Commit graph

691,477 commits

Author SHA1 Message Date
Linus Torvalds
5ab356626f Pin control bulk changes for the v4.11 kernel cycle:
Core changes:
 
 - Switch the generic pin config argument from 16 to 24 bits,
   only use 8 bits for the configuration type. We might need to
   encode more information about a certain setting than we need
   to encode different generic settings.
 
 - Add a cross-talk API to the pin control GPIO back-end,
   utilizing pinctrl_gpio_set_config() from GPIO drivers that
   want to set up a certain pin configuration in the back-end.
   This also includes the .set_config() refactoring of the
   GPIO chips, so that they pass a generic configuration for
   things like debouncing and single ended (typically open
   drain). This change has also been merged in an immutable
   branch to the GPIO tree.
 
 - Take hogs with a delayed work, so that we finalize probing
   a pin controller before trying to get any hogs.
 
 - For pin controllers putting all group and function definitions
   into the device tree, we now have generic code to deal with
   this and it is used in two drivers so far.
 
 - Simplifications of the pin request conflict check.
 
 - Make dt_free_map() optional.
 
 Updates to drivers:
 
 - pinctrl-single now use the generic helpers to generate dynamic
   group and function tables from the device tree.
 
 - Texas Instruments IOdelay configuration driver add-on to
   pinctrl-single.
 
 - i.MX: use radix trees to store groups and functions, use the new
   generic group and function helpers to manage them.
 
 - Intel: add support for hardware debouncing and 1K pull-down.
   New subdriver for the Gemini Lake SoC.
 
 - Renesas SH-PFC: drive strength and bias support, CAN bus muxing,
   MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791.
 
 - Aspeed: use syscon cross-dependencies to set up related bits in
   the LPC host controller and display controller.
 
 - Aspeed: finalize G4 and G5 support. Fix mux configuration on
   GPIOs. Add banks Y, Z, AA, AB and AC.
 
 - AMD: support additional GPIO.
 
 - STM32: set this controller to strict muxing mode.
   STM32H743 MCU support.
 
 - Allwinner sunxi: deep simplifications on how to support
   subvariants of SoCs without adding to much SoC-specific data
   for each subvariant, especially for sun5i variants. New driver
   for V3s SoCs. New driver for the H5 SoC. Support A31/A31s
   variants with the new variant framework.
 
 - Mvebu: simplifications to use a MMIO and regmap abstraction.
   New subdrivers for the 98DX3236, 98DX5241 SoCs.
 
 - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the
   SoC driver to access regmaps. Add infrastructure for pin-bank
   retention control. Clean out the pin retention control from
   arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly
   in the Samsung pin control driver(s).
 
 - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin.
 
 - Qualcomm: use raw spinlock variants: this makes the qualcomm
   driver realtime-safe.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYq/7kAAoJEEEQszewGV1zf4oQALVaN5tuaCbzN4QOq87jzXmk
 K195kKG0nkNvN6o5llNhBszHfCSmX1+oSscxuCF/88kH4mFHeDIbvg0KOk5IZYxA
 YlT8NA75C9+flARE3gQUyL320ulahWbvOthntQprzsVU4RJa0zP38peQsfiUd8W1
 ch8GInJYYkczcsAbmziyUOBu5a2o9tX3u8BF8FaBf2uyrCiBC/ZT2VpzvbOR5NeU
 MvjFvc7bq2fNltzDNHdZZUo/5iCbnPlRNig2umDp5fFa8rZcdPmGMAOl4p6nizHY
 S16xDl38xxDQx8sp1IH4n+th3G2cXoONEj9eZ6woWTJhLbLc13CacYPfleYfqEOe
 +JyrUgBgFBINiFWDHHaebWJeD2M/QF4FnSDGnnJBy/bKWe6lJnknGvSZNcIEvdvB
 QeeKyfrvnKiCyjNY4N+ZNdMLA2vj5o86vG2hSqztPiwYWDePbN76yeZ7l79bFfOo
 ZnCa2ay70Np7xwrQWors4Gl2LV2zJG7AkaNA7vvS9NX6OURu/SkNVePkY1XHCLwu
 lNvYd4iwFJxzXm08TsgtLC080eZfvCot9xqbgzvoapnwx7tBuaAakXI4bh0T3x4n
 pEauKO3oNE/K89mN9QK2jfsD9kDWvm4xvc+ilA6DGU0C37XnDQjF+Q5xy16262Gh
 9w0yWMlqzrr7stUXAjS4
 =IMY0
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Pin control bulk changes for the v4.11 kernel cycle.

  Core changes:

   - Switch the generic pin config argument from 16 to 24 bits, only use
     8 bits for the configuration type. We might need to encode more
     information about a certain setting than we need to encode
     different generic settings.

   - Add a cross-talk API to the pin control GPIO back-end, utilizing
     pinctrl_gpio_set_config() from GPIO drivers that want to set up a
     certain pin configuration in the back-end.

     This also includes the .set_config() refactoring of the GPIO chips,
     so that they pass a generic configuration for things like
     debouncing and single ended (typically open drain). This change has
     also been merged in an immutable branch to the GPIO tree.

   - Take hogs with a delayed work, so that we finalize probing a pin
     controller before trying to get any hogs.

   - For pin controllers putting all group and function definitions into
     the device tree, we now have generic code to deal with this and it
     is used in two drivers so far.

   - Simplifications of the pin request conflict check.

   - Make dt_free_map() optional.

  Updates to drivers:

   - pinctrl-single now use the generic helpers to generate dynamic
     group and function tables from the device tree.

   - Texas Instruments IOdelay configuration driver add-on to
     pinctrl-single.

   - i.MX: use radix trees to store groups and functions, use the new
     generic group and function helpers to manage them.

   - Intel: add support for hardware debouncing and 1K pull-down. New
     subdriver for the Gemini Lake SoC.

   - Renesas SH-PFC: drive strength and bias support, CAN bus muxing,
     MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791.

   - Aspeed: use syscon cross-dependencies to set up related bits in the
     LPC host controller and display controller.

   - Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs.
     Add banks Y, Z, AA, AB and AC.

   - AMD: support additional GPIO.

   - STM32: set this controller to strict muxing mode. STM32H743 MCU
     support.

   - Allwinner sunxi: deep simplifications on how to support subvariants
     of SoCs without adding to much SoC-specific data for each
     subvariant, especially for sun5i variants. New driver for V3s SoCs.
     New driver for the H5 SoC. Support A31/A31s variants with the new
     variant framework.

   - Mvebu: simplifications to use a MMIO and regmap abstraction. New
     subdrivers for the 98DX3236, 98DX5241 SoCs.

   - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC
     driver to access regmaps. Add infrastructure for pin-bank retention
     control. Clean out the pin retention control from
     arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in
     the Samsung pin control driver(s).

   - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin.

   - Qualcomm: use raw spinlock variants: this makes the qualcomm driver
     realtime-safe"

* tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits)
  pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()
  pinctrl: intel: unlock on error in intel_config_set_pull()
  pinctrl: berlin: make bool drivers explicitly non-modular
  pinctrl: spear: make bool drivers explicitly non-modular
  pinctrl: mvebu: make bool drivers explicitly non-modular
  pinctrl: sunxi: make sun5i explicitly non-modular
  pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function
  pinctrl: samsung: mark PM functions as __maybe_unused
  pinctrl: sunxi: Remove redundant A31s pinctrl driver
  pinctrl: sunxi: Support A31/A31s with pinctrl variants
  pinctrl: Amend bindings for STM32 pinctrl
  pinctrl: Add STM32 pinctrl driver DT bindings
  pinctrl: stm32: Add STM32H743 MCU support
  include: dt-bindings: Add STM32H7 pinctrl DT defines
  gpio: aspeed: Remove dependence on GPIOF_* macros
  pinctrl: stm32: fix bad location of gpiochip_lock_as_irq
  drivers: pinctrl: add driver for Allwinner H5 SoC
  pinctrl: intel: Add Intel Gemini Lake pin controller support
  pinctrl: intel: Add support for 1k additional pull-down
  pinctrl: intel: Add support for hardware debouncer
  ...
2017-02-21 16:34:22 -08:00
Jonas Gorski
ccd0657c33 spi/bcm63xx: fix typo in bcm63xx_spi_max_length breaking compilation
Fix compilation by renaming argument dev to spi as expected by the code.

Fixes the following error:

drivers/spi/spi-bcm63xx.c: In function ‘bcm63xx_spi_max_length’:
drivers/spi/spi-bcm63xx.c:434:50: error: ‘spi’ undeclared (first use in this function)
  struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
                                                  ^~~

Fixes: 0135c03df9 ("spi/bcm63xx: make spi subsystem aware of message size limits")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-21 16:25:48 -08:00
Jiri Kosina
2fa299a917 HID: rmi: fallback to generic/multitouch if hid-rmi is not built
Commit 279967a65b ("HID: rmi: Handle all Synaptics touchpads using hid-rmi")
unconditionally switches over handling of all Synaptics touchpads to hid-rmi
(to make use of extended features of the HW); in case CONFIG_HID_RMI is
disabled though this renders the touchpad unusable, as the

	HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID)

match doesn't exist and generic/multitouch doesn't bind to it either (due
to hid group mismatch).

Fix this by switching over to hid-rmi only if it has been actually built.

Fixes: 279967a65b ("HID: rmi: Handle all Synaptics touchpads using hid-rmi")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-22 01:13:52 +01:00
Baoyou Xie
870e0ddc43 ASoC: zx-tdm: add zte's tdm controller driver
This patch adds tdm controller driver for zte's SoC family.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-21 15:11:17 -08:00
Baoyou Xie
5949dae3a4 ASoC: zx-tdm: add bindings doc for zte's tdm controller
This patch adds dt-binding documentation for zte's tdm controller.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-21 15:11:13 -08:00
Jonas Gorski
54e43b6085 spi/bcm63xx: document bcm63xx SPI devicetree bindings
Add documentation for the bindings of the low speed SPI controller found
on most bcm63xx SoCs.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-21 15:04:15 -08:00
Jonas Gorski
c29f08890a spi/bcm63xx: allow for probing through devicetree
Add required binding support to probe through device tree.

Use the compatible instead of the resource size for identifiying the
block type, and allow reducing the number of cs lines through OF.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-21 15:04:14 -08:00
Arnd Bergmann
72cedf599f ASoC: mediatek: add I2C dependency for CS42XX8
We should not select drivers that depend on I2C when that is disabled,
as it results in a build error:

warning: (SND_SOC_MT2701_CS42448) selects SND_SOC_CS42XX8_I2C which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC && I2C)
sound/soc/codecs/cs42xx8-i2c.c:60:1: warning: data definition has no type or storage class
 module_i2c_driver(cs42xx8_i2c_driver);
sound/soc/codecs/cs42xx8-i2c.c:60:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int]

Fixes: 1f458d53f7 ("ASoC: mediatek: Add mt2701-cs42448 driver and config option.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-21 15:02:34 -08:00
Arnd Bergmann
4b49f0f7ee ALSA: x86: hdmi: select CONFIG_SND_PCM
The newly added driver uses the PCM helpers and fails to link if they are disabled:

sound/built-in.o: In function `hdmi_lpe_audio_runtime_suspend':
intel_hdmi_audio.c:(.text+0x15906): undefined reference to `snd_pcm_suspend'
sound/built-in.o: In function `had_pcm_hw_params':
intel_hdmi_audio.c:(.text+0x15ac7): undefined reference to `snd_pcm_lib_malloc_pages'
sound/built-in.o: In function `had_pcm_open':
intel_hdmi_audio.c:(.text+0x15d49): undefined reference to `snd_pcm_hw_constraint_integer'

This uses a Kconfig 'select' statement to make sure they are enabled.

Fixes: 5dab11d897 ("ALSA: x86: hdmi: Add audio support for BYT and CHT")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-21 23:39:14 +01:00
Linus Torvalds
6d1c42d9b9 Final extable.h related changes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYrFn+AAoJEOvOhAQsB9HWbDAP/i1bMxYJSnwD2D/PBvzpY2AW
 uinEigaRr6kpRCOfa9FrfgxokKfosZOx5h7Se3f6O3mPwgpsU+dqbaE18Z5XSgxh
 +a9+HvAv3/XNZg7SvBtBaoYDblHWJ6AJ9rN9fuKg3e8btE3rSFG147vj1atlVz1+
 iRsXcCPb1p5db2+wZdsYJPI5Zwt4N0nR6cxPX4RQ6jseiVqPpt/FDtB60RYCjbID
 J0cOk1VV1Jn2H1Rfl+hjNQjIPMNx3zftOLQ2usr/kwuEqeuTKZR06yLXFOT6bdXU
 6JBdfL+e2kHKbaLyJGr6MCjTokaMgN3SGZJWJqHgk5Nggq5BD+2c4AOs8t6URnE0
 KThGiyY+YI5C/W6kMlEozLARiMKe4IIQpx1uj2Hv+YkndntvqjCqvfdQQJKnzm0G
 YWfPnsG2dysiovwEOBoBwyFVFLFzzJ1o3uyRGkCzVGaLQVzD5ktAJM6ynMOxwcIn
 zSN+agzdTAD7QJIDaa1p2r5fAqy7i4xIn2+ts1s9c410fdUTB4A2QJzTywjPAdCp
 IRxcLLpYDeBZ5cbhqjR677WgPtteYFTljoX+/8BOFO2PI+HjKHrxfW02WSiCS0iu
 CUndrlpmuyKlIrpw7mYpDTbORcSQSiUkB1pRGT7poh2p0KKAGSo9ZrRbx+qRvPdH
 AxO+ZR6Jjj5LAMk5MkRz
 =RK2h
 -----END PGP SIGNATURE-----

Merge tag 'extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull exception table module split from Paul Gortmaker:
 "Final extable.h related changes.

  This completes the separation of exception table content from the
  module.h header file. This is achieved with the final commit that
  removes the one line back compatible change that sourced extable.h
  into the module.h file.

  The commits are unchanged since January, with the exception of a
  couple Acks that came in for the last two commits a bit later. The
  changes have been in linux-next for quite some time[1] and have got
  widespread arch coverage via toolchains I have and also from
  additional ones the kbuild bot has.

  Maintaners of the various arch were Cc'd during the postings to
  lkml[2] and informed that the intention was to take the remaining arch
  specific changes and lump them together with the final two non-arch
  specific changes and submit for this merge window.

  The ia64 diffstat stands out and probably warrants a mention. In an
  earlier review, Al Viro made a valid comment that the original header
  separation of content left something to be desired, and that it get
  fixed as a part of this change, hence the larger diffstat"

* tag 'extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (21 commits)
  module.h: remove extable.h include now users have migrated
  core: migrate exception table users off module.h and onto extable.h
  cris: migrate exception table users off module.h and onto extable.h
  hexagon: migrate exception table users off module.h and onto extable.h
  microblaze: migrate exception table users off module.h and onto extable.h
  unicore32: migrate exception table users off module.h and onto extable.h
  score: migrate exception table users off module.h and onto extable.h
  metag: migrate exception table users off module.h and onto extable.h
  arc: migrate exception table users off module.h and onto extable.h
  nios2: migrate exception table users off module.h and onto extable.h
  sparc: migrate exception table users onto extable.h
  openrisc: migrate exception table users off module.h and onto extable.h
  frv: migrate exception table users off module.h and onto extable.h
  sh: migrate exception table users off module.h and onto extable.h
  xtensa: migrate exception table users off module.h and onto extable.h
  mn10300: migrate exception table users off module.h and onto extable.h
  alpha: migrate exception table users off module.h and onto extable.h
  arm: migrate exception table users off module.h and onto extable.h
  m32r: migrate exception table users off module.h and onto extable.h
  ia64: ensure exception table search users include extable.h
  ...
2017-02-21 14:28:55 -08:00
Gregory CLEMENT
34f54f579a rtc: armada38x: Add support for Armada 7K/8K
The Armada 7K/8K use the same RTC IP than the Armada 38x. However the SOC
integration differs in 2 points:
 - MBUS bridge timing initialization
 - IRQ configuration at SoC level

Moreover the Armada 7K/8K have an issue preventing to get the interrupt
from alarm 1. This commit allows to use alarm 2 for these A7K/8K but to
still use alarm 1 for the Armada 38x.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-21 23:21:30 +01:00
Gregory CLEMENT
75faea9179 rtc: armada38x: Prepare driver to manage different versions
In order to prepare the introduction of the A7K/A8K version of the RTC,
this commit introduces a new data structure. This structure allows to
handle the differences between the integration of the RTC IP in the
SoCs. It will be:
 - MBUS bridge timing initialization
 - IRQ configuration at SoC level

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-21 23:21:28 +01:00
Linus Torvalds
0f002fddbe MIPS changes for v4.11
Miscellaneous:
  - Add IRQ stacks
  - Add cacheinfo support
  - Add "uzImage.bin" zboot target
  - Unify performance counter definitions
  - Export various (mainly assembly) symbols alongside their
    definitions
  - Audit and remove unnecessary uses of module.h
 
 kexec & kdump:
  - Lots of improvements and fixes
  - Add correct copy_regs implementations
  - Add debug logging of new kernel information
 
 Security:
  - Use Makefile.postlink to insert relocations into vmlinux
  - Provide plat_post_relocation hook (used for Octeon KASLR)
  - Add support for tuning mmap randomisation
  - Relocate DTB
 
 microMIPS:
  - A load of unwind fixes
  - Add some missing .insn to fix link errors
 
 MIPSr6:
  - Fix MULTU/MADDU/MSUBU sign extension in r2 emulation
  - Remove r2_emul_return and use ERETNC unconditionally on MIPSr6
  - Allow pre-r6 emulation on SMP MIPSr6 kernels
 
 Cache management:
  - Treat physically indexed dcache as non-aliasing
  - Add return errors to protected cache ops for KVM
  - CM3: Ensure L1 & L2 cache ECC checking matches
  - CM3: Indicate inclusive caches
  - I6400: Treat dcache as physically indexed
 
 Memory management:
  - Ensure bootmem doesn't corrupt reserved memory
  - Export some TLB exception generation functions for KVM
 
 OF
  - NULL check initial_boot_params before use in of_scan_flat_dt()
  - Fix unaligned access in of_alias_scan()
 
 SMP:
  - CPS: Don't BUG if a CPU fails to start
 
 Other fixes
  - Fix longstanding 64-bit IP checksum carry bug
  - Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c
  - Update defconfigs for NF_CT_PROTO_DCCP, DPLITE,
    CPU_FREQ_STAT,SCSI_DH changes
  - Disable certain builtin compiler options, stack-check (whole
    kernel), asynchronous-unwind-tables (VDSO).
  - A bunch of build fixes from kernelci.org testing
  - Various other minor cleanups & corrections
 
 BMIPS:
  - Migrate interrupts during bmips_cpu_disable
  - BCM47xx: Add Luxul devices
  - BCM47xx: Fix Asus WL-500W button inversion
  - BCM7xxx: Add SPI device nodes
 
 Generic (multiplatform):
  - Add kexec DTB passing
  - Fix big endian
  - Add cpp_its_S in ksym_dep_filter to silence build warning
 
 IP22:
  - Reformat inline assembler code to modern standards
  - Fix binutils 2.25 build error
 
 IP27:
  - Fix duplicate CAC_BASE definition build error
  - Disable qlge driver to workaround broken compiler
 
 Lantiq:
  - Refresh defconfig and activate more drivers
  - Lock DMA register access
  - Fix cascading IRQ setup
  - Fix build of VPE loader
  - xway: Fix ethernet packet header corruption over reboot
 
 Loongson1
  - Add watchdog support
  - 1B: Reduce DEFAULT_MEMSIZE to 64MB
  - 1B: Change OSC clock name to match rest of kernel
  - 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB
 
 Octeon:
  - Add KASLR support
  - Support Octeon III USB controller
  - Fix large copy_from_user corner case
  - Enable devtmpfs in defconfig
 
 Netlogic:
  - Fix non-default XLR build error due to netlogic,xlp-pic code
  - Fix assembler warning from smpboot.S
 
 pic32mzda:
  - Fix linker error when early printk is disabled
 
 Pistachio:
  - Add base device tree
  - Add Ci40 "Marduk" device tree
 
 Ralink:
  - Support raw appended DTB
  - Add missing I2C & I2S clocks
  - Add missing pinmux and fix pinmux function name typo
  - Add missing clk_round_rate()
  - Clean up prom_init()
  - MT7621: Set SoC type
  - MT7621: Support highmem
 
 TXx9:
  - Modernize printing of kernel messages and resolve KERN_CONT fallout
  - 7segled: use permission-specific DEVICE_ATTR variants
 
 XilFPGA:
  - Add IRQ controller and UART IRQ
  - Add AXI I2C and emaclite to DT & defconfig
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJYp6EBAAoJEGwLaZPeOHZ6HdMQAJTaWMET5SFuERSQKi6xsgRp
 +ZQ8eHWG6AlERXw56EOuo69qEKvvTWfYR8cBZmePxbrP0cBREcT7Thz8oX4q4IGs
 ZT3jCLmHb4dSu4Pp5nAVVPb7XaJ6InJr/5V88jGECO+zvdIlsoOj8e13gypl0hsw
 gxEiYHp3kSHVeBTmiCo5KasWtY36vkpl0CVfFIHVXQQulHPWdYGSamdhyCVHWvJc
 l1fGJPi9f5KEJO6ys6bZUCPQGnpj09d3muw2FR0SA7i1M4TWw5t6HU6yt81mgxQD
 TJH/lRKmDkfbv+2sOlz2NSHyilyuApY3dlN8BQX7eG4UFsvbZnZhAvGQTfZzelku
 6pJXYHdeZOlYFDHFfZRKyT6cOnIZNqWlcoouds1GoHQZaUUNlGfVRVzJ1KGJoHa4
 vBCIXOUb4KCCc1ylykzWeCOOalPlNVKxDn9vIBrhtld1CbgRaOzUFFlU8YJkYACB
 k5W0XqFA2tth7cttLIc7H/VJUHwHfaVUwNbbNUWDKiUOrLtpIGtfNh2EPrFPHPA8
 N7gsQ5gDDiASVHcreEnMqOQLdFpciFLTo0kXC9zXT4a9Q5fD0ILC02xzJCqCXRlG
 KgJBBOfIavug9ZQO3vAaz8AyMNe+XCeMdJf+ZtEMnuuk4CqxRBixxu37fXEPv/hX
 QUNLUk3kqV2yJPrkhFqJ
 =maZx
 -----END PGP SIGNATURE-----

Merge tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

Pull MIPS updates from James Hogan:
 "Here's the main MIPS pull request for 4.11.

  It contains a few new features such as IRQ stacks, cacheinfo support,
  and KASLR for Octeon CPUs, and a variety of smaller improvements and
  fixes including devicetree additions, kexec cleanups, microMIPS stack
  unwinding fixes, and a bunch of build fixes to clean up continuous
  integration builds.

  Its all been in linux-next for at least a couple of days, most of it
  far longer.

  Miscellaneous:
   - Add IRQ stacks
   - Add cacheinfo support
   - Add "uzImage.bin" zboot target
   - Unify performance counter definitions
   - Export various (mainly assembly) symbols alongside their
     definitions
   - Audit and remove unnecessary uses of module.h

  kexec & kdump:
   - Lots of improvements and fixes
   - Add correct copy_regs implementations
   - Add debug logging of new kernel information

  Security:
   - Use Makefile.postlink to insert relocations into vmlinux
   - Provide plat_post_relocation hook (used for Octeon KASLR)
   - Add support for tuning mmap randomisation
   - Relocate DTB

  microMIPS:
   - A load of unwind fixes
   - Add some missing .insn to fix link errors

  MIPSr6:
   - Fix MULTU/MADDU/MSUBU sign extension in r2 emulation
   - Remove r2_emul_return and use ERETNC unconditionally on MIPSr6
   - Allow pre-r6 emulation on SMP MIPSr6 kernels

  Cache management:
   - Treat physically indexed dcache as non-aliasing
   - Add return errors to protected cache ops for KVM
   - CM3: Ensure L1 & L2 cache ECC checking matches
   - CM3: Indicate inclusive caches
   - I6400: Treat dcache as physically indexed

  Memory management:
   - Ensure bootmem doesn't corrupt reserved memory
   - Export some TLB exception generation functions for KVM

  OF:
   - NULL check initial_boot_params before use in of_scan_flat_dt()
   - Fix unaligned access in of_alias_scan()

  SMP:
   - CPS: Don't BUG if a CPU fails to start

  Other fixes:
   - Fix longstanding 64-bit IP checksum carry bug
   - Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c
   - Update defconfigs for NF_CT_PROTO_DCCP, DPLITE,
     CPU_FREQ_STAT,SCSI_DH changes
   - Disable certain builtin compiler options, stack-check (whole
     kernel), asynchronous-unwind-tables (VDSO).
   - A bunch of build fixes from kernelci.org testing
   - Various other minor cleanups & corrections

  BMIPS:
   - Migrate interrupts during bmips_cpu_disable
   - BCM47xx: Add Luxul devices
   - BCM47xx: Fix Asus WL-500W button inversion
   - BCM7xxx: Add SPI device nodes

  Generic (multiplatform):
   - Add kexec DTB passing
   - Fix big endian
   - Add cpp_its_S in ksym_dep_filter to silence build warning

  IP22:
   - Reformat inline assembler code to modern standards
   - Fix binutils 2.25 build error

  IP27:
   - Fix duplicate CAC_BASE definition build error
   - Disable qlge driver to workaround broken compiler

  Lantiq:
   - Refresh defconfig and activate more drivers
   - Lock DMA register access
   - Fix cascading IRQ setup
   - Fix build of VPE loader
   - xway: Fix ethernet packet header corruption over reboot

  Loongson1
   - Add watchdog support
   - 1B: Reduce DEFAULT_MEMSIZE to 64MB
   - 1B: Change OSC clock name to match rest of kernel
   - 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB

  Octeon:
   - Add KASLR support
   - Support Octeon III USB controller
   - Fix large copy_from_user corner case
   - Enable devtmpfs in defconfig

  Netlogic:
   - Fix non-default XLR build error due to netlogic,xlp-pic code
   - Fix assembler warning from smpboot.S

  pic32mzda:
   - Fix linker error when early printk is disabled

  Pistachio:
   - Add base device tree
   - Add Ci40 "Marduk" device tree

  Ralink:
   - Support raw appended DTB
   - Add missing I2C & I2S clocks
   - Add missing pinmux and fix pinmux function name typo
   - Add missing clk_round_rate()
   - Clean up prom_init()
   - MT7621: Set SoC type
   - MT7621: Support highmem

  TXx9:
   - Modernize printing of kernel messages and resolve KERN_CONT fallout
   - 7segled: use permission-specific DEVICE_ATTR variants

  XilFPGA:
   - Add IRQ controller and UART IRQ
   - Add AXI I2C and emaclite to DT & defconfig"

* tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (148 commits)
  MIPS: VDSO: Explicitly use -fno-asynchronous-unwind-tables
  MIPS: BCM47XX: Fix button inversion for Asus WL-500W
  MIPS: DTS: Add img directory to Makefile
  MIPS: ip27: Disable qlge driver in defconfig
  MIPS: pic32mzda: Fix linker error for pic32_get_pbclk()
  MIPS: Lantiq: Keep ethernet enabled during boot
  MIPS: OCTEON: Fix copy_from_user fault handling for large buffers
  MIPS: Fix special case in 64 bit IP checksumming.
  MIPS: OCTEON: Enable DEVTMPFS
  MIPS: lantiq: Set physical_memsize
  MIPS: sysmips: Remove duplicated include from syscall.c
  Kbuild: Add cpp_its_S in ksym_dep_filter
  MIPS: Audit and remove any unnecessary uses of module.h
  MIPS: Unify perf counter register definitions
  MIPS: Disable stack checks on MIPS kernels
  MIPS: OCTEON: Platform support for OCTEON III USB controller
  MIPS: Lantiq: Fix cascaded IRQ setup
  MIPS: sync-r4k: Fix KERN_CONT fallout
  MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
  MIPS: Fix distclean with Makefile.postlink
  ...
2017-02-21 14:21:11 -08:00
Nicolai Hähnle
4694335dad drm/amdgpu: refuse to reserve io mem for split VRAM buffers
When the fast blit path fails while attempting to move a buffer from RAM
to VRAM, we fall back to a CPU-based memcpy that cannot handle split VRAM
buffers. Instead of crashing, simply fail the buffer move.

Ideally, we would teach TTM about split buffers so that the fallback still
works in this case, but that is quite involved. So for now, apply the
simplest possible fix.

Fixes: 40361bb1704b ("drm/amdgpu: add VRAM manager v2")
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-02-21 17:16:28 -05:00
Trond Myklebust
686a816ab6 NFSv4: Clean up owner/group attribute decode
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-02-21 16:56:16 -05:00
Trond Myklebust
5c741d4f22 SUNRPC: Add a helper function xdr_stream_decode_string_dup()
Create a helper function that decodes a xdr string object, allocates a memory
buffer and then store it as a NUL terminated string.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-02-21 16:56:16 -05:00
Trond Myklebust
1bbe60ff49 NFSv4: Remove bogus "struct nfs_client" argument from decode_ace()
We shouldn't need to force callers to carry an unused argument.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-02-21 16:56:16 -05:00
Trond Myklebust
5a1f6d9e9b NFSv4: Fix the underestimation of delegation XDR space reservation
Account for the "space_limit" field in struct open_write_delegation4.

Fixes: 2cebf82883 ("NFSv4: Fix the underestimate of NFSv4 open request size")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-02-21 16:56:16 -05:00
Trond Myklebust
c065eeea3b NFSv4: Replace callback string decode function with a generic
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-02-21 16:56:16 -05:00
Trond Myklebust
6da59ce2fd NFSv4: Replace the open coded decode_opaque_inline() with the new generic
Also ensure that we always check that the size of the decoded object
matches the expectation that it must be smaller than NFS4_OPAQUE_LIMIT.
This should be true for all the current users of decode_opaque_inline(),
including decode_ace(), decode_pathname(), decode_attr_fs_locations()
and decode_exchange_id().

Note that this allows us to get rid of a number of existing checks in
decode_exchange_id(),

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-02-21 16:56:16 -05:00
Trond Myklebust
ab6e9aaf16 NFSv4: Replace ad-hoc xdr encode/decode helpers with xdr_stream_* generics
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-02-21 16:56:16 -05:00
Trond Myklebust
0ae060ca2b SUNRPC: Add generic helpers for xdr_stream encode/decode
Add some generic helpers for encoding/decoding opaque structures and
basic u32/u64.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-02-21 16:56:16 -05:00
Linus Torvalds
252b95c0ed xen: features and fixes for 4.11-rc0
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJYrElpAAoJELDendYovxMvNFQH/RJU7lwDSf7rF7ZzFGvdcsfi
 T4DDuowkYoJm2+GypoRVzZZ0lxJlxr0mNKPvgGDvuTogMY7pvjAf6B7/xCvTFsNU
 UoO2I7ljgXxCXFRiXH50nAjS7PC2PFW3Qx+8XPIWeZmnUPeJi4Q43fiSloUt+a6l
 JgS/autOCflGasR5MihCZXkvdVF81K6GuEd3hCh9GKZ/8RiwNPaY50vHnMv/hfqq
 SJNRKOTSRXioYlTohLnjuPWHDMayRJEO48IXl3c7aNxDTkHjn78yaoPhJ7m+M0Bq
 s2GyaQA4tCwADhP+tilmI5H1vFpt6w9x7O0dgWiSm7TB91lwfZOen2WhTPPp6L8=
 =gktV
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.11-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:
 "Xen features and fixes:

   - a series from Boris Ostrovsky adding support for booting Linux as
     Xen PVH guest

   - a series from Juergen Gross streamlining the xenbus driver

   - a series from Paul Durrant adding support for the new device model
     hypercall

   - several small corrections"

* tag 'for-linus-4.11-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/privcmd: add IOCTL_PRIVCMD_RESTRICT
  xen/privcmd: Add IOCTL_PRIVCMD_DM_OP
  xen/privcmd: return -ENOTTY for unimplemented IOCTLs
  xen: optimize xenbus driver for multiple concurrent xenstore accesses
  xen: modify xenstore watch event interface
  xen: clean up xenbus internal headers
  xenbus: Neaten xenbus_va_dev_error
  xen/pvh: Use Xen's emergency_restart op for PVH guests
  xen/pvh: Enable CPU hotplug
  xen/pvh: PVH guests always have PV devices
  xen/pvh: Initialize grant table for PVH guests
  xen/pvh: Make sure we don't use ACPI_IRQ_MODEL_PIC for SCI
  xen/pvh: Bootstrap PVH guest
  xen/pvh: Import PVH-related Xen public interfaces
  xen/x86: Remove PVH support
  x86/boot/32: Convert the 32-bit pgtable setup code from assembly to C
  xen/manage: correct return value check on xenbus_scanf()
  x86/xen: Fix APIC id mismatch warning on Intel
  xen/netback: set default upper limit of tx/rx queues to 8
  xen/netfront: set default upper limit of tx/rx queues to 8
2017-02-21 13:53:41 -08:00
Nicolai Hähnle
3089c1df10 drm/ttm: fix use-after-free races in vm fault handling
The vm fault handler relies on the fact that the VMA owns a reference
to the BO. However, once mmap_sem is released, other tasks are free to
destroy the VMA, which can lead to the BO being freed. Fix two code
paths where that can happen, both related to vm fault retries.

Found via a lock debugging warning which flagged &bo->wu_mutex as
locked while being destroyed.

Fixes: cbe12e74ee ("drm/ttm: Allow vm fault retries")
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-02-21 16:48:45 -05:00
Linus Torvalds
b8989bccd6 Merge branch 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit
Pull audit updates from Paul Moore:
 "The audit changes for v4.11 are relatively small compared to what we
  did for v4.10, both in terms of size and impact.

   - two patches from Steve tweak the formatting for some of the audit
     records to make them more consistent with other audit records.

   - three patches from Richard record the name of a module on module
     load, fix the logging of sockaddr information when using
     socketcall() on 32-bit systems, and add the ability to reset
     audit's lost record counter.

   - my lone patch just fixes an annoying style nit that I was reminded
     about by one of Richard's patches.

  All these patches pass our test suite"

* 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit:
  audit: remove unnecessary curly braces from switch/case statements
  audit: log module name on init_module
  audit: log 32-bit socketcalls
  audit: add feature audit_lost reset
  audit: Make AUDIT_ANOM_ABEND event normalized
  audit: Make AUDIT_KERNEL event conform to the specification
2017-02-21 13:25:50 -08:00
Takashi Iwai
0b6b524f39 ALSA: x86: Don't enable runtime PM as default
Unlike HSW and newer, BYT/CHT devices have no fine control of audio
power domain in i915 side.  Since there is little gain by runtime PM
on BYT/CHT, so far, this commit removes the pm_runtime_enable() call
as default.

User who still wants the runtime PM may adjust the corresponding
sysfs files (power/control and power/autosuspend_delay_ms)
appropriately, of course.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-21 22:23:14 +01:00
Omar Sandoval
bd1599d931 scsi_transport_sas: fix BSG ioctl memory corruption
The end_device and sas_host devices support BSG ioctls, but the
request_queue allocated for them isn't set up to allocate the struct
scsi_request payload. This leads to memory corruption in the call to
scsi_req_init() in bsg_map_hdr(), since it will memset past the end of
the allocated request. Fix it by setting ->cmd_size on the allocated
request_queue.

Fixes: 82ed4db499 ("block: split scsi_request out of struct request")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-21 14:18:54 -07:00
Takashi Iwai
3002b9fb7c ALSA: x86: Use runtime PM autosuspend
This patch adds a few lines to the driver to use autosuspend for the
runtime PM.  It'll become useful with the combination of the keep-link
feature.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-21 22:17:45 +01:00
Bjorn Helgaas
c4d052ce97 Merge branch 'pci/virtualization' into next
* pci/virtualization:
  PCI: Add ACS quirk for Qualcomm QDF2400 and QDF2432
2017-02-21 15:16:28 -06:00
Bjorn Helgaas
42d87e3ffb Merge branch 'pci/msi' into next
* pci/msi:
  PCI/MSI: Fix msi_desc->affinity memory leak when freeing MSI IRQs
2017-02-21 15:16:22 -06:00
Bjorn Helgaas
2bdd584a75 Merge branch 'pci/enumeration' into next
* pci/enumeration:
  PCI: Sort the list of devices with D3 delay quirk by ID
2017-02-21 15:16:17 -06:00
Bjorn Helgaas
9e38637a08 Merge branch 'pci/host-xilinx' into next
* pci/host-xilinx:
  PCI: xilinx-nwl: Remove mask for messages not supported by AXI
  PCI: xilinx: Configure PCIe MPS settings
2017-02-21 15:16:12 -06:00
Bjorn Helgaas
9d534265bd Merge branch 'pci/host-xgene' into next
* pci/host-xgene:
  PCI: xgene: Configure PCIe MPS settings
  PCI: xgene: Fix double free on init error
2017-02-21 15:16:08 -06:00
Bjorn Helgaas
f08bf55e69 Merge branch 'pci/host-versatile' into next
* pci/host-versatile:
  PCI: versatile: Configure PCIe MPS settings
2017-02-21 15:15:54 -06:00
Bjorn Helgaas
b98a7f7509 Merge branch 'pci/host-thunder' into next
* pci/host-thunder:
  PCI: thunder-pem: Add support for cn81xx and cn83xx SoCs
2017-02-21 15:15:49 -06:00
Bjorn Helgaas
bcea623c65 Merge branch 'pci/host-rockchip' into next
* pci/host-rockchip:
  PCI: rockchip: Set vendor ID from local core config space
  PCI: rockchip: Fix rockchip_pcie_probe() error path to free resource list
  PCI: rockchip: Mark PM functions as __maybe_unused
  PCI: rockchip: Use readl_poll_timeout() instead of open-coding it
  PCI: rockchip: Disable RC's ASPM L0s based on DT "aspm-no-l0s"
  PCI: rockchip: Add system PM support
2017-02-21 15:15:44 -06:00
Bjorn Helgaas
56195e9d1d Merge branch 'pci/host-rcar' into next
* pci/host-rcar:
  PCI: rcar: Use of_device_get_match_data() to simplify probe
  PCI: rcar: Add compatible string for r8a7796
  PCI: rcar: Return -ENODEV from host bridge probe when no card present
2017-02-21 15:15:39 -06:00
Bjorn Helgaas
dda718926c Merge branch 'pci/host-mvebu' into next
* pci/host-mvebu:
  PCI: mvebu: Change delay after reset to the PCIe spec mandated 100ms
  PCI: mvebu: Handle changes to the bridge windows while enabled
2017-02-21 15:15:34 -06:00
Bjorn Helgaas
e2dc4f225b Merge branch 'pci/host-layerscape' into next
* pci/host-layerscape:
  PCI: layerscape: Use of_device_get_match_data() to simplify probe

Conflicts:
	drivers/pci/dwc/pci-layerscape.c
2017-02-21 15:15:21 -06:00
Bjorn Helgaas
68094b4b8d Merge branch 'pci/host-iproc' into next
* pci/host-iproc:
  PCI: Add Broadcom Northstar2 PAXC quirk for device class and MPSS
  PCI: iproc: Configure PCIe MPS settings
  PCI: iproc: Use of_device_get_match_data() to simplify probe
2017-02-21 15:15:05 -06:00
Bjorn Helgaas
e34e38bf89 Merge branch 'pci/host-imx6' into next
* pci/host-imx6:
  PCI: imx6: Fix a typo in error message
  PCI: imx6: Remove LTSSM disable workaround
  PCI: imx6: Remove redundant "Link never came up" message

Conflicts:
	drivers/pci/dwc/pci-imx6.c
2017-02-21 15:14:53 -06:00
Bjorn Helgaas
5dcda98a3b Merge branch 'pci/host-hv' into next
* pci/host-hv:
  PCI: hv: Use device serial number as PCI domain
  PCI: hv: Fix wslot_to_devfn() to fix warnings on device removal
2017-02-21 15:14:31 -06:00
Bjorn Helgaas
d952097158 Merge branch 'pci/host-hisi' into next
* pci/host-hisi:
  PCI: generic: Call pci_fixup_irqs() only on ARM
  PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports
  PCI: hisi: Rename config space accessors to remove "acpi"
  PCI: hisi: Add DT almost-ECAM support for Hip06/Hip07 host controllers
  PCI: hisi: Use of_device_get_match_data() to simplify probe

Conflicts:
	drivers/pci/dwc/pcie-hisi.c
2017-02-21 15:14:18 -06:00
Bjorn Helgaas
b2e6d3055d Merge branch 'pci/host-exynos' into next
* pci/host-exynos:
  PCI: exynos: Support the PHY generic framework
  Documentation: binding: Modify the exynos5440 PCIe binding
  phy: phy-exynos-pcie: Add support for Exynos PCIe PHY
  Documentation: samsung-phy: Add exynos-pcie-phy binding
  PCI: exynos: Refactor to make it easier to support other SoCs
  PCI: exynos: Remove duplicated code
  PCI: exynos: Use the bitops BIT() macro to build bitmasks
  PCI: exynos: Remove unnecessary local variables
  PCI: exynos: Replace the *_blk/*_phy/*_elb accessors
  PCI: exynos: Rename all pointer names from "exynos_pcie" to "ep"

Conflicts:
	drivers/pci/dwc/pci-exynos.c
2017-02-21 15:13:30 -06:00
Bjorn Helgaas
1a55761392 Merge branch 'pci/host-altera' into next
* pci/host-altera:
  PCI: altera: Extract TLP completion status correctly
2017-02-21 15:12:18 -06:00
Bjorn Helgaas
3bb0356bb1 Merge branch 'pci/host-designware' into next
* pci/host-designware:
  PCI: dwc: Remove dependency of designware on CONFIG_PCI
  PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host
  PCI: dwc: Split pcie-designware.c into host and core files
  PCI: dwc: designware: Fix style errors in pcie-designware.c
  PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc()
  PCI: dwc: all: Split struct pcie_port into host-only and core structures
  PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init()
  PCI: dwc: all: Rename cfg_read/cfg_write to read/write
  PCI: dwc: all: Use platform_set_drvdata() to save private data
  PCI: dwc: designware: Move register defines to designware header file
  PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code
  PCI: dra7xx: Group PHY API invocations
  PCI: dra7xx: Enable MSI and legacy interrupts simultaneously
  PCI: dra7xx: Add support to force RC to work in GEN1 mode
  PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional()
  PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory
  PCI: designware: Check for iATU unroll only on platforms that use ATU
2017-02-21 15:12:18 -06:00
Bhumika Goyal
04bab35044 ALSA: usb-audio: constify snd_kcontrol_new structures
Declare snd_kcontrol_new structures as const as they are only passed as
an argument to the function add_new_ctl. This agrument is of type const,
so snd_kcontrol_new structures having this property can be made const
too.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-21 22:02:03 +01:00
Bhumika Goyal
f3b827e0b1 ALSA: pci: constify snd_kcontrol_new structures
Declare snd_kcontrol_new structures as const as they are only passed as
an argument to the function snd_ctl_new1. This argument is of type
const, so snd_kcontrol_new structures having the same property can be
made const too.
Done using Coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct snd_kcontrol_new i@p = {...};

@ok1@
identifier r1.i;
position p;
expression e1;
@@
snd_ctl_new1(&i@p,e1)

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct snd_kcontrol_new i;

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-21 22:01:21 +01:00
Kishon Vijay Abraham I
7a2b3f024b PCI: dwc: Remove dependency of designware on CONFIG_PCI
CONFIG_PCI is used to enable host mode PCI. In preparation for adding
endpoint mode support to designware driver, remove the dependency of
designware on CONFIG_PCI and make only the host-specific part depend on
CONFIG_PCI.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-21 15:00:26 -06:00
Kishon Vijay Abraham I
a0560209f1 PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host
Now that PCI designware host has a separate file, add a new PCIE_DW_HOST
config symbol to select the host-only driver. This will enable to
independently select host support and endpoint support (when it's added).

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-21 15:00:26 -06:00