We free "info" then dereference it on the next line. Really this whole
function would be better if we wrote it to unwind in the mirror of how
things are allocated in the probe.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Alexander Shiyan <shc_work@mail.ru>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Allow i2c-versatile to be enabled for ARM MPS platforms.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Several drivers call to_platform_device() to get platform_device
and pass it to platform_get_drvdata(). In platform_get_drvdata(),
the platform_device is converted back to struct device again.
Use dev_get_drvdata() to avoid platform_device/device dance.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> (for DesignWare only)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The kerneldoc comments for a couple of functions in drivers/ata/libata-eh.c
had fallen behind the current implementation, resulting in these doc build
warnings:
./drivers/ata/libata-eh.c:1449: warning: No description found for parameter 'link'
./drivers/ata/libata-eh.c:1449: warning: Excess function parameter 'ap' description in 'ata_eh_done'
./drivers/ata/libata-eh.c:1590: warning: No description found for parameter 'qc'
./drivers/ata/libata-eh.c:1590: warning: Excess function parameter 'dev' description in 'ata_eh_request_sense'
Update the comments and make the warnings go away.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
The speed of sending i2c master code in high-speed mode depends on
source clock, clock-div and TIMING register. The source clock and
clock-div of different SoC are not all the same. In order to send
i2c master code at 400k in high-speed mode, a appropriate value
should be set to TIMING register for a certain source clock and
clock-div.
Signed-off-by: Jun Gao <jun.gao@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
At least the Acer Iconia Tab8 / aka W1-810 uses 1MiHz instead of
1MHz for one of its busses, fix this up to 1MHz instead of failing
the probe of that bus.
This fixes the accelerometer on the Acer Iconia Tab8 not working.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
When we refuse to probe due to an invalid clock frequency, log
the frequency which is causing this error.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Up until recently sync_file were create to export a single dma-fence to
userspace, and so we could canabalise a bit insie dma-fence to mark
whether or not we had enable polling for the sync_file itself. However,
with the advent of syncobj, we do allow userspace to create multiple
sync_files for a single dma-fence. (Similarly, that the sw-sync
validation framework also started returning multiple sync-files wrapping
a single dma-fence for a syncpt also triggering the problem.)
This patch reverts my suggestion in commit e241655373
("dma-buf/sync_file: only enable fence signalling on poll()") to use a
single bit in the shared dma-fence and restores the sync_file->flags for
tracking the bits individually.
Reported-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Fixes: f1e8c67123 ("dma-buf/sw-sync: Use an rbtree to sort fences in the timeline")
Fixes: e9083420bb ("drm: introduce sync objects (v4)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: dri-devel@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170728212951.7818-1-chris@chris-wilson.co.uk
(cherry picked from commit db1fc97ca0)
The PH16 pin has a function with mux id 0x5, which is the DET pin of the
"sim" (smart card reader) IP block.
This function is missing in old versions of A10/A20 SoCs' datasheets and
user manuals, so it's also missing in the old drivers. The newest A10
Datasheet V1.70 and A20 Datasheet V1.41 contain this pin function, and
it's discovered during implementing R40 pinctrl driver.
Add it to the driver. As we now merged A20 pinctrl driver to the A10
one, we need to only fix the A10 driver now.
Fixes: f2821b1ca3 ("pinctrl: sunxi: Move Allwinner A10 pinctrl
driver to a driver of its own")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
For now empty ID table is not allowed with ACPI and prevents driver to
be probed.
Add a check to allow empty ID table.
This introduces a helper i2c_acpi_match_device().
Note, we rename some static function in i2c-core-acpi.c to distinguish
with public API.
Fixes: da10c06a04 ("i2c: Make I2C ID tables non-mandatory for DT'ed devices")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Rajmohan Mani <rajmohan.mani@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[wsa: needed to get some drivers probed again]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
According to pinctrl assignment for Pro4, each definition of USB#2 and
USB#3 are as follows.
184: USB2VBUS
185: USB2OD
186: USB2ID
187: USB3VBUS
188: USB3OD
USB#2 has an additional pin "USB2ID", but the chip doesn't use this pin
while in host-mode. Considering this pin, the pin definitions for USB#3
should be {187, 188}.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The value argument of lp87565_gpio_direction_output() means output level
rather than gpio direction.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following warnings when building docs:
../drivers/gpu/drm/drm_modes.c:1623: warning: No description found for parameter 'display'
../drivers/gpu/drm/drm_modes.c:1623: warning: Excess function parameter 'connector' description in 'drm_mode_is_420_only'
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170720174746.29100-2-seanpaul@chromium.org
Without a quirk or the X Window System, this device disconnects every
60 seconds. This patch also renames the define associated with the
Logitech 0xc007 product ID, which appeared to have a conflicting typo.
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Kyle Roarty <kroarty@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On one of my test machines nhi_mailbox_cmd() called from icm_suspend()
times out and returnes an error which then is propagated to the
caller and causes the entire system suspend to be aborted which isn't
very useful.
Instead of aborting system suspend, print the error into the log
and continue.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Michael Jamet <michael.jamet@intel.com>
X-Gene platforms describe multiple GHES error sources with the same
hardware error notification type (external interrupt) and interrupt
number.
Change the GHES interrupt request to support sharing the same IRQ.
This change includs contributions from Tuan Phan <tphan@apm.com>.
Signed-off-by: Loc Ho <lho@apm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Force alignment value to the default one (1 byte) if uninitialized.
This fixes hci_ll serdev driver (alignment = 0) and avoid any further
issues with upcoming drivers.
Signed-off-by: Loic Poulain <loic.poulain@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The for_each_child_of_node macro itself maintains the correct reference
count of the nodes so the explicit of_node_put() call causes a warning:
[ 0.098960] OF: ERROR: Bad of_node_put() on /pmc@7000e400/powergates/xusba
[ 0.098981] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.3 #1-NixOS
[ 0.098996] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT)
[ 0.099011] Call trace:
[ 0.099034] [<ffff00000808a048>] dump_backtrace+0x0/0x2a0
[ 0.099051] [<ffff00000808a30c>] show_stack+0x24/0x30
[ 0.099069] [<ffff0000084a6494>] dump_stack+0x9c/0xc0
[ 0.099090] [<ffff000008992214>] of_node_release+0xa4/0xa8
[ 0.099107] [<ffff0000084a9270>] kobject_put+0x90/0x1f8
[ 0.099124] [<ffff0000089914ac>] of_node_put+0x24/0x30
[ 0.099140] [<ffff00000898cec4>] __of_get_next_child+0x4c/0x70
[ 0.099155] [<ffff00000898cf28>] of_get_next_child+0x40/0x68
[ 0.099173] [<ffff0000090a099c>] tegra_pmc_early_init+0x4e8/0x5ac
[ 0.099189] [<ffff00000808399c>] do_one_initcall+0x5c/0x168
[ 0.099206] [<ffff000009050c98>] kernel_init_freeable+0xd4/0x240
[ 0.099224] [<ffff000008b2d658>] kernel_init+0x18/0x108
[ 0.099238] [<ffff0000080836c0>] ret_from_fork+0x10/0x50
(It's not very apparent from the OF documentation that of_node_put() is
not needed; the macro itself has no docstring and of_get_next_child()
used in the implementation begins with "Returns a node pointer with
refcount incremented" but then only at the very end of the docstring
the crucial part "Decrements the refcount of prev" is mentioned.)
Fixes: a38045121b ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For debugging very early boot problems we have CONFIG_PPC_EARLY_DEBUG,
which allows configuring the kernel such that it unconditionally writes
to a particular type of console, regardless of whether that console
exists or not. This is useful sometimes when the kernel crashes before
it can even determine what platform it's on, and therefore what consoles
exist.
However if you boot a kernel built this way on a different platform, it
will generally crash because it writes to a console that doesn't exist.
A particularly nasty instance of this is if you enable the hypervisor
console early debug, and then boot that kernel on bare metal. The result
is that the kernel calls "the hypervisor" very early in boot, but the
kernel *is* the hypervisor, so we jump to the system call handler and
start executing all sorts of code that isn't ready to be run. This may
lead to a machine check or check stop depending on how lucky you are.
Luckily there is an easy way to avoid this particular case. We simply
read the MSR before installing the hooks, and if we see MSR_HV is set
then we are the hypervisor and we definitely should not use the
hypervisor console.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The FEC Receive Control Register has a 14 bit field indicating the
longest frame that may be received. It is being set to 1522. Frames
longer than this are discarded, but counted as being in error.
When using DSA, frames from the switch has an additional header,
either 4 or 8 bytes if a Marvell switch is used. Thus a full MTU frame
of 1522 bytes received by the switch on a port becomes 1530 bytes when
passed to the host via the FEC interface.
Change the maximum receive size to 2048 - 64, where 64 is the maximum
rx_alignment applied on the receive buffer for AVB capable FEC
cores. Use this value also for the maximum receive buffer size. The
driver is already allocating a receive SKB of 2048 bytes, so this
change should not have any significant effects.
Tested on imx51, imx6, vf610.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the PHY is missing but expected, e.g. because of a typ0 in the dt
file, it is not possible to open the interface. ip link returns:
RTNETLINK answers: No such device
It is not very obvious what the problem is. Add a netdev_err() in this
case to make it easier to debug the issue.
[ 21.409385] fec 2188000.ethernet eth0: Unable to connect to phy
RTNETLINK answers: No such device
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Indirect access (PMI) to phy register only work in I2C mode. In
MDIO mode phy registers must be accessed directly. Introduced
struct lan9303_phy_ops to handle the two modes.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Preparing for the following fix of MDIO phy access:
Renamed functions that access PHY 1 and 2 indirectly through PMI
registers.
lan9303_port_phy_reg_wait_for_completion() to
lan9303_indirect_phy_wait_for_completion()
lan9303_port_phy_reg_read() to
lan9303_indirect_phy_read()
lan9303_port_phy_reg_write() to
lan9303_indirect_phy_write()
Also changed "val" parameter of lan9303_indirect_phy_write() to u16,
for clarity.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
lan9303_mdio_write()/_read() must multiply register number by 4 to get
offset.
Added some commments to the register definitions.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle that MDIO read with no response return 0xffff.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's a hardware bug, all window's overlay channel reset
value is same, hardware overlay would be die.
so we must initial difference id for each overlay channel.
The Channel register is supported on all vop will full design.
Following is the details for this register
VOP_WIN0_CTRL2
bit[7:4] win_rid_win0_cbr
axi read id of win0 cbr channel
bit[3:0] win_rid_win0_yrgb
axi read id of win0 yrgb channel
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049980-6239-1-git-send-email-mark.yao@rock-chips.com
Vop Full framework now has following vops:
IP version chipname
3.1 rk3288
3.2 rk3368
3.4 rk3366
3.5 rk3399 big
3.6 rk3399 lit
3.7 rk3228
3.8 rk3328
The above IP version is from H/W define, some of vop support get
the IP version from VERSION_INFO register, some are not.
hardcode the IP version for each vop to identify them.
major version: used for IP structure, Vop full framework is 3,
vop little framework is 2.
minor version: on same structure, newer design vop will bigger
then old one.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049971-6131-1-git-send-email-mark.yao@rock-chips.com
In the hardware design process, the design of line flags
register is associated with the interrupt register,
placing the line flags in the interrupt definition is
more reasonable, and it would make multi-vop define easilier.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049960-6006-1-git-send-email-mark.yao@rock-chips.com
Since the drm atomic framework, only a small part of the vop
register needs sync write, Currently seems only following registers
need sync write:
cfg_done, standby and interrupt related register.
All ctrl registers are using the sync write method that is
inefficient, hardcode the write_relaxed flags to vop registers,
then can only do synchronize write for those actual needed register.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049953-5946-1-git-send-email-mark.yao@rock-chips.com
At present we are using init_table to initialize some
registers, but the Register init table use un-document define,
it is unreadable, and sometimes we only want to update tiny
bits, init table method is not friendly, it's diffcult to
reuse for difference chips.
To make it clean, initialize registers directly, and drops
init_table mechanism out.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049946-5877-1-git-send-email-mark.yao@rock-chips.com
This patch drops two incorrect usages of tcm_qla2xxx_free_cmd()
during TMR ABORT within tcm_qla2xxx_handle_data_work() and
tcm_qla2xxx_aborted_task(), which where attempting to dispatch
into workqueue context to do tcm_qla2xxx_complete_free() and
subsequently invoke transport_generic_free_cmd().
This is incorrect because during TMR ABORT target-core will
drop the outstanding se_cmd->cmd_kref references once it has
quiesced the se_cmd via transport_wait_for_tasks(), and in
the case of qla2xxx it should not attempt to do it's own
transport_generic_free_cmd() once the abort has occured.
As reported by Pascal, this was originally manifesting as a
BUG_ON(cmd->cmd_in_wq) in qlt_free_cmd() during TMR ABORT,
with a LIO backend that had sufficently high enough WRITE
latency to trigger a host side TMR ABORT_TASK.
(v2: Drop the qla_tgt_cmd->write_pending_abort_comp changes,
as they will be addressed in a seperate series)
Reported-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Tested-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Cc: Pascal de Bruijn <p.debruijn@unilogic.nl>
Reported-by: Lukasz Engel <lukasz.engel@softax.pl>
Cc: Lukasz Engel <lukasz.engel@softax.pl>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Cc: Quinn Tran <quinn.tran@cavium.com>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The current logic of calculating sg_nents can fail
if data_offset % PAGE_SIZE is not zero.
For example -
PAGE_SIZE = 4096
data_len = 3072
data_offset = 3072
As per current logic
sg_nents = max(1UL, DIV_ROUND_UP(data_len, PAGE_SIZE));
sg_nents = max(1UL, DIV_ROUND_UP(3072, 4096));
sg_nents = 1
But as data_offset % PAGE_SIZE = 3072 we should skip 3072 bytes
skip = 3K
sg_nents = max(1UL, DIV_ROUND_UP(3K(skip) + 3K(data_len), 4K(PAGE_SIZE));
sg_nents = 2;
This patch fixes this issue by adding skip to data_len.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
In case of multiple text responses iscsi-target
sets both 'F' and 'C' bit for the final text response
pdu, this issue happens because hdr->flags is not
zeroed out before ORing with 'F' bit.
This patch removes the | operator to fix this issue.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
On receiving text request iscsi-target allocates buffer for
payload in iscsit_handle_text_cmd() and assigns buffer pointer
to cmd->text_in_ptr, this buffer is currently freed in
iscsit_release_cmd(), if iscsi-target sets 'C' bit in text
response then it will receive another text request from the
initiator with ttt != 0xffffffff in this case iscsi-target
will find cmd using itt and call iscsit_setup_text_cmd()
which will set cmd->text_in_ptr to NULL without freeing
previously allocated buffer.
This patch fixes this issue by calling kfree(cmd->text_in_ptr)
in iscsit_setup_text_cmd() before assigning NULL to it.
For the first text request cmd->text_in_ptr is NULL as
cmd is memset to 0 in iscsit_allocate_cmd().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Cc: <stable@vger.kernel.org> # 4.0+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
On initial tcmu_configure_device call the info->name would
have already been allocated and set, so on the second call
make sure to free it first.
Reported-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
For most case the sg->length equals to PAGE_SIZE, so this bug won't
be triggered. Otherwise this will crash the kernel, for example when
all segments' sg->length equal to 1K.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
ADC clock input is provided to internal prescaler (that decreases its
frequency). It's then used as reference clock for conversions.
- Fix common clock rate used then by stm32-adc sub-devices. Take common
prescaler into account. Currently, rate is used to set "boost" mode.
It may unnecessarily be set. This impacts power consumption.
- Fix ADC max clock rate on STM32H7 (fADC from datasheet). Currently,
prescaler may be set too low. This can result in ADC reference
clock used for conversion to exceed max allowed clock frequency.
Fixes: 95e339b6e8 ("iio: adc: stm32: add support for STM32H7")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Comedi's read and write file operation handlers (`comedi_read()` and
`comedi_write()`) currently call `copy_to_user()` or `copy_from_user()`
whilst in the `TASK_INTERRUPTIBLE` state, which falls foul of the
`might_fault()` checks when enabled. Fix it by setting the current task
state back to `TASK_RUNNING` a bit earlier before calling these
functions.
Reported-by: Piotr Gregor <piotrgregor@rsyncme.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 4.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Running sparse revealed that the members of hfa384x_comm_tallies_16/32
were defined as u16/u32, but were actually used as __le16/__le32.
This patch changes the member types to reflect their use.
Signed-off-by: Christopher H Pezley <chris@pezley.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not initialise static to 0.
Static variables by default initialise to 0.
This patch fixes the errors found by checkpatch.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field in hfa384x_ps_user_count was defined as u16 but used as __le16
Changed type to __le16 for consistency
Signed-off-by: Manny Vindiola <mannyv@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>