Commit graph

691,477 commits

Author SHA1 Message Date
Guenter Roeck
245b2eecee usb: hub: Fix error loop seen after hub communication errors
While stress testing a usb controller using a bind/unbind looop, the
following error loop was observed.

usb 7-1.2: new low-speed USB device number 3 using xhci-hcd
usb 7-1.2: hub failed to enable device, error -108
usb 7-1-port2: cannot disable (err = -22)
usb 7-1-port2: couldn't allocate usb_device
usb 7-1-port2: cannot disable (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
** 57 printk messages dropped ** hub 7-1:1.0: activate --> -22
** 82 printk messages dropped ** hub 7-1:1.0: hub_ext_port_status failed (err = -22)

This continues forever. After adding tracebacks into the code,
the call sequence leading to this is found to be as follows.

[<ffffffc0007fc8e0>] hub_activate+0x368/0x7b8
[<ffffffc0007fceb4>] hub_resume+0x2c/0x3c
[<ffffffc00080b3b8>] usb_resume_interface.isra.6+0x128/0x158
[<ffffffc00080b5d0>] usb_suspend_both+0x1e8/0x288
[<ffffffc00080c9c4>] usb_runtime_suspend+0x3c/0x98
[<ffffffc0007820a0>] __rpm_callback+0x48/0x7c
[<ffffffc00078217c>] rpm_callback+0xa8/0xd4
[<ffffffc000786234>] rpm_suspend+0x84/0x758
[<ffffffc000786ca4>] rpm_idle+0x2c8/0x498
[<ffffffc000786ed4>] __pm_runtime_idle+0x60/0xac
[<ffffffc00080eba8>] usb_autopm_put_interface+0x6c/0x7c
[<ffffffc000803798>] hub_event+0x10ac/0x12ac
[<ffffffc000249bb8>] process_one_work+0x390/0x6b8
[<ffffffc00024abcc>] worker_thread+0x480/0x610
[<ffffffc000251a80>] kthread+0x164/0x178
[<ffffffc0002045d0>] ret_from_fork+0x10/0x40

kick_hub_wq() is called from hub_activate() even after failures to
communicate with the hub. This results in an endless sequence of
hub event -> hub activate -> wq trigger -> hub event -> ...

Provide two solutions for the problem.

- Only trigger the hub event queue if communication with the hub
  is successful.
- After a suspend failure, only resume already suspended interfaces
  if the communication with the device is still possible.

Each of the changes fixes the observed problem. Use both to improve
robustness.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23 08:13:22 +01:00
Gerd Hoffmann
21a60f6e65 ohci-pci: add qemu quirk
On a loaded virtualization host (dozen guests booting at the same time)
it may happen that the ohci controller emulation doesn't manage to do
timely frame processing, with the result that the io watchdog fires and
considers the controller being dead, even though it's only the emulation
being unusual slow due to the load peak.

So, add a quirk for qemu and don't use the watchdog in case we figure we
are running on emulated ohci.  The virtual ohci controller masquerades
as apple ohci controller, but we can identify it by subsystem id.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23 08:13:21 +01:00
Vincent Guittot
bc4278987e sched/fair: Fix FTQ noise bench regression
A regression of the FTQ noise has been reported by Ying Huang,
on the following hardware:

  8 threads Intel(R) Core(TM)i7-4770 CPU @ 3.40GHz with 8G memory

... which was caused by this commit:

  commit 4e5160766f ("sched/fair: Propagate asynchrous detach")

The only part of the patch that can increase the noise is the update
of blocked load of group entity in update_blocked_averages().

We can optimize this call and skip the update of group entity if its load
and utilization are already null and there is no pending propagation of load
in the task group.

This optimization partly restores the noise score. A more agressive
optimization has been tried but has shown worse score.

Reported-by: ying.huang@linux.intel.com
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: ying.huang@intel.com
Fixes: 4e5160766f ("sched/fair: Propagate asynchrous detach")
Link: http://lkml.kernel.org/r/1489758442-2877-1-git-send-email-vincent.guittot@linaro.org
[ Fixed typos, improved layout. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-23 07:44:51 +01:00
Wanpeng Li
d7921a5dda sched/core: Fix rq lock pinning warning after call balance callbacks
This can be reproduced by running rt-migrate-test:

 WARNING: CPU: 2 PID: 2195 at kernel/locking/lockdep.c:3670 lock_unpin_lock()
 unpinning an unpinned lock
 ...
 Call Trace:
  dump_stack()
  __warn()
  warn_slowpath_fmt()
  lock_unpin_lock()
  __balance_callback()
  __schedule()
  schedule()
  futex_wait_queue_me()
  futex_wait()
  do_futex()
  SyS_futex()
  do_syscall_64()
  entry_SYSCALL64_slow_path()

Revert the rq_lock_irqsave() usage here, the whole point of the
balance_callback() was to allow dropping rq->lock.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 8a8c69c327 ("sched/core: Add rq->lock wrappers")
Link: http://lkml.kernel.org/r/1489718719-3951-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-23 07:44:51 +01:00
Ingo Molnar
4ccb6aea4b Merge branch 'linus' into x86/asm, to refresh the topic tree with fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-23 07:35:15 +01:00
Peter Zijlstra
698eff6355 sched/clock, x86/perf: Fix "perf test tsc"
People reported that commit:

  5680d8094f ("sched/clock: Provide better clock continuity")

broke "perf test tsc".

That commit added another offset to the reported clock value; so
take that into account when computing the provided offset values.

Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Tested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 5680d8094f ("sched/clock: Provide better clock continuity")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-23 07:31:49 +01:00
Peter Zijlstra
71fdb70eb4 sched/clock: Fix clear_sched_clock_stable() preempt wobbly
Paul reported a problems with clear_sched_clock_stable(). Since we run
all of __clear_sched_clock_stable() from workqueue context, there's a
preempt problem.

Solve it by only running the static_key_disable() from workqueue.

Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Link: http://lkml.kernel.org/r/20170313124621.GA3328@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-23 07:31:48 +01:00
Neil Armstrong
c34cd35ed9 ARM64: dts: meson-gxbb-odroidc2: Fix TFLASH VDD regulator GPIO line
The wrong GPIO line was provided here.

Fixes: ef8d2ffedf ("ARM64: dts: meson-gxbb: add MMC support")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-03-22 20:46:52 -07:00
Neil Armstrong
b03c7d6438 ARM64: dts: meson-gxbb-odroidc2: Add GPIO lines names
This patch describes the GPIO lines usage on the Odroid-C2 board.

This is useful in the debugfs gpio file and using the cdev gpio API.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-03-22 20:46:51 -07:00
Neil Armstrong
82838e6f52 ARM64: dts: meson-gx: Add Buttons to Q200 and P230 boards
This patch adds support for the P230 and Q200 ADC laddered button and
GPIO button.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-03-22 20:46:51 -07:00
Pavel Belous
68c3865903 net:ethernet:aquantia: Fix for RX checksum offload.
Since AQC-100/107/108 chips supports hardware checksums for RX we should indicate this
via NETIF_F_RXCSUM flag.

v1->v2: 'Signed-off-by' tag added.

Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:40:52 -07:00
Lendacky, Thomas
f43feef4e6 amd-xgbe: Fix the ECC-related bit position definitions
The ECC bit positions that describe whether the ECC interrupt is for
Tx, Rx or descriptor memory and whether the it is a single correctable
or double detected error were defined in incorrectly (reversed order).
Fix the bit position definitions for these settings so that the proper
ECC handling is performed.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:39:58 -07:00
David S. Miller
4deece6c9f Merge branch 'netvsc-bug-fixes-and-cleanups'
Stephen Hemminger says:

====================
netvsc: bug fixes and cleanups

These fix NAPI issues and bugs found during testing of shutdown
testing.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:38:57 -07:00
stephen hemminger
ce12b81061 netvsc: fix and cleanup rndis_filter_set_packet_filter
Fix warning from unused set_complete variable. And rearrange code
to eliminate unnecessary goto's.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:38:57 -07:00
stephen hemminger
ebc1dcf600 netvsc: eliminate unnecessary skb == NULL checks
Since there already is a special case goto for control messages (skb == NULL)
in netvsc_send, there is no need for later checks in same code path.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:38:57 -07:00
stephen hemminger
00ecfb3b34 netvsc: remove unnecessary lock on shutdown
The channel inbound lock was not being used at all by the netvsc
device, but the spin_lock was helpful by providing necessary
barrier before waiting.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:38:56 -07:00
stephen hemminger
43c7bd1ffc netvsc: use refcount_t for keeping track of sub channels
Rather than a lock and variable, use a refcount_t to keep track
of the number of sub channels.  Don't need to wait for subchannels
on device removal since wait was already done in device_add.

Also fix the error handling; don't wait forever in case of
an error on request to create sub channels.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:38:56 -07:00
stephen hemminger
a0be450e19 netvsc: uses RCU instead of removal flag
It is cleaner to use RCU protected pointer (nvdev_ctx->nvdev)
to indicate device is in removed state, rather than having a separate
boolean flag. By using the pointer the context can be checked
by static checkers and dynamic lockdep.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:38:56 -07:00
stephen hemminger
545a8e79bd netvsc: use RCU to protect inner device structure
The netvsc driver has an internal structure (netvsc_device) which
is created when device is opened and released when device is closed.
And also opened/released when MTU or number of channels change.

Since this is referenced in the receive and transmit path, it is
safer to use RCU to protect/prevent use after free problems.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:38:56 -07:00
stephen hemminger
3071ada491 netvsc: change max channel calculation
The default number of maximum channels should be limited to the
number of cpus available on the numa node of the primary channel.
This also makes sure maximum channels <= num_online_cpus

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:38:56 -07:00
stephen hemminger
163891d7d4 netvsc: handle offline mtu and channel change
If device is not up, then changing MTU (or number of channels)
should not re-enable the device.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:38:55 -07:00
stephen hemminger
f4f1c23d6e netvsc: fix NAPI performance regression
When using NAPI, the single stream performance declined signifcantly
because the poll routine was updating host after every burst
of packets. This excess signalling caused host throttling.

This fix restores the old behavior. Host is only signalled
after the ring has been emptied.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:38:55 -07:00
VSR Burru
6069f3fbde liquidio: fix tx completions in napi poll
If there are no egress packets pending, then don't look for tx completions
in napi poll.  Also, fix broken tx queue wakeup logic.

Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:36:44 -07:00
Satanand Burla
031d4f1210 liquidio: allocate RX buffers in OOM conditions in PF and VF
Add workqueue that is periodically run to try to allocate RX buffers in OOM
conditions in PF and VF.

Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:36:43 -07:00
Philippe Reynes
3426bd7277 net: vmxnet3: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:26:52 -07:00
Philippe Reynes
ebb6b4b1ff net: virtio_net: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:26:52 -07:00
Dan Carpenter
c04ca616ee sfc: cleanup a condition in efx_udp_tunnel_del()
Presumably if there is an "add" function, there is also a "del"
function.  But it causes a static checker warning because it looks like
a common cut and paste bug.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:25:02 -07:00
Arnd Bergmann
6e9e6cc8f4 Bluetooth: btqcomsmd: fix compile-test dependency
compile-testing fails when QCOM_SMD is a loadable module:

drivers/bluetooth/built-in.o: In function `btqcomsmd_send':
btqca.c:(.text+0xa8): undefined reference to `qcom_smd_send'
drivers/bluetooth/built-in.o: In function `btqcomsmd_probe':
btqca.c:(.text+0x3ec): undefined reference to `qcom_wcnss_open_channel'
btqca.c:(.text+0x46c): undefined reference to `qcom_smd_set_drvdata'

This clarifies the dependency to allow compile-testing only when
SMD is completely disabled, otherwise the dependency on QCOM_SMD
will make sure we can link against it.

Fixes: e27ee2b16b ("Bluetooth: btqcomsmd: Allow driver to build if COMPILE_TEST is enabled")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[bjorn: Restructure and clarify dependency to QCOM_WCNSS_CTRL]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:22:04 -07:00
NeilBrown
4ad23a9764 MD: use per-cpu counter for writes_pending
The 'writes_pending' counter is used to determine when the
array is stable so that it can be marked in the superblock
as "Clean".  Consequently it needs to be updated frequently
but only checked for zero occasionally.  Recent changes to
raid5 cause the count to be updated even more often - once
per 4K rather than once per bio.  This provided
justification for making the updates more efficient.

So we replace the atomic counter a percpu-refcount.
This can be incremented and decremented cheaply most of the
time, and can be switched to "atomic" mode when more
precise counting is needed.  As it is possible for multiple
threads to want a precise count, we introduce a
"sync_checker" counter to count the number of threads
in "set_in_sync()", and only switch the refcount back
to percpu mode when that is zero.

We need to be careful about races between set_in_sync()
setting ->in_sync to 1, and md_write_start() setting it
to zero.  md_write_start() holds the rcu_read_lock()
while checking if the refcount is in percpu mode.  If
it is, then we know a switch to 'atomic' will not happen until
after we call rcu_read_unlock(), in which case set_in_sync()
will see the elevated count, and not set in_sync to 1.
If it is not in percpu mode, we take the mddev->lock to
ensure proper synchronization.

It is no longer possible to quickly check if the count is zero, which
we previously did to update a timer or to schedule the md_thread.
So now we do these every time we decrement that counter, but make
sure they are fast.

mod_timer() already optimizes the case where the timeout value doesn't
actually change.  We leverage that further by always rounding off the
jiffies to the timeout value.  This may delay the marking of 'clean'
slightly, but ensure we only perform atomic operation here when absolutely
needed.

md_wakeup_thread() current always calls wake_up(), even if
THREAD_WAKEUP is already set.  That too can be optimised to avoid
calls to wake_up().

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:18:56 -07:00
NeilBrown
210f7cdcf0 percpu-refcount: support synchronous switch to atomic mode.
percpu_ref_switch_to_atomic_sync() schedules the switch to atomic mode, then
waits for it to complete.

Also export percpu_ref_switch_to_* so they can be used from modules.

This will be used in md/raid to count the number of pending write
requests to an array.
We occasionally need to check if the count is zero, but most often
we don't care.
We always want updates to the counter to be fast, as in some cases
we count every 4K page.

Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:18:43 -07:00
NeilBrown
55cc39f345 md: close a race with setting mddev->in_sync
If ->in_sync is being set just as md_write_start() is being called,
it is possible that set_in_sync() won't see the elevated
->writes_pending, and md_write_start() won't see the set ->in_sync.

To close this race, re-test ->writes_pending after setting ->in_sync,
and add memory barriers to ensure the increment of ->writes_pending
will be seen by the time of this second test, or the new ->in_sync
will be seen by md_write_start().

Add a spinlock to array_state_show() to ensure this temporary
instability is never visible from userspace.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:18:30 -07:00
NeilBrown
6497709b5d md: factor out set_in_sync()
Three separate places in md.c check if the number of active
writes is zero and, if so, sets mddev->in_sync.

There are a few differences, but there shouldn't be:
- it is always appropriate to notify the change in
  sysfs_state, and there is no need to do this outside a
  spin-locked region.
- we never need to check ->recovery_cp.  The state of resync
  is not relevant for whether there are any pending writes
  or not (which is what ->in_sync reports).

So create set_in_sync() which does the correct tests and
makes the correct changes, and call this in all three
places.

Any behaviour changes here a minor and cosmetic.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:18:18 -07:00
NeilBrown
84dd97a690 md/raid5: don't test ->writes_pending in raid5_remove_disk
This test on ->writes_pending cannot be safe as the counter
can be incremented at any moment and cannot be locked against.

Change it to test conf->active_stripes, which at least
can be locked against.  More changes are still needed.

A future patch will change ->writes_pending, and testing it here will
be very inconvenient.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:18:05 -07:00
NeilBrown
37011e3afb md/raid1: stop using bi_phys_segment
Change to use bio->__bi_remaining to count number of r1bio attached
to a bio.
See precious raid10 patch for more details.

Like the raid10.c patch, this fixes a bug as nr_queued and nr_pending
used to measure different things, but were being compared.

This patch fixes another bug in that nr_pending previously did not
could write-behind requests, so behind writes could continue while
resync was happening.  How that nr_pending counts all r1_bio,
the resync cannot commence until the behind writes have completed.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:17:53 -07:00
NeilBrown
fd16f2e848 md/raid10: stop using bi_phys_segments
raid10 currently repurposes bi_phys_segments on each
incoming bio to count how many r10bio was used to encode the
request.

We need to know when the number of attached r10bio reaches
zero to:
1/ call bio_endio() when all IO on the bio is finished
2/ decrement ->nr_pending so that resync IO can proceed.

Now that the bio has its own __bi_remaining counter, that
can be used instead. We can call bio_inc_remaining to
increment the counter and call bio_endio() every time an
r10bio completes, rather than only when bi_phys_segments
reaches zero.

This addresses point 1, but not point 2.  bio_endio()
doesn't (and cannot) report when the last r10bio has
finished, so a different approach is needed.

So: instead of counting bios in ->nr_pending, count r10bios.
i.e. every time we attach a bio, increment nr_pending.
Every time an r10bio completes, decrement nr_pending.

Normally we only increment nr_pending after first checking
that ->barrier is zero, or some other non-trivial tests and
possible waiting.  When attaching multiple r10bios to a bio,
we only need the tests and the waiting once.  After the
first increment, subsequent increments can happen
unconditionally as they are really all part of the one
request.

So introduce inc_pending() which can be used when we know
that nr_pending is already elevated.

Note that this fixes a bug.  freeze_array() contains the line
	atomic_read(&conf->nr_pending) == conf->nr_queued+extra,
which implies that the units for ->nr_pending, ->nr_queued and extra
are the same.
->nr_queue and extra count r10_bios, but prior to this patch,
->nr_pending counted bios.  If a bio ever resulted in multiple
r10_bios (due to bad blocks), freeze_array() would not work correctly.
Now it does.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:17:41 -07:00
NeilBrown
6b6c8110e1 md/raid1, raid10: move rXbio accounting closer to allocation.
When raid1 or raid10 find they will need to allocate a new
r1bio/r10bio, in order to work around a known bad block, they
account for the allocation well before the allocation is
made.  This separation makes the correctness less obvious
and requires comments.

The accounting needs to be a little before: before the first
rXbio is submitted, but that is all.

So move the accounting down to where it makes more sense.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:17:24 -07:00
David S. Miller
b5bacf86b6 Merge branch 'xgene-v2-mdio-and-ethtool'
Iyappan Subramanian says:

====================
drivers: net: xgene-v2: Add MDIO and ethtool support

This patch set,

- adds phy management and ethtool support
- fixes ethernet reset
- addresses review comments from previous patch set

v2: Address review comments from v1
	- removed mdio_lock, since there is a top level lock in mdio_bus.c

v1:
	- Initial version
====================

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:17:15 -07:00
Iyappan Subramanian
1ffa8a7aa5 drivers: net: xgene-v2: misc fixes
Fixed review comments from the previous patch-set.

- changed return value check of platform_get_irq() to < 0
- replaced devm_request(free)_irq() calls by request(free)_irq() since
  they are called from open() and close()
- changed sizeof(struct mystruct) to sizeof(*mystruct)
- reduced indentation on tx_timeout()

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:17:14 -07:00
Iyappan Subramanian
b2180a8f28 drivers: net: xgene-v2: Fix port reset
Fixed port reset sequence by adding ECC init.

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:17:14 -07:00
Iyappan Subramanian
617d795c7c drivers: net: xgene-v2: Add ethtool support
Added basic ethtool support.

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:17:14 -07:00
Iyappan Subramanian
ea8ab16ab2 drivers: net: xgene-v2: Add MDIO support
Added phy management support by using phy abstraction layer APIs.

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 19:17:13 -07:00
NeilBrown
97d5343808 Revert "md/raid5: limit request size according to implementation limits"
This reverts commit e8d7c33232.

Now that raid5 doesn't abuse bi_phys_segments any more, we no longer
need to impose these limits.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:17:12 -07:00
Christoph Hellwig
a4d907b6a3 blk-mq: streamline blk_mq_make_request
Turn the different ways of merging or issuing I/O into a series of if/else
statements instead of the current maze of gotos.  Note that this means we
pin the CPU a little longer for some cases as the CTX put is moved to
common code at the end of the function.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-22 20:17:03 -06:00
Christoph Hellwig
2299722c4b blk-mq: split the plug and sync cases in blk_mq_make_request
Now that we have a nice direct issue heper this helps simplifying
the code a bit, and also gets rid of the old_rq variable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-22 20:17:01 -06:00
Christoph Hellwig
5eb6126e1c blk-mq: improve blk_mq_try_issue_directly
Rename blk_mq_try_issue_directly to __blk_mq_try_issue_directly and add a
new wrapper that takes care of RCU / SRCU locking to avoid having
boileplate code in the caller which would get duplicated with new callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-22 20:16:59 -06:00
Christoph Hellwig
254d259da0 blk-mq: merge mq and sq make_request instances
They are mostly the same code anyway - this just one small conditional
for the plug case that is different for both variants.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-22 20:16:58 -06:00
NeilBrown
0472a42ba1 md/raid5: remove over-loading of ->bi_phys_segments.
When a read request, which bypassed the cache, fails, we need to retry
it through the cache.
This involves attaching it to a sequence of stripe_heads, and it may not
be possible to get all the stripe_heads we need at once.
We do what we can, and record how far we got in ->bi_phys_segments so
we can pick up again later.

There is only ever one bio which may have a non-zero offset stored in
->bi_phys_segments, the one that is either active in the single thread
which calls retry_aligned_read(), or is in conf->retry_read_aligned
waiting for retry_aligned_read() to be called again.

So we only need to store one offset value.  This can be in a local
variable passed between remove_bio_from_retry() and
retry_aligned_read(), or in the r5conf structure next to the
->retry_read_aligned pointer.

Storing it there allows the last usage of ->bi_phys_segments to be
removed from md/raid5.c.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:16:56 -07:00
Christoph Hellwig
7642747d67 blk-mq: remove BLK_MQ_F_DEFER_ISSUE
This flag was never used since it was introduced.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-22 20:16:56 -06:00
NeilBrown
016c76ac76 md/raid5: use bio_inc_remaining() instead of repurposing bi_phys_segments as a counter
md/raid5 needs to keep track of how many stripe_heads are processing a
bio so that it can delay calling bio_endio() until all stripe_heads
have completed.  It currently uses 16 bits of ->bi_phys_segments for
this purpose.

16 bits is only enough for 256M requests, and it is possible for a
single bio to be larger than this, which causes problems.  Also, the
bio struct contains a larger counter, __bi_remaining, which has a
purpose very similar to the purpose of our counter.  So stop using
->bi_phys_segments, and instead use __bi_remaining.

This means we don't need to initialize the counter, as our caller
initializes it to '1'.  It also means we can call bio_endio() directly
as it tests this counter internally.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:16:30 -07:00
NeilBrown
bd83d0a28c md/raid5: call bio_endio() directly rather than queueing for later.
We currently gather bios that need to be returned into a bio_list
and call bio_endio() on them all together.
The original reason for this was to avoid making the calls while
holding a spinlock.
Locking has changed a lot since then, and that reason is no longer
valid.

So discard return_io() and various return_bi lists, and just call
bio_endio() directly as needed.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-22 19:16:12 -07:00