Commit graph

349,476 commits

Author SHA1 Message Date
Dave Chinner
6d8b79cfca xfs: rename xfs_sync.[ch] to xfs_icache.[ch]
xfs_sync.c now only contains inode reclaim functions and inode cache
iteration functions. It is not related to sync operations anymore.
Rename to xfs_icache.c to reflect it's contents and prepare for
consolidation with the other inode cache file that exists
(xfs_iget.c).

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 13:40:09 -05:00
Dave Chinner
c75921a72a xfs: xfs_quiesce_attr() should quiesce the log like unmount
xfs_quiesce_attr() is supposed to leave the log empty with an
unmount record written. Right now it does not wait for the AIL to be
emptied before writing the unmount record, not does it wait for
metadata IO completion, either. Fix it to use the same method and
code as xfs_log_unmount().

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 13:39:14 -05:00
Tony Lindgren
3a8761c027 ARM: OMAP: Split plat-omap/i2c.c into mach-omap1 and mach-omap2
There's no need to keep the device related things in the
common i2c.c as omap2+ is using hwmod. Split the code to
mach-omap1 and mach-omap2 parts and only leave common
code to plat-omap/i2c.c.

Note that as omap1 only has one i2c controller, we can
now remove the old device related macros.

Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17 11:36:50 -07:00
Tony Lindgren
8599e7c587 ARM: OMAP2+: Make board-zoom.h local
This can be local to mach-omap2.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17 11:36:46 -07:00
Tony Lindgren
54b693d467 ARM: OMAP1: Move plat/tc.h to mach/tc.h for omap1
We cannot keep this in plat as it causes problems
with the ARM single zImage support.

Cc: Felipe Balbi <balbi@ti.com>
Cc: linux-pcmcia@lists.infradead.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17 11:36:40 -07:00
Tony Lindgren
4c98dc6b8e ARM: OMAP: Make plat/fpga.h local to arch/arm/plat-omap
There's no need to have this file in plat/fpga.h. We can
make it local to plat-omap replacing fpga_read/write
functions directly with readb/writeb as that's how
they are already defined in fpga.h.

Note that 2420 based H4 is also using the fpga, so let's
keep the led support around in plat-omap until we flip
over mach-omap2 to device tree.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: Felipe Balbi <balbi@ti.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17 11:36:37 -07:00
Dave Chinner
c7eea6f7ad xfs: move xfs_quiesce_attr() into xfs_super.c
Both callers of xfs_quiesce_attr() are in xfs_super.c, and there's
nothing really sync-specific about this functionality so it doesn't
really matter where it lives. Move it to benext to it's callers, so
all the remount/sync_fs code is in the one place.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 13:30:20 -05:00
Daniel J Blueman
21c5e50e15 x86, amd, mce: Avoid NULL pointer reference on CPU northbridge lookup
When booting on a federated multi-server system (NumaScale), the
processor Northbridge lookup returns NULL; add guards to prevent this
causing an oops.

On those systems, the northbridge is accessed through MMIO and the
"normal" northbridge enumeration in amd_nb.c doesn't work since we're
generating the northbridge ID from the initial APIC ID and the last
is not unique on those systems. Long story short, we end up without
northbridge descriptors.

Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Cc: stable@vger.kernel.org # 3.6
Link: http://lkml.kernel.org/r/1349073725-14093-1-git-send-email-daniel@numascale-asia.com
[ Boris: beef up commit message ]
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-10-17 11:25:32 -07:00
Tony Lindgren
6832c95599 Merge branch 'omap-for-v3.8/cleanup-headers-dss' into omap-for-v3.8/cleanup-headers
Conflicts:
	arch/arm/mach-omap2/board-omap3logic.c
	arch/arm/mach-omap2/gpmc.c
	drivers/media/platform/omap/omap_vout.c
	drivers/media/platform/omap/omap_vout_vrfb.c
2012-10-17 11:21:34 -07:00
Greg Kroah-Hartman
2c78040c3e USB: usb.h: remove dbg() macro
There are no users of this macro anymore in the kernel tree, so finally
delete it.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17 11:16:13 -07:00
Tony Lindgren
46cddc01aa Merge branch 'omap-for-v3.8/cleanup-headers-mmc' into omap-for-v3.8/cleanup-headers
Conflicts:
	arch/arm/mach-omap1/devices.c
	arch/arm/mach-omap2/omap_hwmod_33xx_data.c
	arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
	drivers/mmc/host/omap.c
2012-10-17 11:13:42 -07:00
Tony Lindgren
99f0b8d6b0 Merge branch 'omap-for-v3.8/cleanup-headers-gpmc' into omap-for-v3.8/cleanup-headers
Conflicts:
	arch/arm/mach-omap2/board-3430sdp.c
	arch/arm/mach-omap2/board-h4.c
	arch/arm/mach-omap2/board-rx51-peripherals.c
	arch/arm/mach-omap2/board-rx51.c
	arch/arm/mach-omap2/pm34xx.c
	drivers/mtd/nand/omap2.c
	drivers/mtd/onenand/omap2.c
2012-10-17 11:07:18 -07:00
Jacob Shin
1bbbbe779a x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct mapping.
On systems with very large memory (1 TB in our case), BIOS may report a
reserved region or a hole in the E820 map, even above the 4 GB range. Exclude
these from the direct mapping.

[ hpa: this should be done not just for > 4 GB but for everything above the legacy
  region (1 MB), at the very least.  That, however, turns out to require significant
  restructuring.  That work is well underway, but is not suitable for rc/stable. ]

Cc: stable@kernel.org   # > 2.6.32
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Link: http://lkml.kernel.org/r/1319145326-13902-1-git-send-email-jacob.shin@amd.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-10-17 10:59:39 -07:00
Pritesh Raithatha
a03690e444 pinctrl: tegra: correct bank for pingroup and drv pingroup
Cc: stable@kernel.org
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-17 19:49:28 +02:00
Pritesh Raithatha
154f3ebf53 pinctrl: tegra: set low power mode bank width to 2
Cc: stable@kernel.org
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-17 19:47:06 +02:00
Pritesh Raithatha
d6ec6b60a5 dt: Document: correct tegra20/30 pinctrl slew-rate name
change nvidia,slew_rate* to nvidia,slew-rate*

Cc: stable@kernel.org
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-17 19:45:35 +02:00
Axel Lin
7cf8c9f781 gpio: mvebu: Add missing breaks in mvebu_gpio_irq_set_type
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:40:18 +00:00
Dave Chinner
34061f5c42 xfs: xfs_sync_fsdata is redundant
Why do we need to write the superblock to disk once we've written
all the data?  We don't actually - the reasons for doing this are
lost in the mists of time, and go back to the way Irix used to drive
VFS flushing.

On linux, this code is only called from two contexts: remount and
.sync_fs. In the remount case, the call is followed by a metadata
sync, which unpins and writes the superblock.  In the sync_fs case,
we only need to force the log to disk to ensure that the superblock
is correctly on disk, so we don't actually need to write it. Hence
the functionality is either redundant or superfluous and thus can be
removed.

Seeing as xfs_quiesce_data is essentially now just a log force,
remove it as well and fold the code back into the two callers.
Neither of them need the log covering check, either, as that is
redundant for the remount case, and unnecessary for the .sync_fs
case.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 12:28:47 -05:00
Sebastian Hesselbarth
a458926e16 ARM: dove: Add crypto engine to DT
Make use of DT support for the crypto engine on dove and remove
the obsolete init call.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:20:01 +00:00
Sebastian Hesselbarth
dfdc16fa78 ARM: dove: Remove watchdog from DT
The watchdog on dove requires an interrupt that is not yet
available on DT. Therefore, the watchdog DT node is removed
until the corresponding chained intc is available.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:19:58 +00:00
Sebastian Hesselbarth
138ee96048 ARM: dove: Restructure SoC device tree descriptor
This patch adds proper ranges for all mapped addresses within
dove SoC and moves the interrupt controller node inside the simple-bus
node.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:19:55 +00:00
Sebastian Hesselbarth
3fbcd3d0a0 ARM: dove: Fix clock names of sata and gbe
This patch fixes wrong clock names of lately added clock gates
for sata and gbe (mv64xx_eth).

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:19:52 +00:00
Sebastian Hesselbarth
fd57c65cbc ARM: dove: Fix tauros2 device tree init
During the review process of dove DT patches, Tauros2 cache
init call was changed and DT support added. This patch fixes
the call to Tauros2 init and adds a DT node. Moreover, plat/irq.h
include was missing from mach-dove/common.c.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:19:50 +00:00
Sebastian Hesselbarth
529b89ef7f ARM: dove: Add pcie clock support
As dove now has clock gating control ensure pcie ports grab their
clocks.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 17:19:47 +00:00
Dave Chinner
5889608df3 xfs: syncd workqueue is no more
With the syncd functions moved to the log and/or removed, the syncd
workqueue is the only remaining bit left. It is used by the log
covering/ail pushing work, as well as by the inode reclaim work.

Given how cheap workqueues are these days, give the log and inode
reclaim work their own work queues and kill the syncd work queue.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 12:19:27 -05:00
Paul Walmsley
3e6ece13d9 ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
Remove arch/arm/plat-omap/include/plat/sdrc.h by folding its contents
into arch/arm/mach-omap2/sdrc.h.  The objective is to assist Tony in
cleaning out arch/arm/plat-omap/, as his upstreams request.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
[tony@atomide.com: updated to remove rotate macros]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17 10:18:37 -07:00
Tony Lindgren
94c657853b Merge branch 'omap-for-v3.8/cleanup-headers-dma' into omap-for-v3.8/cleanup-headers
Conflicts:
	drivers/crypto/omap-aes.c
	drivers/crypto/omap-sham.c
	drivers/dma/omap-dma.c
2012-10-17 10:01:30 -07:00
Dave Chinner
9aa05000f2 xfs: xfs_sync_data is redundant.
We don't do any data writeback from XFS any more - the VFS is
completely responsible for that, including for freeze. We can
replace the remaining caller with a VFS level function that
achieves the same thing, but without conflicting with current
writeback work.

This means we can remove the flush_work and xfs_flush_inodes() - the
VFS functionality completely replaces the internal flush queue for
doing this writeback work in a separate context to avoid stack
overruns.

This does have one complication - it cannot be called with page
locks held.  Hence move the flushing of delalloc space when ENOSPC
occurs back up into xfs_file_aio_buffered_write when we don't hold
any locks that will stall writeback.

Unfortunately, writeback_inodes_sb_if_idle() is not sufficient to
trigger delalloc conversion fast enough to prevent spurious ENOSPC
whent here are hundreds of writers, thousands of small files and GBs
of free RAM.  Hence we need to use sync_sb_inodes() to block callers
while we wait for writeback like the previous xfs_flush_inodes
implementation did.

That means we have to hold the s_umount lock here, but because this
call can nest inside i_mutex (the parent directory in the create
case, held by the VFS), we have to use down_read_trylock() to avoid
potential deadlocks. In practice, this trylock will succeed on
almost every attempt as unmount/remount type operations are
exceedingly rare.

Note: we always need to pass a count of zero to
generic_file_buffered_write() as the previously written byte count.
We only do this by accident before this patch by the virtue of ret
always being zero when there are no errors. Make this explicit
rather than needing to specifically zero ret in the ENOSPC retry
case.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 12:01:25 -05:00
Dave Chinner
cf2931db2d xfs: Bring some sanity to log unmounting
When unmounting the filesystem, there are lots of operations that
need to be done in a specific order, and they are spread across
across a couple of functions. We have to drain the AIL before we
write the unmount record, and we have to shut down the background
log work before we do either of them.

But this is all split haphazardly across xfs_unmountfs() and
xfs_log_unmount(). Move all the AIL flushing and log manipulations
to xfs_log_unmount() so that the responisbilities of each function
is clear and the operations they perform obvious.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 11:57:10 -05:00
Arnaldo Carvalho de Melo
88a21d2f07 perf hists browser: Add back callchain folding symbol
The commit 5395a04841 ("perf hists: Separate overhead and baseline
columns") makes the "Overhead" column no more the first one, this
caused the test that checks if it is time to show if a histogram
entry has callchains never hits.

Fix it by checking if the 'i' variable is equal to PERF_HPP__OVERHEAD
instead of 0.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w3lcbx0fx1fnh3l2cbq40q2e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-17 13:54:08 -03:00
Dave Chinner
f661f1e0bf xfs: sync work is now only periodic log work
The only thing the periodic sync work does now is flush the AIL and
idle the log. These are really functions of the log code, so move
the work to xfs_log.c and rename it appropriately.

The only wart that this leaves behind is the xfssyncd_centisecs
sysctl, otherwise the xfssyncd is dead. Clean up any comments that
related to xfssyncd to reflect it's passing.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 11:53:29 -05:00
Tony Lindgren
1d81aea146 Merge remote-tracking branch 'tomi/3.8/vrfb-conversion' into omap-for-v3.8/cleanup-headers-dss 2012-10-17 09:51:57 -07:00
Dave Chinner
7f7bebefba xfs: don't run the sync work if the filesystem is read-only
If the filesystem is mounted or remounted read-only, stop the sync
worker that tries to flush or cover the log if the filesystem is
dirty. It's read-only, so it isn't dirty. Restart it on a remount,rw
as necessary. This avoids the need for RO checks in the work.

Similarly, stop the sync work when the filesystem is frozen, and
start it again when the filesysetm is thawed. This avoids the need
for special freeze checks in the work.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 11:48:29 -05:00
Al Viro
0cea479343 Merge branch 'execve' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 into no-rebases 2012-10-17 12:29:32 -04:00
Dave Chinner
7e18530bef xfs: rationalise xfs_mount_wq users
Instead of starting and stopping background work on the xfs_mount_wq
all at the same time, separate them to where they really are needed
to start and stop.

The xfs_sync_worker, only needs to be started after all the mount
processing has completed successfully, while it needs to be stopped
before the log is unmounted.

The xfs_reclaim_worker is started on demand, and can be
stopped before the unmount process does it's own inode reclaim pass.

The xfs_flush_inodes work is run on demand, and so we really only
need to ensure that it has stopped running before we start
processing an unmount, freeze or remount,ro.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 11:25:06 -05:00
Maxim Kachur
10f571d091 ALSA: emu10k1: add chip details for E-mu 1010 PCIe card
Add chip details for E-mu 1010 PCIe card. It has the same
chip as found in E-mu 1010b but it uses different PCI id.

Signed-off-by: Maxim Kachur <mcdebugger@duganet.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-17 18:18:10 +02:00
Dave Chinner
33c7a2bc48 xfs: xfs_syncd_stop must die
xfs_syncd_start and xfs_syncd_stop tie a bunch of unrelated
functionailty together that actually have different start and stop
requirements. Kill these functions and open code the start/stop
methods for each of the background functions.

Subsequent patches will move the start/stop functions around to the
correct places to avoid races and shutdown issues.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 11:14:19 -05:00
Jon Hunter
8119024ef7 ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memory
Currently, if the GPMC driver fails to reserve memory when probed we will
call BUG() and the kernel will not boot. Instead of calling BUG(), return
an error from probe and allow kernel to boot.

Boot tested on AM335x beagle bone board and OMAP4430 Panda board.

V2 changes:
- Ensure that clock and memory resources are released on error.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17 09:01:14 -07:00
Tero Kristo
64e29fd5ed ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable
Previously the code only acquired spinlock after increasing / decreasing
the usecount value, which is wrong. This leaves a small window where
a task switch may occur between the check of the usecount and the actual
wakeup / sleep of the domain. Fixed by moving the spinlock locking before
the usecount access. Left the usecount as atomic_t if someone wants an
easy access to the parameter through atomic_read.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17 09:00:31 -07:00
Stefan Achatz
5277e97c24 HID: roccat: allow readout of koneplus sensor register data
tcu sysfs attr was used to only control calibration process so far. Direct
sensor register access possibility has been revealed. Allowing readout of tcu
permits usage of this feature.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-17 17:37:21 +02:00
Olof Johansson
69648ae885 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
From Simon Horman:
"Please consider the following fix for the KZM-A9-GT board for 3.7.
 They both resolve fallout from recent IOMEM() changes."

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7779: use __iomem pointers for MMIO
  ARM: shmobile: armadillo800eva: __io abuse cleanup
2012-10-17 08:08:22 -07:00
Ralf Baechle
a12265400c MIPS: JZ4740: Forward declare struct uart_port in header.
As suggested by Geert Uytterhoeven <geert@linux-m68k.org>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Lars-Peter Clausen <lars@metafoo.de>
2012-10-17 17:00:50 +02:00
Antony Pavlov
a40b012f76 MIPS: JZ4740: Fix '#include guard' in serial.h
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Lars-Peter Clausen <lars@metafoo.de>
Patchwork: https://patchwork.linux-mips.org/patch/4424/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-17 16:58:51 +02:00
David Miller
7762608184 perf tools: Fix build on sparc.
More UAPI stuff.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20121017.010656.383828471689899431.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-17 11:45:58 -03:00
Arnaldo Carvalho de Melo
f8de2885eb perf python: Link with libtraceevent
The evsel methods to read tracepoint fields uses libtraceevent
functions, becoming needed by the python binding as well.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j3o4v7jyvp9ke9n230l96a1m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-17 11:45:46 -03:00
Arnaldo Carvalho de Melo
356712f6e2 perf python: Initialize 'page_size' variable
The commit 0c1fe6b:

 'perf tools: Have the page size value available for all tools'

Broke the python binding because the global variable 'page_size' is
initialized on the main() routine, that is not called when using
just the python binding, causing evlist.mmap() to fail because it
expects that variable to be initialized to the system's page size.

Fix it by initializing it on the binding init routine.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vrvp3azmbfzexnpmkhmvtzzc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-17 11:45:38 -03:00
Xiao Guangrong
bd6360cc0a KVM: MMU: introduce FNAME(prefetch_gpte)
The only difference between FNAME(update_pte) and FNAME(pte_prefetch)
is that the former is allowed to prefetch gfn from dirty logged slot,
so introduce a common function to prefetch spte

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-10-17 16:39:19 +02:00
Xiao Guangrong
a052b42b0e KVM: MMU: move prefetch_invalid_gpte out of pagaing_tmp.h
The function does not depend on guest mmu mode, move it out from
paging_tmpl.h

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-10-17 16:39:18 +02:00
Xiao Guangrong
d4878f24e3 KVM: MMU: cleanup FNAME(page_fault)
Let it return emulate state instead of spte like __direct_map

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-10-17 16:39:16 +02:00
Xiao Guangrong
bd660776da KVM: MMU: remove mmu_is_invalid
Remove mmu_is_invalid and use is_invalid_pfn instead

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-10-17 16:39:15 +02:00