Commit graph

349,476 commits

Author SHA1 Message Date
Hans Verkuil
32a7726031 [media] videobuf2-core: move plane verification out of __fill_v4l2/vb_buffer
The plane verification should be done before actually queuing or
dequeuing buffers, so move it out of __fill_v4l2_buffer and __fill_vb_buffer
and call it as a separate step.
This also makes it possible to change the return type of __fill_v4l2/vb_buffer
to void.
The dqbuf case took some special care: before removing a buffer from the
done_list you have to verify that the receiving v4l2_buffer has enough room
for all the planes. The number of planes can differ between buffers due to the
fact that buffers for other formats can be prepared using VIDIOC_PREPARE_BUF.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:21:40 -03:00
Lad, Prabhakar
626d533f8c [media] media: davinci: vpif: set device capabilities
set device_caps and also change the driver and
bus_info to proper values as per standard.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:14:40 -03:00
Lad, Prabhakar
b4a711e7bf [media] media: davinci: vpif: Add return code check at vb2_queue_init()
from commit with id 896f38f582
it's mandatory to check the return code of vb2_queue_init().

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:13:25 -03:00
Lad, Prabhakar
2bd4e58c9d [media] media: davinci: vpif: display: separate out subdev from output
vpif_display relied on a 1-1 mapping of output and subdev. This is not
necessarily the case. Separate the two. So there is a list of subdevs
and a list of outputs. Each output refers to a subdev and has routing
information. An output does not have to have a subdev.
The initial output for each channel is set to the fist output.
Currently missing is support for associating multiple subdevs with
an output.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:12:27 -03:00
Hans Verkuil
c389648a92 [media] tvp514x: s_routing should just change routing, not try to detect a signal
The s_routing function should not try to detect a signal. It is a really
bad idea to try to detect a valid video signal and return an error if
you can't. Changing input should do just that and nothing more.
Also don't power on the ADCs on s_routing, instead do that on querystd.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:10:38 -03:00
Hans Verkuil
0d4f35f3f0 [media] davinci: move struct vpif_interface to chan_cfg
struct vpif_interface is channel specific, not subdev specific.
Move it to the channel config.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:09:57 -03:00
Hans Verkuil
882084ad0f [media] vpif_display: use a v4l2_subdev pointer to call a subdev
This makes it easier to have outputs without subdevs.
This needs more work. The way the outputs are configured should be identical
to how inputs are configured.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:09:07 -03:00
Hans Verkuil
178cce1262 [media] vpif_capture: separate subdev from input
vpif_capture relied on a 1-1 mapping of input and subdev. This is not
necessarily the case. Separate the two. So there is a list of subdevs
and a list of inputs. Each input refers to a subdev and has routing
information. An input does not have to have a subdev.
The initial input for each channel is set to the fist input.
Currently missing is support for associating multiple subdevs with
an input.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:08:09 -03:00
Hans Verkuil
5be452c343 [media] vpif_capture: fix cleanup code
The cleanup sequence was incorrect and could cause a kernel oops.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:06:05 -03:00
Hans Verkuil
01b1d97559 [media] vpif_display: fix cleanup code
The cleanup sequence was incorrect and could cause a kernel oops.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:05:37 -03:00
Hans Verkuil
e6067f8b1e [media] vpif_display: first init subdevs, then register device nodes
When device nodes are registered they must be ready for use
immediately, so make sure the subdevs are loaded first.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:04:46 -03:00
Hans Verkuil
b65814e546 [media] vpif_capture: first init subdevs, then register device nodes
When device nodes are registered they must be ready for use
immediately, so make sure the subdevs are loaded first.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:03:12 -03:00
Hans Verkuil
7aaad13124 [media] vpif_capture: move routing info from subdev to input
Routing information is a property of the input, not of the subdev.
One subdev may provide multiple inputs, each with its own routing
information.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:02:34 -03:00
Hans Verkuil
33bf178660 [media] vpif_capture: remove unnecessary can_route flag
Calling a subdev op that isn't implemented will just return -ENOIOCTLCMD
No need to have a flag for that.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:02:10 -03:00
Hans Verkuil
311673ee9b [media] vpif_display: move output_id to channel_obj
The output index does not belong to video_obj, it belongs to
channel_obj. Also rename to output_idx to be consistent with
the input_idx name used in vpif_capture.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:01:11 -03:00
Hans Verkuil
6f47c6c69c [media] vpif_capture: move input_idx to channel_obj
input_idx does not belong to video_obj. Move it where it belongs.
Also remove the bogus code in the open() function that suddenly
changes the input to 0 for no reason.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:00:44 -03:00
Hans Verkuil
3cfee2daf9 [media] vpif_display: remove unused data structures
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 22:00:11 -03:00
Hans Verkuil
822f0fd362 [media] vpif_capture: remove unused data structure
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:59:45 -03:00
Manjunath Hadli
1e046d17b5 [media] ARM: davinci: da850 evm: Add EVM specific code for VPIF to work
Include the expander settings to select VPIF peripheral on
UI card and add registration call in EVM init. Also add platform
data to configure display and capture devices.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:59:16 -03:00
Manjunath Hadli
154d54a8ce [media] ARM: davinci: da850: Add SoC related definitions for VPIF
Add clock, pin mux definitions and registration function for
VPIF capture and display driver on DA850/OMAP-L138 SoC.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:58:35 -03:00
Lad, Prabhakar
f4ad8d74e1 [media] media: davinci: vpif: add check for NULL handler
for da850/omap-l138, there is no need to setup_input_channel_mode()
and set_clock(), to avoid adding dummy code in board file just returning
zero add a check in the driver itself to call the handler only if its
not NULL.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:56:22 -03:00
Hans Verkuil
99b32b2488 [media] fsl-viu: fix compiler warning
drivers/media/platform/fsl-viu.c: In function 'vidioc_s_fbuf':
drivers/media/platform/fsl-viu.c:867:32: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
This is fall-out from this commit:
commit e6eb28c220
Author: Hans Verkuil <hans.verkuil@cisco.com>
    [media] v4l2: make vidioc_s_fbuf const

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:53:10 -03:00
Lad, Prabhakar
b28d70176e [media] media: mt9p031/mt9t001/mt9v032: use V4L2_CID_TEST_PATTERN for test pattern control
V4L2_CID_TEST_PATTERN is now a standard control.
This patch replaces the user defined control for test
pattern to make use of standard control V4L2_CID_TEST_PATTERN.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:49:32 -03:00
Lad, Prabhakar
117a711a2c [media] media: v4l2-ctrl: add a helper function to add standard control with driver specific menu
Add helper function v4l2_ctrl_new_std_menu_items(), which adds
a standard menu control, with driver specific menu.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:48:03 -03:00
Lad, Prabhakar
5ebef0fbe0 [media] media: v4l2-ctrls: add control for test pattern
add V4L2_CID_TEST_PATTERN of type menu, which determines
the internal test pattern selected by the device.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:44:26 -03:00
Sylwester Nawrocki
ab7ef22419 [media] m5mols: Implement .get_frame_desc subdev callback
.get_frame_desc can be used by host interface driver to query
properties of captured frames, e.g. required memory buffer size.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:28:06 -03:00
Sylwester Nawrocki
14783d2536 [media] s5p-fimc: Add support for V4L2_PIX_FMT_S5C_UYVY_JPG fourcc
The V4L2_PIX_FMT_S5C_YUYV_JPG image formats consists of 2 planes, the
first containing interleaved JPEG/YUYV data and the second containing
meta data describing the interleaving method.
The image data is transferred with MIPI-CSI "User Defined Byte-Based
Data 1" type and is captured to memory by FIMC DMA engine.
The meta data is transferred using MIPI-CSI2 "Embedded 8-bit non Image
Data" and it is captured in the MIPI-CSI slave device and copied to
the bridge provided buffer.
To make sure the size of allocated buffers is correct for the subdevs
configuration when VIDIOC_STREAMON ioctl is invoked, an additional
check is added at the video pipeline validation function.
Flag FMT_FLAGS_COMPRESSED indicates the buffer size must be retrieved
from a sensor subdev.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:28:05 -03:00
Sylwester Nawrocki
36fa809276 [media] s5p-csis: Add support for non-image data packets capture
MIPI-CSI has internal memory mapped buffers for the frame embedded
(non-image) data. There are two buffers, for even and odd frames which
need to be saved after an interrupt is raised. The packet data buffers
size is 4 KiB and there is no status register in the hardware where the
actual non-image data size can be read from. Hence the driver copies
whole packet data buffer into a buffer provided by the FIMC driver.
This will form a separate plane in the user buffer.
When FIMC DMA engine is stopped by the driver due the to user space
not keeping up with buffer de-queuing the MIPI-CSIS will still run,
however it must discard data which is not captured by FIMC. Which
frames are actually capture by MIPI-CSIS is determined by means of
the s_tx_buffer subdev callback. When it is not called after a single
embedded data frame has been captured and copied and before next
embedded data frame interrupt occurrs, subsequent embedded data frames
will be dropped.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:28:04 -03:00
Sylwester Nawrocki
c3010097a7 [media] V4L: Add V4L2_PIX_FMT_S5C_UYVY_JPG fourcc definition
This patch adds definition of the Samsung S5C73M3 camera specific
image format. V4L2_PIX_FMT_S5C_UYVY_JPG is a two-planar format,
the  first plane contains interleaved UYVY and JPEG data followed
by meta-data. The second plane contains additional meta-data needed
for extracting JPEG and UYVY data stream from the first plane.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:28:03 -03:00
Sylwester Nawrocki
d2642485d6 [media] V4L: Add V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8 media bus format
This patch adds media bus pixel code for the interleaved JPEG/UYVY
image format used by S5C73MX Samsung cameras. This interleaved image
data is transferred on MIPI-CSI2 bus as User Defined Byte-based Data.
It also defines an experimental vendor and device specific media bus
formats section and adds related DocBook documentation.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:28:02 -03:00
Sylwester Nawrocki
2910311924 [media] V4L: Add [get/set]_frame_desc subdev callbacks
Add subdev callbacks for setting up parameters of the frame on media bus
that are not exposed to user space directly. This is just an initial,
mostly stub implementation. struct v4l2_mbus_frame_desc is intended
to be extended with sub-structures specific to a particular hardware media
bus. For now these new callbacks are used only to query or specify maximum
size of a compressed or hybrid (container) media bus frame in octets.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:28:01 -03:00
Sylwester Nawrocki
a375e1dfef [media] V4L: Add s_rx_buffer subdev video operation
The s_rx_buffer callback allows the host to set buffer for a data being
received by the subdev, e.g. non-image frame (meta) data. This callback
can be implemented by subdevice like a MIPI CSI2 receiver, allowing the
host driver to gather additional data into frame buffer passed to user
space.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:28:00 -03:00
Hans Verkuil
24c54f7757 [media] s5p-fimc: fix compiler warning
drivers/media/platform/s5p-fimc/fimc-m2m.c:561:2: warning: passing argument 2 of 'fimc_m2m_try_crop' discards 'const' qualifier from pointer target type [enabled by default]
drivers/media/platform/s5p-fimc/fimc-m2m.c:502:12: note: expected 'struct v4l2_crop *' but argument is of type 'const struct v4l2_crop *'
This is fall-out from this commit:
commit 4f996594ce
Author: Hans Verkuil <hans.verkuil@cisco.com>
    [media] v4l2: make vidioc_s_crop const

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:27:59 -03:00
Hans Verkuil
21ec9c97e4 [media] s5p-g2d: fix compiler warning
drivers/media/platform/s5p-g2d/g2d.c:535:2: warning: passing argument 3 of 'vidioc_try_crop' discards 'const' qualifier from pointer target type [enabled by default]
drivers/media/platform/s5p-g2d/g2d.c:510:12: note: expected 'struct v4l2_crop *' but argument is of type 'const struct v4l2_crop *'
This is fall-out from this commit:
commit 4f996594ce
Author: Hans Verkuil <hans.verkuil@cisco.com>
    [media] v4l2: make vidioc_s_crop const

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:27:58 -03:00
Thomas Abraham
2c4c03f381 [media] s5p-jpeg: use clk_prepare_enable and clk_disable_unprepare
Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare
calls as required by common clock framework.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:27:57 -03:00
Patrick Boettcher
1309b33683 [media] technisat-usb2: add a MODULE_DEVICE_TABLE for udev autoload
This patch adds a module-device-table-entry to the
technisat-usb2-driver which will help udev to on-demand load the
driver. This was obviously forgotten during initial commit.

Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05 21:26:26 -03:00
Trond Myklebust
19c54abab7 NFSv4.1: Cleanup ugliness in pnfs_layoutgets_blocked()
Split it into two functions, one which checks if layoutgets are blocked,
and one which checks if the layout stateid has expired.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-05 16:56:58 -07:00
Russell King
b4874a3d29 Merge branch 'fixes' into for-linus 2012-10-06 00:19:06 +01:00
Luck, Tony
385ddeac7e X86 ACPI: Use #ifdef not #if for CONFIG_X86 check
Fix a build warning on ia64:

include/linux/acpi.h:437:5: warning: "CONFIG_X86" is not defined

Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/506f59ae9600b36a4@agluck-desktop.sc.intel.com
Cc: Len Brown <lenb@kernel.org>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-10-05 15:59:07 -07:00
Julia Lawall
12ecd9570d arch/powerpc/kvm/e500_tlb.c: fix error return code
Convert a 0 error return code to a negative one, as returned elsewhere in the
function.

A new label is also added to avoid freeing things that are known to not yet
be allocated.

A simplified version of the semantic match that finds the first problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret;
expression e,e1,e2,e3,e4,x;
@@

(
if (\(ret != 0\|ret < 0\) || ...) { ... return ...; }
|
ret = 0
)
... when != ret = e1
*x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...);
... when != x = e2
    when != ret = e3
*if (x == NULL || ...)
{
  ... when != ret = e4
*  return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:55 +02:00
Paul Mackerras
55b665b026 KVM: PPC: Book3S HV: Provide a way for userspace to get/set per-vCPU areas
The PAPR paravirtualization interface lets guests register three
different types of per-vCPU buffer areas in its memory for communication
with the hypervisor.  These are called virtual processor areas (VPAs).
Currently the hypercalls to register and unregister VPAs are handled
by KVM in the kernel, and userspace has no way to know about or save
and restore these registrations across a migration.

This adds "register" codes for these three areas that userspace can
use with the KVM_GET/SET_ONE_REG ioctls to see what addresses have
been registered, and to register or unregister them.  This will be
needed for guest hibernation and migration, and is also needed so
that userspace can unregister them on reset (otherwise we corrupt
guest memory after reboot by writing to the VPAs registered by the
previous kernel).

The "register" for the VPA is a 64-bit value containing the address,
since the length of the VPA is fixed.  The "registers" for the SLB
shadow buffer and dispatch trace log (DTL) are 128 bits long,
consisting of the guest physical address in the high (first) 64 bits
and the length in the low 64 bits.

This also fixes a bug where we were calling init_vpa unconditionally,
leading to an oops when unregistering the VPA.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:55 +02:00
Paul Mackerras
a8bd19ef4d KVM: PPC: Book3S: Get/set guest FP regs using the GET/SET_ONE_REG interface
This enables userspace to get and set all the guest floating-point
state using the KVM_[GS]ET_ONE_REG ioctls.  The floating-point state
includes all of the traditional floating-point registers and the
FPSCR (floating point status/control register), all the VMX/Altivec
vector registers and the VSCR (vector status/control register), and
on POWER7, the vector-scalar registers (note that each FP register
is the high-order half of the corresponding VSR).

Most of these are implemented in common Book 3S code, except for VSX
on POWER7.  Because HV and PR differ in how they store the FP and VSX
registers on POWER7, the code for these cases is not common.  On POWER7,
the FP registers are the upper halves of the VSX registers vsr0 - vsr31.
PR KVM stores vsr0 - vsr31 in two halves, with the upper halves in the
arch.fpr[] array and the lower halves in the arch.vsr[] array, whereas
HV KVM on POWER7 stores the whole VSX register in arch.vsr[].

Signed-off-by: Paul Mackerras <paulus@samba.org>
[agraf: fix whitespace, vsx compilation]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:54 +02:00
Paul Mackerras
a136a8bdc0 KVM: PPC: Book3S: Get/set guest SPRs using the GET/SET_ONE_REG interface
This enables userspace to get and set various SPRs (special-purpose
registers) using the KVM_[GS]ET_ONE_REG ioctls.  With this, userspace
can get and set all the SPRs that are part of the guest state, either
through the KVM_[GS]ET_REGS ioctls, the KVM_[GS]ET_SREGS ioctls, or
the KVM_[GS]ET_ONE_REG ioctls.

The SPRs that are added here are:

- DABR:  Data address breakpoint register
- DSCR:  Data stream control register
- PURR:  Processor utilization of resources register
- SPURR: Scaled PURR
- DAR:   Data address register
- DSISR: Data storage interrupt status register
- AMR:   Authority mask register
- UAMOR: User authority mask override register
- MMCR0, MMCR1, MMCRA: Performance monitor unit control registers
- PMC1..PMC8: Performance monitor unit counter registers

In order to reduce code duplication between PR and HV KVM code, this
moves the kvm_vcpu_ioctl_[gs]et_one_reg functions into book3s.c and
centralizes the copying between user and kernel space there.  The
registers that are handled differently between PR and HV, and those
that exist only in one flavor, are handled in kvmppc_[gs]et_one_reg()
functions that are specific to each flavor.

Signed-off-by: Paul Mackerras <paulus@samba.org>
[agraf: minimal style fixes]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:54 +02:00
Scott Wood
5bd1cf1185 KVM: PPC: set IN_GUEST_MODE before checking requests
Avoid a race as described in the code comment.

Also remove a related smp_wmb() from booke's kvmppc_prepare_to_enter().
I can't see any reason for it, and the book3s_pr version doesn't have it.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:54 +02:00
Scott Wood
adbb48a854 KVM: PPC: e500: MMU API: fix leak of shared_tlb_pages
This was found by kmemleak.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:53 +02:00
Scott Wood
e400e72f25 KVM: PPC: e500: fix allocation size error on g2h_tlb1_map
We were only allocating half the bytes we need, which was made more
obvious by a recent fix to the memset in  clear_tlb1_bitmap().

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Cc: stable@vger.kernel.org
2012-10-05 23:38:53 +02:00
Paul Mackerras
70bddfefbd KVM: PPC: Book3S HV: Fix calculation of guest phys address for MMIO emulation
In the case where the host kernel is using a 64kB base page size and
the guest uses a 4k HPTE (hashed page table entry) to map an emulated
MMIO device, we were calculating the guest physical address wrongly.
We were calculating a gfn as the guest physical address shifted right
16 bits (PAGE_SHIFT) but then only adding back in 12 bits from the
effective address, since the HPTE had a 4k page size.  Thus the gpa
reported to userspace was missing 4 bits.

Instead, we now compute the guest physical address from the HPTE
without reference to the host page size, and then compute the gfn
by shifting the gpa right PAGE_SHIFT bits.

Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:53 +02:00
Paul Mackerras
964ee98ccd KVM: PPC: Book3S HV: Remove bogus update of physical thread IDs
When making a vcpu non-runnable we incorrectly changed the
thread IDs of all other threads on the core, just remove that
code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:52 +02:00
Paul Mackerras
a47d72f361 KVM: PPC: Book3S HV: Fix updates of vcpu->cpu
This removes the powerpc "generic" updates of vcpu->cpu in load and
put, and moves them to the various backends.

The reason is that "HV" KVM does its own sauce with that field
and the generic updates might corrupt it. The field contains the
CPU# of the -first- HW CPU of the core always for all the VCPU
threads of a core (the one that's online from a host Linux
perspective).

However, the preempt notifiers are going to be called on the
threads VCPUs when they are running (due to them sleeping on our
private waitqueue) causing unload to be called, potentially
clobbering the value.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:52 +02:00
Paul Mackerras
ed7a8d7a3c KVM: Move some PPC ioctl definitions to the correct place
This moves the definitions of KVM_CREATE_SPAPR_TCE and
KVM_ALLOCATE_RMA in include/linux/kvm.h from the section listing the
vcpu ioctls to the section listing VM ioctls, as these are both
implemented and documented as VM ioctls.

Fortunately there is no actual collision of ioctl numbers at this
point.  Moving these to the correct section will reduce the
probability of a future collision.  This does not change the
user/kernel ABI at all.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 23:38:52 +02:00