Commit graph

368,847 commits

Author SHA1 Message Date
Ard Biesheuvel
0426a4e68f efi/libstub/arm64: Force 'hidden' visibility for section markers
To prevent the compiler from emitting absolute references to the section
markers when running in PIC mode, override the visibility to 'hidden' for
all contents of asm/sections.h

Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818194947.19347-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-21 09:43:49 +02:00
Ard Biesheuvel
f56ab9a5b7 efi/arm: Don't mark ACPI reclaim memory as MEMBLOCK_NOMAP
On ARM, regions of memory that are described by UEFI as having special
significance to the firmware itself are omitted from the linear mapping.
This is necessary since we cannot guarantee that alternate mappings of
the same physical region will use attributes that are compatible with
the ones we use for the linear mapping, and aliases with mismatched
attributes are prohibited by the architecture.

The above does not apply to ACPI reclaim regions: such regions have no
special significance to the firmware, and it is up to the OS to decide
whether or not to preserve them after it has consumed their contents,
and for how long, after which time the OS can use the memory in any way
it likes. In the Linux case, such regions are preserved indefinitely,
and are simply treated the same way as other 'reserved' memory types.

Punching holes into the linear mapping causes page table fragmentation,
which increases TLB pressure, and so we should avoid doing so if we can.
So add a special case for regions of type EFI_ACPI_RECLAIM_MEMORY, and
memblock_reserve() them instead of marking them MEMBLOCK_NOMAP.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818194947.19347-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-21 09:43:49 +02:00
Dave Airlie
3aadb888b1 drm/tegra: Changes for v4.14-rc1
This contains a couple of fixes and improvements for host1x, with some
 preparatory work for Tegra186 support.
 
 The remainder is cleanup and minor bugfixes for Tegra DRM along with
 enhancements to debuggability.
 
 There have also been some enhancements to the kernel interfaces for
 host1x job submissions and support for mmap'ing PRIME buffers directly,
 all of which get the interfaces very close to ready for serious work.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlmXBm4THHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoYDJD/9ILmkCZPmv/LnYjQ1vivHN2cwboj2K
 0yM6fwHE2JrvavKaAt1DDxZElxzL4Gcihcg6ALIc0/RH9S82nz7eNMkwLgfLLPHl
 PFCv/rGkFkyQpqOXvUmLYBGL7uNo3GDfT3fE5fJ9ZfRWFLBaI6DgT6flzTZBsd0T
 vC+mExHBdobu9bsyR95NpHGjDPQoUK//m35p+vZixnyjhCbDM/+qKA/iSUE5kaEY
 S2huX/Gzl8jbi2d2Ax9dz905gYrDKl6y5qlGA3BGKpTPxOd/kYtc2eClSRHc1hno
 WT/9yFeTFyXjxarpY9nAT2NNfVn+crvB3vBwP97I6YKszBbGUOHGYqhBy7r0W+Fl
 MqMvlqTJgN4OlVL7pGiCkeDUKZyJ697EZqNdeYREiKwPtsmSiZcnxxk5BcTEzXBX
 cF0udAVfEK8MekjPDz1CWGbH2uMuXxsH+7VTKt3avVYlN8J9rIhZv9hGK6g/znyd
 4N4eyzDxRtChhAcin1fQJosAzc8oTSEE21WQW2D8vme+t0Yx9Oiy7BG5uj+yLruu
 0/l0TUEyyDozg2doBsnDzJdCFzcHZjo4fClYfZu/Ficwb9eEDOx85eif+rGEOclO
 ickwuGEOAjKuyrz4T0fkd6j3aMYUVRmXZ3L0gFD68jUKel00zjSpcL/JfEihwvd/
 Nus3MYLH+IrFKQ==
 =ZaxL
 -----END PGP SIGNATURE-----

Merge tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v4.14-rc1

This contains a couple of fixes and improvements for host1x, with some
preparatory work for Tegra186 support.

The remainder is cleanup and minor bugfixes for Tegra DRM along with
enhancements to debuggability.

There have also been some enhancements to the kernel interfaces for
host1x job submissions and support for mmap'ing PRIME buffers directly,
all of which get the interfaces very close to ready for serious work.

* tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux: (21 commits)
  drm/tegra: Prevent BOs from being freed during job submission
  drm/tegra: gem: Implement mmap() for PRIME buffers
  drm/tegra: Support render node
  drm/tegra: sor: Trace register accesses
  drm/tegra: dpaux: Trace register accesses
  drm/tegra: dsi: Trace register accesses
  drm/tegra: hdmi: Trace register accesses
  drm/tegra: dc: Trace register accesses
  drm/tegra: sor: Use unsigned int for register offsets
  drm/tegra: hdmi: Use unsigned int for register offsets
  drm/tegra: dsi: Use unsigned int for register offsets
  drm/tegra: dpaux: Use unsigned int for register offsets
  drm/tegra: dc: Use unsigned int for register offsets
  drm/tegra: Fix NULL deref in debugfs/iova
  drm/tegra: switch to drm_*_get(), drm_*_put() helpers
  drm/tegra: Set MODULE_FIRMWARE for the VIC
  drm/tegra: Add CONFIG_OF dependency
  gpu: host1x: Support sub-devices recursively
  gpu: host1x: fix error return code in host1x_probe()
  gpu: host1x: Fix bitshift/mask multipliers
  ...
2017-08-21 17:37:33 +10:00
Arnd Bergmann
2e9a41dca3 Allwinner driver changes for 4.14
Usual driver changes:
 
   - SUNXI_RSB bus driver enabled by default for ARM64
 
   - Support for SRAM controller and SRAM C block on the A64 added
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAlmXuVkOHHdlbnNAY3Np
 ZS5vcmcACgkQOJpUIZwPJDABghAAynR1zup2Fk1O3vC/49/oqojoFDoMar9ZOEpe
 Aw/kMphhVUSyedVpNjef1bfu2TYfXxl/bD56T3oQbNLIHM7A7sW2Ay/blt+5/tOz
 v0QiCY+y3nGpP49TOp6NSgoFb8H75xh09HDzey+ETWA34NV8ywz7dCry1XJ4Taln
 IIULlsWJJkfefJB0fcWULG/omGArqM9SiZnXnwPaf+3D1wZTFh3X/vjkVq5tewOf
 To/kLZNE4C5mubcXqurDRNiomzQpnbGD54ZYfnK+F1W/PdJoOrwsMRwEAGe0+zOI
 wehMKvd2cOgt1lnLt5fsEESNGr8T/5gdPB1JNP437+DP1uou0KBdmZKTwTx0eYI/
 YADxSqGVVpF9UVrMYDGK2sBTfhcKFCo8I6Xw9yfLraVY4Gs3uzAAe2MtDgTYITrO
 H3jHsmt6bqDrWgYDG3kzbFvKDyn5+uB6UgZ67Reg5eP+XcubAj7UEQEu8oliRz1V
 qOu4YbO0tkqnYCeotq3yEGEVbSr9KQ+M2MUR/5pdyRgjqg7ZueppmDh9DqD9Ene+
 v/hiI4M+TpdpOLuywYsctDRYWEjnUSeIrxy3HJSRXqH+LMzhxm9KL2jHQy6EcICv
 ALaGhyEtnstDrI61hgG/di/jq7TjL8LHL9lubxrbt8Eiq+52hJy5EmPexq5YQM/1
 raOLKkQ=
 =i+D6
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-drivers-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers

Pull "Allwinner driver changes for 4.14" from Chen-Yu Tsai:

Usual driver changes:

  - SUNXI_RSB bus driver enabled by default for ARM64

  - Support for SRAM controller and SRAM C block on the A64 added

* tag 'sunxi-drivers-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  drivers: soc: sunxi: add support for A64 and its SRAM C
  drivers: soc: sunxi: add support for remapping func value to reg value
  drivers: soc: sunxi: fix error processing on base address when claiming
  dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
  bus: sunxi-rsb: Enable by default for ARM64
2017-08-21 09:25:22 +02:00
Arvind Yadav
516fa8d0e1 macintosh/rack-meter: Make of_device_ids const
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
    407	    576	      0	    983	    3d7	drivers/macintosh/rack-meter.o

File size after constify rackmeter_match.
   text	   data	    bss	    dec	    hex	filename
    807	    176	      0	    983	    3d7	drivers/macintosh/rack-meter.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-21 17:21:34 +10:00
Keerthy
4459398b6d soc: ti: knav: Add a NULL pointer check for kdev in knav_pool_create
knav_pool_create is an exported function. In the event of a call
before knav_queue_probe, we encounter a NULL pointer dereference
in the following line. Hence return -EPROBE_DEFER to the caller till
the kdev pointer is non-NULL.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-21 09:19:50 +02:00
Dave Airlie
e5fa05b96b Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next
this cycle has been fairly calm in etnaviv land with most of the action
happening on the userspace side.

Notable changes:
- Improvements to CONFIG option handling to make it harder for users to
shoot themselves in the foot due to kernel misconfiguration.
- Tweaked GEM object population, so that userspace can take considerate
action when memory allocation fails, rather than waking the raging OOM
killer beast.

* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: switch GEM allocations to __GFP_RETRY_MAYFAIL
  drm/etnaviv: don't fail GPU bind when CONFIG_THERMAL isn't enabled
  drm/etnaviv: switch to drm_*{get,put} helpers
  drm/etnaviv: select CMA and DMA_CMA if available
  drm/etnaviv: populate GEM objects on cpu_prep
  drm/etnaviv: reduce allocation failure message severity
  drm/etnaviv: don't trigger OOM killer when page allocation fails
2017-08-21 14:34:15 +10:00
Rick Farrington
0c45d7fe12 liquidio: fix use of pf in pass-through mode in a virtual machine
Fix problem when PF is used in pass-through mode in a VM (w/embedded f/w).

If host error reading PF num from CN23XX_PCIE_SRIOV_FDL reg,
try to retrieve PF num from SLI_PKT(0)_INPUT_CONTROL (initialized by f/w).

Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20 20:21:32 -07:00
Bhumika Goyal
6eb15e2130 net: dsa: mv88e6xxx: make irq_chip const
Make this const as it is only used in a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20 20:02:29 -07:00
Christophe Jaillet
138b57f0f8 net: ibm: emac: Fix some error handling path in 'emac_probe()'
If 'irq_of_parse_and_map()' or 'of_address_to_resource()' fail, 'err' is
known to be 0 at this point.
So return -ENODEV instead in the first case and use 'of_iomap()' instead of
the equivalent 'of_address_to_resource()/ioremap()' combinaison in the 2nd
case.

Doing so, the 'rsrc_regs' field of the 'emac_instance struct' becomes
redundant and is removed.

While at it, turn a 'err != 0' test into an equivalent 'err' to be more
consistent.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20 19:53:08 -07:00
Ganesh Goudar
c3168cabe1 cxgb4/cxgbvf: Handle 32-bit fw port capabilities
Implement new 32-bit Firmware Port Capabilities in order to
handle new speeds which couldn't be represented in the old 16-bit
Firmware Port Capabilities values.

Based on the original work of Casey Leedom <leedom@chelsio.com>

Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20 19:51:18 -07:00
Dave Airlie
a0aeb3b2ac Merge tag 'drm-amdkfd-next-2017-08-18' of git://people.freedesktop.org/~gabbayo/linux into drm-next
This is the amdkfd pull request for 4.14 merge window.
AMD has started cleaning the pipe and sending patches from their internal
development to the upstream community.

The plan as I understand it is to first get all the non-dGPU patches to
upstream and then move to upstream dGPU support.

The patches here are relevant only for Kaveri and Carrizo.

The following is a summary of the changes:
- Add new IOCTL to set a Scratch memory VA
- Update PM4 headers for new firmware that support scratch memory
- Support image tiling mode
- Remove all uses of BUG_ON
- Various Bug fixes and coding style fixes

* tag 'drm-amdkfd-next-2017-08-18' of git://people.freedesktop.org/~gabbayo/linux: (24 commits)
  drm/amdkfd: Implement image tiling mode support v2
  drm/amdgpu: Add kgd kfd interface get_tile_config() v2
  drm/amdkfd: Adding new IOCTL for scratch memory v2
  drm/amdgpu: Add kgd/kfd interface to support scratch memory v2
  drm/amdgpu: Program SH_STATIC_MEM_CONFIG globally, not per-VMID
  drm/amd: Update MEC HQD loading code for KFD
  drm/amdgpu: Disable GFX PG on CZ
  drm/amdkfd: Update PM4 packet headers
  drm/amdkfd: Clamp EOP queue size correctly on Gfx8
  drm/amdkfd: Add more error printing to help bringup v2
  drm/amdkfd: Handle remaining BUG_ONs more gracefully v2
  drm/amdkfd: Allocate gtt_sa_bitmap in long units
  drm/amdkfd: Fix doorbell initialization and finalization
  drm/amdkfd: Remove BUG_ONs for NULL pointer arguments
  drm/amdkfd: Remove usage of alloc(sizeof(struct...
  drm/amdkfd: Fix goto usage v2
  drm/amdkfd: Change x==NULL/false references to !x
  drm/amdkfd: Consolidate and clean up log commands
  drm/amdkfd: Clean up KFD style errors and warnings v2
  drm/amdgpu: Remove hard-coded assumptions about compute pipes
  ...
2017-08-21 10:49:48 +10:00
Arnd Bergmann
8c97023cf0 Kbuild: use -fshort-wchar globally
Commit 971a69db7d ("Xen: don't warn about 2-byte wchar_t in efi")
added the --no-wchar-size-warning to the Makefile to avoid this
harmless warning:

arm-linux-gnueabi-ld: warning: drivers/xen/efi.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail

Changing kbuild to use thin archives instead of recursive linking
unfortunately brings the same warning back during the final link.

The kernel does not use wchar_t string literals at this point, and
xen does not use wchar_t at all (only efi_char16_t), so the flag
has no effect, but as pointed out by Jan Beulich, adding a wchar_t
string literal would be bad here.

Since wchar_t is always defined as u16, independent of the toolchain
default, always passing -fshort-wchar is correct and lets us
remove the Xen specific hack along with fixing the warning.

Link: https://patchwork.kernel.org/patch/9275217/
Fixes: 971a69db7d ("Xen: don't warn about 2-byte wchar_t in efi")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-21 09:05:59 +09:00
Rafael J. Wysocki
57ccaf3384 Merge back intel_pstate material for v4.14. 2017-08-21 01:50:20 +02:00
Dave Airlie
5fd27c2a1f Allwinner DRM changes for 4.14
A few changes, but most notably improving the HDMI support merged in 4.13,
 by reporting the DDC adapter as an i2c bus, and by adding CEC support
 through the CEC framework.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZl0SwAAoJEBx+YmzsjxAg4gkP/Rsyxww/f3+wX2COAc3uS0U9
 +COEsvf0ztrVIP9xAIf+m29UxB9u6dP2KTKANFyAf4b42coW6fUimV4iQmdDKAxY
 Y/BNUV8SyDidFmxUo7Cy3uVFzA61+wsMPOXMpJA5uQa/eNpsbHEQhsZWEsYLymZF
 WV7h+Hepm+pVPTnbM1j5Pd2J+VISGBdacnXFjW2KzA+PdPoPT1fmKIQ39/OtPQzH
 RV1J4HPEVWZfZIJz9i2NK3J7GhRR5u9NnzfGZfWf0SHzujURuytJwgIvEm5dgLeD
 +XuUsCvVzkUB4jTY+T1qmVPQ+GcazyinKIu6ZU9pP1xkc+Apu79OapOdvmx95yIV
 l9l4Q0BuJvuWsZTP8lT4EMO7oyRE0oDleKgHQ6BbnqwTKY9pltEp4Wl7ovPibXje
 YjjierdO8WxUq8NhSW50S/EAu2oopbCp0YApdQVmMDlZ4bx41GWDmLlCaDsECakQ
 vQLtI5eQK1EbrQcJjioemdikt+xcrZ7+J35x1qLQ9aNwa49RI5WSIzOTxsqWHZYw
 6wXv/HN6atPbRspnwgRlwtVYUOoSZ1xT+lST0rizRLJW4G8srzfPpjtXLaP8zWp+
 IvJ+ntbn1O9CSBz70IovX/AnrWxMK3Guf1dFWE68JfSw/fxhUpF1RpHdi+yvZJpS
 xgedqXmmlYAMNlro9Ikg
 =6GJs
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next

Allwinner DRM changes for 4.14

A few changes, but most notably improving the HDMI support merged in 4.13,
by reporting the DDC adapter as an i2c bus, and by adding CEC support
through the CEC framework.

* tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  sun4i_hdmi: add CEC support
  dt-bindings: display: sunxi: Improve endpoint ID scheme readability
  drm/sun4i: tcon: remove unused function
  drm/sun4i: Remove useless atomic_check
  drm/sun4i: Add if statement instead of depends on
  drm/sun4i: hdmi: Implement I2C adapter for A10s DDC bus
  drm/sun4i: constify drm_plane_helper_funcs
2017-08-21 09:05:01 +10:00
Bartosz Golaszewski
b4c495f03a gpio: mockup: use irq_sim
Shrink the driver by removing the code dealing with dummy interrupts
and replacing it with calls to the irq_sim API.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-21 00:12:30 +02:00
Bartosz Golaszewski
5751d3dcf4 gpio: mxs: use devres for irq generic chip
Use resource managed variants of irq_alloc_generic_chip() and
irq_setup_generic_chip().

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-21 00:10:00 +02:00
Bartosz Golaszewski
db5270acaa gpio: mxc: use devres for irq generic chip
Use resource managed variants of irq_alloc_generic_chip() and
irq_setup_generic_chip().

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-21 00:09:33 +02:00
Bartosz Golaszewski
e0fc5a1b8e gpio: pch: use devres for irq generic chip
Use resource managed variants of irq_alloc_generic_chip() and
irq_setup_generic_chip().

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-21 00:08:52 +02:00
Bartosz Golaszewski
469d59430f gpio: ml-ioh: use devres for irq generic chip
Use resource managed variants of irq_alloc_generic_chip() and
irq_setup_generic_chip().

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-21 00:06:35 +02:00
Bartosz Golaszewski
624b5a9c0b gpio: sta2x11: use devres for irq generic chip
Use resource managed variants of irq_alloc_generic_chip() and
irq_setup_generic_chip().

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-21 00:06:04 +02:00
Bartosz Golaszewski
a6f5f1b956 gpio: sta2x11: disallow unbinding the driver
This driver is non-modular so explicitly disallow a driver unbind.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-21 00:05:37 +02:00
Bartosz Golaszewski
60909ec93b gpio: mxs: disallow unbinding the driver
This driver is non-modular so explicitly disallow a driver unbind.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-21 00:05:08 +02:00
Bartosz Golaszewski
90e1fc4c4c gpio: mxc: disallow unbinding the driver
This driver is non-modular so explicitly disallow a driver unbind.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-21 00:04:39 +02:00
Dave Airlie
f30b8eaa2c Merge branch 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux into drm-next
More changes for 4.14.  Highlights:
- command submission overhead improvements
- Huge page support for vega10
- physical mode support for mjpeg for asics that don't support UVD vm
- improve ttm_mem_type_manager_func debug
- misc ttm fixes, cleanups
- misc gpuvm cleanups

* 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (26 commits)
  drm/ttm: use reservation_object_trylock in ttm_bo_individualize_resv v2
  drm/amdgpu: fix vega10 graphic hang issue in S3 test
  drm/amdgpu: bump version for support of UVD MJPEG decode
  drm/amdgpu: add MJPEG check for UVD physical mode msg buffer
  drm/ttm: Fix accounting error when fail to get pages for pool
  drm/amd/amdgpu: expose fragment size as module parameter (v2)
  drm/amd/amdgpu: store fragment_size in vm_manager
  drm/amdgpu: rename VM invalidated to moved
  drm/amdgpu: separate bo_va structure
  drm/amdgpu: drop the extra VM huge page flag v2
  drm/amdgpu: remove superflous amdgpu_bo_kmap in the VM
  drm/amdgpu: cleanup static CSA handling
  drm/amdgpu: SHADOW and VRAM_CONTIGUOUS flags shouldn't be used by userspace
  drm/amdgpu: save list length when fence is signaled
  drm/amdgpu: move vram usage tracking into the vram manager v2
  drm/amdgpu: move gtt usage tracking into the gtt manager v2
  drm/amdgpu: move debug print into the MM managers
  drm/amdgpu: fix incorrect use of the lru_lock
  drm/radeon: fix incorrect use of the lru_lock
  drm/ttm: make ttm_mem_type_manager_func debug more useful
  ...
2017-08-21 06:22:17 +10:00
Christophe JAILLET
f00c2987bf ieee802154: ca8210: Fix a potential NULL pointer dereference
'spi' is known to be NULL, so we dereference a NULL pointer here.
Use 'pr_crit()' instead of 'dev_crit()' to report the message.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-08-20 20:51:30 +02:00
Larry Finger
a575de2da5 staging: rtlwifi: Reviewers fixes
This commit adds the TODO file and implements some reviewers comments
made against some patches to the wireless tree.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:13:12 -07:00
Larry Finger
5b5ab4cb5c staging: r8822be: Add Makefiles and Kconfig for new driver
The RTL8822BE, an 802.11ac wireless network card, is now appearing in
new computers. Its driver is being placed in staging to reduce the time
that users of this new card will have access to in-kernel drivers.

This commit enables building of the new driver. For this version, all
routines are built into a single module r8822be. When this driver is
moved to the wireless tree, halmac, phydm, and rtl8822be will become
new modules.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:13:12 -07:00
Ping-Ke Shih
7e5b796cde staging: r8822be: Add the driver code
The RTL8822BE, an 802.11ac wireless network card, is now appearing in
new computers. Its driver is being placed in staging to reduce the time
that users of this new card will have access to in-kernel drivers.

This commit adds the code for the new r8822be driver.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:13:12 -07:00
Ping-Ke Shih
9ce99b04b5 staging: r8822be: Add phydm mini driver
The RTL8822BE, an 802.11ac wireless network card, is now appearing in
new computers. Its driver is being placed in staging to reduce the time
that users of this new card will have access to in-kernel drivers.

New Realtek wireless devices have a new method for PHY control and
dynamic management. The RTL8822BE is the first of these devices, thus
there is additional code required.

In the final version, this code will be a separate module; however,
it is combined with the r8822be driver to minimize the interference
with the drivers in the wireless tree.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:13:12 -07:00
Ping-Ke Shih
938a0447f0 staging: r8822be: Add code for halmac sub-driver
The RTL8822BE, an 802.11ac wireless network card, is now appearing in
new computers. Its driver is being placed in staging to reduce the time
that users of this new card will have access to in-kernel drivers.

New Realtek devices implement a common sub-driver to control the MAC
layer. The RTL8822BE is the first of these devices, thus its introduction
involves some extra code. In the wireless tree, this will be a separate
module; however, it is compiled into the 8822be driver here.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:13:12 -07:00
Ping-Ke Shih
b53b764b27 staging: r8822be: Add r8822be btcoexist routines to staging
The RTL8822BE, an 802.11ac wireless network card, is now appearing in
new computers. Its driver is being placed in staging to reduce the time
that users of this new card will have access to in-kernel drivers.

This commit adds the routines needed for BT coexistence with the
new driver.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:13:12 -07:00
Larry Finger
fbdc6ba8ee staging: r8822be: Copy existing btcoexist code into staging
The RTL8822BE, an 802.11ac wireless network card, is now appearing in
new computers. Its driver is being placed in staging to reduce the time
that users of this new card will have access to in-kernel drivers.

This commit copies the existing routines from .../rtlwifi/btcoexist/
into staging. There are no changes other than removing all EXPORT
statements, and the fixing of checkpatch messages. The latter will
be backported to the wireless tree.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:13:12 -07:00
Ping-Ke Shih
56bde84630 staging: r8822be: Add existing rtlwifi and rtl_pci parts for new driver
The RTL8822BE, an 802.11ac wireless network card, is now appearing in
new computers. Its driver is being placed in staging to reduce the time
that users of this new card will have access to in-kernel drivers.

This commit copies the code that currently constitutes the rtlwifi and
rtl_pci mini drivers. This material is copied into staging to prevent
any undo interaction between the existing drivers and this new one.
The only changes in this code are the removal of all export statements,
and the fixing of some checkpatch messages. The latter will be backported
into the wireless tree.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:13:11 -07:00
Alex Briskin
bf334c024f staging: wlan-ng: hfa384x_usb: Fix multiple line dereference
Refactor code to be more readable and eliminate the checkpatch
warning

Signed-off-by: Alex Briskin <br.shurik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:10:23 -07:00
Srishti Sharma
2c5b7943a9 Staging: greybus: vibrator.c: Fixed alignment to match open parenthesis.
Fixed alignment so that it matched open parenthesis

Signed-off-by: Srishti Sharma <srishtishar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:08:41 -07:00
Bhumika Goyal
afd37dfa43 staging: greybus: make device_type const
Make this const as it is only stored in the type field of a device
structure, which is const.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:08:41 -07:00
Colin Ian King
34ff1bf492 staging/rts5208: fix incorrect shift to extract upper nybble
The mask of sns_key_info1 suggests the upper nybble is being extracted
however the following shift of 8 bits is too large and always results in
0.  Fix this by shifting only by 4 bits to correctly get the upper nybble.

Detected by CoverityScan, CID#142891 ("Operands don't affect result")

Fixes: fa590c222f ("staging: rts5208: add support for rts5208 and rts5288")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:08:41 -07:00
Xiangyang Zhang
6feb5c82de staging: pi433: fixed coding style issues
space required before the open parenthesis, open brace should be
on previous line.

Signed-off-by: Xiangyang Zhang <xyz.sun.ok@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:08:41 -07:00
Jamie Huang
08f7c8bbeb staging:rtl8188eu: fix coding style issue
checkpatch.pl gave
ERROR: open brace '{' following function definitions go on the next line.

Signed-off-by: Jamie Huang <jamienstar@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:08:41 -07:00
Dan Carpenter
0c1b9970dd staging: lustre: lustre: Off by two in lmv_fid2path()
We want to concatonate join string one, a '/' character, string two and
then a NUL terminator.  The destination buffer holds ori_gf->gf_pathlen
characters.  The strlen() function returns the number of characters not
counting the NUL terminator.  So we should be adding two extra spaces,
one for the foward slash and one for the NUL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: frank zago <fzago@cray.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-20 11:08:41 -07:00
Greg Kroah-Hartman
2c68888f1d Second set of IIO fixes for the 4.13 cycle.
Given the late stage of this series, some more involved fixes have been
 held back for the upcoming merge window.
 
 The hid-sensor issue has been causing problems for a long time so it
 is great to have that one finally fixed!  No more bug reports for the
 userspace guys (well about that anyway).
 
 * documentation
   - some warning fixes due to missing colons in kernel-doc.
 * adis16480
   - fix accel scale factor.
 * bmp280
   - properly initialize the device for humidity readings - without this
   the humidity readings may be skipped and a magic value of 0x8000 returned.
 * hid-sensor-strigger
   - fix a race with user space when powering up the sensor.
 * ina291
   - Avoid an underflow for the sleeping time as a result of supporting the
   fastest rates.
 * st-magnetometer
   - Fix the status register address for hte LSM303AGR,
   - Remove the ihl property for LSM303AGR as the sensor doesn't support
   active low for the dataready line.
 * stm32-adc
   - Fix use of a common clock rate.
 * stm32-timer
   - fix the quadrature mode get routine to account for the magic 0 value.
   set on boot.
   - fix the return value of write_raw,
   - fix the get/set down count direction as the enum value was not being
   converted to the relevant bit field,
   - add an enable attribute to actually turn it on when in encoder mode,
   - missing mask when reading the trigger mode.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlmZnXoRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foj5nA/+J/CB6E6lOiWXplGVgDJWNOgTAE5zS27Z
 mwbUpI6kgGOS42+BJTtfQM9JvdZ8nLl4cR7oJ4v2LWXUV0p5WhKVx3EvKFcMazKj
 FZvEZLx0fBvCg7N7u5+v3dWEHuh3DkLBl36J13oxDM0v0oxHVbg+RFfous9t1kCK
 faV+nQeGBy51TBw7qasAaKV3FGqFmftRhYzNoG40yH0gzcu/YWRL47rotwwQryMj
 XLJg9AZ4w2XQmUgNXGjdTtphDT99sRWxi6zQCtlGQitm2E+4Oc2l7xg4tDpudqzY
 oPo64BVF2UcZO7KL0KBAhvhmxFOXtmayPDLknfqzScLEYGV7AZUkwMiNBY2x3H+d
 pkyLx1wKZd2HX2yNDM9K9We1vuAt/845Unx8iX2cUMzx89n99ODlGvE0R/7IpnJd
 YezXwoDqwUZYzysyZb6weFXdhNCSyYRFnGXw9axvA/3c2vgxVBZd4Q9BnAZ0J2xy
 gtbrosvMD6U713N+CA6V8ccz46UNHr4pZK65qiUfCMam+zs1JUkmrUJtnuPwPfJA
 A1SK55VzrWqq1LVA6qBvbRpx19Ylh1oFJtwsFCPIE85kZCpmop/LOPia4PXeXePr
 HOrNJNT+c6bv6aHyEL8CePqyWcoLL+TLoDET6XzEN0/eQI327jtW1EjTX/Utbw1J
 8iyLXx7CgDo=
 =1ota
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-4.13b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second set of IIO fixes for the 4.13 cycle.

Given the late stage of this series, some more involved fixes have been
held back for the upcoming merge window.

The hid-sensor issue has been causing problems for a long time so it
is great to have that one finally fixed!  No more bug reports for the
userspace guys (well about that anyway).

* documentation
  - some warning fixes due to missing colons in kernel-doc.
* adis16480
  - fix accel scale factor.
* bmp280
  - properly initialize the device for humidity readings - without this
  the humidity readings may be skipped and a magic value of 0x8000 returned.
* hid-sensor-strigger
  - fix a race with user space when powering up the sensor.
* ina291
  - Avoid an underflow for the sleeping time as a result of supporting the
  fastest rates.
* st-magnetometer
  - Fix the status register address for hte LSM303AGR,
  - Remove the ihl property for LSM303AGR as the sensor doesn't support
  active low for the dataready line.
* stm32-adc
  - Fix use of a common clock rate.
* stm32-timer
  - fix the quadrature mode get routine to account for the magic 0 value.
  set on boot.
  - fix the return value of write_raw,
  - fix the get/set down count direction as the enum value was not being
  converted to the relevant bit field,
  - add an enable attribute to actually turn it on when in encoder mode,
  - missing mask when reading the trigger mode.
2017-08-20 10:45:54 -07:00
Greg Kroah-Hartman
5e47adb906 Second set of IIO new device support, features and cleanup for the 4.14 cycle.
New device support:
 * ak8974
   - support the AMI306.
 * st_magnetometer
   - add support for the LIS2MDL with bindings.
 * rockchip-saradc
   - add binding for rv1108 SoC (no driver change).
 * srf08
   - add srf02 (i2c only) and srf10 support.
 * stm32-timer
   - support for the STM32H7 to existing driver.
 
 Features:
 * tools
   - move over to the tools buildsystem rather than hand rolling.
   - add an install section to the build.
 * ak8974
   - use serial number to add device randomness.
   - add AMI306 calibration data output.
 * ccs811
   - triggered buffer support.
 * srf08
   - add a device tree table as the old style i2c probing is going away,
   - add triggered buffer support
 * st32-adc
   - add optional st,min-sample-time-nsecs binding to allow control of
     sampling against analog circuitry.
 * stm32-timer
   - add output compare triggers.
 * ti-ads1015
   - add threshold event support.
 * ti-ads7950
   - Allow use on ACPI platforms including providing a default reference
     voltage as there is no way to obtain this on ACPI currently.
 
 Cleanup and fixes:
 * ad7606
   - fix an error return code in probe.
 * ads1015
   - fix incorrect data rate setting update when capture in progress,
   - fix wrong scale information for the ADS1115,
   - make conversions work when CONFIG_PM is not set,
   - make sure we don't get a stale result after a runtime resume by
     ensuring we wait long enough,
   - avoid returning a false error form the buffer setup callbacks,
   - add enough wait time to get the correct conversion,
   - remove an unnecessary config register update,
   - add a helper to set conversion mode reducing repeated boilerplate,
   - use devm_iio_triggered_buffer_setup to simplify error and remove
     paths,
   - use iio_device_claim_direct_mode instead of opencoding the same.
 * ak8974
   - mark the INT_CLEAR register as precious to prevent debugfs access.
 * apds9300
   - constify the i2c_device_id.
 * at91-sama5 adc
   - add missing Kconfig dependency.
 * bma180 accel
   - constify the i2c_device_id.
 * rockchip_saradc
   - explicitly request exclusive reset control as part of the reset rework
     on going throughout the kernel.
 * st_accel
   - fix drdy configuration for a load of accelerometers that only have
     the int1 line.  Fix is unimportant as presumably no deviec tree actually
     used the non existent hardware line.
 * st_pressure
   - fix drdy configuration for LPS22HB and LPS25H by dropping int2 support
     as they don't have this. Fix is unimportant as presumably no device tree
     actually used the non existent hardware line.
 * stm32-dac
   - explicitly request exclusive reset control (part of reset being reworked).
 * tsl2583
   - constify the i2c_device_id.
 * xadc
   - coding style fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlmZpCcRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FohlmQ/6A9FAI0wPGeEQCXDiLtIAWI1/DByYsHDk
 P3U6sFS17y56KAQcLS34HVR5lLreHya3hsUmPl4gCsjXZsGWAinyXy74BNtBbPmx
 LtzVsyLdjBP3Nxl/OGgNWG+kiq7Op+uw0/OZohtEqzurG0142S6CVvxteFlmhQNH
 pLlmPGnwk6Z4GsasHma/f2FkDD8oRVgvQSP7dJ9HIwq49qQ76cT/+20X1xODHLGw
 qpXfQiLUFW8E1JBTDDcXZD3M23TWG4DZcVlNnWf8fja/bk4WaLBKqVrI9gGZpZsQ
 xXfrSDRwc216w6tzVWjsNV/M0ZuSdm/VCBeyQa17XQVNelkO4dVrCqFMLCh5i/t5
 p4qhhV9mrbweIgDj++6c+4qMzWSAznWybAKMMlcucmwxHKefcrlgUniE03OzyPpG
 gpMS94enlVW8WpE/iYkxb/d6EqTM9CH2CJH6W4Ve/Xr4aQHkF5/P23k+nsW113of
 T1q1SCKegV9p7hIzqDqDmOQC7iNTcBcu+/7RYtkDn9jmmhiQAxwoPJZunkR1cxD8
 hA04x5W9HuPFdbNRlH1MozClbyRUtk0L/XLTKwA9T0VyRUKV1P6Szcp9wYRw+6G8
 QiA5NNrNPf17L6slLZ06N1auu6vO7BhTmYNKnd6VBO+vi7kF/FM2UdZGHof4WT/4
 zPE/BO8IwTk=
 =b6g8
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support, features and cleanup for the 4.14 cycle.

New device support:
* ak8974
  - support the AMI306.
* st_magnetometer
  - add support for the LIS2MDL with bindings.
* rockchip-saradc
  - add binding for rv1108 SoC (no driver change).
* srf08
  - add srf02 (i2c only) and srf10 support.
* stm32-timer
  - support for the STM32H7 to existing driver.

Features:
* tools
  - move over to the tools buildsystem rather than hand rolling.
  - add an install section to the build.
* ak8974
  - use serial number to add device randomness.
  - add AMI306 calibration data output.
* ccs811
  - triggered buffer support.
* srf08
  - add a device tree table as the old style i2c probing is going away,
  - add triggered buffer support
* st32-adc
  - add optional st,min-sample-time-nsecs binding to allow control of
    sampling against analog circuitry.
* stm32-timer
  - add output compare triggers.
* ti-ads1015
  - add threshold event support.
* ti-ads7950
  - Allow use on ACPI platforms including providing a default reference
    voltage as there is no way to obtain this on ACPI currently.

Cleanup and fixes:
* ad7606
  - fix an error return code in probe.
* ads1015
  - fix incorrect data rate setting update when capture in progress,
  - fix wrong scale information for the ADS1115,
  - make conversions work when CONFIG_PM is not set,
  - make sure we don't get a stale result after a runtime resume by
    ensuring we wait long enough,
  - avoid returning a false error form the buffer setup callbacks,
  - add enough wait time to get the correct conversion,
  - remove an unnecessary config register update,
  - add a helper to set conversion mode reducing repeated boilerplate,
  - use devm_iio_triggered_buffer_setup to simplify error and remove
    paths,
  - use iio_device_claim_direct_mode instead of opencoding the same.
* ak8974
  - mark the INT_CLEAR register as precious to prevent debugfs access.
* apds9300
  - constify the i2c_device_id.
* at91-sama5 adc
  - add missing Kconfig dependency.
* bma180 accel
  - constify the i2c_device_id.
* rockchip_saradc
  - explicitly request exclusive reset control as part of the reset rework
    on going throughout the kernel.
* st_accel
  - fix drdy configuration for a load of accelerometers that only have
    the int1 line.  Fix is unimportant as presumably no deviec tree actually
    used the non existent hardware line.
* st_pressure
  - fix drdy configuration for LPS22HB and LPS25H by dropping int2 support
    as they don't have this. Fix is unimportant as presumably no device tree
    actually used the non existent hardware line.
* stm32-dac
  - explicitly request exclusive reset control (part of reset being reworked).
* tsl2583
  - constify the i2c_device_id.
* xadc
  - coding style fixes.
2017-08-20 10:42:42 -07:00
Linus Torvalds
2615a38f14 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
 "A few small fixes for timer drivers:

   - Prevent infinite recursion in the arm architected timer driver with
     ftrace

   - Propagate error codes to the caller in case of failure in EM STI
     driver

   - Adjust a bogus loop iteration in the arm architected timer driver

   - Add a missing Kconfig dependency to the pistachio clocksource to
     prevent build failures

   - Correctly check for IS_ERR() instead of NULL in the shared timer-of
     code"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/arm_arch_timer: Avoid infinite recursion when ftrace is enabled
  clocksource/drivers/Kconfig: Fix CLKSRC_PISTACHIO dependencies
  clocksource/drivers/timer-of: Checking for IS_ERR() instead of NULL
  clocksource/drivers/em_sti: Fix error return codes in em_sti_probe()
  clocksource/drivers/arm_arch_timer: Fix mem frame loop initialization
2017-08-20 09:34:24 -07:00
Hans de Goede
d912366a59 Input: soc_button_array - silence -ENOENT error on Dell XPS13 9365
The Dell XPS13 9365 has an INT33D2 ACPI node with no GPIOs, causing
the following error in dmesg:

[    7.172275] soc_button_array: probe of INT33D2:00 failed with error -2

This commit silences this, by returning -ENODEV when there are no GPIOs.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=196679
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-20 09:30:23 -07:00
Linus Torvalds
9dae41a238 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
 "A pile of smallish changes all over the place:

   - Add a missing ISB in the GIC V1 driver

   - Remove an ACPI version check in the GIC V3 ITS driver

   - Add the missing irq_pm_shutdown function for BRCMSTB-L2 to avoid
     spurious wakeups

   - Remove the artifical limitation of ITS instances to the number of
     NUMA nodes which prevents utilizing the ITS hardware correctly

   - Prevent a infinite parsing loop in the GIC-V3 ITS/MSI code

   - Honour the force affinity argument in the GIC-V3 driver which is
     required to make perf work correctly

   - Correctly report allocation failures in GIC-V2/V3 to avoid using
     half allocated and initialized interrupts.

   - Fixup checks against nr_cpu_ids in the generic IPI code"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/ipi: Fixup checks against nr_cpu_ids
  genirq: Restore trigger settings in irq_modify_status()
  MAINTAINERS: Remove Jason Cooper's irqchip git tree
  irqchip/gic-v3-its-platform-msi: Fix msi-parent parsing loop
  irqchip/gic-v3-its: Allow GIC ITS number more than MAX_NUMNODES
  irqchip: brcmstb-l2: Define an irq_pm_shutdown function
  irqchip/gic: Ensure we have an ISB between ack and ->handle_irq
  irqchip/gic-v3-its: Remove ACPICA version check for ACPI NUMA
  irqchip/gic-v3: Honor forced affinity setting
  irqchip/gic-v3: Report failures in gic_irq_domain_alloc
  irqchip/gic-v2: Report failures in gic_irq_domain_alloc
  irqchip/atmel-aic: Remove root argument from ->fixup() prototype
  irqchip/atmel-aic: Fix unbalanced refcount in aic_common_rtc_irq_fixup()
  irqchip/atmel-aic: Fix unbalanced of_node_put() in aic_common_irq_fixup()
2017-08-20 09:07:56 -07:00
Philipp Zabel
87587016f6 iio: adc: rockchip_saradc: explicitly request exclusive reset control
Commit a53e35db70 ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.

No functional changes.

Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-iio@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-20 15:41:18 +01:00
Philipp Zabel
a1b509dfc1 iio: dac: stm32-dac-core: explicitly request exclusive reset control
Commit a53e35db70 ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.

No functional changes.

Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-20 15:41:18 +01:00
Akinobu Mita
d9f39babd8 iio: adc: ti-ads1015: add threshold event support
The ADS1015 device provides programmable comparator that can issue an
interrupt on the ALERT pin.  This change adds the iio threshold event
support for that feature.

The ADS1015 device only have a single config register which contains an
input multiplexer selection, comparator settings, and etc.  So only a
single event channel can be enabled at a time.  Also enabling both buffer
and event are prohibited for simplicity.

Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-20 15:41:17 +01:00
Akinobu Mita
47d8cf41d5 iio: adc: ti-ads1015: use iio_device_claim_direct_mode()
While the iio buffer for the ti-ads1015 driver is enabled, reading the
raw ADC channel data is restricted.  We usually use the
iio_device_claim_direct_mode()/iio_device_release_direct_mode() pair for
that.

This change consequently reverses the locking order for the driver's
private lock and indio_dev->mlock which acquired by
iio_device_claim_direct_mode() internally. But it's safe because there is
no other dependency between these locks.

Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-20 15:41:17 +01:00