[ Upstream commit 132d0fd0b8 ]
For some controllers such as QCA2066, it does not need to send
HCI_Configure_Data_Path to configure non-HCI data transport path to support
HFP offload, their device drivers may set hdev->get_codec_config_data as
NULL, so Explicitly add this non NULL checking before calling the function.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06d6af4e12 ]
When the station is marked as no longer authorized, we shouldn't
transmit to it any longer, but in particular we shouldn't be able
to transmit to it after removing keys, which might lead to frames
being sent out unencrypted depending on the exact hardware offload
mechanism. Thus, instead of flushing only on station destruction,
which covers only some cases, always flush on unauthorization.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.d47f528829e7.I96903652c7ee0c5c66891f8b2364383da8e45a1f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05f136220d ]
As previously reported by Alexander, whose commit 69403bad97
("wifi: mac80211: sdata can be NULL during AMPDU start") I'm
reverting as part of this commit, there's a race between station
destruction and aggregation setup, where the aggregation setup
can happen while the station is being removed and queue the work
after ieee80211_sta_tear_down_BA_sessions() has already run in
__sta_info_destroy_part1(), and thus the worker will run with a
now freed station. In his case, this manifested in a NULL sdata
pointer, but really there's no guarantee whatsoever.
The real issue seems to be that it's possible at all to have a
situation where this occurs - we want to stop the BA sessions
when doing _part1, but we cannot be sure, and WLAN_STA_BLOCK_BA
isn't necessarily effective since we don't know that the setup
isn't concurrently running and already got past the check.
Simply call ieee80211_sta_tear_down_BA_sessions() again in the
second part of station destruction, since at that point really
nothing else can hold a reference to the station any more.
Also revert the sdata checks since those are just misleading at
this point.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1474bc87fe ]
This might seem pretty pointless rather than changing the locking
immediately, but it seems safer to run for a while with checks and
the old locking scheme, and then remove the wdev lock later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 730538edc8 ]
Lock the wiphy in the IP address notifier as another
place that should have it locked before calling into
the driver. This needs a bit of attention since the
notifier can be called while the wiphy is already
locked, when we remove an interface. Handle this by
not running the notifier in this case, and instead
calling out to the driver directly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69139d2919 ]
After a vsock socket has been added to a BPF sockmap, its prot->recvmsg
has been replaced with vsock_bpf_recvmsg(). Thus the following
recursiion could happen:
vsock_bpf_recvmsg()
-> __vsock_recvmsg()
-> vsock_connectible_recvmsg()
-> prot->recvmsg()
-> vsock_bpf_recvmsg() again
We need to fix it by calling the original ->recvmsg() without any BPF
sockmap logic in __vsock_recvmsg().
Fixes: 634f1a7110 ("vsock: support sockmap")
Reported-by: syzbot+bdb4bd87b5e22058e2a4@syzkaller.appspotmail.com
Tested-by: syzbot+bdb4bd87b5e22058e2a4@syzkaller.appspotmail.com
Cc: Bobby Eshleman <bobby.eshleman@bytedance.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240812022153.86512-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd662c4218 ]
Objects' dump callbacks are not concurrency-safe per-se with reset bit
set. If two CPUs perform a reset at the same time, at least counter and
quota objects suffer from value underrun.
Prevent this by introducing dedicated locking callbacks for nfnetlink
and the asynchronous dump handling to serialize access.
Fixes: 43da04a593 ("netfilter: nf_tables: atomic dump and reset for stateful objects")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a552339063 ]
Relieve the dump callback from having to inspect nlmsg_type upon each
call, just do it once at start of the dump.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: bd662c4218 ("netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a893b9cdf ]
No need to allocate it if one may just use struct netlink_callback's
scratch area for it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: bd662c4218 ("netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecf49cad80 ]
Name it for what it is supposed to become, a real nft_obj_dump_ctx. No
functional change intended.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: bd662c4218 ("netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff16111cc1 ]
The code does not make use of cb->args fields past the first one, no
need to zero them.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: bd662c4218 ("netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0b6648b04 ]
In theory, dumpreset may fail and invalidate the preceeding log message.
Fix this and use the occasion to prepare for object reset locking, which
benefits from a few unrelated changes:
* Add an early call to nfnetlink_unicast if not resetting which
effectively skips the audit logging but also unindents it.
* Extract the table's name from the netlink attribute (which is verified
via earlier table lookup) to not rely upon validity of the looked up
table pointer.
* Do not use local variable family, it will vanish.
Fixes: 8e6cf365e1 ("audit: log nftables configuration change events")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d8dc1c7be ]
Conntrack assumes an unconfirmed entry (not yet committed to global hash
table) has a refcount of 1 and is not visible to other cores.
With multicast forwarding this assumption breaks down because such
skbs get cloned after being picked up, i.e. ct->use refcount is > 1.
Likewise, bridge netfilter will clone broad/mutlicast frames and
all frames in case they need to be flood-forwarded during learning
phase.
For ip multicast forwarding or plain bridge flood-forward this will
"work" because packets don't leave softirq and are implicitly
serialized.
With nfqueue this no longer holds true, the packets get queued
and can be reinjected in arbitrary ways.
Disable this feature, I see no other solution.
After this patch, nfqueue cannot queue packets except the last
multicast/broadcast packet.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cd740b985 ]
Commit 264640fc2c ("ipv6: distinguish frag queues by device
for multicast and link-local packets") modified the ipv6 fragment
reassembly logic to distinguish frag queues by device for multicast
and link-local packets but in fact only the main reassembly code
limits the use of the device to those address types and the netfilter
reassembly code uses the device for all packets.
This means that if fragments of a packet arrive on different interfaces
then netfilter will fail to reassemble them and the fragments will be
expired without going any further through the filters.
Fixes: 648700f76b ("inet: frags: use rhashtables for reassembly units")
Signed-off-by: Tom Hughes <tom@compton.nu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2cbb16039 ]
This patch is based on the discussions between Neal Cardwell and
Eric Dumazet in the link
https://lore.kernel.org/netdev/20240726204105.1466841-1-quic_subashab@quicinc.com/
It was correctly pointed out that tp->window_clamp would not be
updated in cases where net.ipv4.tcp_moderate_rcvbuf=0 or if
(copied <= tp->rcvq_space.space). While it is expected for most
setups to leave the sysctl enabled, the latter condition may
not end up hitting depending on the TCP receive queue size and
the pattern of arriving data.
The updated check should be hit only on initial MSS update from
TCP_MIN_MSS to measured MSS value and subsequently if there was
an update to a larger value.
Fixes: 05f76b2d63 ("tcp: Adjust clamping window for applications specifying SO_RCVBUF")
Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 655111b838 ]
ssn_offset field is u32 and is placed into the netlink response with
nla_put_u32(), but only 2 bytes are reserved for the attribute payload
in subflow_get_info_size() (even though it makes no difference
in the end, as it is aligned up to 4 bytes). Supply the correct
argument to the relevant nla_total_size() call to make it less
confusing.
Fixes: 5147dfb508 ("mptcp: allow dumping subflow context to userspace")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240812065024.GA19719@asgard.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd89a81d85 ]
Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is
not known or does not have a GRO handler.
Such a packet is easily constructed. Syzbot generates them and sets
off this warning.
Remove the warning as it is expected and not actionable.
The warning was previously reduced from WARN_ON to WARN_ON_ONCE in
commit 270136613b ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad
proto callbacks").
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240614122552.1649044-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a97de7bff1 ]
syzbot reported rfcomm_sock_setsockopt_old() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt_old
net/bluetooth/rfcomm/sock.c:632 [inline]
BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt+0x893/0xa70
net/bluetooth/rfcomm/sock.c:673
Read of size 4 at addr ffff8880209a8bc3 by task syz-executor632/5064
Fixes: 9f2c8a03fb ("Bluetooth: Replace RFCOMM link mode with security level")
Fixes: bb23c0ab82 ("Bluetooth: Add support for deferring RFCOMM connection setup")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e45170d9a ]
In case of GSO, 'chunk->skb' pointer may point to an entry from
fraglist created in 'sctp_packet_gso_append()'. To avoid freeing
random fraglist entry (and so undefined behavior and/or memory
leak), introduce 'sctp_inq_chunk_free()' helper to ensure that
'chunk->skb' is set to 'chunk->head_skb' (i.e. fraglist head)
before calling 'sctp_chunk_free()', and use the aforementioned
helper in 'sctp_inq_pop()' as well.
Reported-by: syzbot+8bb053b5d63595ab47db@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=0d8351bbe54fd04a492c2daab0164138db008042
Fixes: 90017accff ("sctp: Add GSO support")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20240214082224.10168-1-dmantipov@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1acf1ac84 ]
Functions rds_still_queued and rds_clear_recv_queue lock a given socket
in order to safely iterate over the incoming rds messages. However
calling rds_inc_put while under this lock creates a potential deadlock.
rds_inc_put may eventually call rds_message_purge, which will lock
m_rs_lock. This is the incorrect locking order since m_rs_lock is
meant to be locked before the socket. To fix this, we move the message
item to a local list or variable that wont need rs_recv_lock protection.
Then we can safely call rds_inc_put on any item stored locally after
rs_recv_lock is released.
Fixes: bdbe6fbc6a ("RDS: recv.c")
Reported-by: syzbot+f9db6ff27b9bfdcfeca0@syzkaller.appspotmail.com
Reported-by: syzbot+dcd73ff9291e6d34b3ab@syzkaller.appspotmail.com
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://lore.kernel.org/r/20240209022854.200292-1-allison.henderson@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e316dd1cf1 ]
The top syzbot report for networking (#14 for the entire kernel)
is the queue timeout splat. We kept it around for a long time,
because in real life it provides pretty strong signal that
something is wrong with the driver or the device.
Removing it is also likely to break monitoring for those who
track it as a kernel warning.
Nevertheless, WARN()ings are best suited for catching kernel
programming bugs. If a Tx queue gets starved due to a pause
storm, priority configuration, or other weirdness - that's
obviously a problem, but not a problem we can fix at
the kernel level.
Bite the bullet and convert the WARN() to a print.
Before:
NETDEV WATCHDOG: eni1np1 (netdevsim): transmit queue 0 timed out 1975 ms
WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:525 dev_watchdog+0x39e/0x3b0
[... completely pointless stack trace of a timer follows ...]
Now:
netdevsim netdevsim1 eni1np1: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 1769 ms
Alternatively we could mark the drivers which syzbot has
learned to abuse as "print-instead-of-WARN" selectively.
Reported-by: syzbot+d55372214aff0faa1f1f@syzkaller.appspotmail.com
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74a7c93f45 ]
When using e.g. bonding, and doing a sequence such as
# iw wlan0 set type __ap
# ip link add name bond1 type bond
# ip link set wlan0 master bond1
# iw wlan0 interface del
we deadlock, since the wlan0 interface removal will cause
bonding to reset the MAC address of wlan0.
The locking would be somewhat difficult to fix, but since
this only happens during removal, we can simply ignore the
MAC address change at this time.
Reported-by: syzbot+25b3a0b24216651bc2af@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20231012123447.9f9d7fd1f237.Ic3a5ef4391b670941a69cec5592aefc79d9c2890@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a26787aa13 ]
We want to ensure everything holds the wiphy lock,
so also extend that to the MAC change callback.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 74a7c93f45 ("wifi: mac80211: fix change_address deadlock during unregister")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6532e257aa ]
This is inspired by several syzbot reports where
tcp_metrics_flush_all() was seen in the traces.
We can avoid acquiring tcp_metrics_lock for empty buckets,
and we should add one cond_resched() to break potential long loops.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 418b9687de ]
nfsd is the only thing using this helper, and it doesn't use the private
currently. When we switch to per-network namespace stats we will need
the struct net * in order to get to the nfsd_net. Use the net as the
proc private so we can utilize this when we make the switch over.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f094323867 ]
Since only one service actually reports the rpc stats there's not much
of a reason to have a pointer to it in the svc_program struct. Adjust
the svc_create_pooled function to take the sv_stats as an argument and
pass the struct through there as desired instead of getting it from the
svc_program->pg_stats.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: adjusted to apply to v6.6.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ab42f4d9a2 ]
We check for the existence of ->sv_stats elsewhere except in the core
processing code. It appears that only nfsd actual exports these values
anywhere, everybody else just has a write only copy of sv_stats in their
svc_program. Add a check for ->sv_stats before every adjustment to
allow us to eliminate the stats struct from all the users who don't
report the stats.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85df533a78 upstream.
Up to the 'Fixes' commit, having an endpoint with both the 'signal' and
'subflow' flags, resulted in the creation of a subflow and an address
announcement using the address linked to this endpoint. After this
commit, only the address announcement was done, ignoring the 'subflow'
flag.
That's because the same bitmap is used for the two flags. It is OK to
keep this single bitmap, the already selected local endpoint simply have
to be re-used, but not via select_local_address() not to look at the
just modified bitmap.
Note that it is unusual to set the two flags together: creating a new
subflow using a new local address will implicitly advertise it to the
other peer. So in theory, no need to advertise it explicitly as well.
Maybe there are use-cases -- the subflow might not reach the other peer
that way, we can ask the other peer to try initiating the new subflow
without delay -- or very likely the user is confused, and put both flags
"just to be sure at least the right one is set". Still, if it is
allowed, the kernel should do what has been asked: using this endpoint
to announce the address and to create a new subflow from it.
An alternative is to forbid the use of the two flags together, but
that's probably too late, there are maybe use-cases, and it was working
before. This patch will avoid people complaining subflows are not
created using the endpoint they added with the 'subflow' and 'signal'
flag.
Note that with the current patch, the subflow might not be created in
some corner cases, e.g. if the 'subflows' limit was reached when sending
the ADD_ADDR, but changed later on. It is probably not worth splitting
id_avail_bitmap per target ('signal', 'subflow'), which will add another
large field to the msk "just" to track (again) endpoints. Anyway,
currently when the limits are changed, the kernel doesn't check if new
subflows can be created or removed, because we would need to keep track
of the received ADD_ADDR, and more. It sounds OK to assume that the
limits should be properly configured before establishing new
connections.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-5-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd7c957f93 upstream.
It sounds better to avoid wasting cycles and / or put extreme memory
pressure on the system by trying to create new subflows if it was not
possible to add a new item in the announce list.
While at it, a warning is now printed if the entry was already in the
list as it should not happen with the in-kernel path-manager. With this
PM, mptcp_pm_alloc_anno_list() should only fail in case of memory
pressure.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-4-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c95eb32ced upstream.
That will simplify the following commits.
No functional changes intended.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-3-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: cd7c957f93 ("mptcp: pm: don't try to create sf if alloc failed")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 252442f2ae upstream.
By default, an address assigned to the output interface is selected when
the source address is not specified. This is problematic when a route,
configured in a vrf, uses an interface from another vrf (aka route leak).
The original vrf does not own the selected source address.
Let's add a check against the output interface and call the appropriate
function to select the source address.
CC: stable@vger.kernel.org
Fixes: 0d240e7811 ("net: vrf: Implement get_saddr for IPv6")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20240710081521.3809742-3-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cff3bd012a upstream.
nft_chain_validate already performs loop detection because a cycle will
result in a call stack overflow (ctx->level >= NFT_JUMP_STACK_SIZE).
It also follows maps via ->validate callback in nft_lookup, so there
appears no reason to iterate the maps again.
nf_tables_check_loops() and all its helper functions can be removed.
This improves ruleset load time significantly, from 23s down to 12s.
This also fixes a crash bug. Old loop detection code can result in
unbounded recursion:
BUG: TASK stack guard page was hit at ....
Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN
CPU: 4 PID: 1539 Comm: nft Not tainted 6.10.0-rc5+ #1
[..]
with a suitable ruleset during validation of register stores.
I can't see any actual reason to attempt to check for this from
nft_validate_register_store(), at this point the transaction is still in
progress, so we don't have a full picture of the rule graph.
For nf-next it might make sense to either remove it or make this depend
on table->validate_state in case we could catch an error earlier
(for improved error reporting to userspace).
Fixes: 20a69341f2 ("netfilter: nf_tables: add netlink set API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8af1f11865 upstream.
As mentioned in the 'Fixes' commit, the port flag is only supported by
the 'signal' flag, and not by the 'subflow' one. Then if both the
'signal' and 'subflow' flags are set, the problem is the same: the
feature cannot work with the 'subflow' flag.
Technically, if both the 'signal' and 'subflow' flags are set, it will
be possible to create the listening socket, but not to establish a
subflow using this source port. So better to explicitly deny it, not to
create some confusions because the expected behaviour is not possible.
Fixes: 09f12c3ab7 ("mptcp: allow to use port and non-signal in set_flags")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-2-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6834097fc3 upstream.
There was a support for signal endpoints, but only when the endpoint's
flag was changed during a connection. If an endpoint with the signal and
backup was already present, the MP_JOIN reply was not containing the
backup flag as expected.
That's confusing to have this inconsistent behaviour. On the other hand,
the infrastructure to set the backup flag in the SYN + ACK + MP_JOIN was
already there, it was just never set before. Now when requesting the
local ID from the path-manager, the backup status is also requested.
Note that when the userspace PM is used, the backup flag can be set if
the local address was already used before with a backup flag, e.g. if
the address was announced with the 'backup' flag, or a subflow was
created with the 'backup' flag.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/507
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ Conflicts in pm_userspace.c because the context has changed in commit
1e07938e29 ("net: mptcp: rename netlink handlers to
mptcp_pm_nl_<blah>_{doit,dumpit}") which is not in this version. This
commit is unrelated to this modification.
Conflicts in protocol.h because the context has changed in commit
9ae7846c4b ("mptcp: dump addrs in userspace pm list") which is not
in this version. This commit is unrelated to this modification. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d67c5649c1 upstream.
Before this patch, receiving an ADD_ADDR echo on the just connected
MP_JOIN subflow -- initiator side, after the MP_JOIN 3WHS -- was
resulting in an MP_RESET. That's because only ACKs with a DSS or
ADD_ADDRs without the echo bit were allowed.
Not allowing the ADD_ADDR echo after an MP_CAPABLE 3WHS makes sense, as
we are not supposed to send an ADD_ADDR before because it requires to be
in full established mode first. For the MP_JOIN 3WHS, that's different:
the ADD_ADDR can be sent on a previous subflow, and the ADD_ADDR echo
can be received on the recently created one. The other peer will already
be in fully established, so it is allowed to send that.
We can then relax the conditions here to accept the ADD_ADDR echo for
MPJ subflows.
Fixes: 67b12f792d ("mptcp: full fully established support after ADD_ADDR")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-1-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89add40066 upstream.
Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb
for GSO packets.
The function already checks that a checksum requested with
VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets
this might not hold for segs after segmentation.
Syzkaller demonstrated to reach this warning in skb_checksum_help
offset = skb_checksum_start_offset(skb);
ret = -EINVAL;
if (WARN_ON_ONCE(offset >= skb_headlen(skb)))
By injecting a TSO packet:
WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0
ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774
ip_finish_output_gso net/ipv4/ip_output.c:279 [inline]
__ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301
iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4850 [inline]
netdev_start_xmit include/linux/netdevice.h:4864 [inline]
xmit_one net/core/dev.c:3595 [inline]
dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611
__dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261
packet_snd net/packet/af_packet.c:3073 [inline]
The geometry of the bad input packet at tcp_gso_segment:
[ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0
[ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244
[ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0))
[ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536
ip_summed=3 complete_sw=0 valid=0 level=0)
Mitigate with stricter input validation.
csum_offset: for GSO packets, deduce the correct value from gso_type.
This is already done for USO. Extend it to TSO. Let UFO be:
udp[46]_ufo_fragment ignores these fields and always computes the
checksum in software.
csum_start: finding the real offset requires parsing to the transport
header. Do not add a parser, use existing segmentation parsing. Thanks
to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded.
Again test both TSO and USO. Do not test UFO for the above reason, and
do not test UDP tunnel offload.
GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be
CHECKSUM_NONE since commit 10154dbded ("udp: Allow GSO transmit
from devices with no checksum offload"), but then still these fields
are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no
need to test for ip_summed == CHECKSUM_PARTIAL first.
This revises an existing fix mentioned in the Fixes tag, which broke
small packets with GSO offload, as detected by kselftests.
Link: https://syzkaller.appspot.com/bug?extid=e1db31216c789f552871
Link: https://lore.kernel.org/netdev/20240723223109.2196886-1-kuba@kernel.org
Fixes: e269d79c7d ("net: missing check virtio")
Cc: stable@vger.kernel.org
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240729201108.1615114-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ed0172af5d ]
We've observed NFS clients with sync tasks sleeping in __rpc_execute
waiting on RPC_TASK_QUEUED that have not responded to a wake-up from
rpc_make_runnable(). I suspect this problem usually goes unnoticed,
because on a busy client the task will eventually be re-awoken by another
task completion or xprt event. However, if the state manager is draining
the slot table, a sync task missing a wake-up can result in a hung client.
We've been able to prove that the waker in rpc_make_runnable() successfully
calls wake_up_bit() (ie- there's no race to tk_runstate), but the
wake_up_bit() call fails to wake the waiter. I suspect the waker is
missing the load of the bit's wait_queue_head, so waitqueue_active() is
false. There are some very helpful comments about this problem above
wake_up_bit(), prepare_to_wait(), and waitqueue_active().
Fix this by inserting smp_mb__after_atomic() before the wake_up_bit(),
which pairs with prepare_to_wait() calling set_current_state().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7e5793035 ]
When a key is requested by userspace, there's really no need
to include the key data, the sequence counter is really what
userspace needs in this case. The fact that it's included is
just a historic quirk.
Remove the key data.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240627104411.b6a4f097e4ea.I7e6cc976cb9e8a80ef25a3351330f313373b4578@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ca27e0c8c ]
When a SOCK_(STREAM|SEQPACKET) socket connect()s to another one, we need
to lock the two sockets to check their states in unix_stream_connect().
We use unix_state_lock() for the server and unix_state_lock_nested() for
client with tricky sk->sk_state check to avoid deadlock.
The possible deadlock scenario are the following:
1) Self connect()
2) Simultaneous connect()
The former is simple, attempt to grab the same lock, and the latter is
AB-BA deadlock.
After the server's unix_state_lock(), we check the server socket's state,
and if it's not TCP_LISTEN, connect() fails with -EINVAL.
Then, we avoid the former deadlock by checking the client's state before
unix_state_lock_nested(). If its state is not TCP_LISTEN, we can make
sure that the client and the server are not identical based on the state.
Also, the latter deadlock can be avoided in the same way. Due to the
server sk->sk_state requirement, AB-BA deadlock could happen only with
TCP_LISTEN sockets. So, if the client's state is TCP_LISTEN, we can
give up the second lock to avoid the deadlock.
CPU 1 CPU 2 CPU 3
connect(A -> B) connect(B -> A) listen(A)
--- --- ---
unix_state_lock(B)
B->sk_state == TCP_LISTEN
READ_ONCE(A->sk_state) == TCP_CLOSE
^^^^^^^^^
ok, will lock A unix_state_lock(A)
.--------------' WRITE_ONCE(A->sk_state, TCP_LISTEN)
| unix_state_unlock(A)
|
| unix_state_lock(A)
| A->sk_sk_state == TCP_LISTEN
| READ_ONCE(B->sk_state) == TCP_LISTEN
v ^^^^^^^^^^
unix_state_lock_nested(A) Don't lock B !!
Currently, while checking the client's state, we also check if it's
TCP_ESTABLISHED, but this is unlikely and can be checked after we know
the state is not TCP_CLOSE.
Moreover, if it happens after the second lock, we now jump to the restart
label, but it's unlikely that the server is not found during the retry,
so the jump is mostly to revist the client state check.
Let's remove the retry logic and check the state against TCP_CLOSE first.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d27a835f41 ]
The number of fallback reasons defined in the smc_clc.h file has reached
36. For historical reasons, some are no longer quoted, and there's 33
actually in use. So, add the max value of fallback reason count to 36.
Fixes: 6ac1e6563f ("net/smc: support smc v2.x features validate")
Fixes: 7f0620b994 ("net/smc: support max connections per lgr negotiation")
Fixes: 69b888e3bb ("net/smc: support max links per lgr negotiation in clc handshake")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Link: https://patch.msgid.link/20240805043856.565677-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5431dc280 ]
This restores behaviour (including the comment) from now-removed
hci_request.c, and also matches existing code for active scanning.
Without this, the duplicates filter is always active when passive
scanning, which makes it impossible to work with devices that send
nontrivial dynamic data in their advertisement reports.
Fixes: abfeea476c ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY")
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
