Commit graph

368,847 commits

Author SHA1 Message Date
Jacopo Mondi
cb715d0ad0 pinctrl: rza1: Remove suffix from gpiochip label
The OF node name already contains the gpio chip identifier, no need to
append it when creating the label.

The following debug message clearly shows the suffix is not required
"pinctrl-rza1 fcfe3000.pin-controller: Parsed gpiochip gpio-0-0 with 6
pins"

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31 14:45:18 +02:00
Matan Barak
8eb19e8e7c IB/core: Expose ioctl interface through experimental Kconfig
Add CONFIG_INFINIBAND_EXP_USER_ACCESS that enables the ioctl
interface. This interface is experimental and is subject to change.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-31 08:35:14 -04:00
Matan Barak
5242711294 IB/core: Assign root to all drivers
In order to use the parsing tree, we need to assign the root
to all drivers. Currently, we just assign the default parsing
tree via ib_uverbs_add_one. The driver could override this by
assigning a parsing tree prior to registering the device.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-31 08:35:14 -04:00
Matan Barak
9ee79fce36 IB/core: Add completion queue (cq) object actions
Adding CQ ioctl actions:
1. create_cq
2. destroy_cq

This requires adding the following:
1. A specification describing the method
	a. Handler
	b. Attributes specification
		Each attribute is one of the following:
		a. PTR_IN - input data
			    Note: This could be encoded inlined for
				  data < 64bit
		b. PTR_OUT - response data
		c. IDR - idr based object
		d. FD - fd based object
                Blobs attributes (clauses a and b) contain their type,
	        while objects specifications (clauses c and d)
                contains the expected object type (for example, the
                given id should be UVERBS_TYPE_PD) and the required
                access (READ, WRITE, NEW or DESTROY). If a NEW is
                required, the new object's id will be assigned to this
                attribute. All attributes could get UA_FLAGS
                attribute. Currently we support stating that an
		attribute is mandatory or that the specification size
                corresponds to a lower bound (and that this attribute
		could be extended).
		We currently add both default attributes and the two
		generic UHW_IN and UHW_OUT driver specific attributes.
2. Handler
   A handler gets a uverbs_attr_bundle. The handler developer uses
   uverbs_attr_get to fetch an attribute of a given id.
   Each of these attribute groups correspond to the specification
   group defined in the action (clauses 1.b and 1.c respectively).
   The indices of these arrays corresponds to the attribute ids
   declared in the specifications (clause 2).

   The handler is quite simple. It assumes the infrastructure fetched
   all objects and locked, created or destroyed them as required by
   the specification. Pointer (or blob) attributes were validated to
   match their required sizes. After the handler finished, the
   infrastructure commits or rollbacks the objects.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-31 08:35:13 -04:00
Matan Barak
d70724f149 IB/core: Add legacy driver's user-data
In this phase, we don't want to change all the drivers to use
flexible driver's specific attributes. Therefore, we add two default
attributes: UHW_IN and UHW_OUT. These attributes are optional in some
methods and they encode the driver specific command data. We add
a function that extract this data and creates the legacy udata over
it.

Driver's data should start from UVERBS_UDATA_DRIVER_DATA_FLAG. This
turns on the first bit of the namespace, indicating this attribute
belongs to the driver's namespace.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-31 08:35:13 -04:00
Matan Barak
4da70da23e IB/core: Explicitly destroy an object while keeping uobject
When some objects are destroyed, we need to extract their status at
destruction. After object's destruction, this status
(e.g. events_reported) relies in the uobject. In order to have the
latest and correct status, the underlying object should be destroyed,
but we should keep the uobject alive and read this information off the
uobject. We introduce a rdma_explicit_destroy function. This function
destroys the class type object (for example, the IDR class type which
destroys the underlying object as well) and then convert the uobject
to be of a null class type. This uobject will then be destroyed as any
other uobject once uverbs_finalize_object[s] is called.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-31 08:35:11 -04:00
Matan Barak
118620d368 IB/core: Add uverbs merge trees functionality
Different drivers support different features and even subset of the
common uverbs implementation. Currently, this is handled as bitmask
in every driver that represents which kind of methods it supports, but
doesn't go down to attributes granularity. Moreover, drivers might
want to add their specific types, methods and attributes to let
their user-space counter-parts be exposed to some more efficient
abstractions. It means that existence of different features is
validated syntactically via the parsing infrastructure rather than
using a complex in-handler logic.

In order to do that, we allow defining features and abstractions
as parsing trees. These per-feature parsing tree could be merged
to an efficient (perfect-hash based) parsing tree, which is later
used by the parsing infrastructure.

To sum it up, this makes a parse tree unique for a device and
represents only the features this particular device supports.
This is done by having a root specification tree per feature.
Before a device registers itself as an IB device, it merges
all these trees into one parsing tree. This parsing tree
is used to parse all user-space commands.

A future user-space application could read this parse tree. This
tree represents which objects, methods and attributes are
supported by this device.

This is based on the idea of
Jason Gunthorpe <jgunthorpe@obsidianresearch.com>

Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-31 08:35:10 -04:00
Matan Barak
09e3ebf8c1 IB/core: Add DEVICE object and root tree structure
This adds the DEVICE object. This object supports creating the context
that all objects are created from. Moreover, it supports executing
methods which are related to the device itself, such as QUERY_DEVICE.
This is a singleton object (per file instance).

All standard objects are put in the root structure. This root will later
on be used in drivers as the source for their whole parsing tree.
Later on, when new features are added, these drivers could mix this root
with other customized objects.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-31 08:35:10 -04:00
Matan Barak
5009010fbf IB/core: Declare an object instead of declaring only type attributes
Switch all uverbs_type_attrs_xxxx with DECLARE_UVERBS_OBJECT
macros. This will be later used in order to embed the object
specific methods in the objects as well.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-31 08:35:09 -04:00
Matan Barak
fac9658cab IB/core: Add new ioctl interface
In this ioctl interface, processing the command starts from
properties of the command and fetching the appropriate user objects
before calling the handler.

Parsing and validation is done according to a specifier declared by
the driver's code. In the driver, all supported objects are declared.
These objects are separated to different object namepsaces. Dividing
objects to namespaces is done at initialization by using the higher
bits of the object ids. This initialization can mix objects declared
in different places to one parsing tree using in this ioctl interface.

For each object we list all supported methods. Similarly to objects,
methods are separated to method namespaces too. Namespacing is done
similarly to the objects case. This could be used in order to add
methods to an existing object.

Each method has a specific handler, which could be either a default
handler or a driver specific handler.
Along with the handler, a bunch of attributes are specified as well.
Similarly to objects and method, attributes are namespaced and hashed
by their ids at initialization too. All supported attributes are
subject to automatic fetching and validation. These attributes include
the command, response and the method's related objects' ids.

When these entities (objects, methods and attributes) are used, the
high bits of the entities ids are used in order to calculate the hash
bucket index. Then, these high bits are masked out in order to have a
zero based index. Since we use these high bits for both bucketing and
namespacing, we get a compact representation and O(1) array access.
This is mandatory for efficient dispatching.

Each attribute has a type (PTR_IN, PTR_OUT, IDR and FD) and a length.
Attributes could be validated through some attributes, like:
(*) Minimum size / Exact size
(*) Fops for FD
(*) Object type for IDR

If an IDR/fd attribute is specified, the kernel also states the object
type and the required access (NEW, WRITE, READ or DESTROY).
All uobject/fd management is done automatically by the infrastructure,
meaning - the infrastructure will fail concurrent commands that at
least one of them requires concurrent access (WRITE/DESTROY),
synchronize actions with device removals (dissociate context events)
and take care of reference counting (increase/decrease) for concurrent
actions invocation. The reference counts on the actual kernel objects
shall be handled by the handlers.

 objects
+--------+
|        |
|        |   methods                                                                +--------+
|        |   ns         method      method_spec                           +-----+   |len     |
+--------+  +------+[d]+-------+   +----------------+[d]+------------+    |attr1+-> |type    |
| object +> |method+-> | spec  +-> +  attr_buckets  +-> |default_chain+--> +-----+   |idr_type|
+--------+  +------+   |handler|   |                |   +------------+    |attr2|   |access  |
|        |  |      |   +-------+   +----------------+   |driver chain|    +-----+   +--------+
|        |  |      |                                    +------------+
|        |  +------+
|        |
|        |
|        |
|        |
|        |
|        |
|        |
|        |
|        |
|        |
+--------+

[d] = Hash ids to groups using the high order bits

The right types table is also chosen by using the high bits from
the ids. Currently we have either default or driver specific groups.

Once validation and object fetching (or creation) completed, we call
the handler:
int (*handler)(struct ib_device *ib_dev, struct ib_uverbs_file *ufile,
               struct uverbs_attr_bundle *ctx);

ctx bundles attributes of different namespaces. Each element there
is an array of attributes which corresponds to one namespaces of
attributes. For example, in the usually used case:

 ctx                               core
+----------------------------+     +------------+
| core:                      +---> | valid      |
+----------------------------+     | cmd_attr   |
| driver:                    |     +------------+
|----------------------------+--+  | valid      |
                                |  | cmd_attr   |
                                |  +------------+
                                |  | valid      |
                                |  | obj_attr   |
                                |  +------------+
                                |
                                |  drivers
                                |  +------------+
                                +> | valid      |
                                   | cmd_attr   |
                                   +------------+
                                   | valid      |
                                   | cmd_attr   |
                                   +------------+
                                   | valid      |
                                   | obj_attr   |
                                   +------------+

Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-31 08:35:09 -04:00
Adit Ranadive
14d6c3a83f RDMA/vmw_pvrdma: Fix a signedness
Fixes: 29c8d9eba5 ("IB: Add vmw_pvrdma driver")
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-31 08:35:08 -04:00
Aditya Sarwade
72f9b089ec RDMA/vmw_pvrdma: Report network header type in WC
We should report the network header type in the work completion so that
the kernel can infer the right RoCE type headers.

Reviewed-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Aditya Sarwade <asarwade@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-31 08:35:08 -04:00
Roland Dreier
79364227e6 IB/core: Add might_sleep() annotation to ib_init_ah_from_wc()
For RoCE, ib_init_ah_from_wc() can follow the path

    ib_init_ah_from_wc() ->
      rdma_addr_find_l2_eth_by_grh() ->
        rdma_resolve_ip()

and rdma_resolve_ip() will sleep in kzalloc() and wait_for_completion().

However, developers will not see any warnings if they use ib_init_ah_from_wc()
in an atomic context and test only on IB, because the function doesn't
sleep in that case.

Add a might_sleep() so that lockdep will catch bugs no matter what hardware is
used to test.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-31 08:35:07 -04:00
Roland Dreier
c761611811 IB/cm: Fix sleeping in atomic when RoCE is used
A couple of places in the CM do

    spin_lock_irq(&cm_id_priv->lock);
    ...
    if (cm_alloc_response_msg(work->port, work->mad_recv_wc, &msg))

However when the underlying transport is RoCE, this leads to a sleeping function
being called with the lock held - the callchain is

    cm_alloc_response_msg() ->
      ib_create_ah_from_wc() ->
        ib_init_ah_from_wc() ->
          rdma_addr_find_l2_eth_by_grh() ->
            rdma_resolve_ip()

and rdma_resolve_ip() starts out by doing

    req = kzalloc(sizeof *req, GFP_KERNEL);

not to mention rdma_addr_find_l2_eth_by_grh() doing

    wait_for_completion(&ctx.comp);

to wait for the task that rdma_resolve_ip() queues up.

Fix this by moving the AH creation out of the lock.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-31 08:35:07 -04:00
Ingo Molnar
3e83dfd5d8 Merge branch 'x86/mm' into x86/platform, to pick up TLB flush dependency
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-31 14:20:06 +02:00
Lior David
69fecf599f wil6210: ensure P2P device is stopped before removing interface
User space can remove the P2P management interface while it is active
(for example, while listen/search is active) and this can cause
a crash. Ensure the P2P device is fully stopped before removing.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31 15:19:54 +03:00
Lior David
d83ad4c4fd wil6210: increase connect timeout
Connect can take longer than current timeout in some scenarios,
for example with long-range antenna array. Increase the timeout
to support these scenarios.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31 15:19:50 +03:00
Dedy Lansky
7086d86175 wil6210: clear PAL_UNIT_ICR part of device reset
When FW starts running it can get D0 to D3 interrupt that is a leftover
from previous system suspend while FW was not running.
As this interrupt is not relevant anymore, clear it part of device reset
procedure.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31 15:19:45 +03:00
Dedy Lansky
1490846d25 wil6210: move pre-FW configuration to separate function
Re-arrange the code to have dedicated function for device configuration
which takes place before FW starts running.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31 15:19:40 +03:00
Lazar Alexei
761f8e4d46 wil6210: align to latest auto generated wmi.h
Align to latest version of the auto generated wmi file
describing the interface with FW.

Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31 15:19:35 +03:00
Gidon Studinski
5f591dac9f wil6210: make debugfs compilation optional
Since debugfs is a kernel configuration option, enable the driver to
compile without debugfs.

Signed-off-by: Gidon Studinski <qca_gidons@qca.qualcomm.com>
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31 15:19:31 +03:00
Lior David
40cbd88be7 wil6210: ratelimit errors in TX/RX interrupts
Sometimes there is a firmware crash but the hardware
is not fully stopped and continue to send TX/RX interrupts.
This can cause an overload of messages which can bring the
host down. Add ratelimit to these error messages to fix this.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31 15:19:26 +03:00
Hauke Mehrtens
c0cc00f250 ath10k: activate user space firmware loading again
In commit 9f5bcfe933 ("ath10k: silence firmware file probing
warnings") the firmware loading was changed from request_firmware() to
request_firmware_direct() to silence some warnings in case it fails.
request_firmware_direct() directly searches in the file system only and
does not send a hotplug event to user space in case it could not find
the firmware directly.
In LEDE we use a user space script to extract the calibration data from
the flash memory which gets triggered by the hotplug event. This way the
firmware gets extracted from some vendor specific partition when the
driver requests this firmware. This mechanism does not work any more
after this change.

Fixes: 9f5bcfe933 ("ath10k: silence firmware file probing warnings")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31 15:15:15 +03:00
Erik Stromdahl
30b83fff6d ath10k: sdio: remove unused struct member
irq_wq in struct ath10k_sdio is a remnant from an earlier
version of the sdio patchset.

Its use was removed as a result of Kalle's review, but somehow
the struct member survived.

It is not used and can therefore safely be removed.

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31 15:14:18 +03:00
Ryan Hsu
c9353bf483 ath10k: fix napi_poll budget overflow
In napi_poll, the budget number is used to control the amount of packets
we should handle per poll to balance the resource in the system.

In the list of the amsdu packets reception, we check if there is budget
count left and handle the complete list of the packets, that it will have
chances the very last list will over the budget leftover.

So adding one more parameter - budget_left, this would help while
traversing the list to avoid handling more than the budget given.

Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Fix-suggested-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Link: https://lkml.kernel.org/r/26670dce-4dd2-f8e4-0e14-90d74257e739@virtuozzo.com
Signed-off-by: Ryan Hsu <ryanhsu@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31 15:13:18 +03:00
Martin Schwidefsky
0fdd49ad1b A bugfix in the ccw translation code.
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZdiEwAAoJEN7Pa5PG8C+vPooQAJBpWITzls7r4vBpamg/24Ec
 VnVClfQte/sfpBzP18R9h7HeC9g9gFHTjmZ6hQMg386wIumnvESAx3moVG3gTGsV
 FBpTgAwb1s0m/x4nuVVxoHOi9RMqThldUhVrOo5o6DnqabMlkb0A7xYVByZBfQEp
 vaenzOTtRMltUADu7gWIjw4+tz35r4S5/l/WGqbGp6HYHbNwD8brfv7P8dPZ4u9l
 EMxzg47zeVeEb9WLA9fGUX2iO9wqOgHjPcuzO3Uua8rAsmR0MUBmYPGvRHN78MUr
 LD7qsCsmAmmYHPoopjG8o4R+PjkUNnBdvqKmLJYnEAP1wGOWQIiEWFg0+YAVtuvt
 8E0/Rx40DFXQfYB4hu3FoeGupksJ85ID07/0dzozWK0zqeMjo05IGoQHJoGDlTJy
 SUMhGPGXRReDKBJT3k1jUbAtHRK1WLukXTcOdSQNBXOuU3zDx9gYndLEDopoWu4R
 +rCrb38ekC5G/PtEPQsQrf+JXy+mwXOEv2k1OAFJ4jdh0oAZwdGTShWf0/431Kd0
 siSXCKJ2l1aIN3IonwTTF9S/6bEXCxGuTKfR7ANmZ3FVsIfQo9ej8N50iGC0JZ/b
 XCITkl8DlsM5o9R91wCsIuhO8+5SjtwjA3iMYAAfNLtekIrAniuwulf5nGFi0tA+
 in8srHJGUQZMaO57Caox
 =CQfQ
 -----END PGP SIGNATURE-----

Merge tag 'vfio-ccw-20170724' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into fixes

Pull vfio-ccw fix from Cornelia Huck:
"A bugfix in the ccw translation code."
2017-08-31 14:05:20 +02:00
Fenglin Wu
4e83ac4cfb pinctrl: qcom: spmi-gpio: Correct power_source range check
Power source selection in DIG_VIN_CTL is indexed from 0, in the range
check it shouldn't be equal to the total number of power sources.

Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31 13:59:15 +02:00
Arvind Yadav
72c7c78e68 gpio: pl061: constify amba_id
amba_id are not supposed to change at runtime. All functions
working with const amba_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31 13:57:57 +02:00
Bhumika Goyal
ae9d7f83a5 pinctrl: freescale: make mxs_regs const
Make these const as they are only stored in the const field of a
mxs_pinctrl_soc_data structure.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31 13:57:01 +02:00
Andrew Jeffery
5241bd16c7 pinctrl: aspeed: Rework strap register write logic for the AST2500
Yong Li found that writes to the AST2500 strapping register were not
properly supported by the Aspeed pinctrl core and provided a patch to
rectify the problem. Several revisions of the patch were posted and
ultimately v4 should have been applied, however some unfortunate
liberal application of tags on my part lead to confusion between v3[1]
and v4[2].

Generate the diff between v3 and v4 to apply as a fixup patch.

[1] http://patchwork.ozlabs.org/patch/801662/
[2] http://patchwork.ozlabs.org/patch/802946/

Cc: Yong Li <sdliyong@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31 13:39:38 +02:00
Dan Carpenter
faaaba0652 pinctrl: rza1: off by one in rza1_parse_gpiochip()
The rza1_pctl->ports[] array has RZA1_NPORTS (12) elements.  The > here
should be >= to prevent an out of bounds access.

Fixes: 5a49b644b3 ("pinctrl: Renesas RZ/A1 pin and gpio controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31 13:37:16 +02:00
Jerome Brunet
795c633f60 mmc: meson-gx: fix __ffsdi2 undefined on arm32
Using __bf_shf does not compile on arm 32 architecture.
This has gone unnoticed till now cause the driver is only used on arm64.

In addition, __bf_shf was already used in the driver without any issue.
It was used on a constant value, so the call was probably optimized
away.

Replace __bf_shf by __ffs fixes the problem

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-31 12:42:57 +02:00
Sean Young
fce4b371fe media: serial_ir: fix tx timing calculation on 32-bit
Move the calculation to where it is needed, so the result doesn't
need to be stored in the device struct.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-31 05:36:42 -04:00
Sean Young
766cbb3189 media: rc: gpio-ir-tx: use ktime accessor functions
Prefer using accessor functions so we are not dependent on the ktime_t
type.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-31 05:35:54 -04:00
Jasmin Jessich
800846c4d9 media: rc: use ktime accessor functions
Prefer using accessor functions so we are not dependent on the ktime_t
type.

Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-31 05:35:18 -04:00
Vinay Simha BN
2c7710847c pinctrl: qcom: General Purpose clocks for apq8064
Add support for general purpose (GP) clocks
for apq8064

DT binding documentation updated for
qcom,apq8064-pinctrl general purpose (GP) clocks.

Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31 11:32:19 +02:00
H. Nikolaus Schaller
5d01fd38a3 power: supply: bq27xxx: enable writing capacity values for bq27421
Tested on Pyra prototype with bq27421.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-31 10:25:24 +02:00
Baolin Wang
41d32cfce1 pinctrl: sprd: Add Spreadtrum pin control driver
This patch adds the pin control driver for Spreadtrum SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31 09:23:14 +02:00
Baolin Wang
6606bc9dee pinctrl: Add sleep related state to indicate sleep related configs
In some scenarios, we should set some pins as input/output/pullup/pulldown
when the specified system goes into deep sleep mode, then when the system
goes into deep sleep mode, these pins will be set automatically by hardware.

That means some pins are not controlled by any specific driver in the OS, but
need to be controlled when entering sleep mode. Thus we introduce one sleep
state config into pinconf-generic for users to configure.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31 09:15:21 +02:00
Ryder Lee
ca8febe8f9 pinctrl: mediatek: update PCIe mux data for MT7623
MT2701 shares the same driver with MT7623, but there is a slight difference
between their pin functions (e.g., PCIe), so we update the different parts
in pinmux table.

Doing so, SoC could choose the correct mux setting via their own pinfun.h.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Cc: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31 09:13:03 +02:00
Linus Walleij
9e238e380c Revert "gpiolib: request the gpio before querying its direction"
This reverts commit 108d23e322.
It turns out this causes a regression on the OMAP, Marvell
and Renesas.

Reported-by: Tony Lindgren <tony@atomide.com>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31 09:05:30 +02:00
David S. Miller
ea3100ab01 mlx5-updates-2017-08-31 (GRE Offloads support)
This series provides the support for MPLS RSS and GRE TX offloads and
 RSS support.
 
 The first patch from Gal and Ariel provides the mlx5 driver support for
 ConnectX capability to perform IP version identification and matching in
 order to distinguish between IPv4 and IPv6 without the need to specify the
 encapsulation type, thus perform RSS in MPLS automatically without
 specifying MPLS ethertyoe. This patch will also serve for inner GRE IPv4/6
 classification for inner GRE RSS.
 
 2nd patch from Gal, Adds the TX offloads support for GRE tunneled packets,
 by reporting the needed netdev features.
 
 3rd patch from Gal, Adds GRE inner RSS support by creating the needed device
 resources (Steering Tables/rules and traffic classifiers) to Match GRE traffic
 and perform RSS hashing on the inner headers.
 
 Improvement:
 Testing 8 TCP streams bandwidth over GRE:
     System: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
     NIC: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
     Before: 21.3 Gbps (Single RQ)
     Now   : 90.5 Gbps (RSS spread on 8 RQs)
 
 Thanks,
 Saeed.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJZp0JUAAoJEEg/ir3gV/o+nxkH+QFnIv26BZ/0aNQFyNJTRUqg
 cGLIjCnlPUwVoy5U5zOIFTCdgGR/PUrzFcSa/qv9hjhprsvfs37V1R9B/2vVeJbr
 TdEzvdIYnMHY+EhafkPWhuaUYO/Ng/W8VSnxXgJw2mpWL1wN4wF6c3f0X/YuG0Sa
 uNAEmFe26TItD7P+vIzV8yQB/3tWZjQRbK2HcrHyd4qmuLjI9yVXsuyXzedJ8Ccn
 YJAfKcshULeWRwMXh/QH+MYYtWbQ8FRKMhxOdTpeC//803xC2E1XFBHsRu8io1HA
 kWJYDsFLC+v3vYjZ0JK9IAU4H9UBKh6lnd8BrjtbjJg0nuUJ3K3Lc80UZU/tEhU=
 =L5m4
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-GRE-Offload' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2017-08-31 (GRE Offloads support)

This series provides the support for MPLS RSS and GRE TX offloads and
RSS support.

The first patch from Gal and Ariel provides the mlx5 driver support for
ConnectX capability to perform IP version identification and matching in
order to distinguish between IPv4 and IPv6 without the need to specify the
encapsulation type, thus perform RSS in MPLS automatically without
specifying MPLS ethertyoe. This patch will also serve for inner GRE IPv4/6
classification for inner GRE RSS.

2nd patch from Gal, Adds the TX offloads support for GRE tunneled packets,
by reporting the needed netdev features.

3rd patch from Gal, Adds GRE inner RSS support by creating the needed device
resources (Steering Tables/rules and traffic classifiers) to Match GRE traffic
and perform RSS hashing on the inner headers.

Improvement:
Testing 8 TCP streams bandwidth over GRE:
    System: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
    NIC: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
    Before: 21.3 Gbps (Single RQ)
    Now   : 90.5 Gbps (RSS spread on 8 RQs)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30 22:14:37 -07:00
Rick Farrington
acfb98b996 liquidio: fix crash in presence of zeroed-out base address regs
Fix crash in linux PF driver when BARs have been cleared/de-programmed;
fail early init (prior to mapping BARs) if the BAR0 or
BAR1 registers are zero.

This situation can arise when the PF is added to a VM (PCI pass-through),
then a PF FLR is issued (in the VM).  After this occurs, the BAR registers
will be zero. If we attempt to load the PF driver in the host
(after VM has been shutdown), the host can reset.

Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30 22:07:09 -07:00
Frederic Barrat
197267d035 cxl: Fix driver use count
cxl keeps a driver use count, which is used with the hash memory model
on p8 to know when to upgrade local TLBIs to global and to trigger
callbacks to manage the MMU for PSL8.

If a process opens a context and closes without attaching or fails the
attachment, the driver use count is never decremented. As a
consequence, TLB invalidations remain global, even if there are no
active cxl contexts.

We should increment the driver use count when the process is attaching
to the cxl adapter, and not on open. It's not needed before the
adapter starts using the context and the use count is decremented on
the detach path, so it makes more sense.

It affects only the user api. The kernel api is already doing The
Right Thing.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.2+
Fixes: 7bb5d91a4d ("cxl: Rework context lifetimes")
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:49 +10:00
Aneesh Kumar K.V
22259a6e80 powerpc/mm/cxl: Add barrier when setting mm cpumask
We need to add memory barrier so that the page table walk doesn't happen
before the cpumask is set and made visible to the other cpus. We need
to use a sync here instead of lwsync because lwsync is not sufficient for
store/load ordering.

We also need to add an if (mm) check so that we do the right thing when called
with a kernel context. For kernel context, we have mm = NULL. W.r.t kernel
address we can skip setting the mm cpumask.

Fixes: 0f4bc0932e ("powerpc/mm/cxl: Add the fault handling cpu to mm cpumask")
Cc: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:39 +10:00
Sukadev Bhattiprolu
b6622a339e powerpc/powernv: Move GET_FIELD/SET_FIELD to vas.h
Move the GET_FIELD and SET_FIELD macros to vas.h as VAS and other
users of VAS, including NX-842 can use those macros.

There is a lot of related code between the VAS/NX kernel drivers
and skiboot. For consistency, switch the order of parameters in
SET_FIELD to match the order in skiboot.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31 14:26:20 +10:00
Anup Patel
1da92afbbf mailbox: bcm-flexrm-mailbox: Use txdone_ack instead of txdone_poll
Currently, FlexRM driver uses txdone_poll method of Linux Mailbox
to model the send_data() callback. To achieve this, we have introduced
"last_pending_msg" pointer for each FlexRM ring which keeps track of
the message that did not fit in the FlexRM ring.

This patch updates FlexRM driver to use txdone_ack method instead of
txdone_poll method because txdone_poll is not efficient for FlexRM
and requires additional tracking in FlexRM driver.

Also, moving to txdone_ack method helps us remove "last_pending_msg"
pointer and last_tx_done() callback.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-08-31 08:39:04 +05:30
Anup Patel
1f7466c6b4 mailbox: bcm-flexrm-mailbox: Use bitmap instead of IDA
Currently, we are using IDA library for managing IDs
on a FlexRM ring. The IDA library dynamically allocates
memory for underlying data structures which can cause
potential locking issue when allocating/free IDs from
flexrm_new_request() and flexrm_process_completions().

To tackle this, we replace use of IDA with bitmap for
each FlexRM ring and also protect the bitmap with FlexRM
ring lock.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-08-31 08:39:03 +05:30
Anup Patel
6d2061b981 mailbox: bcm-flexrm-mailbox: Fix mask used in CMPL_START_ADDR_VALUE()
The mask used in CMPL_START_ADDR_VALUE() should be 27bits instead of
26bits. This incorrect mask was causing completion writes to 40bits
physical address fail.

This patch fixes mask used in CMPL_START_ADDR_VALUE() macro.

Fixes: dbc049eee7 ("mailbox: Add driver for Broadcom FlexRM
ring manager")

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-08-31 08:39:00 +05:30
Anup Patel
acf7e50a6b mailbox: bcm-flexrm-mailbox: Add debugfs support
This patch adds debugfs support to Broadcom FlexRM driver
so that we can see FlexRM ring state when any issue happens.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-08-31 08:38:59 +05:30