Commit graph

49,973 commits

Author SHA1 Message Date
Josef Bacik
9dba8cf128 Btrfs: make sure we wait on logged extents when fsycning two subvols
If we have two fsync()'s race on different subvols one will do all of its work
to get into the log_tree, wait on it's outstanding IO, and then allow the
log_tree to finish it's commit.  The problem is we were just free'ing that
subvols logged extents instead of waiting on them, so whoever lost the race
wouldn't really have their data on disk.  Fix this by waiting properly instead
of freeing the logged extents.  Thanks,

cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:20:10 -08:00
David Sterba
0d95c1bec9 btrfs: fix wrong accounting of raid1 data profile in statfs
The sizes that are obtained from space infos are in raw units and have
to be adjusted according to the raid factor. This was missing for
f_bavail and df reported doubled size for raid1.

Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Fixes: ba7b6e62f4 ("btrfs: adjust statfs calculations according to raid profiles")
CC: stable@vger.kernel.org
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:20:09 -08:00
Gui Hecheng
321592427c btrfs: fix dead lock while running replace and defrag concurrently
This can be reproduced by fstests: btrfs/070

The scenario is like the following:

replace worker thread		defrag thread
---------------------		-------------
copy_nocow_pages_worker		btrfs_defrag_file
  copy_nocow_pages_for_inode	    ...
				  btrfs_writepages
  |A| lock_extent_bits		    extent_write_cache_pages
				|B|   lock_page
					__extent_writepage
		...			  writepage_delalloc
					    find_lock_delalloc_range
				|B| 	      lock_extent_bits
  find_or_create_page
    pagecache_get_page
  |A| lock_page

This leads to an ABBA pattern deadlock. To fix it,
o we just change it to an AABB pattern which means to @unlock_extent_bits()
  before we @lock_page(), and in this way the @extent_read_full_page_nolock()
  is no longer in an locked context, so change it back to @extent_read_full_page()
  to regain protection.

o Since we @unlock_extent_bits() earlier, then before @write_page_nocow(),
  the extent may not really point at the physical block we want, so we
  have to check it before write.

Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Tested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:20:08 -08:00
Filipe Manana
5f5bc6b1e2 Btrfs: make xattr replace operations atomic
Replacing a xattr consists of doing a lookup for its existing value, delete
the current value from the respective leaf, release the search path and then
finally insert the new value. This leaves a time window where readers (getxattr,
listxattrs) won't see any value for the xattr. Xattrs are used to store ACLs,
so this has security implications.

This change also fixes 2 other existing issues which were:

*) Deleting the old xattr value without verifying first if the new xattr will
   fit in the existing leaf item (in case multiple xattrs are packed in the
   same item due to name hash collision);

*) Returning -EEXIST when the flag XATTR_CREATE is given and the xattr doesn't
   exist but we have have an existing item that packs muliple xattrs with
   the same name hash as the input xattr. In this case we should return ENOSPC.

A test case for xfstests follows soon.

Thanks to Alexandre Oliva for reporting the non-atomicity of the xattr replace
implementation.

Reported-by: Alexandre Oliva <oliva@gnu.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:20:07 -08:00
Filipe Manana
c7bc6319c5 Btrfs: avoid premature -ENOMEM in clear_extent_bit()
We try to allocate an extent state structure before acquiring the extent
state tree's spinlock as we might need a new one later and therefore avoid
doing later an atomic allocation while holding the tree's spinlock. However
we returned -ENOMEM if that initial non-atomic allocation failed, which is
a bit excessive since we might end up not needing the pre-allocated extent
state at all - for the case where the tree doesn't have any extent states
that cover the input range and cover too any other range. Therefore don't
return -ENOMEM if that pre-allocation fails.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:20:06 -08:00
Josef Bacik
7e33fd993a Btrfs: don't take the chunk_mutex/dev_list mutex in statfs V2
Our gluster boxes get several thousand statfs() calls per second, which begins
to suck hardcore with all of the lock contention on the chunk mutex and dev list
mutex.  We don't really need to hold these things, if we have transient
weirdness with statfs() because of the chunk allocator we don't care, so remove
this locking.

We still need the dev_list lock if you mount with -o alloc_start however, which
is a good argument for nuking that thing from orbit, but that's a patch for
another day.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:20:05 -08:00
Josef Bacik
633c0aad4c Btrfs: move read only block groups onto their own list V2
Our gluster boxes were spending lots of time in statfs because our fs'es are
huge.  The problem is statfs loops through all of the block groups looking for
read only block groups, and when you have several terabytes worth of data that
ends up being a lot of block groups.  Move the read only block groups onto a
read only list and only proces that list in
btrfs_account_ro_block_groups_free_space to reduce the amount of churn.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:20:04 -08:00
David Sterba
cd743fac42 btrfs: fix typos in btrfs_check_super_valid
Copy&paste errors in some messages and add few more missing macro
accessors.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:20:03 -08:00
Stefan Behrens
cf90c59e68 Btrfs: check-int: don't complain about balanced blocks
The xfstest btrfs/014 which tests the balance operation caused that the
check_int module complained that known blocks changed their physical
location. Since this is not an error in this case, only print such
message if the verbose mode was enabled.

Reported-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Tested-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:30 -08:00
Stefan Behrens
f382e4653f Btrfs: check_int: use the known block location
The xfstest btrfs/014 which tests the balance operation caused issues with
the check_int module. The attempt was made to use btrfs_map_block() to
find the physical location for a written block. However, this was not
at all needed since the location of the written block was known since
a hook to submit_bio() was the reason for entering the check_int module.
Additionally, after a block relocation it happened that btrfs_map_block()
failed causing misleading error messages afterwards.

This patch changes the check_int module to use the known information of
the physical location from the bio.

Reported-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Tested-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:29 -08:00
Filipe Manana
c8fd3de79f Btrfs: avoid returning -ENOMEM in convert_extent_bit() too early
We try to allocate an extent state before acquiring the tree's spinlock
just in case we end up needing to split an existing extent state into two.
If that allocation failed, we would return -ENOMEM.
However, our only single caller (transaction/log commit code), passes in
an extent state that was cached from a call to find_first_extent_bit() and
that has a very high chance to match exactly the input range (always true
for a transaction commit and very often, but not always, true for a log
commit) - in this case we end up not needing at all that initial extent
state used for an eventual split. Therefore just don't return -ENOMEM if
we can't allocate the temporary extent state, since we might not need it
at all, and if we end up needing one, we'll do it later anyway.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:29 -08:00
Filipe Manana
e38e2ed701 Btrfs: make find_first_extent_bit be able to cache any state
Right now the only caller of find_first_extent_bit() that is interested
in caching extent states (transaction or log commit), never gets an extent
state cached. This is because find_first_extent_bit() only caches states
that have at least one of the flags EXTENT_IOBITS or EXTENT_BOUNDARY, and
the transaction/log commit caller always passes a tree that doesn't have
ever extent states with any of those flags (they can only have one of the
following flags: EXTENT_DIRTY, EXTENT_NEW or EXTENT_NEED_WAIT).

This change together with the following one in the patch series (titled
"Btrfs: avoid returning -ENOMEM in convert_extent_bit() too early") will
help reduce significantly the chances of calls to convert_extent_bit()
fail with -ENOMEM when called from the transaction/log commit code.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:29 -08:00
Filipe Manana
663dfbb077 Btrfs: deal with convert_extent_bit errors to avoid fs corruption
When committing a transaction or a log, we look for btree extents that
need to be durably persisted by searching for ranges in a io tree that
have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear
those bits and set the EXTENT_NEED_WAIT bit, with calls to the function
convert_extent_bit, and then start writeback for the extents.

That function however can return an error (at the moment only -ENOMEM
is possible, specially when it does GFP_ATOMIC allocation requests
through alloc_extent_state_atomic) - that means the ranges didn't got
the EXTENT_NEED_WAIT bit set (or at least not for the whole range),
which in turn means a call to btrfs_wait_marked_extents() won't find
those ranges for which we started writeback, causing a transaction
commit or a log commit to persist a new superblock without waiting
for the writeback of extents in that range to finish first.

Therefore if a crash happens after persisting the new superblock and
before writeback finishes, we have a superblock pointing to roots that
weren't fully persisted or roots that point to nodes or leafs that weren't
fully persisted, causing all sorts of unexpected/bad behaviour as we endup
reading garbage from disk or the content of some node/leaf from a past
generation that got cowed or deleted and is no longer valid (for this later
case we end up getting error messages like "parent transid verify failed on
X wanted Y found Z" when reading btree nodes/leafs from disk).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:29 -08:00
Eryu Guan
2fc9f6baa2 Btrfs: return failure if btrfs_dev_replace_finishing() failed
device replace could fail due to another running scrub process or any
other errors btrfs_scrub_dev() may hit, but this failure doesn't get
returned to userspace.

The following steps could reproduce this issue

	mkfs -t btrfs -f /dev/sdb1 /dev/sdb2
	mount /dev/sdb1 /mnt/btrfs
	while true; do btrfs scrub start -B /mnt/btrfs >/dev/null 2>&1; done &
	btrfs replace start -Bf /dev/sdb2 /dev/sdb3 /mnt/btrfs
	# if this replace succeeded, do the following and repeat until
	# you see this log in dmesg
	# BTRFS: btrfs_scrub_dev(/dev/sdb2, 2, /dev/sdb3) failed -115
	#btrfs replace start -Bf /dev/sdb3 /dev/sdb2 /mnt/btrfs

	# once you see the error log in dmesg, check return value of
	# replace
	echo $?

Introduce a new dev replace result

BTRFS_IOCTL_DEV_REPLACE_RESULT_SCRUB_INPROGRESS

to catch -EINPROGRESS explicitly and return other errors directly to
userspace.

Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:28 -08:00
Shilong Wang
6b3a4d60db Btrfs: fix allocationg memory failure for btrfsic_state structure
size of @btrfsic_state needs more than 2M, it is very likely to
fail allocating memory using kzalloc(). see following mesage:

[91428.902148] Call Trace:
[<ffffffff816f6e0f>] dump_stack+0x4d/0x66
[<ffffffff811b1c7f>] warn_alloc_failed+0xff/0x170
[<ffffffff811b66e1>] __alloc_pages_nodemask+0x951/0xc30
[<ffffffff811fd9da>] alloc_pages_current+0x11a/0x1f0
[<ffffffff811b1e0b>] ? alloc_kmem_pages+0x3b/0xf0
[<ffffffff811b1e0b>] alloc_kmem_pages+0x3b/0xf0
[<ffffffff811d1018>] kmalloc_order+0x18/0x50
[<ffffffff811d1074>] kmalloc_order_trace+0x24/0x140
[<ffffffffa06c097b>] btrfsic_mount+0x8b/0xae0 [btrfs]
[<ffffffff810af555>] ? check_preempt_curr+0x85/0xa0
[<ffffffff810b2de3>] ? try_to_wake_up+0x103/0x430
[<ffffffffa063d200>] open_ctree+0x1bd0/0x2130 [btrfs]
[<ffffffffa060fdde>] btrfs_mount+0x62e/0x8b0 [btrfs]
[<ffffffff811fd9da>] ? alloc_pages_current+0x11a/0x1f0
[<ffffffff811b0a5e>] ? __get_free_pages+0xe/0x50
[<ffffffff81230429>] mount_fs+0x39/0x1b0
[<ffffffff812509fb>] vfs_kern_mount+0x6b/0x150
[<ffffffff812537fb>] do_mount+0x27b/0xc30
[<ffffffff811b0a5e>] ? __get_free_pages+0xe/0x50
[<ffffffff812544f6>] SyS_mount+0x96/0xf0
[<ffffffff81701970>] system_call_fastpath+0x16/0x1b

Since we are allocating memory for hash table array, so
it will be good if we could allocate continuous pages here.

Fix this problem by firstly trying kzalloc(), if we fail,
use vzalloc() instead.

Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:28 -08:00
Filipe Manana
e6eb43142a Btrfs: report error after failure inlining extent in compressed write path
If cow_file_range_inline() failed, when called from compress_file_range(),
we were tagging the locked page for writeback, end its writeback and unlock it,
but not marking it with an error nor setting AS_EIO in inode's mapping flags.

This made it impossible for a caller of filemap_fdatawrite_range (writepages)
or filemap_fdatawait_range() to know that an error happened. And the return
value of compress_file_range() is useless because it's returned to a workqueue
task and not to the task calling filemap_fdatawrite_range (writepages).

This change applies on top of the previous patchset starting at the patch
titled:

    "[1/5] Btrfs: set page and mapping error on compressed write failure"

Which changed extent_clear_unlock_delalloc() to use SetPageError and
mapping_set_error().

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:28 -08:00
Filipe Manana
728404dacf Btrfs: add helper btrfs_fdatawrite_range
To avoid duplicating this double filemap_fdatawrite_range() call for
inodes with async extents (compressed writes) so often.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:28 -08:00
Filipe Manana
075bdbdbe9 Btrfs: correctly flush compressed data before/after direct IO
For compressed writes, after doing the first filemap_fdatawrite_range() we
don't get the pages tagged for writeback immediately. Instead we create
a workqueue task, which is run by other kthread, and keep the pages locked.
That other kthread compresses data, creates the respective ordered extent/s,
tags the pages for writeback and unlocks them. Therefore we need a second
call to filemap_fdatawrite_range() if we have compressed writes, as this
second call will wait for the pages to become unlocked, then see they became
tagged for writeback and finally wait for the writeback to finish.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:27 -08:00
Filipe Manana
c44f649e28 Btrfs: make inode.c:compress_file_range() return void
Its return value is useless, its single caller ignores it and can't do
anything with it anyway, since it's a workqueue task and not the task
calling filemap_fdatawrite_range (writepages) nor filemap_fdatawait_range().
Failure is communicated to such functions via start and end of writeback
with the respective pages tagged with an error and AS_EIO flag set in the
inode's imapping.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:27 -08:00
Shilong Wang
4bcbb33255 Btrfs: fix incorrect compression ratio detection
Steps to reproduce:
 # mkfs.btrfs -f /dev/sdb
 # mount -t btrfs /dev/sdb /mnt -o compress=lzo
 # dd if=/dev/zero of=/mnt/data bs=$((33*4096)) count=1

after previous steps, inode will be detected as bad compression ratio,
and NOCOMPRESS flag will be set for that inode.

Reason is that compress have a max limit pages every time(128K), if a
132k write in, it will be splitted into two write(128k+4k), this bug
is a leftover for commit 68bb462d42a(Btrfs: don't compress for a small write)

Fix this problem by checking every time before compression, if it is a
small write(<=blocksize), we bail out and fall into nocompression directly.

Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:27 -08:00
Filipe Manana
7bdcefc103 Btrfs: don't ignore compressed bio write errors
Our compressed bio write end callback was essentially ignoring the error
parameter. When a write error happens, it must pass a value of 0 to the
inode's write_page_end_io_hook callback, SetPageError on the respective
pages and set AS_EIO in the inode's mapping flags, so that a call to
filemap_fdatawait_range() / filemap_fdatawait() can find out that errors
happened (we surely don't want silent failures on fsync for example).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:26 -08:00
Filipe Manana
dec8f17563 Btrfs: make inode.c:submit_compressed_extents() return void
Its return value is completely ignored by its single caller and it's
useless anyway, since errors are indicated through SetPageError and
the bit AS_EIO set in the flags of the inode's mapping. The caller
can't do anything with the value, as it's invoked from a workqueue
task and not by the task calling filemap_fdatawrite_range (which calls
the writepages address space callback, which in turn calls the inode's
fill_delalloc callback).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:26 -08:00
Filipe Manana
3d7a820f71 Btrfs: process all async extents on compressed write failure
If we had an error when processing one of the async extents from our list,
we were not processing the remaining async extents, meaning we would leak
those async_extent structs, never release the pages with the compressed
data and never unlock and clear the dirty flag from the inode's pages (those
that correspond to the uncompressed content).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:26 -08:00
Filipe Manana
40ae837b43 Btrfs: don't leak pages and memory on compressed write error
In inode.c:submit_compressed_extents(), if we fail before calling
btrfs_submit_compressed_write(), or when that function fails, we
were freeing the async_extent structure without releasing its pages
and freeing the pages array.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:26 -08:00
Filipe Manana
fce2a4e6b2 Btrfs: fix hang on compressed write error
In inode.c:submit_compressed_extents(), before calling btrfs_submit_compressed_write()
we start writeback for all pages, clear their dirty flag, unlock them, etc, but if
btrfs_submit_compressed_write() fails (at the moment it can only fail with -ENOMEM),
we never end the writeback on the pages, so any filemap_fdatawait_range() call will
hang forever. We were also not calling the writepage end io hook, which means the
corresponding ordered extent will never complete and all its waiters will block
forever, such as a full fsync (via btrfs_wait_ordered_range()).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:25 -08:00
Filipe Manana
704de49d2b Btrfs: set page and mapping error on compressed write failure
If we fail in submit_compressed_extents() before calling btrfs_submit_compressed_write(),
we start and end the writeback for the pages (clear their dirty flag, unlock them, etc)
but we don't tag the pages, nor the inode's mapping, with an error. This makes it
impossible for a caller of filemap_fdatawait_range() (fsync, or transaction commit
for e.g.) know that there was an error.

Note that the return value of submit_compressed_extents() is useless, as that function
is executed by a workqueue task and not directly by the fill_delalloc callback. This
means the writepage/s callbacks of the inode's address space operations don't get that
return value.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-11-20 17:14:25 -08:00
Al Viro
b93b41d4c7 ext4: kill ext4_kvfree()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-11-20 12:19:11 -05:00
Miklos Szeredi
7676895f47 ovl: ovl_dir_fsync() cleanup
Check against !OVL_PATH_LOWER instead of OVL_PATH_MERGE.  For a copied up
directory the two are currently equivalent.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-11-20 16:40:02 +01:00
Miklos Szeredi
c9f00fdb9a ovl: pass dentry into ovl_dir_read_merged()
Pass dentry into ovl_dir_read_merged() insted of upperpath and lowerpath.
This cleans up callers and paves the way for multi-layer directory reads.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-11-20 16:40:01 +01:00
Miklos Szeredi
71d509280f ovl: use lockless_dereference() for upperdentry
Don't open code lockless_dereference() in ovl_upperdentry_dereference().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-11-20 16:40:01 +01:00
Miklos Szeredi
91c7794713 ovl: allow filenames with comma
Allow option separator (comma) to be escaped with backslash.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-11-20 16:40:00 +01:00
Miklos Szeredi
521484639e ovl: fix race in private xattr checks
Xattr operations can race with copy up.  This does not matter as long as
we consistently fiter out "trunsted.overlay.opaque" attribute on upper
directories.

Previously we checked parent against OVL_PATH_MERGE.  This is too general,
and prone to race with copy-up.  I.e. we found the parent to be on the
lower layer but ovl_dentry_real() would return the copied-up dentry,
possibly with the "opaque" attribute.

So instead use ovl_path_real() and decide to filter the attributes based on
the actual type of the dentry we'll use.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-11-20 16:40:00 +01:00
Miklos Szeredi
a105d685a8 ovl: fix remove/copy-up race
ovl_remove_and_whiteout() needs to check if upper dentry exists or not
after having locked upper parent directory.

Previously we used a "type" value computed before locking the upper parent
directory, which is susceptible to racing with copy-up.

There's a similar check in ovl_check_empty_and_clear().  This one is not
actually racy, since copy-up doesn't change the "emptyness" property of a
directory.  Add a comment to this effect, and check the existence of upper
dentry locally to make the code cleaner.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-11-20 16:39:59 +01:00
Miklos Szeredi
ef94b1864d ovl: rename filesystem type to "overlay"
Some distributions carry an "old" format of overlayfs while mainline has a
"new" format.

The distros will possibly want to keep the old overlayfs alongside the new
for compatibility reasons.

To make it possible to differentiate the two versions change the name of
the new one from "overlayfs" to "overlay".

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Andy Whitcroft <apw@canonical.com>
2014-11-20 16:39:59 +01:00
Masanari Iida
6774def642 treewide: fix typo in printk and Kconfig
This patch fix spelling typo in printk and Kconfig within
various part of kernel sources.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-20 14:56:11 +01:00
Al Viro
ec7d879c45 GFS2: gfs2_atomic_open(): simplify the use of finish_no_open()
In ->atomic_open(inode, dentry, file, opened) calling finish_no_open(file, NULL)
is equivalent to dget(dentry); return finish_no_open(file, dentry);

No need to open-code that...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-20 11:18:08 +00:00
Al Viro
9265f1d0c7 GFS2: gfs2_dir_get_hash_table(): avoiding deferred vfree() is easy here...
vfree() is allowed under spinlock these days, but it's cheaper when
it doesn't step into deferred case and here it's very easy to avoid.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-20 10:29:44 +00:00
Al Viro
3cdcf63ed2 GFS2: use kvfree() instead of open-coding it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-20 10:29:14 +00:00
Al Viro
44bb31bac5 GFS2: gfs2_create_inode(): don't bother with d_splice_alias()
dentry is always hashed and negative, inode - non-error, non-NULL and
non-directory.  In such conditions d_splice_alias() is equivalent to
"d_instantiate(dentry, inode) and return NULL", which simplifies the
downstream code and is consistent with the "have to create a new object"
case.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-20 10:17:39 +00:00
Al Viro
571a4b5797 GFS2: bugger off early if O_CREAT open finds a directory
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-20 10:16:58 +00:00
Jaegeuk Kim
857dc4e059 f2fs: write SSA pages under memory pressure
Under memory pressure, we don't need to skip SSA page writes.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-19 22:49:33 -08:00
Jaegeuk Kim
27c6bd60ac f2fs: submit bio for node blocks in the reclaim path
If a node page is request to be written during the reclaiming path, we should
submit the bio to avoid pending to recliam it.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-19 22:49:32 -08:00
Chao Yu
67298804f3 f2fs: introduce struct inode_management to wrap inner fields
Now in f2fs, we have three inode cache: ORPHAN_INO, APPEND_INO, UPDATE_INO,
and we manage fields related to inode cache separately in struct f2fs_sb_info
for each inode cache type.
This makes codes a bit messy, so that this patch intorduce a new struct
inode_management to wrap inner fields as following which make codes more neat.

/* for inner inode cache management */
struct inode_management {
	struct radix_tree_root ino_root;	/* ino entry array */
	spinlock_t ino_lock;			/* for ino entry lock */
	struct list_head ino_list;		/* inode list head */
	unsigned long ino_num;			/* number of entries */
};

struct f2fs_sb_info {
	...
	struct inode_management im[MAX_INO_ENTRY];      /* manage inode cache */
	...
}

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-19 22:49:32 -08:00
Chao Yu
aba291b3d8 f2fs: remove unneeded check code with option in f2fs_remount
Because we have checked the contrary condition in case of "if" judgment, we do
not need to check the condition again in case of "else" judgment. Let's remove
it.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-19 22:49:31 -08:00
Chao Yu
6c02993203 f2fs: avoid unable to restart gc thread in remount
In f2fs_remount, we will stop gc thread and set need_restart_gc as true when new
option is set without BG_GC, then if any error occurred in the following
procedure, we can restore to start the gc thread.
But after that, We will fail to restore gc thread in start_gc_thread as BG_GC is
not set in new option, so we'd better move this condition judgment out of
start_gc_thread to fix this issue.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-19 22:49:30 -08:00
Markus Elfring
fdf2657bc8 udf: One function call less in udf_fill_super() after error detection
The iput() function was called in up to three cases by the udf_fill_super()
function during error handling even if the passed data structure element
contained still a null pointer. This implementation detail could be improved
by the introduction of another jump label.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-19 21:56:06 +01:00
Markus Elfring
0d454e4a44 udf: Deletion of unnecessary checks before the function call "iput"
The iput() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-19 21:55:45 +01:00
David Teigland
2ab4bd8ea3 dlm: adopt orphan locks
A process may exit, leaving an orphan lock in the lockspace.
This adds the capability for another process to acquire the
orphan lock.  Acquiring the orphan just moves the lock from
the orphan list onto the acquiring process's list of locks.

An adopting process must specify the resource name and mode
of the lock it wants to adopt.  If a matching lock is found,
the lock is moved to the caller's 's list of locks, and the
lkid of the lock is returned like the lkid of a new lock.

If an orphan with a different mode is found, then -EAGAIN is
returned.  If no orphan lock is found on the resource, then
-ENOENT is returned.  No async completion is used because
the result is immediately available.

Also, when orphans are purged, allow a zero nodeid to refer
to the local nodeid so the caller does not need to look up
the local nodeid.

Signed-off-by: David Teigland <teigland@redhat.com>
2014-11-19 14:48:02 -06:00
Trond Myklebust
c6c15e1ed3 nfsd: Fix slot wake up race in the nfsv4.1 callback code
The currect code for nfsd41_cb_get_slot() and nfsd4_cb_done() has no
locking in order to guarantee atomicity, and so allows for races of
the form.

Task 1                                  Task 2
======                                  ======
if (test_and_set_bit(0) != 0) {
                                        clear_bit(0)
                                        rpc_wake_up_next(queue)
        rpc_sleep_on(queue)
        return false;
}

This patch breaks the race condition by adding a retest of the bit
after the call to rpc_sleep_on().

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-11-19 15:45:44 -05:00
Chris Mason
f82c458a2c btrfs: fix lockups from btrfs_clear_path_blocking
The fair reader/writer locks mean that btrfs_clear_path_blocking needs
to strictly follow lock ordering rules even when we already have
blocking locks on a given path.

Before we can clear a blocking lock on the path, we need to make sure
all of the locks have been converted to blocking.  This will remove lock
inversions against anyone spinning in write_lock() against the buffers
we're trying to get read locks on.  These inversions didn't exist before
the fair read/writer locks, but now we need to be more careful.

We papered over this deadlock in the past by changing
btrfs_try_read_lock() to be a true trylock against both the spinlock and
the blocking lock.  This was slower, and not sufficient to fix all the
deadlocks.  This patch adds a btrfs_tree_read_lock_atomic(), which
basically means get the spinlock but trylock on the blocking lock.

Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reported-by: Patrick Schmid <schmid@phys.ethz.ch>
cc: stable@vger.kernel.org #v3.15+
2014-11-19 10:34:35 -08:00