Commit graph

349,476 commits

Author SHA1 Message Date
Joachim Eastwood
f8bded383e net/at91_ether: use macb access functions
Use macb read/write funtions and remove the old at91_ether ones.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:28 -04:00
Joachim Eastwood
bc3bbef690 net/at91_ether: use macb register definitions
Use register and bits definitions from the macb header. This makes it
possible to have one header file for this hardware.

Process was scripted and the resulting object file has the same checksum.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:28 -04:00
Joachim Eastwood
1fd3ca4e14 net/macb: add AT91RM9200 specific registers and bits to header
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:28 -04:00
Pavel Machek
cc0677979e ARM: OMAP2+: Nokia N9/N900/N950 -- mention product names
This adds product names (that most users know) to Kconfig and board
comments.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-19 09:58:29 -07:00
Jonas Bonn
a91a2bb1db openrisc: use generic sys_execve
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-10-19 18:33:01 +02:00
Jonas Bonn
cbf23cf1b9 openrisc: use generic kernel_thread/kernel_execve
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-10-19 18:32:36 +02:00
Jonas Bonn
287ad220cd openrisc: pass correct arg to schedule_tail
schedule_tail() requires that the 'prev' task be passed as an argument
to it.  This arg is set in _switch, just before 'returning' to one of
the ret_* functions where schedule_tail is invoked.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-10-19 18:32:36 +02:00
Geert Uytterhoeven
8a745ee13f m68k: Wire up kcmp
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
2012-10-19 17:49:37 +02:00
Rusty Russell
e2a666d52b kbuild: sign the modules at install time
Linus deleted the old code and put signing on the install command,
I fixed it to extract the keyid and signer-name within sign-file
and cleaned up that script now it always signs in-place.

Some enthusiast should convert sign-key to perl and pull
x509keyid into it.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-19 08:27:43 -07:00
Lars-Peter Clausen
7737fa6d1e iio: Don't compare boolean values to true/false
Fixes the following warnings from coccicheck:
	drivers/iio/inkern.c:81:6-14: WARNING: Comparison to bool
	drivers/iio/dac/ad5686.c:191:5-11: WARNING: Comparison to bool

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:26:24 +01:00
Lars-Peter Clausen
6c724cb0ad staging:iio:lpc32xx_adc: Use resource_size instead of opencoding it
Fixes the following error from coccicheck:
	drivers/staging/iio/adc/lpc32xx_adc.c:153:43-46: ERROR: Missing resource_size with res

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:25:31 +01:00
Lars-Peter Clausen
2e132e4692 staging:iio:adis16400: Fixup adis16336 temp channel attributes
The temperature channel has a calibbias attribute which it should not have, but
the offset attribute is missing.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:34 +01:00
Lars-Peter Clausen
760ebc0d2a staging:iio:adis16400: Report correct temperature scale and offset
Temperature scale and offset differ between the different devices supported by
this driver. Right now the driver always reports the temperature scale and
offset of the adis16400 regardless of which chip variant is used. This patch
adds two new attributes to the chip_info struct, one for the temperature scale
and one for the temperature offset.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:34 +01:00
Lars-Peter Clausen
1cf8c97f94 staging:iio: Fix adis16400 channel offsets and scales
Most of the channel offsets and scales in the adis16400 are incorrect:
    * Voltage scale is off by a factor of 1000
    * Temperature scale is off by a factor of 1000
	* Temperature offset is completely wrong
	* Some of the acceleration scales are either completely wrong or have the
	  wrong unit
	* Some of the angular velocity scale are either completely wrong or have
	  the wrong unit

This patch fixes these issues. For consistency it also converts scales which are
correct to use the IIO_G_TO_M_S_2 and IIO_DEGREE_TO_RAD macro. This makes it
much easier to compare it to the value given in the datasheet.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:33 +01:00
Lars-Peter Clausen
7e72a54c08 staging:iio: Fix adis16260 channel offsets and scales
Most of the channel offsets and scales in the adis16260 are incorrect:
	* Temperature scale is off by a factor of 1000
	* Voltage scale is off by a factor of 1000
	* Temperature offset is completely wrong

This patch fixes these issues. Also use the IIO_DEGREE_TO_RAD for the angle
velocity since this makes it much easier to compare it to the value given in the
datasheet.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:33 +01:00
Lars-Peter Clausen
acba41f81f staging:iio: Fix adis16240 channel offsets and scales
Most of the channel offsets and scales in the adis16240 are incorrect:
    * Temperature scale is of by a factor of 1000
    * Voltage scale is of by a factor of 1000
    * Temperature offset is completely wrong
	* Peak scale is completely wrong

This patch fixes these issues. Also use the IIO_G_TO_M_S_2 macro for the
acceleration scale since this makes it much easier to compare it to the value
given in the datasheet.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:32 +01:00
Lars-Peter Clausen
4524034056 staging:iio: Fix adis16220 channel offsets and scales
Most of the channel offsets and scales in the adis16220 are incorrect:
	* Temperature scale is off by a factor of 1000
	* Voltage scale is off by a factor of 1000
	* Acceleration seems to have a typo "187042" since it should be instead of
	  "1887042"
	* Temperature offset is completely wrong

This patch fixes these issues.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:32 +01:00
Lars-Peter Clausen
d5304b7712 staging:iio: Fix adis16209 channel offsets and scales
Most of the channel offsets and scales in the adis16209 are incorrect:
	* Temperature scale is of by a factor of 1000
	* Voltage scale is of by a factor of 1000
	* Temperature offset is completely wrong
	* Rotational position scale is missing

This patch fixes these issues. Also use the IIO_G_TO_M_S_2 macro for the
acceleration scale since this makes it much easier to compare it with the value
given in the datasheet.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:31 +01:00
Lars-Peter Clausen
9cc19b81d7 staging:iio: Fix adis16204 channel offsets and scales
Most of the channel offsets and scales in the adis16204 are incorrect:
	* Temperature scale is off by a factor of 1000
	* Voltage scale is off by a factor of 1000
	* Acceleration is scale is in g instead of m/(s**2)
	* Temperature offset is completely wrong

This patch fixes these issues.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:17 +01:00
Lars-Peter Clausen
6fae58f392 staging:iio: Don't compare boolean values with true/false
Fixes the following coccicheck warnings:
	drivers/staging/iio/accel/lis3l02dq_ring.c:240:5-10: WARNING: Comparison to bool
	drivers/staging/iio/iio_dummy_evgen.c:111:6-25: WARNING: Comparison to bool

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:19:45 +01:00
Peter Meerwald
cdf71c7f6d staging iio: consistent commas in adis16400 channel spec
probably not the most important patch in the world

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: manuel.stahl@iis.fraunhofer.de
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:19:07 +01:00
Arnd Bergmann
65cb587d70 staging/iio/lis3l02dq: fix building without irq_to_gpio
The driver has not been building for some time after the
irq_to_gpio function has been removed from the kernel.

The only board in the upstream kernel that provides
this device is the "Stargate 2", which is also maintained
by Jonathan Cameron. Rather than working around the problem
by adding new platform data for this driver, this patch
uses the of_gpio framework to get to the gpio number.

However, the stargate2 code does not (yet) use DT based
probing, so it is still broken, but at least building
allyesconfig works again.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:19:07 +01:00
Lars-Peter Clausen
48edf8eb53 staging:iio: Remove unused DRIVER_NAME defines
Some drivers define a DRIVER_NAME, but never use the define. This patch removes
defines.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:19:06 +01:00
Peter Meerwald
231a7c5f5f staging iio: use iio_trigger_generic_data_rdy_poll() in accel/adis16209,adis16240 driver
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:19:05 +01:00
Peter Meerwald
ace43fcefb iio: fix spelling of Accelerometer in Kconfig
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Srinivas pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:19:02 +01:00
Peter Meerwald
1217c48f51 iio: use iio_push_to_buffer() in at91 driver
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:18:57 +01:00
Peter Meerwald
e1562ef304 iio: remove useless irq_enabled variable in at91
irq_enabled is only set, but never read

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:18:54 +01:00
Peter Senna Tschudin
73327b4c80 drivers/staging/iio: Remove unnecessary semicolon
A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r1@
statement S;
position p,p1;
@@
S@p1;@p

@script:python r2@
p << r1.p;
p1 << r1.p1;
@@
if p[0].line != p1[0].line_end:
        cocci.include_match(False)
@@
position r1.p;
@@
-;@p
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:18:51 +01:00
Lars-Peter Clausen
10dda40fb6 staging:iio: Fix adis16203 channel offsets and scales
Most of the channel offsets and scales in the adis16203 are incorrect:
	* Temperature scale is off by a factor of 1000
	* Voltage scale is off by a factor of 1000
	* Temperature offset is completely wrong

This patch fixes these issues.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:13:15 +01:00
Lars-Peter Clausen
8735cf94af staging:iio: Fix adis16201 channel offsets and scales
Most of the channel offsets and scales in the adis16201 are incorrect:
	* Temperature scale is off by a factor of 1000
	* Voltage scale is off by a factor of 1000
	* Acceleration scale is in g instead of m/(s**2)
	* Temperature offset is completely wrong

This patch fixes these issues.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:13:06 +01:00
Lars-Peter Clausen
9dbf8ccde1 iio: Add some helper macros for unit conversion
Some datasheets use a different unit to specify the channel scale than what IIO
expects it to be. This patch adds two helper macros which allow to convert units
commonly used in datasheets to IIO units:

 * acceleration: g -> meter / second**2
 * angular velocity: degree (/ second) -> rad (/ second)

This makes it much more convenient to specify and also easier to verify a
channel's scale attribute.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:12:38 +01:00
H. Peter Anvin
4533d86270 Merge commit '5bc66170dc' into x86/urgent
From Borislav Petkov <bp@amd64.org>:

Below is a RAS fix which reverts the addition of a sysfs attribute
which we agreed is not needed, post-factum. And this should go in now
because that sysfs attribute is going to end up in 3.7 otherwise and
thus exposed to userspace; removing it then would be a lot harder.

This is done as a merge rather than a simple patch/cherry-pick since
the baseline for this patch was not in the previous x86/urgent.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-10-19 07:55:09 -07:00
Fabio Estevam
4cc3c840cb ARM: mach-imx: Fix selection of ARCH_MXC
Since commit c5a0d497(ARM: imx: enable multi-platform build),
ARCH_MXC is selected by the following logic:

config ARCH_MXC
        def_bool y if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7

, which causes build error on vexpress_defconfig:

arch/arm/mach-imx/hotplug.c:49: undefined reference to `imx_enable_cpu'
arch/arm/mach-imx/platsmp.c:57: undefined reference to `imx_set_cpu_jump'
arch/arm/mach-imx/platsmp.c:58: undefined reference to `imx_enable_cpu'

Make ARCH_MXC a user selectable option, so that it does not get built
by default on other defconfigs that select ARCH_MULTI_V4_V5 or ARCH_MULTI_V6_V7.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-19 22:49:03 +08:00
Marco Porsch
d012a60510 mac80211: make client powersave independent of interface type
This patch prepares mac80211 for a later implementation of mesh or
ad-hoc powersave clients.
The structures related to powersave (buffer, TIM map, counters) are
moved from the AP-specific interface structure to a generic structure
that can be embedded into any interface type.
The functions related to powersave are prepared to allow easy
extension with different interface types. For example with:

+ } else if (sta->sdata->vif.type == NL80211_IFTYPE_MESH_POINT) {
+         ps = &sdata->u.mesh.ps;

Some references to the AP's beacon structure are removed where they
were obviously not used.

The patch compiles without warning and has been briefly tested as AP
interface with one client in PS mode.

Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-19 15:43:51 +02:00
Borislav Petkov
5bc66170dc x86, MCE: Remove bios_cmci_threshold sysfs attribute
450cc20103 ("x86/mce: Provide boot argument to honour bios-set CMCI
threshold") added the bios_cmci_threshold sysfs attribute which was
supposed to communicate to userspace tools that BIOS CMCI threshold has
been honoured.

However, this info is not of any importance to userspace - it should
rather get the actual error count it has been thresholded already from
MCi_STATUS[38:52].

So drop this before it becomes a used interface (good thing we caught
this early in 3.7-rc1, right after the merge window closed).

Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20121017105940.GA14590@x1.osrc.amd.com
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-19 15:22:29 +02:00
Alexander Duyck
6a05004a8a igb: Split igb_update_dca into separate Tx and Rx functions
This change makes it so that igb_update_dca is broken into two halves, one
for Rx and one for Tx.  The advantage to this is primarily readability.

In addition I am enabling relaxed ordering for reads from hardware since
this is supported on all of the igb parts.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19 04:42:13 -07:00
Alexander Duyck
0c2cc02e57 igb: Move the calls to set the Tx and Rx queues into igb_open
This change helps to address locking issues seen with
netif_set_real_num_tx_queues and netif_set_real_num_rx_queues when used in
the igb_set_interrupt_capability function.  To resolve these locking issues
I have moved the two function calls into __igb_open so that they can be
called while the RTNL lock is held.

An added advantage to this is that the number of queues is not updated
until the last possible moment so if there are any issues in allocating
MSI-X interrupts or resources for the rings we have time to change the
values prior to updating the netdev.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19 04:40:46 -07:00
Alexander Duyck
5536d2102a igb: Combine q_vector and ring allocation into a single function
This change combines the the allocation of q_vectors and rings into a single
function.  The advantage of this is that we are guaranteed we will avoid
overlap in the L1 cache sets.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19 04:39:35 -07:00
Alexander Duyck
de78d1f9c8 igb: Lock buffer size at 2K even on systems with larger pages
This change locks us in at 2K buffers even on a system that supports larger
frames.  The reason for this change is to make better use of pages and to
reduce the overall truesize of frames generated by igb.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19 04:34:35 -07:00
Alexander Duyck
2e334eee9b igb: Move rx_buffer related code in Rx cleanup path into separate function
In order to try and isolate things a bit further I am moving the code
related to retrieving data from the rx_buffer_info structure into a
separate function.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19 04:32:01 -07:00
Alexander Duyck
cbc8e55f6f igb: Map entire page and sync half instead of mapping and unmapping half pages
This change makes it so that we map the entire page and just sync half of
it for the device at a time.  The advantage to this approach is that we can
avoid the locking on map/unmap seen in many IOMMU implementations.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19 04:30:25 -07:00
Alexander Duyck
db2ee5bdf5 igb: Combine post-processing of skb into a single function
This change is meant to just clean-up a number of function calls that were
made at the end of the Rx clean-up path by combining them into a single
function call.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19 04:28:38 -07:00
Alexander Duyck
1a1c225b94 igb: Do not use header split, instead receive all frames into a single buffer
This change makes it so that we no longer use header split.  The idea is to
reduce partial cache line writes by hardware when handling frames larger
then header size.  We can compensate for the extra overhead of having to
memcpy the header buffer by avoiding the cache misses seen by leaving an
full skb allocated and sitting on the ring.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19 04:27:30 -07:00
Alexander Duyck
b534550a17 igb: Split Rx timestamping into two separate functions
In order to support page based receive we will need to split up the two
different types of timestamping into two separate functions.  The first one
will handle legacy timestamps with the value in the register, and the new
one will handle timestamps in the Rx buffer itself.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19 04:25:10 -07:00
Tushar Dave
ea5ceeabf5 igb: Correcting and improving small packet check and padding
Current implementation mess up the tail pointer. This patch sets skb->tail
correctly.
Also, the small packet check and padding is optimized by using unlikely and
calling skb_pad directly.

Signed-off-by: Tushar Dave <tushar.n.dave@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19 04:23:29 -07:00
Tony Prisk
67a0d4993d GPIO: vt8500: Add extended gpio bank for WM8505/WM8650
These SoC's have an extended bank of GPIO's seperate to the main
GPIO block. This patch adds the additional 5 GPIO's located in this
block which control I2C and PWMOUT.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-19 13:13:36 +02:00
Alexander Duyck
374c65d666 ixgbe: Add mailbox API version negotiation support to ixgbe PF
This change allows us to add a mailbox versioning API.  This will allow us
to determine the features supported by the VFs from the PF.  For example we
will be implementing a version 1.1 API for the VF that will indicate that
it can support us enabling Jumbo frames as the VF will support buffer
chaining.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Robert Garrett <RobertX.Garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19 04:08:18 -07:00
Alexander Duyck
58a02beedf ixgbe: Move message handling routines into their own functions
Instead of trying to maintain one large monolithic function that handles
most of the different messages from the VF it makes sense to break the
message handling function up so that we can just go through one switch
statement and call the correct routine for a given message.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19 04:06:15 -07:00
Alexander Duyck
872844ddb9 ixgbe: Enable jumbo frames support w/ SR-IOV
This change makes it so that we can have limited support for jumbo frames
when SR-IOV is enabled.  In order to accomplish this it is necessary to
disable all VFs when the PF has jumbo frames enabled.  If the VFs then
request the same maximum frame size as the PF they will be re-enabled.  A
follow on patch will add a means of identifying when a VF can support
spanning buffers and does not need to be worried about the actual supported
max frame size.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Tested-by: Robert Garrett <robertx.e.garrett@intel.com>
Tested-by: Sibai Li <Sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19 04:04:14 -07:00
Alexander Duyck
245f292d71 ixgbe: Initialize q_vector cpu and affinity masks correctly
When enabling DCB the rings belonging to a q_vector on CPU 0 were not
reinitializing their DCA registers.  Upon closer inspection the issue was
that the q_vector CPU variable was left at 0 resulting in the driver not
updating the DCA registers.

In order to guarantee the DCA registers will be updated I am adding a
couple line change so that we initialize the CPU variable to -1 which will
force a DCA update the first time an interrupt fires on that q_vector.

In addition we were setting the CPU affinity hint to all CPUs when we were
not specifying a CPU.  Instead we should leave it as all zeros to avoid any
possible confusion about the fact that we shouldn't be giving a hint.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19 03:52:02 -07:00