Add PRP specific function for handling duplicate
packets. This is needed because of potential
L2 802.1p prioritization done by network switches.
The L2 prioritization can re-order the PRP packets
from a node causing the existing implementation to
discard the frame(s) that have been received 'late'
because the sequence number is before the previous
received packet. This can happen if the node is
sending multiple frames back-to-back with different
priority.
Signed-off-by: Jaakko Karrenpalo <jkarrenpalo@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250307161700.1045-1-jkarrenpalo@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All drivers that use queue API are already converted to use
netdev instance lock. Move netdev instance lock management to
the netlink layer and drop rtnl_lock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry. <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As we move away from rtnl_lock for queue ops, introduce
per-netdev_nl_sock lock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No functional changes. Next patches will add more granular locking
to netdev_nl_sock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All (error) paths that call dev_close are already holding instance lock,
so switch to netif_close to avoid the deadlock.
v2:
- add missing EXPORT_MODULE for netif_close
Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a couple of places from which we can arrive to ndo_setup_tc
with TC_SETUP_BLOCK/TC_SETUP_FT:
- netlink
- netlink notifier
- netdev notifier
Locking netdev too deep in this call chain seems to be problematic
(especially assuming some/all of the call_netdevice_notifiers
NETDEV_UNREGISTER) might soon be running with the instance lock).
Revert to lockless ndo_setup_tc for TC_SETUP_BLOCK/TC_SETUP_FT. NFT
framework already takes care of most of the locking. Document
the assumptions.
ndo_setup_tc TC_SETUP_BLOCK
nft_block_offload_cmd
nft_chain_offload_cmd
nft_flow_block_chain
nft_flow_offload_chain
nft_flow_rule_offload_abort
nft_flow_rule_offload_commit
nft_flow_rule_offload_commit
nf_tables_commit
nfnetlink_rcv_batch
nfnetlink_rcv_skb_batch
nfnetlink_rcv
nft_offload_netdev_event
NETDEV_UNREGISTER notifier
ndo_setup_tc TC_SETUP_FT
nf_flow_table_offload_cmd
nf_flow_table_offload_setup
nft_unregister_flowtable_hook
nft_register_flowtable_net_hooks
nft_flowtable_update
nf_tables_newflowtable
nfnetlink_rcv_batch (.call NFNL_CB_BATCH)
nft_flowtable_update
nf_tables_newflowtable
nft_flowtable_event
nf_tables_flowtable_event
NETDEV_UNREGISTER notifier
__nft_unregister_flowtable_net_hooks
nft_unregister_flowtable_net_hooks
nf_tables_commit
nfnetlink_rcv_batch (.call NFNL_CB_BATCH)
__nf_tables_abort
nf_tables_abort
nfnetlink_rcv_batch
__nft_release_hook
__nft_release_hooks
nf_tables_pre_exit_net -> module unload
nft_rcv_nl_event
netlink_register_notifier (oh boy)
nft_register_flowtable_net_hooks
nft_flowtable_update
nf_tables_newflowtable
nf_tables_newflowtable
Fixes: c4f0f30b42 ("net: hold netdev instance lock during nft ndo_setup_tc")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reported-by: syzbot+0afb4bcf91e5a1afdcad@syzkaller.appspotmail.com
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250308044726.1193222-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, the PM code was dispersed in different places:
- pm.c had common code for all PMs, but also Netlink specific code that
will not be needed with the future BPF path-managers.
- pm_netlink.c had common Netlink code.
To clarify the code, a reorganisation is suggested here, only by moving
code around, and small helper renaming to avoid confusions:
- pm_netlink.c now only contains common PM Netlink code:
- PM events: this code was already there
- shared helpers around Netlink code that were already there as well
- shared Netlink commands code from pm.c
- pm.c now no longer contain Netlink specific code.
- protocol.h has been updated accordingly:
- mptcp_nl_fill_addr() no longer need to be exported.
The code around the PM is now less confusing, which should help for the
maintenance in the long term.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-15-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, the PM code was dispersed in different places:
- pm.c had common code for all PMs
- pm_netlink.c was supposed to be about the in-kernel PM, but also had
exported common Netlink helpers, NL events for PM userspace daemons,
etc. quite confusing.
To clarify the code, a reorganisation is suggested here, only by moving
code around to avoid confusions:
- pm_netlink.c now only contains common PM Netlink code:
- PM events: this code was already there
- shared helpers around Netlink code that were already there as well
- more shared Netlink commands code from pm.c will come after
- pm_kernel.c now contains only code that is specific to the in-kernel
PM. Now all functions are either called from:
- pm.c: events coming from the core, when this PM is being used
- pm_netlink.c: for shared Netlink commands
- mptcp_pm_gen.c: for Netlink commands specific to the in-kernel PM
- sockopt.c: for the exported counters per netns
- (while at it, a useless 'return;' spot by checkpatch at the end of
mptcp_pm_nl_set_flags_all, has been removed)
The code around the PM is now less confusing, which should help for the
maintenance in the long term.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-14-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, the PM code was dispersed in different places:
- pm.c had common code for all PMs
- pm_netlink.c was supposed to be about the in-kernel PM, but also had
exported common helpers, callbacks used by the different PMs, NL
events for PM userspace daemon, etc. quite confusing.
- pm_userspace.c had userspace PM only code, but using specific
in-kernel PM helpers
To clarify the code, a reorganisation is suggested here, only by moving
code around, and (un)exporting functions:
- helpers used from both PMs and not linked to Netlink
- callbacks used by different PMs, e.g. ADD_ADDR management
- some helpers have been marked as 'static'
- protocol.h has been updated accordingly
- (while at it, a needless if before a kfree(), spot by checkpatch in
mptcp_remove_anno_list_by_saddr(), has been removed)
The code around the PM is now less confusing, which should help for the
maintenance in the long term.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-13-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In prevision to another change importing all generic PM helpers from
pm_netlink.c to there.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-12-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a following commit, the 'remote_address' helper will need to be used
from different files.
It is then exported, and prefixed with 'mptcp_', similar to
'mptcp_local_address'.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-11-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make it clear what actions are in-kernel PM specific and which ones
are not and done for all PMs, e.g. sending ADD_ADDR and close associated
subflows when a RM_ADDR is received.
The behavioural is changed a bit: MPTCP_PM_ADD_ADDR_RECEIVED is now
treated after MPTCP_PM_ADD_ADDR_SEND_ACK and MPTCP_PM_RM_ADDR_RECEIVED,
but that should not change anything in practice.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-10-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When destroying an MPTCP socket, some userspace PM specific code was
called from mptcp_destroy_common() in protocol.c. That feels wrong, and
it is the only case.
Instead, the core now calls mptcp_pm_destroy() from pm.c which is now in
charge of cleaning the announced addresses list, and ask the different
PMs to do extra cleaning if needed, e.g. the userspace PM, if used, will
clean the local addresses list.
While at it, the userspace PM specific helper has been prefixed with
'mptcp_userspace_pm_' like the other ones.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-9-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. Here, '_pm' was missing from 'mptcp_nl_set_flags'.
Add '_pm' to be similar to others, and add '_all' to avoid confusions
witih the global 'mptcp_pm_nl_set_flags'.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-8-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_is_init_remote_addr' is not
specific to this PM: it is called from pm.c for both the in-kernel and
userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-7-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_subflow_chk_stale' is not specific
to this PM: it is called from pm.c for both the in-kernel and userspace
PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-6-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_rm_addr_received' is not specific
to this PM: it is called from the PM worker, and used by both the
in-kernel and userspace PMs. The helper has been renamed to
'mptcp_pm_rm_addr_recv' instead of '_received' to avoid confusions with
the one from pm.c.
mptcp_pm_nl_rm_addr_or_subflow', and 'mptcp_pm_nl_rm_subflow_received'
have been updated too for the same reason.
To avoid confusions, the '_nl' bit has been removed from the name.
While at it, the in-kernel PM specific code has been move from
mptcp_pm_rm_addr_or_subflow to a new dedicated helper, clearer.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-5-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_work' is not specific to this PM:
it is called from the core to call helpers, some of them needed by both
the in-kernel and userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
Also used 'worker' instead of 'work', similar to protocol.c's worker.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-4-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_mp_prio_send_ack()' is not
specific to this PM: it is used by both the in-kernel and userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-3-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_addr_send_ack()' is not specific
to this PM: it is used by both the in-kernel and userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-2-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following code in mptcp_userspace_pm_get_local_id() that assigns "skc"
to "new_entry" is not allowed in BPF if we use the same code to implement
the get_local_id() interface of a BFP path manager:
memset(&new_entry, 0, sizeof(struct mptcp_pm_addr_entry));
new_entry.addr = *skc;
new_entry.addr.id = 0;
new_entry.flags = MPTCP_PM_ADDR_FLAG_IMPLICIT;
To solve the issue, this patch moves this assignment to "new_entry" forward
to mptcp_pm_get_local_id(), and then passing "new_entry" as a parameter to
both mptcp_pm_nl_get_local_id() and mptcp_userspace_pm_get_local_id().
No behavioural changes intended.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-1-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When spanning datagram construction over multiple send calls using
MSG_MORE, per datagram settings are configured on the first send.
That is when ip(6)_setup_cork stores these settings for subsequent use
in __ip(6)_append_data and others.
The only flag that escaped this was dontfrag. As a result, a datagram
could be constructed with df=0 on the first sendmsg, but df=1 on a
next. Which is what cmsg_ip.sh does in an upcoming MSG_MORE test in
the "diff" scenario.
Changing datagram conditions in the middle of constructing an skb
makes this already complex code path even more convoluted. It is here
unintentional. Bring this flag in line with expected sockopt/cmsg
behavior.
And stop passing ipc6 to __ip6_append_data, to avoid such issues
in the future. This is already the case for __ip_append_data.
inet6_cork had a 6 byte hole, so the 1B flag has no impact.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250307033620.411611-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As of the blamed commit ipc6.dontfrag is always initialized at the
start of udpv6_sendmsg, by ipcm6_init_sk, to either 0 or 1.
Later checks against -1 are no longer needed and the branches are now
dead code.
The blamed commit had removed those branches. But I had overlooked
this one case.
UDP has both a lockless fast path and a slower path for corked
requests. This branch remained in the fast path.
Fixes: 096208592b ("ipv6: replace ipcm6_init calls with ipcm6_init_sk")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250307033620.411611-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the more esoteric helpers for netdev instance lock to
a dedicated header. This avoids growing netdevice.h to infinity
and makes rebuilding the kernel much faster (after touching
the header with the helpers).
The main netdev_lock() / netdev_unlock() functions are used
in static inlines in netdevice.h and will probably be used
most commonly, so keep them in netdevice.h.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SKB_DROP_REASON_UDP_CSUM can be used in four locations
when dropping a packet because of a wrong UDP checksum.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250307102002.2095238-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netpoll tries to refill the skb queue on every packet send, independently
if packets are being consumed from the pool or not. This was
particularly problematic while being called from printk(), where the
operation would be done while holding the console lock.
Introduce a more intelligent approach to skb queue management. Instead
of constantly attempting to refill the queue, the system now defers
refilling to a work queue and only triggers the workqueue when a buffer
is actually dequeued. This change significantly reduces operations with
the lock held.
Add a work_struct to the netpoll structure for asynchronous refilling,
updating find_skb() to schedule refill work only when necessary (skb is
dequeued).
These changes have demonstrated a 15% reduction in time spent during
netpoll_send_msg operations, especially when no SKBs are not consumed
from consumed from pool.
When SKBs are being dequeued, the improvement is even better, around
70%, mainly because refilling the SKB pool is now happening outside of
the critical patch (with console_owner lock held).
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250304-netpoll_refill_v2-v1-1-06e2916a4642@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When introduced in commit 61723b3932 ("tcp: ulp: add functions to dump
ulp-specific information"), the whole ULP diag info has been exported
only if the requester had CAP_NET_ADMIN.
It looks like not everything is sensitive, and some info can be exported
to all users in order to ease the debugging from the userspace side
without requiring additional capabilities. Each layer should then decide
what can be exposed to everybody. The 'net_admin' boolean is then passed
to the different layers.
On kTLS side, it looks like there is nothing sensitive there: version,
cipher type, tx/rx user config type, plus some flags. So, only some
metadata about the configuration, no cryptographic info like keys, etc.
Then, everything can be exported to all users.
On MPTCP side, that's different. The MPTCP-related sequence numbers per
subflow should certainly not be exposed to everybody. For example, the
DSS mapping and ssn_offset would give all users on the system access to
narrow ranges of values for the subflow TCP sequence numbers and
MPTCP-level DSNs, and then ease packet injection. The TCP diag interface
doesn't expose the TCP sequence numbers for TCP sockets, so best to do
the same here. The rest -- token, IDs, flags -- can be exported to
everybody.
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250306-net-next-tcp-ulp-diag-net-admin-v1-2-06afdd860fc9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since its introduction in commit 61723b3932 ("tcp: ulp: add functions
to dump ulp-specific information"), the ULP diag info have been exported
only if the requester had CAP_NET_ADMIN.
At least the ULP name can be exported without CAP_NET_ADMIN. This will
already help identifying which layer is being used, e.g. which TCP
connections are in fact MPTCP subflow.
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250306-net-next-tcp-ulp-diag-net-admin-v1-1-06afdd860fc9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent cleanup changed the behaviour of tcp_set_window_clamp(). This
looks unintentional, and affects MPTCP selftests, e.g. some tests
re-establishing a connection after a disconnect are now unstable.
Before the cleanup, this operation was done:
new_rcv_ssthresh = min(tp->rcv_wnd, new_window_clamp);
tp->rcv_ssthresh = max(new_rcv_ssthresh, tp->rcv_ssthresh);
The cleanup used the 'clamp' macro which takes 3 arguments -- value,
lowest, and highest -- and returns a value between the lowest and the
highest allowable values. This then assumes ...
lowest (rcv_ssthresh) <= highest (rcv_wnd)
... which doesn't seem to be always the case here according to the MPTCP
selftests, even when running them without MPTCP, but only TCP.
For example, when we have ...
rcv_wnd < rcv_ssthresh < new_rcv_ssthresh
... before the cleanup, the rcv_ssthresh was not changed, while after
the cleanup, it is lowered down to rcv_wnd (highest).
During a simple test with TCP, here are the values I observed:
new_window_clamp (val) rcv_ssthresh (lo) rcv_wnd (hi)
117760 (out) 65495 < 65536
128512 (out) 109595 > 80256 => lo > hi
1184975 (out) 328987 < 329088
113664 (out) 65483 < 65536
117760 (out) 110968 < 110976
129024 (out) 116527 > 109696 => lo > hi
Here, we can see that it is not that rare to have rcv_ssthresh (lo)
higher than rcv_wnd (hi), so having a different behaviour when the
clamp() macro is used, even without MPTCP.
Note: new_window_clamp is always out of range (rcv_ssthresh < rcv_wnd)
here, which seems to be generally the case in my tests with small
connections.
I then suggests reverting this part, not to change the behaviour.
Fixes: 863a952eb7 ("tcp: tcp_set_window_clamp() cleanup")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/551
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250305-net-next-fix-tcp-win-clamp-v1-1-12afb705d34e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to speedup __inet_hash_connect(), we want to ensure hash values
for <source address, port X, destination address, destination port>
are not randomly spread, but monotonically increasing.
Goal is to allow __inet_hash_connect() to derive the hash value
of a candidate 4-tuple with a single addition in the following
patch in the series.
Given :
hash_0 = inet_ehashfn(saddr, 0, daddr, dport)
hash_sport = inet_ehashfn(saddr, sport, daddr, dport)
Then (hash_sport == hash_0 + sport) for all sport values.
As far as I know, there is no security implication with this change.
After this patch, when __inet_hash_connect() has to try XXXX candidates,
the hash table buckets are contiguous and packed, allowing
a better use of cpu caches and hardware prefetchers.
Tested:
Server: ulimit -n 40000; neper/tcp_crr -T 200 -F 30000 -6 --nolog
Client: ulimit -n 40000; neper/tcp_crr -T 200 -F 30000 -6 --nolog -c -H server
Before this patch:
utime_start=0.271607
utime_end=3.847111
stime_start=18.407684
stime_end=1997.485557
num_transactions=1350742
latency_min=0.014131929
latency_max=17.895073144
latency_mean=0.505675853
latency_stddev=2.125164772
num_samples=307884
throughput=139866.80
perf top on client:
56.86% [kernel] [k] __inet6_check_established
17.96% [kernel] [k] __inet_hash_connect
13.88% [kernel] [k] inet6_ehashfn
2.52% [kernel] [k] rcu_all_qs
2.01% [kernel] [k] __cond_resched
0.41% [kernel] [k] _raw_spin_lock
After this patch:
utime_start=0.286131
utime_end=4.378886
stime_start=11.952556
stime_end=1991.655533
num_transactions=1446830
latency_min=0.001061085
latency_max=12.075275028
latency_mean=0.376375302
latency_stddev=1.361969596
num_samples=306383
throughput=151866.56
perf top:
50.01% [kernel] [k] __inet6_check_established
20.65% [kernel] [k] __inet_hash_connect
15.81% [kernel] [k] inet6_ehashfn
2.92% [kernel] [k] rcu_all_qs
2.34% [kernel] [k] __cond_resched
0.50% [kernel] [k] _raw_spin_lock
0.34% [kernel] [k] sched_balance_trigger
0.24% [kernel] [k] queued_spin_lock_slowpath
There is indeed an increase of throughput and reduction of latency.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250305034550.879255-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
net/ethtool/cabletest.c
2bcf4772e4 ("net: ethtool: try to protect all callback with netdev instance lock")
637399bf7e ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
No Adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Protect all ethtool callbacks and PHY related state with the netdev
instance lock, for drivers which want / need to have their ops
instance-locked. Basically take the lock everywhere we take rtnl_lock.
It was tempting to take the lock in ethnl_ops_begin(), but turns
out we actually nest those calls (when generating notifications).
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-11-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cover the paths that come via bpf system call and XSK bind.
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-10-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of them are already covered by the converted dev_xxx APIs.
Add the locking wrappers for the remaining ones.
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-9-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert all ndo_eth_ioctl invocations to dev_eth_ioctl which does the
locking. Reflow some of the dev_siocxxx to drop else clause.
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-8-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To preserve the atomicity, hold the lock while applying multiple
attributes. The major issue with a full conversion to the instance
lock are software nesting devices (bonding/team/vrf/etc). Those
devices call into the core stack for their lower (potentially
real hw) devices. To avoid explicitly wrapping all those places
into instance lock/unlock, introduce new API boundaries:
- (some) existing dev_xxx calls are now considered "external"
(to drivers) APIs and they transparently grab the instance
lock if needed (dev_api.c)
- new netif_xxx calls are internal core stack API (naming is
sketchy, I've tried netdev_xxx_locked per Jakub's suggestion,
but it feels a bit verbose; but happy to get back to this
naming scheme if this is the preference)
This avoids touching most of the existing ioctl/sysfs/drivers paths.
Note the special handling of ndo_xxx_slave operations: I exploit
the fact that none of the drivers that call these functions
need/use instance lock. At the same time, they use dev_xxx
APIs, so the lower device has to be unlocked.
Changes in unregister_netdevice_many_notify (to protect dev->state
with instance lock) trigger lockdep - the loop over close_list
(mostly from cleanup_net) introduces spurious ordering issues.
netdev_lock_cmp_fn has a justification on why it's ok to suppress
for now.
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-7-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the drivers that use queue management API, switch to the mode where
core stack holds the netdev instance lock. This affects the following
drivers:
- bnxt
- gve
- netdevsim
Originally I locked only start/stop, but switched to holding the
lock over all iterations to make them look atomic to the device
(feels like it should be easier to reason about).
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Qdisc operations that can lead to ndo_setup_tc might need
to have an instance lock. Add netdev_lock_ops/netdev_unlock_ops
invocations for all psched_rtnl_msg_handlers operations.
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Saeed Mahameed <saeed@kernel.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-5-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for grabbing netdev instance lock around qdisc
operations, introduce tc_xxx wrappers that lookup netdev
and call respective __tc_xxx helper to do the actual work.
No functional changes.
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Saeed Mahameed <saeed@kernel.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce new dev_setup_tc for nft ndo_setup_tc paths.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the drivers that use shaper API, switch to the mode where
core stack holds the netdev lock. This affects two drivers:
* iavf - already grabs netdev lock in ndo_open/ndo_stop, so mostly
remove these
* netdevsim - switch to _locked APIs to avoid deadlock
iavf_close diff is a bit confusing, the existing call looks like this:
iavf_close() {
netdev_lock()
..
netdev_unlock()
wait_event_timeout(down_waitqueue)
}
I change it to the following:
netdev_lock()
iavf_close() {
..
netdev_unlock()
wait_event_timeout(down_waitqueue)
netdev_lock() // reusing this lock call
}
netdev_unlock()
Since I'm reusing existing netdev_lock call, so it looks like I only
add netdev_unlock.
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing skb_dst_drop() to drop reference to the old dst before
adding the new dst to the skb.
Fixes: 79ff2fc31e ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250305081655.19032-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch follows commit 92191dd107 ("net: ipv6: fix dst ref loops in
rpl, seg6 and ioam6 lwtunnels") and, on a second thought, the same patch
is also needed for ila (even though the config that triggered the issue
was pathological, but still, we don't want that to happen).
Fixes: 79ff2fc31e ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250304181039.35951-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After blamed commit rtm_to_fib_config() now calls
lwtunnel_valid_encap_type{_attr}() without RTNL held,
triggering an unlock balance in __rtnl_unlock,
as reported by syzbot [1]
IPv6 and rtm_to_nh_config() are not yet converted.
Add a temporary @rtnl_is_held parameter to lwtunnel_valid_encap_type()
and lwtunnel_valid_encap_type_attr().
While we are at it replace the two rcu_dereference()
in lwtunnel_valid_encap_type() with more appropriate
rcu_access_pointer().
[1]
syz-executor245/5836 is trying to release lock (rtnl_mutex) at:
[<ffffffff89d0e38c>] __rtnl_unlock+0x6c/0xf0 net/core/rtnetlink.c:142
but there are no more locks to release!
other info that might help us debug this:
no locks held by syz-executor245/5836.
stack backtrace:
CPU: 0 UID: 0 PID: 5836 Comm: syz-executor245 Not tainted 6.14.0-rc4-syzkaller-00873-g3424291dd242 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_unlock_imbalance_bug+0x25b/0x2d0 kernel/locking/lockdep.c:5289
__lock_release kernel/locking/lockdep.c:5518 [inline]
lock_release+0x47e/0xa30 kernel/locking/lockdep.c:5872
__mutex_unlock_slowpath+0xec/0x800 kernel/locking/mutex.c:891
__rtnl_unlock+0x6c/0xf0 net/core/rtnetlink.c:142
lwtunnel_valid_encap_type+0x38a/0x5f0 net/core/lwtunnel.c:169
lwtunnel_valid_encap_type_attr+0x113/0x270 net/core/lwtunnel.c:209
rtm_to_fib_config+0x949/0x14e0 net/ipv4/fib_frontend.c:808
inet_rtm_newroute+0xf6/0x2a0 net/ipv4/fib_frontend.c:917
rtnetlink_rcv_msg+0x791/0xcf0 net/core/rtnetlink.c:6919
netlink_rcv_skb+0x206/0x480 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:709 [inline]
Fixes: 1dd2af7963 ("ipv4: fib: Convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL.")
Reported-by: syzbot+3f18ef0f7df107a3f6a0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67c6f87a.050a0220.38b91b.0147.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250304125918.2763514-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When I read through the TSO codes, I found out that we probably
miss initializing the tx_flags of last seg when TSO is turned
off, which means at the following points no more timestamp
(for this last one) will be generated. There are three flags
to be handled in this patch:
1. SKBTX_HW_TSTAMP
2. SKBTX_BPF
3. SKBTX_SCHED_TSTAMP
Note that SKBTX_BPF[1] was added in 6.14.0-rc2 by commit
6b98ec7e88 ("bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback")
and only belongs to net-next branch material for now. The common
issue of the above three flags can be fixed by this single patch.
This patch initializes the tx_flags to SKBTX_ANY_TSTAMP like what
the UDP GSO does to make the newly segmented last skb inherit the
tx_flags so that requested timestamp will be generated in each
certain layer, or else that last one has zero value of tx_flags
which leads to no timestamp at all.
Fixes: 4ed2d765df ("net-timestamp: TCP timestamping")
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>