Commit graph

349,476 commits

Author SHA1 Message Date
Al Viro
5e7d733391 c6x: switch to saner kernel_execve() semantics
ACKed-by: Mark Salter <msalter@redhat.com>
Tested-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-15 12:51:17 -04:00
Frederic Weisbecker
94a5714020 tick: Conditionally build nohz specific code in tick handler
This optimize a bit the high res tick sched handler.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
2012-10-15 18:51:08 +02:00
Frederic Weisbecker
9e8f559b08 tick: Consolidate tick handling for high and low res handlers
Besides unifying code, this also adds the idle check before
processing idle accounting specifics on the low res handler.
This way we also generalize this part of the nohz code for
!CONFIG_HIGH_RES_TIMERS to prepare for the adaptive tickless
features.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
2012-10-15 18:42:25 +02:00
Frederic Weisbecker
5bb962269c tick: Consolidate timekeeping handling code
Unify the duplicated timekeeping handling code of low and high res tick
sched handlers.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
2012-10-15 18:35:11 +02:00
Laurent Pinchart
8282da4789 MAINTAINERS: Add maintainer entry for the USB webcam gadget
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-15 09:28:23 -07:00
Laurent Pinchart
0b2ffb78c0 usb: gadget: Make webcam gadget select USB_LIBCOMPOSITE
Composite gadget support is now available as a library instead of being
built with each gadget. Composite drivers need to select
USB_LIBCOMPOSITE.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-15 09:26:26 -07:00
Stanislaw Gruszka
6863255bd0 cfg80211/mac80211: avoid state mishmash on deauth
Avoid situation when we are on associate state in mac80211 and
on disassociate state in cfg80211. This can results on crash
during modules unload (like showed on this thread:
http://marc.info/?t=134373976300001&r=1&w=2) and possibly other
problems.

Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-15 17:21:34 +02:00
Johannes Berg
df9b42963f Merge remote-tracking branch 'wireless/master' into mac80211 2012-10-15 17:20:54 +02:00
Al Viro
5fd0b580a9 avr32: switch to generic sys_execve()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-15 11:15:04 -04:00
Al Viro
5adc807f70 avr32: switch to generic kernel_thread()/kernel_execve()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-15 11:14:38 -04:00
Randy Dunlap
29bb4cc5e0 docbook: networking: fix file paths for uapi headers
Update file paths in Documentation/DocBook/networking.tmpl for uapi headers.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-15 08:04:41 -07:00
Ralf Baechle
325adeb55e mm: huge_memory: Fix build error.
Certain configurations won't implicitly pull in <linux/pagemap.h> resulting
in the following build error:

  mm/huge_memory.c: In function 'release_pte_page':
  mm/huge_memory.c:1697:2: error: implicit declaration of function 'unlock_page' [-Werror=implicit-function-declaration]
  mm/huge_memory.c: In function '__collapse_huge_page_isolate':
  mm/huge_memory.c:1757:3: error: implicit declaration of function 'trylock_page' [-Werror=implicit-function-declaration]
  cc1: some warnings being treated as errors

Reported-by: David Daney <david.daney@cavium.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-15 07:59:15 -07:00
Russell King
68687c842c ARM: fix oops on initial entry to userspace with Thumb2 kernels
Daniel Mack reports an oops at boot with the latest kernels:

  Internal error: Oops - undefined instruction: 0 [#1] SMP THUMB2
  Modules linked in:
  CPU: 0    Not tainted  (3.6.0-11057-g584df1d #145)
  PC is at cpsw_probe+0x45a/0x9ac
  LR is at trace_hardirqs_on_caller+0x8f/0xfc
  pc : [<c03493de>]    lr : [<c005e81f>]    psr: 60000113
  sp : cf055fb0  ip : 00000000  fp : 00000000
  r10: 00000000  r9 : 00000000  r8 : 00000000
  r7 : 00000000  r6 : 00000000  r5 : c0344555  r4 : 00000000
  r3 : cf057a40  r2 : 00000000  r1 : 00000001  r0 : 00000000
  Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM Segment user
  Control: 50c5387d  Table: 8f3f4019  DAC: 00000015
  Process init (pid: 1, stack limit = 0xcf054240)
  Stack: (0xcf055fb0 to 0xcf056000)
  5fa0:                                     00000001 00000000 00000000 00000000
  5fc0: cf055fb0 c000d1a8 00000000 00000000 00000000 00000000 00000000 00000000
  5fe0: 00000000 be9b3f10 00000000 b6f6add0 00000010 00000000 aaaabfaf a8babbaa

The analysis of this is as follows.  In init/main.c, we issue:

	kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND);

This creates a new thread, which falls through to the ret_from_fork
assembly, with r4 set NULL and r5 set to kernel_init.  You can see
this in your oops dump register set - r5 is 0xc0344555, which is the
address of kernel_init plus 1 which marks the function as Thumb code.

Now, let's look at this code a little closer - this is what the
disassembly looks like:

  c000d180 <ret_from_fork>:
  c000d180:       f03a fe08       bl      c0047d94 <schedule_tail>
  c000d184:       2d00            cmp     r5, #0
  c000d186:       bf1e            ittt    ne
  c000d188:       4620            movne   r0, r4
  c000d18a:       46fe            movne   lr, pc <-- XXXXXXX
  c000d18c:       46af            movne   pc, r5
  c000d18e:       46e9            mov     r9, sp
  c000d190:       ea4f 3959       mov.w   r9, r9, lsr #13
  c000d194:       ea4f 3949       mov.w   r9, r9, lsl #13
  c000d198:       e7c8            b.n     c000d12c <ret_to_user>
  c000d19a:       bf00            nop
  c000d19c:       f3af 8000       nop.w

This code was introduced in 9fff2fa0db (arm: switch to saner
kernel_execve() semantics).  I have marked one instruction, and it's
the significant one - I'll come back to that later.

Eventually, having had a successful call to kernel_execve(), kernel_init()
returns zero.

In returning, it uses the value in 'lr' which was set by the instruction
I marked above.  Unfortunately, this causes lr to contain 0xc000d18e -
an even address.  This switches the ISA to ARM on return but with a non
word aligned PC value.

So, what do we end up executing?  Well, not the instructions above - yes
the opcodes, but they don't mean the same thing in ARM mode.  In ARM mode,
it looks like this instead:

  c000d18c:       46e946af        strbtmi r4, [r9], pc, lsr #13
  c000d190:       3959ea4f        ldmdbcc r9, {r0, r1, r2, r3, r6, r9, fp, sp, lr, pc}^
  c000d194:       3949ea4f        stmdbcc r9, {r0, r1, r2, r3, r6, r9, fp, sp, lr, pc}^
  c000d198:       bf00e7c8        svclt   0x0000e7c8
  c000d19c:       8000f3af        andhi   pc, r0, pc, lsr #7
  c000d1a0:       e88db092        stm     sp, {r1, r4, r7, ip, sp, pc}
  c000d1a4:       46e81fff                        ; <UNDEFINED> instruction: 0x46e81fff
  c000d1a8:       8a00f3ef        bhi     0xc004a16c
  c000d1ac:       0a0cf08a        beq     0xc03493dc

I have included more above, because it's relevant.  The PSR flags which
we can see in the oops dump are nZCv, so Z and C are set.

All the above ARM instructions are not executed, except for two.
c000d1a0, which has no writeback, and writes below the current stack
pointer (and that data is lost when we take the next exception.) The
other instruction which is executed is c000d1ac, which takes us to...
0xc03493dc.  However, remember that bit 1 of the PC got set.  So that
makes the PC value 0xc03493de.

And that value is the value we find in the oops dump for PC.  What is
the instruction here when interpreted in ARM mode?

       0:       f71e150c                ; <UNDEFINED> instruction: 0xf71e150c

and there we have our undefined instruction (remember that the 'never'
condition code, 0xf, has been deprecated and is now always executed as
it is now being used for additional instructions.)

This path also nicely explains the state of the stack we see in the oops
dump too.

The above is a consistent and sane story for how we got to the oops
dump, which all stems from the instruction at 0xc000d18a being wrong.

Reported-by: Daniel Mack <zonque@gmail.com>
Tested-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-15 07:57:34 -07:00
Trond Myklebust
1813badd98 NFSv4.1: Use kcalloc() to allocate zeroed arrays instead of kzalloc()
Don't circumvent the array size checks.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-15 10:49:43 -04:00
Trond Myklebust
d527e5c15d NFSv4.1: Do not call pnfs_return_layout() from an rpciod context
Move the call to pnfs_return_layout() to the read and write rpc_release()
callbacks, so that it gets called from nfsiod, which is a more appropriate
context.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-15 10:49:43 -04:00
Trond Myklebust
8fcdc31b3d NFSv4.1: Kill nfs4_ds_disconnect()
There is nothing to prevent another thread from dereferencing ds->ds_clp
during or after the call to nfs4_ds_disconnect(), and Oopsing due to the
resulting NULL pointer.

Instead, we should just rely on filelayout_mark_devid_invalid() to keep
us out of trouble by avoiding that deviceid.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-15 10:49:42 -04:00
Salman Qazi
ba1ee07090 crypto: vmac - Make VMAC work when blocks aren't aligned
VMAC implementation, as it is, does not work with blocks that
are not multiples of 128-bytes.  Furthermore, this is a problem
when using the implementation on scatterlists, even
when the complete plain text is 128-byte multiple, as the pieces
that get passed to vmac_update can be pretty much any size.

I also added test cases for unaligned blocks.

Signed-off-by: Salman Qazi <sqazi@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-10-15 22:33:20 +08:00
Wei Yongjun
7291a932c6 crypto: talitos - convert to use be16_add_cpu()
Convert cpu_to_be16(be16_to_cpu(E1) + E2) to use be16_add_cpu().

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-10-15 22:18:26 +08:00
Tim Chen
e3899e4df0 crypto: tcrypt - Added speed test in tcrypt for crc32c
This patch adds a test case in tcrypt to perform speed test for
crc32c checksum calculation.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-10-15 22:18:25 +08:00
Tim Chen
6a8ce1ef39 crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction
This patch adds the crc_pcl function that calculates CRC32C checksum using the
PCLMULQDQ instruction on processors that support this feature. This will
provide speedup over using CRC32 instruction only.
The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and
kernel_fpu_end and incur some overhead.  So the new crc_pcl function is only
invoked for buffer size of 512 bytes or more.  Larger sized
buffers will expect to see greater speedup.  This feature is best used coupled
with eager_fpu which reduces the kernel_fpu_begin/end overhead.  For
buffer size of 1K the speedup is around 1.6x and for buffer size greater than
4K, the speedup is around 3x compared to original implementation in crc32c-intel
module. Test was performed on Sandy Bridge based platform with constant frequency
set for cpu.

A white paper detailing the algorithm can be found here:
http://download.intel.com/design/intarch/papers/323405.pdf

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-10-15 22:18:24 +08:00
Tim Chen
35b80920d4 crypto: crc32c - Rename crc32c-intel.c to crc32c-intel_glue.c
This patch renames the crc32c-intel.c file to crc32c-intel_glue.c file
in preparation for linking with the new crc32c-pcl-intel-asm.S file,
which contains optimized crc32c calculation based on PCLMULQDQ
instruction.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-10-15 22:18:22 +08:00
Vivek Gautam
01b8daf71b usb: dwc3: shutdown usb_phy when removing the device
We call usb_phy_init() from dwc3_core_init() during
probe, so adding usb_phy_shutdown() to dwc3_core_exit()
while removing the device so we don't keep PHYs
turned on, consuming power, unnecessarily.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 16:25:23 +03:00
Andrei Emeltchenko
56f6098441 Bluetooth: Zero bredr pointer when chan is deleted
If BREDR L2CAP chan is deleted and this chan is the channel through
which High Speed traffic is routed to AMP then zero pointer to
the chan in amp_mgr to prevent accessing it.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15 09:49:58 -03:00
Andrei Emeltchenko
79de886d9c Bluetooth: Send EFS Conf Rsp only for BR/EDR chan
Do not send EFS Configuration Response for High Speed channel yet.
It will be sent after receiving Logical Link Complete event.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15 09:47:44 -03:00
Andrei Emeltchenko
1d13a254e1 Bluetooth: AMP: Drop packets when no l2cap conn exist
High Speed hci_conn should always have l2cap_conn associated with it.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15 09:47:11 -03:00
Andrei Emeltchenko
d73a098804 Bluetooth: AMP: Handle complete frames in l2cap
Check flags type in switch statement and handle new frame
type ACL_COMPLETE used for High Speed data over AMP.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15 09:46:39 -03:00
Andrei Emeltchenko
204a6e5428 Bluetooth: AMP: Use Loglink handle in ACL Handle field
For AMP HCI controller use Logical Link handle in HCI ACL
Handle field.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15 09:45:52 -03:00
Gustavo Padovan
300229f962 Bluetooth: Rename __l2cap_connect() to l2cap_connect()
Use of "__" usually means we need to call the function with a lock held,
which is not the case here.

Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15 09:44:24 -03:00
Gustavo Padovan
2dc4e5105f Bluetooth: Add chan->ops->defer()
When DEFER_SETUP is set defer() will trigger an authorization
request to the userspace.

l2cap_chan_no_defer() is meant to be used when one does not want to
support DEFER_SETUP (A2MP for example).

Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15 09:43:29 -03:00
Gustavo Padovan
644912e18a Bluetooth: Move bt_accept_enqueue() to l2cap_sock.c
This is part of the move the parent socket usage to l2cap_sock.c

The change is safe when it comes to locking, bt_accept_enqueue() is still
protected by the parent socket lock inside the
l2cap_sock_new_connection_cb() code.

Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15 09:42:52 -03:00
Dan Carpenter
4400910508 oprofile, x86: Fix wrapping bug in op_x86_get_ctrl()
The "event" variable is a u16 so the shift will always wrap to zero
making the line a no-op.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org> v2.6.32..
Signed-off-by: Robert Richter <robert.richter@amd.com>
2012-10-15 14:38:24 +02:00
Srinivas Kandagatla
0e7090a626 usb: musb: ux500: use module_platform_driver macro
This patch removes some code duplication by using
module_platform_driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 15:29:55 +03:00
Srinivas Kandagatla
01380c081e usb: musb: tusb6010: use module_platform_driver macro
This patch removes some code duplication by using
module_platform_driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 15:29:51 +03:00
Srinivas Kandagatla
8d92f6d46c usb: musb: davinci: use module_platform_driver macro
This patch removes some code duplication by using
module_platform_driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 15:29:46 +03:00
Srinivas Kandagatla
0b07734d5e usb: musb: da8xx: use module_platform_driver macro
This patch removes some code duplication by using
module_platform_driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 15:29:42 +03:00
Srinivas Kandagatla
692373e128 usb: musb: blackfin: use module_platform_driver macro
This patch removes some code duplication by using
module_platform_driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 15:29:32 +03:00
Srinivas Kandagatla
a0a83eb407 usb: musb: am35x: use module_platform_driver macro
This patch removes some code duplication by using
module_platform_driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 15:29:23 +03:00
Stefano Babic
6ff1f3d3bd usb: musb: am35xx: drop spurious unplugging a device
On AM3517, tx and rx interrupt are detected together with
the disconnect event. This generates a kernel panic in musb_interrupt,
because rx / tx are handled after disconnect.
This issue was seen on a Technexion's TAM3517 SOM. Unplugging a device,
tx / rx interrupts together with disconnect are detected. This brings
to kernel panic like this:

[   68.526153] Unable to handle kernel NULL pointer dereference at virtual address 00000011
[   68.534698] pgd = c0004000
[   68.537536] [00000011] *pgd=00000000
[   68.541351] Internal error: Oops: 17 [#1] ARM
[   68.545928] Modules linked in:
[   68.549163] CPU: 0    Not tainted  (3.6.0-rc5-00020-g9e05905 #178)
[   68.555694] PC is at rxstate+0x8/0xdc
[   68.559539] LR is at musb_interrupt+0x98/0x858
[   68.564239] pc : [<c035cd88>]    lr : [<c035af1c>]    psr: 40000193
[   68.564239] sp : ce83fb40  ip : d0906410  fp : 00000000
[   68.576293] r10: 00000000  r9 : cf3b0e40  r8 : 00000002
[   68.581817] r7 : 00000019  r6 : 00000001  r5 : 00000001  r4 : 000000d4
[   68.588684] r3 : 00000000  r2 : 00000000  r1 : ffffffcc  r0 : cf23c108
[   68.595550] Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment ke

Note: this behavior is not seen with a USB hub, while it is
easy to reproduce connecting a USB-pen directly to the USB-A of
the board.

Drop tx / rx interrupts if disconnect is detected.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Felipe Balbi <balbi@ti.com>
Cc: stable@vger.kernel.org # 3.5 3.6
Tested-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Tested-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 15:20:27 +03:00
Felipe Balbi
041d81f493 usb: dwc3: gadget: fix 'endpoint always busy' bug
If a USB transfer has already been started, meaning
we have already issued StartTransfer command to that
particular endpoint, DWC3_EP_BUSY flag has also
already been set.

When we try to cancel this transfer which is already
in controller's cache, we will not receive XferComplete
event and we must clear DWC3_EP_BUSY in order to allow
subsequent requests to be properly started.

The best place to clear that flag is right after issuing
DWC3_DEPCMD_ENDTRANSFER.

Cc: stable@vger.kernel.org # v3.4 v3.5 v3.6
Reported-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 15:03:03 +03:00
Patrice Chotard
d036809d8b ARM: ux500: 8500: add IDLE pin configuration for SPI
This adds an idle state to the SPI pin control entry.

Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-15 13:59:50 +02:00
Patrice Chotard
9728df9565 ARM: ux500: 8500: register LCD VSI pinctrl table
This fixes up the pins used by the VSI interface to the HDMI
AV8100 encoder.

Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-15 13:59:50 +02:00
Felipe Balbi
3921426b13 usb: dwc3: core: move event buffer allocation out of dwc3_core_init()
This patch is in preparation for adding PM support
dwc3 driver. We want to re-use dwc3_core_init and
dwc3_core_exit() functions on resume() and suspend()
callbacks respectively.

Moving even buffer allocation away from dwc3_core_init()
will allow us to reuse the event buffer which was allocated
long ago on our probe() routine.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 14:58:56 +03:00
Felipe Balbi
380f0d2843 usb: dwc3: core: switch event buffer allocation to devm_kzalloc()
The rest of the driver is using devm_kzalloc() where possible
and this patch is just making event buffer allocation follow
the example.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 14:58:55 +03:00
Linus Walleij
4040d10a3d ARM: ux500: add DB serial number to entropy pool
This throws the DB (digital baseband, ASIC) serial number, process
type etc into the entropy pool by way of the device_add_randomness()
call. This should make every device have a unique pool state upon
boot.

Cc: Theodore Tso <tytso@mit.edu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-15 13:53:55 +02:00
Linus Walleij
a3a6c6a3a1 ARM: ux500: support the HREFP520 board variant
This adds support for another board registered for the old machine
type system. Mainly doing this because it is all that is required
to get that board working, everything else stays the same.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-15 13:53:55 +02:00
Elison Niven
939ccba437 netfilter: xt_nat: fix incorrect hooks for SNAT and DNAT targets
In (c7232c9 netfilter: add protocol independent NAT core), the
hooks were accidentally modified:

SNAT hooks are POST_ROUTING and LOCAL_IN (before it was LOCAL_OUT).
DNAT hooks are PRE_ROUTING and LOCAL_OUT (before it was LOCAL_IN).

Signed-off-by: Elison Niven <elison.niven@cyberoam.com>
Signed-off-by: Sanket Shah <sanket.shah@cyberoam.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-10-15 13:39:12 +02:00
Pablo Neira Ayuso
0153d5a810 netfilter: xt_CT: fix timeout setting with IPv6
This patch fixes ip6tables and the CT target if it is used to set
some custom conntrack timeout policy for IPv6.

Use xt_ct_find_proto which already handles the ip6tables case for us.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-10-15 13:38:58 +02:00
Afzal Mohammed
3ef5d0071c ARM: OMAP2+: gpmc: localize gpmc header
Requirement of gpmc header outside of mach-omap2 has been
cutoff, move gpmc header file in plat-omap folder to local
mach-omap2 folder

Objective - common zImage participation of omap

Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-10-15 14:42:15 +05:30
Afzal Mohammed
c46406a3f2 ARM: OMAP2+: gpmc: remove exported nand functions
nand driver handles gpmc-nand block fully, hence no more
users for these exported nand functions, remove it.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-10-15 14:42:13 +05:30
Afzal Mohammed
2ef9f3ddec mtd: nand: omap: handle gpmc bch[48]
gpmc-nand bch registers are now available in driver,
make use of it to handle bch[48] instead of relying
on gpmc exported functions.

And so nand driver no longer needs gpmc header, remove it.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-10-15 14:42:12 +05:30