Commit graph

49,973 commits

Author SHA1 Message Date
Tyler Hicks
5e6f0d7690 eCryptfs: Make truncate path killable
ecryptfs_write() handles the truncation of eCryptfs inodes. It grabs a
page, zeroes out the appropriate portions, and then encrypts the page
before writing it to the lower filesystem. It was unkillable and due to
the lack of sparse file support could result in tying up a large portion
of system resources, while encrypting pages of zeros, with no way for
the truncate operation to be stopped from userspace.

This patch adds the ability for ecryptfs_write() to detect a pending
fatal signal and return as gracefully as possible. The intent is to
leave the lower file in a useable state, while still allowing a user to
break out of the encryption loop. If a pending fatal signal is detected,
the eCryptfs inode size is updated to reflect the modified inode size
and then -EINTR is returned.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: <stable@vger.kernel.org>
2012-01-25 14:43:40 -06:00
Li Wang
684a3ff7e6 eCryptfs: Infinite loop due to overflow in ecryptfs_write()
ecryptfs_write() can enter an infinite loop when truncating a file to a
size larger than 4G. This only happens on architectures where size_t is
represented by 32 bits.

This was caused by a size_t overflow due to it incorrectly being used to
store the result of a calculation which uses potentially large values of
type loff_t.

[tyhicks@canonical.com: rewrite subject and commit message]
Signed-off-by: Li Wang <liwang@nudt.edu.cn>
Signed-off-by: Yunchuan Wen <wenyunchuan@kylinos.com.cn>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
2012-01-25 14:43:40 -06:00
Tyler Hicks
48399c0b0e eCryptfs: Replace miscdev read/write magic numbers
ecryptfs_miscdev_read() and ecryptfs_miscdev_write() contained many
magic numbers for specifying packet header field sizes and offsets. This
patch defines those values and replaces the magic values.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
2012-01-25 14:43:40 -06:00
Tyler Hicks
7f13350424 eCryptfs: Report errors in writes to /dev/ecryptfs
Errors in writes to /dev/ecryptfs were being incorrectly reported by
returning 0 or the value of the original write count.

This patch clears up the return code assignment in error paths.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
2012-01-25 14:43:39 -06:00
Tyler Hicks
db10e55651 eCryptfs: Sanitize write counts of /dev/ecryptfs
A malicious count value specified when writing to /dev/ecryptfs may
result in a a very large kernel memory allocation.

This patch peeks at the specified packet payload size, adds that to the
size of the packet headers and compares the result with the write count
value. The resulting maximum memory allocation size is approximately 532
bytes.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Cc: <stable@vger.kernel.org>
2012-01-25 14:43:39 -06:00
Tim Gardner
bb4503615d ecryptfs: Remove unnecessary variable initialization
Removes unneeded variable initialization in ecryptfs_read_metadata(). Also adds
a small comment to help explain metadata reading logic.

[tyhicks@canonical.com: Pulled out of for-stable patch and wrote commit msg]
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
2012-01-25 14:43:38 -06:00
Tim Gardner
30373dc0c8 ecryptfs: Improve metadata read failure logging
Print inode on metadata read failure. The only real
way of dealing with metadata read failures is to delete
the underlying file system file. Having the inode
allows one to 'find . -inum INODE`.

[tyhicks@canonical.com: Removed some minor not-for-stable parts]
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
2012-01-25 14:43:38 -06:00
Jan Kara
9b025eb3a8 xfs: Fix missing xfs_iunlock() on error recovery path in xfs_readlink()
Commit b52a360b forgot to call xfs_iunlock() when it detected corrupted
symplink and bailed out. Fix it by jumping to 'out' instead of doing return.

CC: stable@kernel.org
CC: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Alex Elder <elder@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-25 11:01:31 -06:00
Eric W. Biederman
fea478d410 sysctl: Add register_sysctl for normal sysctl users
The plan is to convert all callers of register_sysctl_table
and register_sysctl_paths to register_sysctl.  The interface
to register_sysctl is enough nicer this should make the callers
a bit more readable.  Additionally after the conversion the
230 lines of backwards compatibility can be removed.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:30 -08:00
Eric W. Biederman
ac13ac6f4c sysctl: Index sysctl directories with rbtrees.
One of the most important jobs of sysctl is to export network stack
tunables.  Several of those tunables are per network device.  In
several instances people are running with 1000+ network devices in
there network stacks, which makes the simple per directory linked list
in sysctl a scaling bottleneck.   Replace O(N^2) sysctl insertion and
lookup times with O(NlogN) by using an rbtree to index the sysctl
directories.

Benchmark before:
    make-dummies 0 999 -> 0.32s
    rmmod dummy        -> 0.12s
    make-dummies 0 9999 -> 1m17s
    rmmod dummy         -> 17s

Benchmark after:
    make-dummies 0 999 -> 0.074s
    rmmod dummy        -> 0.070s
    make-dummies 0 9999 -> 3.4s
    rmmod dummy         -> 0.44s

Benchmark after (without dev_snmp6):
    make-dummies 0 9999 -> 0.75s
    rmmod dummy         -> 0.44s
    make-dummies 0 99999 -> 11s
    rmmod dummy          -> 4.3s

At 10,000 dummy devices the bottleneck becomes the time to add and
remove the files under /proc/sys/net/dev_snmp6.  I have commented
out the code that adds and removes files under /proc/sys/net/dev_snmp6
and taken measurments of creating and destroying 100,000 dummies to
verify the sysctl continues to scale.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:30 -08:00
Eric W. Biederman
9e3d47df35 sysctl: Make the header lists per directory.
Slightly enhance efficiency and clarity of the code by making the
header list per directory instead of per set.

Benchmark before:
    make-dummies 0 999 -> 0.63s
    rmmod dummy        -> 0.12s
    make-dummies 0 9999 -> 2m35s
    rmmod dummy         -> 18s

Benchmark after:
    make-dummies 0 999 -> 0.32s
    rmmod dummy        -> 0.12s
    make-dummies 0 9999 -> 1m17s
    rmmod dummy         -> 17s

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:30 -08:00
Eric W. Biederman
e54012cede sysctl: Move sysctl_check_dups into insert_header
Simplify the callers of insert_header by removing explicit calls to check
for duplicates and instead have insert_header do the work.

This makes the code slightly more maintainable by enabling changes to
data structures where the insertion of new entries without duplicate
suppression is not possible.

There is not always a convenient path string where insert_header
is called so modify sysctl_check_dups to use sysctl_print_dir
when printing the full path when a duplicate is discovered.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:30 -08:00
Eric W. Biederman
60a47a2e82 sysctl: Modify __register_sysctl_paths to take a set instead of a root and an nsproxy
An nsproxy argument here has always been awkard and now the nsproxy argument
is completely unnecessary so remove it, replacing it with the set we want
the registered tables to show up in.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:30 -08:00
Eric W. Biederman
0e47c99d7f sysctl: Replace root_list with links between sysctl_table_sets.
Piecing together directories by looking first in one directory
tree, than in another directory tree and finally in a third
directory tree makes it hard to verify that some directory
entries are not multiply defined and makes it hard to create
efficient implementations the sysctl filesystem.

Replace the sysctl wide list of roots with autogenerated
links from the core sysctl directory tree to the other
sysctl directory trees.

This simplifies sysctl directory reading and lookups as now
only entries in a single sysctl directory tree need to be
considered.

Benchmark before:
    make-dummies 0 999 -> 0.44s
    rmmod dummy        -> 0.065s
    make-dummies 0 9999 -> 1m36s
    rmmod dummy         -> 0.4s

Benchmark after:
    make-dummies 0 999 -> 0.63s
    rmmod dummy        -> 0.12s
    make-dummies 0 9999 -> 2m35s
    rmmod dummy         -> 18s

The slowdown is caused by the lookups used in insert_headers
and put_links to see if we need to add links or remove links.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:29 -08:00
Eric W. Biederman
6980128fe1 sysctl: Add sysctl_print_dir and use it in get_subdir
When there are errors it is very nice to know the full sysctl path.
Add a simple function that computes the sysctl path and prints it
out.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:29 -08:00
Eric W. Biederman
7ec66d0636 sysctl: Stop requiring explicit management of sysctl directories
Simplify the code and the sysctl semantics by autogenerating
sysctl directories when a sysctl table is registered that needs
the directories and autodeleting the directories when there are
no more sysctl tables registered that need them.

Autogenerating directories keeps sysctl tables from depending
on each other, removing all of the arcane register/unregister
ordering constraints and makes it impossible to get the order
wrong when reigsering and unregistering sysctl tables.

Autogenerating directories yields one unique entity that dentries
can point to, retaining the current effective use of the dcache.

Add struct ctl_dir as the type of these new autogenerated
directories.

The attached_by and attached_to fields in ctl_table_header are
removed as they are no longer needed.

The child field in ctl_table is no longer needed by the core of
the sysctl code.  ctl_table.child can be removed once all of the
existing users have been updated.

Benchmark before:
    make-dummies 0 999 -> 0.7s
    rmmod dummy        -> 0.07s
    make-dummies 0 9999 -> 1m10s
    rmmod dummy         -> 0.4s

Benchmark after:
    make-dummies 0 999 -> 0.44s
    rmmod dummy        -> 0.065s
    make-dummies 0 9999 -> 1m36s
    rmmod dummy         -> 0.4s

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:29 -08:00
Eric W. Biederman
9eb47c26f0 sysctl: Add a root pointer to ctl_table_set
Add a ctl_table_root pointer to ctl_table set so it is easy to
go from a ctl_table_set to a ctl_table_root.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:29 -08:00
Eric W. Biederman
6a75ce167c sysctl: Rewrite proc_sys_readdir in terms of first_entry and next_entry
Replace sysctl_head_next with first_entry and next_entry.  These new
iterators operate at the level of sysctl table entries and filter
out any sysctl tables that should not be shown.

Utilizing two specialized functions instead of a single function removes
conditionals for handling awkward special cases that only come up
at the beginning of iteration, making the iterators easier to read
and understand.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:29 -08:00
Eric W. Biederman
076c3eed2c sysctl: Rewrite proc_sys_lookup introducing find_entry and lookup_entry.
Replace the helpers that proc_sys_lookup uses with helpers that work
in terms of an entire sysctl directory.  This is worse for sysctl_lock
hold times but it is much better for code clarity and the code cleanups
to come.

find_in_table is no longer needed so it is removed.

find_entry a general helper to find entries in a directory is added.

lookup_entry is a simple wrapper around find_entry that takes the
sysctl_lock increases the use count if an entry is found and drops
the sysctl_lock.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:29 -08:00
Eric W. Biederman
a194558e86 sysctl: Normalize the root_table data structure.
Every other directory has a .child member and we look at the .child
for our entries.  Do the same for the root_table.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:28 -08:00
Eric W. Biederman
8425d6aaf0 sysctl: Factor out insert_header and erase_header
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:28 -08:00
Eric W. Biederman
e0d045290a sysctl: Factor out init_header from __register_sysctl_paths
Factor out a routing to initialize the sysctl_table_header.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:28 -08:00
Eric W. Biederman
938aaa4f92 sysctl: Initial support for auto-unregistering sysctl tables.
Add nreg to ctl_table_header.  When nreg drops to 0 the ctl_table_header
will be unregistered.

Factor out drop_sysctl_table from unregister_sysctl_table, and add
the logic for decrementing nreg.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:28 -08:00
Eric W. Biederman
3cc3e04636 sysctl: A more obvious version of grab_header.
Instead of relying on sysct_head_next(NULL) to magically
return the right header for the root directory instead
explicitly transform NULL into the root directories header.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:28 -08:00
Eric W. Biederman
8d6ecfcc01 sysctl: Remove the now unused ctl_table parent field.
While useful at one time for selinux and the sysctl sanity
checks those users no longer use the parent field and we can
safely remove it.

Inspired-by: Lucian Adrian Grijincu <lucian.grijincu@gmil.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:28 -08:00
Eric W. Biederman
7c60c48f58 sysctl: Improve the sysctl sanity checks
- Stop validating subdirectories now that we only register leaf tables

- Cleanup and improve the duplicate filename check.
  * Run the duplicate filename check under the sysctl_lock to guarantee
    we never add duplicate names.
  * Reduce the duplicate filename check to nearly O(M*N) where M is the
    number of entries in tthe table we are registering and N is the
    number of entries in the directory before we got there.

- Move the duplicate filename check into it's own function and call
  it directtly from __register_sysctl_table

- Kill the config option as the sanity checks are now cheap enough
  the config option is unnecessary. The original reason for the config
  option was because we had a huge table used to verify the proc filename
  to binary sysctl mapping.  That table has now evolved into the binary_sysctl
  translation layer and is no longer part of the sysctl_check code.

- Tighten up the permission checks.  Guarnateeing that files only have read
  or write permissions.

- Removed redudant check for parents having a procname as now everything has
  a procname.

- Generalize the backtrace logic so that we print a backtrace from
  any failure of __register_sysctl_table that was not caused by
  a memmory allocation failure.  The backtrace allows us to track
  down who erroneously registered a sysctl table.

Bechmark before (CONFIG_SYSCTL_CHECK=y):
    make-dummies 0 999 -> 12s
    rmmod dummy        -> 0.08s

Bechmark before (CONFIG_SYSCTL_CHECK=n):
    make-dummies 0 999 -> 0.7s
    rmmod dummy        -> 0.06s
    make-dummies 0 99999 -> 1m13s
    rmmod dummy          -> 0.38s

Benchmark after:
    make-dummies 0 999 -> 0.65s
    rmmod dummy        -> 0.055s
    make-dummies 0 9999 -> 1m10s
    rmmod dummy         -> 0.39s

The sysctl sanity checks now impose no measurable cost.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:27 -08:00
Eric W. Biederman
f728019bb7 sysctl: register only tables of sysctl files
Split the registration of a complex ctl_table array which may have
arbitrary numbers of directories (->child != NULL) and tables of files
into a series of simpler registrations that only register tables of files.

Graphically:

   register('dir', { + file-a
                     + file-b
                     + subdir1
                       + file-c
                     + subdir2
                       + file-d
                       + file-e })

is transformed into:
   wrapper->subheaders[0] = register('dir', {file1-a, file1-b})
   wrapper->subheaders[1] = register('dir/subdir1', {file-c})
   wrapper->subheaders[2] = register('dir/subdir2', {file-d, file-e})
   return wrapper

This guarantees that __register_sysctl_table will only see a simple
ctl_table array with all entries having (->child == NULL).

Care was taken to pass the original simple ctl_table arrays to
__register_sysctl_table whenever possible.

This change is derived from a similar patch written
by Lucrian Grijincu.

Inspired-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:40:27 -08:00
Eric W. Biederman
ec6a52668d sysctl: Add ctl_table chains into cstring paths
For any component of table passed to __register_sysctl_paths
that actually serves as a path, add that to the cstring path
that is passed to __register_sysctl_table.

The result is that for most calls to __register_sysctl_paths
we only pass a table to __register_sysctl_table that contains
no child directories.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:37:55 -08:00
Eric W. Biederman
6e9d516415 sysctl: Add support for register sysctl tables with a normal cstring path.
Make __register_sysctl_table the core sysctl registration operation and
make it take a char * string as path.

Now that binary paths have been banished into the real of backwards
compatibility in kernel/binary_sysctl.c where they can be safely
ignored there is no longer a need to use struct ctl_path to represent
path names when registering ctl_tables.

Start the transition to using normal char * strings to represent
pathnames when registering sysctl tables.  Normal strings are easier
to deal with both in the internal sysctl implementation and for
programmers registering sysctl tables.

__register_sysctl_paths is turned into a backwards compatibility wrapper
that converts a ctl_path array into a normal char * string.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:37:55 -08:00
Eric W. Biederman
f05e53a7fb sysctl: Create local copies of directory names used in paths
Creating local copies of directory names is a good idea for
two reasons.
- The dynamic names used by callers must be copied into new
  strings by the callers today to ensure the strings do not
  change between register and unregister of the sysctl table.

- Sysctl directories have a potentially different lifetime
  than the time between register and unregister of any
  particular sysctl table.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:37:55 -08:00
Eric W. Biederman
bd295b56cf sysctl: Remove the unnecessary sysctl_set parent concept.
In sysctl_net register the two networking roots in the proper order.

In register_sysctl walk the sysctl sets in the reverse order of the
sysctl roots.

Remove parent from ctl_table_set and setup_sysctl_set as it is no
longer needed.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:37:55 -08:00
Eric W. Biederman
97324cd804 sysctl: Implement retire_sysctl_set
This adds a small helper retire_sysctl_set to remove the intimate knowledge about
the how a sysctl_set is implemented from net/sysct_net.c

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:37:55 -08:00
Eric W. Biederman
a15e20982e sysctl: Make the directories have nlink == 1
I goofed when I made sysctl directories have nlink == 0.
nlink == 0 means the directory has been deleted.
nlink == 1 meands a directory does not count subdirectories.

Use the default nlink == 1 for sysctl directories.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:37:55 -08:00
Eric W. Biederman
1f87f0b52b sysctl: Move the implementation into fs/proc/proc_sysctl.c
Move the core sysctl code from kernel/sysctl.c and kernel/sysctl_check.c
into fs/proc/proc_sysctl.c.

Currently sysctl maintenance is hampered by the sysctl implementation
being split across 3 files with artificial layering between them.
Consolidate the entire sysctl implementation into 1 file so that
it is easier to see what is going on and hopefully allowing for
simpler maintenance.

For functions that are now only used in fs/proc/proc_sysctl.c remove
their declarations from sysctl.h and make them static in fs/proc/proc_sysctl.c

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:37:54 -08:00
Eric W. Biederman
de4e83bd6b sysctl: Register the base sysctl table like any other sysctl table.
Simplify the code by treating the base sysctl table like any other
sysctl table and register it with register_sysctl_table.

To ensure this table is registered early enough to avoid problems
call sysctl_init from proc_sys_init.

Rename sysctl_net.c:sysctl_init() to net_sysctl_init() to avoid
name conflicts now that kernel/sysctl.c:sysctl_init() is no longer
static.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:37:54 -08:00
Lucas De Marchi
36885d7b11 sysctl: remove impossible condition check
Remove checks for conditions that will never happen. If procname is NULL
the loop would already had bailed out, so there's no need to check it
again.

At the same time this also compacts the function find_in_table() by
refactoring it to be easier to read.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-01-24 16:37:54 -08:00
Vitaly Kuznetsov
c56d8a7362 sysfs: change permissions for /sys from 0755 to 0555
There is a misleading difference between /proc and /sys permissions, /proc is 0555 and /sys is 0755. But
as it is impossible to create or unlink something in /sys it would be nice to have same permissions.

Signed-off-by: Vitaly Kuznetsov <vitty@altlinux.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24 15:57:53 -08:00
Konstantin Khlebnikov
e9aba5158a tty: rework pty count limiting
After adding devpts multiple-insrances sysctl kernel.pty.max limit pty count for
each devpts instance independently, while kernel.pty.nr shows total pty count.

This patch restores sysctl kernel.pty.max as global limit (4096 by default),
adds pty reseve for main devpts (mounted without "newinstance" argument),
and new sysctl to tune it: kernel.pty.reserve (1024 by default)

Also it adds devpts mount option "max=%d" to limit pty count for each devpts
instance independently. (by default NR_UNIX98_PTY_MAX == 2^20)

Thus devpts instances in containers cannot eat up all available pty even if we didn't
set any limits, while with "max" argument we can adjust limits more precisely.

Plus, now open("/dev/ptmx") return -ENOSPC in case lack of pty indexes,
this is more informative than -EIO.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24 14:01:01 -08:00
Konstantin Khlebnikov
a4834c102f tty: move pty count limiting into devpts
Let's move this stuff to the better place, where we can account pty right in
tty-indexes managing code.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24 14:00:41 -08:00
Eric W. Biederman
524b6c5b39 sysfs: Kill nlink counting.
Tracking the number of subdirectories requires an extra field that increases
the size of sysfs_dirent.  nlinks are not particularly interesting for sysfs
and the nlink counts are wrong when network namespaces are involved so stop
counting them, and always return nlink == 1.  Userspace already knows that
directories with nlink == 1 have an nlink count they can't use to count
subdirectories.

This reduces the size of sysfs_dirent by 8 bytes on 64bit platforms.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24 12:41:46 -08:00
Eric W. Biederman
cafa6b5dd7 sysfs: Store the sysfs inode in an unsigned int.
Store the sysfs inode number in an unsided int because
ida inode allocator can return at most a 31 bit number,
reducing the size of struct sysfs_dirent by 8 bytes
on 64bit platforms.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24 12:41:46 -08:00
Eric W. Biederman
15a3382451 sysfs: Reduce s_flags to an unsinged short so it packs well with s_mode
On 32bit this reduces sizeof(struct sysfs_dirent) by 2 bytes.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24 12:41:00 -08:00
Eric W. Biederman
4e4d6d860b sysfs: Add s_hash to sysfs_dirent and order directory entries by hash
Compute a 31 bit hash of directory entries (that can fit in a signed
32bit off_t) and index the sysfs directory entries by that hash,
replacing the per directory indexes by name and by inode.  Because we
now only use a single rbtree this reduces the size of sysfs_dirent by 2
pointers.  Because we have fewer cases to deal with the code is now
simpler.

For now I use the simple hash that the dcache uses as that is easy to
use and seems simple enough.

In addition to makeing the code simpler using a hash for the file
position in readdir brings sysfs in line with other filesystems that
have non-trivial directory structures.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24 12:36:17 -08:00
Linus Torvalds
d2346963bf Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Pass information that quota is stored in system file to userspace
  ext2: protect inode changes in the SETVERSION and SETFLAGS ioctls
  jbd: Issue cache flush after checkpointing
2012-01-24 12:12:40 -08:00
Eric W. Biederman
ce59791936 sysfs: Complain bitterly about attempts to remove files from nonexistent directories.
Recently an OOPS was observed from the usb serial io_ti driver when it tried to remove
sysfs directories.  Upon investigation it turns out this driver was always buggy
and that a recent sysfs change had stopped guarding itself against removing attributes
from sysfs directories that had already been removed. :(

Historically we have been silent about attempting to files from nonexistent sysfs
directories and have politely returned error codes.  That has resulted in people writing
broken code that ignores the error codes.

Issue a kernel WARNING and a stack backtrace to make it clear in no uncertain
terms that abusing sysfs is not ok, and the callers need to fix their code.

This change transforms the io_ti OOPS into a more comprehensible error message
and stack backtrace.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reported-by: Wolfgang Frisch <wfpub@roembden.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24 12:12:32 -08:00
Randy Dunlap
0863b04d15 kernel-doc: fix new warnings in debugfs
Fix new kernel-doc warnings:

Warning(fs/debugfs/file.c:556): No description found for parameter 'nregs'
Warning(fs/debugfs/file.c:556): Excess function parameter 'mregs' description in 'debugfs_print_regs32'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24 10:47:41 -08:00
Dan Carpenter
803ab97761 cifs: NULL dereference on allocation failure
We should just return directly here, the goto causes a NULL dereference.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-01-24 10:37:19 -06:00
Dan Magenheimer
3167760f83 mm: cleancache: s/flush/invalidate/
Per akpm suggestions alter the use of the term flush to be
invalidate. The next patch will do this across all MM.

This change is completely cosmetic.

[v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 3]

Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@novell.com>
Reviewed-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Rik Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
[v10: Fixed  fs: move code out of buffer.c conflict change]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-23 16:06:24 -05:00
Linus Torvalds
a99cbf6b43 Merge branch 'kernel-doc' from Randy Dunlap
The usual kernel-doc fixups from Randy.  Some of them David acked as
merged in his tree, this is the random left-overs.

* kernel-doc:
  docbook: fix sched source file names in device-drivers book
  docbook: change iomap source filename in deviceiobook
  docbook: don't use serial_core.h in device-drivers book
  kernel-doc: fix kernel-doc warnings in sched
  kernel-doc: fix new warnings in cfg80211.h
  kernel-doc: fix new warning in usb.h
  kernel-doc: fix new warnings in device.h
  kernel-doc: fix new warnings in debugfs
  kernel-doc: fix new warning in regulator core
  kernel-doc: fix new warnings in pci
  kernel-doc: fix new warnings in driver-core
  kernel-doc: fix new warnings in auditsc.c
  scripts/kernel-doc: fix fatal error caused by cfg80211.h
2012-01-23 10:08:08 -08:00
Linus Torvalds
4f57d865f1 Merge branch 'akpm'
Quoth Andrew:
  "Random fixes.  And a simple new LED driver which I'm trying to sneak
   in while you're not looking."

Sneaking successful.

* akpm:
  score: fix off-by-one index into syscall table
  mm: fix rss count leakage during migration
  SHM_UNLOCK: fix Unevictable pages stranded after swap
  SHM_UNLOCK: fix long unpreemptible section
  kdump: define KEXEC_NOTE_BYTES arch specific for s390x
  mm/hugetlb.c: undo change to page mapcount in fault handler
  mm: memcg: update the correct soft limit tree during migration
  proc: clear_refs: do not clear reserved pages
  drivers/video/backlight/l4f00242t03.c: return proper error in l4f00242t03_probe if regulator_get() fails
  drivers/video/backlight/adp88x0_bl.c: fix bit testing logic
  kprobes: initialize before using a hlist
  ipc/mqueue: simplify reading msgqueue limit
  leds: add led driver for Bachmann's ot200
  mm: __count_immobile_pages(): make sure the node is online
  mm: fix NULL ptr dereference in __count_immobile_pages
  mm: fix warnings regarding enum migrate_mode
2012-01-23 09:27:54 -08:00