Commit graph

49,973 commits

Author SHA1 Message Date
Trond Myklebust
9216106a84 NFSv4.1: clean up nfs4_recall_slot to use nfs4_alloc_slots
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21 09:29:53 -05:00
Trond Myklebust
2d473d378e NFSv4.1: nfs4_alloc_slots doesn't need zeroing
All that memory is going to be initialised to non-zero by
nfs4_add_and_init_slots anyway.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21 09:29:52 -05:00
Trond Myklebust
43095d3972 NFSv4.1: We must bump the clientid sequence number after CREATE_SESSION
We must always bump the clientid sequence number after a successful
call to CREATE_SESSION on the server. The result of
nfs4_verify_channel_attrs() is irrelevant to that requirement.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21 09:29:52 -05:00
Trond Myklebust
688a9024e2 NFSv4.1: Adjust CREATE_SESSION arguments when mounting a new filesystem
If we're mounting a new filesystem, ensure that the session has negotiated
large enough request and reply sizes to match the wsize and rsize mount
arguments.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21 09:29:51 -05:00
Trond Myklebust
ae72ae6760 NFSv4.1: Don't confuse CREATE_SESSION arguments and results
Don't store the target request and response sizes in the same
variables used to store the server's replies to those targets.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21 09:29:51 -05:00
Trond Myklebust
5df904aeb0 NFSv4.1: Handle session reset and bind_conn_to_session before lease check
We can't send a SEQUENCE op unless the session is OK, so it is pointless
to handle the CHECK_LEASE state before we've dealt with SESSION_RESET
and BIND_CONN_TO_SESSION.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21 09:28:42 -05:00
Linus Torvalds
ca6215dfc7 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull reiserfs and ext3 fixes from Jan Kara:
 "Fixes of reiserfs deadlocks when quotas are enabled (locking there was
  completely busted by BKL conversion) and also one small ext3 fix in
  the trim interface."

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext3: Avoid underflow of in ext3_trim_fs()
  reiserfs: Move quota calls out of write lock
  reiserfs: Protect reiserfs_quota_write() with write lock
  reiserfs: Protect reiserfs_quota_on() with write lock
  reiserfs: Fix lock ordering during remount
2012-11-20 18:48:25 -10:00
Bryan Schumaker
6bdb5f213c NFS: Add sequence_priviliged_ops for nfs4_proc_sequence()
If I mount an NFS v4.1 server to a single client multiple times and then
run xfstests over each mountpoint I usually get the client into a state
where recovery deadlocks.  The server informs the client of a
cb_path_down sequence error, the client then does a
bind_connection_to_session and checks the status of the lease.

I found that bind_connection_to_session sets the NFS4_SESSION_DRAINING
flag on the client, but this flag is never unset before
nfs4_check_lease() reaches nfs4_proc_sequence().  This causes the client
to deadlock, halting all NFS activity to the server.  nfs4_proc_sequence()
is only called by the state manager, so I can change it to run in privileged
mode to bypass the NFS4_SESSION_DRAINING check and avoid the deadlock.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
2012-11-20 23:34:54 -05:00
Eric W. Biederman
98f842e675 proc: Usable inode numbers for the namespace file descriptors.
Assign a unique proc inode to each namespace, and use that
inode number to ensure we only allocate at most one proc
inode for every namespace in proc.

A single proc inode per namespace allows userspace to test
to see if two processes are in the same namespace.

This has been a long requested feature and only blocked because
a naive implementation would put the id in a global space and
would ultimately require having a namespace for the names of
namespaces, making migration and certain virtualization tricks
impossible.

We still don't have per superblock inode numbers for proc, which
appears necessary for application unaware checkpoint/restart and
migrations (if the application is using namespace file descriptors)
but that is now allowd by the design if it becomes important.

I have preallocated the ipc and uts initial proc inode numbers so
their structures can be statically initialized.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-20 04:19:49 -08:00
Eric W. Biederman
bf056bfa80 proc: Fix the namespace inode permission checks.
Change the proc namespace files into symlinks so that
we won't cache the dentries for the namespace files
which can bypass the ptrace_may_access checks.

To support the symlinks create an additional namespace
inode with it's own set of operations distinct from the
proc pid inode and dentry methods as those no longer
make sense.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-20 04:19:48 -08:00
Eric W. Biederman
33d6dce607 proc: Generalize proc inode allocation
Generalize the proc inode allocation so that it can be
used without having to having to create a proc_dir_entry.

This will allow namespace file descriptors to remain light
weight entitities but still have the same inode number
when the backing namespace is the same.

Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-20 04:19:19 -08:00
Eric W. Biederman
4f326c0064 userns: Allow unprivilged mounts of proc and sysfs
- The context in which proc and sysfs are mounted have no
  effect on the the uid/gid of their files so no conversion is
  needed except allowing the mount.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-20 04:19:18 -08:00
Eric W. Biederman
e9f238c304 procfs: Print task uids and gids in the userns that opened the proc file
Instead of using current_userns() use the userns of the opener
of the file so that if the file is passed between processes
the contents of the file do not change.

Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-20 04:18:15 -08:00
Eric W. Biederman
cde1975bc2 userns: Implent proc namespace operations
This allows entering a user namespace, and the ability
to store a reference to a user namespace with a bind
mount.

Addition of missing userns_ns_put in userns_install
from Gao feng <gaofeng@cn.fujitsu.com>

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-20 04:18:13 -08:00
Eric W. Biederman
7fa294c899 userns: Allow chown and setgid preservation
- Allow chown if CAP_CHOWN is present in the current user namespace
  and the uid of the inode maps into the current user namespace, and
  the destination uid or gid maps into the current user namespace.

- Allow perserving setgid when changing an inode if CAP_FSETID is
  present in the current user namespace and the owner of the file has
  a mapping into the current user namespace.

Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-20 04:17:24 -08:00
Christoph Hellwig
0e446be448 xfs: add CRC checks to the log
Implement CRCs for the log buffers.  We re-use a field in
struct xlog_rec_header that was used for a weak checksum of the
log buffer payload in debug builds before.

The new checksumming uses the crc32c checksum we will use elsewhere
in XFS, and also protects the record header and addition cycle data.

Due to this there are some interesting changes in xlog_sync, as we
need to do the cycle wrapping for the split buffer case much earlier,
as we would touch the buffer after generating the checksum otherwise.

The CRC calculation is always enabled, even for non-CRC filesystems,
as adding this CRC does not change the log format. On non-CRC
filesystems, only issue an alert if a CRC mismatch is found and
allow recovery to continue - this will act as an indicator that
log recovery problems are a result of log corruption. On CRC enabled
filesystems, however, log recovery will fail.

Note that existing debug kernels will write a simple checksum value
to the log, so the first time this is run on a filesystem taht was
last used on a debug kernel it will through CRC mismatch warning
errors. These can be ignored.

Initially based on a patch from Dave Chinner, then modified
significantly by Christoph Hellwig.  Modified again by Dave Chinner
to get to this version.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-19 20:18:41 -06:00
Christoph Hellwig
bc02e8693d xfs: add CRC infrastructure
- add a mount feature bit for CRC enabled filesystems
 - add some helpers for generating and verifying the CRCs
 - add a copy_uuid helper

The checksumming helpers are loosely based on similar ones in sctp,
all other bits come from Dave Chinner.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-19 20:11:24 -06:00
Lukas Czerner
ae49eeec78 ext3: Avoid underflow of in ext3_trim_fs()
Currently if len argument in ext3_trim_fs() is smaller than one block,
the 'end' variable underflow. Avoid that by returning EINVAL if len is
smaller than file system block.

Also remove useless unlikely().

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-11-19 21:36:12 +01:00
Jan Kara
7af1168693 reiserfs: Move quota calls out of write lock
Calls into highlevel quota code cannot happen under the write lock. These
calls take dqio_mutex which ranks above write lock. So drop write lock
before calling back into quota code.

CC: stable@vger.kernel.org # >= 3.0
Signed-off-by: Jan Kara <jack@suse.cz>
2012-11-19 21:34:33 +01:00
Jan Kara
361d94a338 reiserfs: Protect reiserfs_quota_write() with write lock
Calls into reiserfs journalling code and reiserfs_get_block() need to
be protected with write lock. We remove write lock around calls to high
level quota code in the next patch so these paths would suddently become
unprotected.

CC: stable@vger.kernel.org # >= 3.0
Signed-off-by: Jan Kara <jack@suse.cz>
2012-11-19 21:34:33 +01:00
Jan Kara
b9e06ef2e8 reiserfs: Protect reiserfs_quota_on() with write lock
In reiserfs_quota_on() we do quite some work - for example unpacking
tail of a quota file. Thus we have to hold write lock until a moment
we call back into the quota code.

CC: stable@vger.kernel.org # >= 3.0
Signed-off-by: Jan Kara <jack@suse.cz>
2012-11-19 21:34:32 +01:00
Jan Kara
3bb3e1fc47 reiserfs: Fix lock ordering during remount
When remounting reiserfs dquot_suspend() or dquot_resume() can be called.
These functions take dqonoff_mutex which ranks above write lock so we have
to drop it before calling into quota code.

CC: stable@vger.kernel.org # >= 3.0
Signed-off-by: Jan Kara <jack@suse.cz>
2012-11-19 21:34:32 +01:00
Eric W. Biederman
3cdf5b45ff userns: Ignore suid and sgid on binaries if the uid or gid can not be mapped
When performing an exec where the binary lives in one user namespace and
the execing process lives in another usre namespace there is the possibility
that the target uids can not be represented.

Instead of failing the exec simply ignore the suid/sgid bits and run
the binary with lower privileges.   We already do this in the case
of MNT_NOSUID so this should be a well tested code path.

As the user and group are not changed this should not introduce any
security issues.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 05:59:23 -08:00
Zhao Hongjiang
ae11e0f184 userns: fix return value on mntns_install() failure
Change return value from -EINVAL to -EPERM when the permission check fails.

Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 05:59:22 -08:00
Eric W. Biederman
0c55cfc416 vfs: Allow unprivileged manipulation of the mount namespace.
- Add a filesystem flag to mark filesystems that are safe to mount as
  an unprivileged user.

- Add a filesystem flag to mark filesystems that don't need MNT_NODEV
  when mounted by an unprivileged user.

- Relax the permission checks to allow unprivileged users that have
  CAP_SYS_ADMIN permissions in the user namespace referred to by the
  current mount namespace to be allowed to mount, unmount, and move
  filesystems.

Acked-by: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 05:59:21 -08:00
Eric W. Biederman
7a472ef4be vfs: Only support slave subtrees across different user namespaces
Sharing mount subtress with mount namespaces created by unprivileged
users allows unprivileged mounts created by unprivileged users to
propagate to mount namespaces controlled by privileged users.

Prevent nasty consequences by changing shared subtrees to slave
subtress when an unprivileged users creates a new mount namespace.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 05:59:20 -08:00
Eric W. Biederman
771b137168 vfs: Add a user namespace reference from struct mnt_namespace
This will allow for support for unprivileged mounts in a new user namespace.

Acked-by: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 05:59:19 -08:00
Eric W. Biederman
8823c079ba vfs: Add setns support for the mount namespace
setns support for the mount namespace is a little tricky as an
arbitrary decision must be made about what to set fs->root and
fs->pwd to, as there is no expectation of a relationship between
the two mount namespaces.  Therefore I arbitrarily find the root
mount point, and follow every mount on top of it to find the top
of the mount stack.  Then I set fs->root and fs->pwd to that
location.  The topmost root of the mount stack seems like a
reasonable place to be.

Bind mount support for the mount namespace inodes has the
possibility of creating circular dependencies between mount
namespaces.  Circular dependencies can result in loops that
prevent mount namespaces from every being freed.  I avoid
creating those circular dependencies by adding a sequence number
to the mount namespace and require all bind mounts be of a
younger mount namespace into an older mount namespace.

Add a helper function proc_ns_inode so it is possible to
detect when we are attempting to bind mound a namespace inode.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 05:59:18 -08:00
Eric W. Biederman
a85fb273c9 vfs: Allow chroot if you have CAP_SYS_CHROOT in your user namespace
Once you are confined to a user namespace applications can not gain
privilege and escape the user namespace so there is no longer a reason
to restrict chroot.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 05:59:17 -08:00
Eric W. Biederman
57e8391d32 pidns: Add setns support
- Pid namespaces are designed to be inescapable so verify that the
  passed in pid namespace is a child of the currently active
  pid namespace or the currently active pid namespace itself.

  Allowing the currently active pid namespace is important so
  the effects of an earlier setns can be cancelled.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 05:59:14 -08:00
Eric W. Biederman
0a01f2cc39 pidns: Make the pidns proc mount/umount logic obvious.
Track the number of pids in the proc hash table.  When the number of
pids goes to 0 schedule work to unmount the kernel mount of proc.

Move the mount of proc into alloc_pid when we allocate the pid for
init.

Remove the surprising calls of pid_ns_release proc in fork and
proc_flush_task.  Those code paths really shouldn't know about proc
namespace implementation details and people have demonstrated several
times that finding and understanding those code paths is difficult and
non-obvious.

Because of the call path detach pid is alwasy called with the
rtnl_lock held free_pid is not allowed to sleep, so the work to
unmounting proc is moved to a work queue.  This has the side benefit
of not blocking the entire world waiting for the unnecessary
rcu_barrier in deactivate_locked_super.

In the process of making the code clear and obvious this fixes a bug
reported by Gao feng <gaofeng@cn.fujitsu.com> where we would leak a
mount of proc during clone(CLONE_NEWPID|CLONE_NEWNET) if copy_pid_ns
succeeded and copy_net_ns failed.

Acked-by: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 05:59:10 -08:00
Eric W. Biederman
17cf22c33e pidns: Use task_active_pid_ns where appropriate
The expressions tsk->nsproxy->pid_ns and task_active_pid_ns
aka ns_of_pid(task_pid(tsk)) should have the same number of
cache line misses with the practical difference that
ns_of_pid(task_pid(tsk)) is released later in a processes life.

Furthermore by using task_active_pid_ns it becomes trivial
to write an unshare implementation for the the pid namespace.

So I have used task_active_pid_ns everywhere I can.

In fork since the pid has not yet been attached to the
process I use ns_of_pid, to achieve the same effect.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 05:59:09 -08:00
Adam Buchbinder
b3834be5c4 various: Fix spelling of "asynchronous" in comments.
"Asynchronous" is misspelled in some comments. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:32:13 +01:00
Adam Buchbinder
48fc7f7e78 Fix misspellings of "whether" in comments.
"Whether" is misspelled in various comments across the tree; this
fixes them. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:31:35 +01:00
Masanari Iida
02582e9bcc treewide: fix typo of "suport" in various comments and Kconfig
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:16:09 +01:00
Eric W. Biederman
ae06c7c83f procfs: Don't cache a pid in the root inode.
Now that we have s_fs_info pointing to our pid namespace
the original reason for the proc root inode having a struct
pid is gone.

Caching a pid in the root inode has led to some complicated
code.  Now that we don't need the struct pid, just remove it.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 03:09:35 -08:00
Eric W. Biederman
e656d8a6f7 procfs: Use the proc generic infrastructure for proc/self.
I had visions at one point of splitting proc into two filesystems.  If
that had happened proc/self being the the part of proc that actually deals
with pids would have been a nice cleanup.  As it is proc/self requires
a lot of unnecessary infrastructure for a single file.

The only user visible change is that a mounted /proc for a pid namespace
that is dead now shows a broken proc symlink, instead of being completely
invisible.  I don't think anyone will notice or care.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 03:09:34 -08:00
Eric W. Biederman
73f7ef4359 sysctl: Pass useful parameters to sysctl permissions
- Current is implicitly avaiable so passing current->nsproxy isn't useful.
- The ctl_table_header is needed to find how the sysctl table is connected
  to the rest of sysctl.
- ctl_table_root is avaiable in the ctl_table_header so no need to it.

With these changes it becomes possible to write a version of
net_sysctl_permission that takes into account the network namespace of
the sysctl table, an important feature in extending the user namespace.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18 20:30:55 -05:00
Al Viro
3587b1b097 fanotify: fix FAN_Q_OVERFLOW case of fanotify_read()
If the FAN_Q_OVERFLOW bit set in event->mask, the fanotify event
metadata will not contain a valid file descriptor, but
copy_event_to_user() didn't check for that, and unconditionally does a
fd_install() on the file descriptor.

Which in turn will cause a BUG_ON() in __fd_install().

Introduced by commit 352e3b2492 ("fanotify: sanitize failure exits in
copy_event_to_user()")

Mea culpa - missed that path ;-/

Reported-by: Alex Shi <lkml.alex@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-18 09:30:00 -10:00
Linus Torvalds
8d938105e4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc VFS fixes from Al Viro:
 "Remove a bogus BUG_ON() that can trigger spuriously + alpha bits of
  do_mount() constification I'd missed during the merge window."

This pull request came in a week ago, I missed it for some reason.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  kill bogus BUG_ON() in do_close_on_exec()
  missing const in alpha callers of do_mount()
2012-11-18 09:13:48 -10:00
Linus Torvalds
d28d3730fd xfs: bugfixes for 3.7-rc7
- fix attr tree double split corruption
 - fix broken error handling in xfs_vm_writepage
 - drop buffer io reference when a bad bio is built
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQp7sfAAoJENaLyazVq6ZOWHwP/2WTlenvM74i8HDa/nYW8KTC
 EubCZ6X1C7LPTV9tm9YUpKZ1VtI1O+OmuGcSmWdBKSMMoBVNyKvWXvrJeVKBVtXV
 sQ/jh1zCiPYzt9DfxGuarkw8Uy5qKNOYrbEAK1WwPMeOsDODYncfmTm+A/VYMeTt
 bWOjaxFd5QQOMuf0x9NO/keZc84R5l51ezYxA7HyYa5XvV/MDmLLVL0IhuSTFKyw
 oOiQMp0hby4zsJg6nqu/eINmdlgBIw+32m8aMSB2jreUQm4yvt0CY7M3Zq6sPmsM
 2tC6cFonPw31FBBu9jvv9h5wNz7McyzxtZBS0+zDV+7K0UrIyxWm1BhzZIXoXzLz
 vHwc4gnZV8nOP/g34aftHLYYRD3ZJhG8mX5AdBRzlWWqDSFvYVEq+1evHrv8kk4l
 coTapzimNnR3aJ16qdP1M0gExKO9nrGVqrRi8ndLNbxLpxC9mFG7CfJBQPMumukX
 G8pTV1wQvqONHDNlN4mxqMBHN0d9dGp5xjYQ0Q92/siIA1C5szjCwTHekKNrP6Ol
 7xd+nO7Xcgj7Uwaakv31paqOSAGhla6H5jvxPF2A54hZWQqlp88QpChLt3LFPxwh
 tEYTEf1zRoaoCS4TD3zMYTLY+9cXvUybSIf3hbgns+JMYHJtuZdzbvcaXE6Wl4Jr
 6esA5fsBFP1J2/EzpLof
 =depY
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-v3.7-rc7' of git://oss.sgi.com/xfs/xfs

Pull xfs bugfixes from Ben Myers:

 - fix attr tree double split corruption

 - fix broken error handling in xfs_vm_writepage

 - drop buffer io reference when a bad bio is built

* tag 'for-linus-v3.7-rc7' of git://oss.sgi.com/xfs/xfs:
  xfs: drop buffer io reference when a bad bio is built
  xfs: fix broken error handling in xfs_vm_writepage
  xfs: fix attr tree double split corruption
2012-11-18 08:29:34 -10:00
Alexey Khoroshilov
2cbba75a56 jffs2: hold erase_completion_lock on exit
Users of jffs2_do_reserve_space() expect they still held
erase_completion_lock after call to it. But there is a path
where jffs2_do_reserve_space() leaves erase_completion_lock unlocked.
The patch fixes it.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-18 11:59:01 +02:00
Ingo Molnar
ec05a2311c Merge branch 'sched/urgent' into sched/core
Merge in fixes before we queue up dependent bits, to avoid conflicts.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-11-18 09:34:44 +01:00
Maxime Bizon
b042e47491 pstore/ram: Fix undefined usage of rounddown_pow_of_two(0)
record_size / console_size / ftrace_size can be 0 (this is how you disable
the feature), but rounddown_pow_of_two(0) is undefined. As suggested by
Kees Cook, use !is_power_of_2() as a condition to call
rounddown_pow_of_two and avoid its undefined behavior on the value 0. This
issue has been present since commit 1894a253 (ramoops: Move to
fs/pstore/ram.c).

Cc: stable@vger.kernel.org
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-17 17:40:57 -08:00
Dave Chinner
d69043c42d xfs: drop buffer io reference when a bad bio is built
Error handling in xfs_buf_ioapply_map() does not handle IO reference
counts correctly. We increment the b_io_remaining count before
building the bio, but then fail to decrement it in the failure case.
This leads to the buffer never running IO completion and releasing
the reference that the IO holds, so at unmount we can leak the
buffer. This leak is captured by this assert failure during unmount:

XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/xfs_mount.c, line: 273

This is not a new bug - the b_io_remaining accounting has had this
problem for a long, long time - it's just very hard to get a
zero length bio being built by this code...

Further, the buffer IO error can be overwritten on a multi-segment
buffer by subsequent bio completions for partial sections of the
buffer. Hence we should only set the buffer error status if the
buffer is not already carrying an error status. This ensures that a
partial IO error on a multi-segment buffer will not be lost. This
part of the problem is a regression, however.

cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-17 09:36:57 -06:00
Dave Chinner
3daed8bc3e xfs: fix broken error handling in xfs_vm_writepage
When we shut down the filesystem, it might first be detected in
writeback when we are allocating a inode size transaction. This
happens after we have moved all the pages into the writeback state
and unlocked them. Unfortunately, if we fail to set up the
transaction we then abort writeback and try to invalidate the
current page. This then triggers are BUG() in block_invalidatepage()
because we are trying to invalidate an unlocked page.

Fixing this is a bit of a chicken and egg problem - we can't
allocate the transaction until we've clustered all the pages into
the IO and we know the size of it (i.e. whether the last block of
the IO is beyond the current EOF or not). However, we don't want to
hold pages locked for long periods of time, especially while we lock
other pages to cluster them into the write.

To fix this, we need to make a clear delineation in writeback where
errors can only be handled by IO completion processing. That is,
once we have marked a page for writeback and unlocked it, we have to
report errors via IO completion because we've already started the
IO. We may not have submitted any IO, but we've changed the page
state to indicate that it is under IO so we must now use the IO
completion path to report errors.

To do this, add an error field to xfs_submit_ioend() to pass it the
error that occurred during the building on the ioend chain. When
this is non-zero, mark each ioend with the error and call
xfs_finish_ioend() directly rather than building bios. This will
immediately push the ioends through completion processing with the
error that has occurred.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-17 09:35:42 -06:00
Dave Chinner
42e2976f13 xfs: fix attr tree double split corruption
In certain circumstances, a double split of an attribute tree is
needed to insert or replace an attribute. In rare situations, this
can go wrong, leaving the attribute tree corrupted. In this case,
the attr being replaced is the last attr in a leaf node, and the
replacement is larger so doesn't fit in the same leaf node.
When we have the initial condition of a node format attribute
btree with two leaves at index 1 and 2. Call them L1 and L2.  The
leaf L1 is completely full, there is not a single byte of free space
in it. L2 is mostly empty.  The attribute being replaced - call it X
- is the last attribute in L1.

The way an attribute replace is executed is that the replacement
attribute - call it Y - is first inserted into the tree, but has an
INCOMPLETE flag set on it so that list traversals ignore it. Once
this transaction is committed, a second transaction it run to
atomically mark Y as COMPLETE and X as INCOMPLETE, so that a
traversal will now find Y and skip X. Once that transaction is
committed, attribute X is then removed.

So, the initial condition is:

     +--------+     +--------+
     |   L1   |     |   L2   |
     | fwd: 2 |---->| fwd: 0 |
     | bwd: 0 |<----| bwd: 1 |
     | fsp: 0 |     | fsp: N |
     |--------|     |--------|
     | attr A |     | attr 1 |
     |--------|     |--------|
     | attr B |     | attr 2 |
     |--------|     |--------|
     ..........     ..........
     |--------|     |--------|
     | attr X |     | attr n |
     +--------+     +--------+

So now we go to replace X, and see that L1:fsp = 0 - it is full so
we can't insert Y in the same leaf. So we record the the location of
attribute X so we can track it for later use, then we split L1 into
L1 and L3 and reblance across the two leafs. We end with:

     +--------+     +--------+     +--------+
     |   L1   |     |   L3   |     |   L2   |
     | fwd: 3 |---->| fwd: 2 |---->| fwd: 0 |
     | bwd: 0 |<----| bwd: 1 |<----| bwd: 3 |
     | fsp: M |     | fsp: J |     | fsp: N |
     |--------|     |--------|     |--------|
     | attr A |     | attr X |     | attr 1 |
     |--------|     +--------+     |--------|
     | attr B |                    | attr 2 |
     |--------|                    |--------|
     ..........                    ..........
     |--------|                    |--------|
     | attr W |                    | attr n |
     +--------+                    +--------+

And we track that the original attribute is now at L3:0.

We then try to insert Y into L1 again, and find that there isn't
enough room because the new attribute is larger than the old one.
Hence we have to split again to make room for Y. We end up with
this:

     +--------+     +--------+     +--------+     +--------+
     |   L1   |     |   L4   |     |   L3   |     |   L2   |
     | fwd: 4 |---->| fwd: 3 |---->| fwd: 2 |---->| fwd: 0 |
     | bwd: 0 |<----| bwd: 1 |<----| bwd: 4 |<----| bwd: 3 |
     | fsp: M |     | fsp: J |     | fsp: J |     | fsp: N |
     |--------|     |--------|     |--------|     |--------|
     | attr A |     | attr Y |     | attr X |     | attr 1 |
     |--------|     + INCOMP +     +--------+     |--------|
     | attr B |     +--------+                    | attr 2 |
     |--------|                                   |--------|
     ..........                                   ..........
     |--------|                                   |--------|
     | attr W |                                   | attr n |
     +--------+                                   +--------+

And now we have the new (incomplete) attribute @ L4:0, and the
original attribute at L3:0. At this point, the first transaction is
committed, and we move to the flipping of the flags.

This is where we are supposed to end up with this:

     +--------+     +--------+     +--------+     +--------+
     |   L1   |     |   L4   |     |   L3   |     |   L2   |
     | fwd: 4 |---->| fwd: 3 |---->| fwd: 2 |---->| fwd: 0 |
     | bwd: 0 |<----| bwd: 1 |<----| bwd: 4 |<----| bwd: 3 |
     | fsp: M |     | fsp: J |     | fsp: J |     | fsp: N |
     |--------|     |--------|     |--------|     |--------|
     | attr A |     | attr Y |     | attr X |     | attr 1 |
     |--------|     +--------+     + INCOMP +     |--------|
     | attr B |                    +--------+     | attr 2 |
     |--------|                                   |--------|
     ..........                                   ..........
     |--------|                                   |--------|
     | attr W |                                   | attr n |
     +--------+                                   +--------+

But that doesn't happen properly - the attribute tracking indexes
are not pointing to the right locations. What we end up with is both
the old attribute to be removed pointing at L4:0 and the new
attribute at L4:1.  On a debug kernel, this assert fails like so:

XFS: Assertion failed: args->index2 < be16_to_cpu(leaf2->hdr.count), file: fs/xfs/xfs_attr_leaf.c, line: 2725

because the new attribute location does not exist. On a production
kernel, this goes unnoticed and the code proceeds ahead merrily and
removes L4 because it thinks that is the block that is no longer
needed. This leaves the hash index node pointing to entries
L1, L4 and L2, but only blocks L1, L3 and L2 to exist. Further, the
leaf level sibling list is L1 <-> L4 <-> L2, but L4 is now free
space, and so everything is busted. This corruption is caused by the
removal of the old attribute triggering a join - it joins everything
correctly but then frees the wrong block.

xfs_repair will report something like:

bad sibling back pointer for block 4 in attribute fork for inode 131
problem with attribute contents in inode 131
would clear attr fork
bad nblocks 8 for inode 131, would reset to 3
bad anextents 4 for inode 131, would reset to 0

The problem lies in the assignment of the old/new blocks for
tracking purposes when the double leaf split occurs. The first split
tries to place the new attribute inside the current leaf (i.e.
"inleaf == true") and moves the old attribute (X) to the new block.
This sets up the old block/index to L1:X, and newly allocated
block to L3:0. It then moves attr X to the new block and tries to
insert attr Y at the old index. That fails, so it splits again.

With the second split, the rebalance ends up placing the new attr in
the second new block - L4:0 - and this is where the code goes wrong.
What is does is it sets both the new and old block index to the
second new block. Hence it inserts attr Y at the right place (L4:0)
but overwrites the current location of the attr to replace that is
held in the new block index (currently L3:0). It over writes it with
L4:1 - the index we later assert fail on.

Hopefully this table will show this in a foramt that is a bit easier
to understand:

Split		old attr index		new attr index
		vanilla	patched		vanilla	patched
before 1st	L1:26	L1:26		N/A	N/A
after 1st	L3:0	L3:0		L1:26	L1:26
after 2nd	L4:0	L3:0		L4:1	L4:0
                ^^^^			^^^^
		wrong			wrong

The fix is surprisingly simple, for all this analysis - just stop
the rebalance on the out-of leaf case from overwriting the new attr
index - it's already correct for the double split case.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-17 09:34:13 -06:00
Hannes Reinecke
53f21a8ea1 pstore/ram: Fixup section annotations
The compiler complained about missing section annotations.
Fix it.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-16 18:42:06 -08:00
Greg Kroah-Hartman
1e619a1bf9 Merge 3.7-rc6 into tty-next 2012-11-16 18:26:00 -08:00
David Rientjes
fa0cbbf145 mm, oom: reintroduce /proc/pid/oom_adj
This is mostly a revert of 01dc52ebdf ("oom: remove deprecated oom_adj")
from Davidlohr Bueso.

It reintroduces /proc/pid/oom_adj for backwards compatibility with earlier
kernels.  It simply scales the value linearly when /proc/pid/oom_score_adj
is written.

The major difference is that its scheduled removal is no longer included
in Documentation/feature-removal-schedule.txt.  We do warn users with a
single printk, though, to suggest the more powerful and supported
/proc/pid/oom_score_adj interface.

Reported-by: Artem S. Tashkinov <t.artem@lycos.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-16 10:15:35 -08:00