair() func. Fix this.

Found this on code review.

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:50 +03:00
Vasanthakumar Thiagarajan
58109df67a ath6kl: Fix reconnection issue after recovery
Disallowing any wmi commands while re-initializing the
firmware results in connection failures after recovery
is done in open/WEP mode. To fix this, clear WMI_READY,
to make sure no wmi command is tried while fw is down.
Remove ATH6KL_STATE_RECOVERY state check in ath6kl_control_tx()
so that any configuration during fw init time will go through
using wmi commands.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:50 +03:00
Wei Yongjun
f08dbda25f ath6kl: use list_move_tail instead of list_del/list_add_tail
Using list_move_tail() instead of list_del() + list_add_tail().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:50 +03:00
Andi Kleen
527f657030 ath6kl: fix uninitialized variable in ath6kl_sdio_enable_scatter()
gcc 4.8 warns

/backup/lsrc/git/linux-lto-2.6/drivers/net/wireless/ath/ath6kl/sdio.c:
In function 'ath6kl_sdio_enable_scatter':
/backup/lsrc/git/linux-lto-2.6/drivers/net/wireless/ath/ath6kl/sdio.c:748:16:
warning: 'ret' may be used uninitialized in this function
[-Wmaybe-uninitialized]
  if (virt_scat || ret) {
                ^

The variable can indeed be uninitialized when the previous if branch is
skipped. I just set it to zero for now. I'm not fully sure the fix is
correct, maybe the || should be an && ?

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:50 +03:00
Vasanthakumar Thiagarajan
66ddcc3942 ath6kl: Make fw error recovery configurable
Add a modparam to configure recovery. Recovery
from firmware error is disabled by default to debug
the actual issue further. To recovery from error,
modprobe ath6kl_core recovery_enable=1.

Reported-by: Jin Navy <nhjin@qca.qualcomm.com>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:49 +03:00
Vasanthakumar Thiagarajan
a356170632 ath6kl: Add a bit to ath6kl_dev_state for recovery cleanup state
Add a bit in ath6kl_dev_state to maintian the run time state
of firmware recovery configuration. This would help to have
user configuration in fw_recovery which will be added in
a separate patch.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:49 +03:00
Vasanthakumar Thiagarajan
e451f947c5 ath6kl: Remove unnecessary recovery state check in ath6kl_recovery_hb_timer()
Checking for recovery state just before re-arming hb_timer is not
necessary, this should be done at the begining of the timer instead.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:49 +03:00
Vasanthakumar Thiagarajan
9d9188409a ath6kl: Fix bug in scheduling hb_timer
hb_timer should be scheduled only when hb_poll is non-zero.
But in ath6kl_recovery_work() the timer is scheduled based
on fw_recovery.enable instead which is wrong.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:49 +03:00
Vasanthakumar Thiagarajan
77565794eb ath6kl: Recover from "wmi ctrl ep is full" condition
In some error conditions, fw pauses HTC pipes which would
result in control endpoint full condition. When we hit this
case, most of the time the device will be unusable. Re-initialize
the target to recover from this situation.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:49 +03:00
Vasanthakumar Thiagarajan
9233299394 ath6kl: Add support to detect fw error through heart beat
This patch adds support to detect fw error condition by sending
periodic message (heart beat challenge) to firmware. Upon reception
of the message, fw would send a response event to driver. When
there are no reponses from fw for about 5 cmd driver would
trigger the recovery logic assuming that fw has gone into an
error state.

Capable fw will advertise this capability through
ATH6KL_FW_CAPABILITY_HEART_BEAT_POLL bit. This feature
is disabled by default, can be enabled through a modparam
(heart_beat_poll). This modparam also confiures the polling
interval in msecs.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:48 +03:00
Vasanthakumar Thiagarajan
84caf8005b ath6kl: Recover from fw crash
Re-initialize the target when fw crash is reported.
This would make the device functional again after
target crash. During the target re-initialization
it is made sure that target is not bugged with data/cmd
request, ar->state ATH6KL_STATE_RECOVERY is used
for this purpose.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:48 +03:00
Vasanthakumar Thiagarajan
ede615d2f0 ath6kl: Refactor ath6kl_init_hw_start() and ath6kl_init_hw_stop()
So that these functions will be used to re-initialize the fw
upon detecting fw error. This refactoring moves ar->state
setting out of core stop/start functionality.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:48 +03:00
Dengke Qiu
83685091ac ath6kl: fix link speed when using sgi
The MSB of rate index from FW is used for sgi. But the ath6kl_wmi_get_rate
doesn't handle it. The access to wmi_rate_tbl array may be out of range
if sgi is 1. This may cause the return value of ath6kl_wmi_get_rate()
function is incorrect link rate. We add sgi adjustment to avoid such case.

kvalo: change patch title

Signed-off-by: Dengke Qiu <dqiu@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:48 +03:00
Mohammed Shafi Shajakhan
3814264481 ath6kl: trivial cleanup on interface type selection
a minor cleanup in assigning the driver specific network type
based on interface type.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:48 +03:00
Thomas Pedersen
2c07cf4461 ath6kl: consolidate WoW pattern length
Since WOW_MASK_SIZE and WOW_PATTERN_SIZE have the same value, are
logically equivalent, and part of the WMI API so therefore unlikely to
change, consolidate these into WOW_PATTERN_SIZE.

Reported-by Kalle Valo <kvalo@qualcomm.com>
Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:47 +03:00
Thomas Pedersen
b1f47e3a96 ath6kl: rework scheduled scan
This patch reflects changes in the firmware scheduled scan
implementation to behave better in cases with multiple concurrent vifs.
Major changes:

	- scheduled scan filters and state are now programmed per-vif.
	- decouple scheduled scan from host sleep.

To maintain graceful failure with old firmwares, a new firmware
capability bit is introduced: ATH6KL_FW_CAPABILITY_SCHED_SCAN_V2.
ath6kl simply won't advertise scheduled scan to cfg80211 if the
SCHED_SCAN_V2 is not supported.

Since firmwares from here on out won't support the previous implicit API
for scheduled scan (set WoW filters and host sleep), bump the firmware
API to protect old drivers.

Unfortunately, due to firmware RAM constraints ath6kl still cannot
expect a scan complete event at the end of a scheduled scan results
cycle, so the sched_scan_timer is retained.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:46 +03:00
Marina Makienko
a3b3842c2e ath6kl: check usb_register() return value
ath6kl_usb_init() does not check usb_register() return value.
As a result it may incorrectly report success of driver initialization.

Found by Linux Driver Verification project (linuxtesting.org).

kvalo: fix commit title and make cosmetic changes to the code to follow
more the style used in the driver

Signed-off-by: Marina Makienko <makienko@ispras.ru>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:46 +03:00
Vasanthakumar Thiagarajan
8114f9b6d2 ath6kl: Fix potential memory leak in ath6kl_tx_complete()
We bail out from ath6kl_tx_complete() if any of the sanity
checks on skb and ath6kl_cookie fails. By doing this we
potentially leak few remaining buffers in packet_queue.
Make sure to proceed processing the remaining buffers
as well. This issue is found during code review.

Reported-by: Wang yufeng <yufengw@qca.qualcomm.com>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:45 +03:00
Vasanthakumar Thiagarajan
0616dc1f2b ath6kl: Fix potential skb double free in ath6kl_wmi_sync_point()
skb given to ath6kl_control_tx() is owned by ath6kl_control_tx().
Calling function should not free the skb for error cases.
This is found during code review.

kvalo: fix a checkpatch warning in ath6kl_wmi_cmd_send()

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:45 +03:00
Thomas Pedersen
f21243a822 ath6kl: reconfigure RSN capabilities when restarting AP
If the firmware decides to initiate a channel switch on an AP vif
running an RSN BSS, reconfigure the saved RSN IE capabilities as well.

Fixes a bug where the beacon and 4-way handshake would have a capability
mismatch after a channel switch, since the firmware apparently clears
these on an AP disconnect.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:42 +03:00
Thomas Pedersen
b5495e666d ath6kl: restart concurrent vifs on failed connect
When an ath6kl STA vif is issued a connect command, the firmware will
disconnect all other beaconing vifs in preparation for a potential
channel switch. The case where the connect fails is currently unhandled,
so if a connection attempt on a STA vif fails and any vifs were waiting
for a new channel, simply restart the concurrent vifs on their previous
channel.

Requires that we start tracking the last issued channel in ar->last_ch,
which is valid since ath6kl only supports 1 channel at a time.

Also clear the beaconing vif's want_ch_switch bit regardless of whether
channel switch succeeds, to stop recommitting the same failed profile.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:40 +03:00
Thomas Pedersen
fd4377b6ba ath6kl: configure wow filters per-vif
Only WoW filters for the first vif were being set, causing failures to
wake up on any concurrent connected vifs. Handle all per-vif suspend
and resume tasks.

Since cfg80211 issues user wow filters on a per-wiphy basis, set any
custom filters on all connected vifs.

Starting WoW in firmware and setting host sleep mode is still handled on
a global per-phy level. The first vif is always used for bookkeeping
regardless of whether it is connected or not.

WoW is cancelled if no connected vifs are found.

No firmware capability bits or API bump is needed for this patch, as
setting filters for vifs with index > 0 will simply overwrite the index
0 filters in the current implementation. While not correct, this is
identical to the existing behavior.

kvalo: fix a checkpatch warning in ath6kl_wow_resume()

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24 11:49:39 +03:00