Edward Cree says:
====================
fix use-after-free bugs in skb list processing
A couple of bugs in skb list handling were spotted by Dan Carpenter, with
the help of Smatch; following up on them I found a couple more similar
cases. This series fixes them by changing the relevant loops to use the
dequeue-enqueue model (rather than in-place list modification).
v3: fixed another similar bug in __netif_receive_skb_list_core().
v2: dropped patch #3 (new list.h helper), per DaveM's request.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
__netif_receive_skb_core can free the skb, so we have to use the dequeue-
enqueue model when calling it from __netif_receive_skb_list_core.
Fixes: 88eb1944e1 ("net: core: propagate SKB lists through packet_type lookup")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nf_hook() can free the skb, so we need to remove it from the list before
calling, and add passed skbs to a sublist afterwards.
Fixes: 17266ee939 ("net: ipv4: listified version of ip_rcv")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In netif_receive_skb_list_internal(), all of skb_defer_rx_timestamp(),
do_xdp_generic() and enqueue_to_backlog() can lead to kfree(skb). Thus,
we cannot wait until after they return to remove the skb from the list;
instead, we remove it first and, in the pass case, add it to a sublist
afterwards.
In the case of enqueue_to_backlog() we have already decided not to pass
when we call the function, so we do not need a sublist.
Fixes: 7da517a3bc ("net: core: Another step of skb receive list processing")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just like with PIPESTAT, the edge triggered IIR on i965/g4x
also causes problems for hotplug interrupts. To make sure
we don't get the IIR port interrupt bit stuck low with the
ISR bit high we must force an edge in ISR. Unfortunately
we can't borrow the PIPESTAT trick and toggle the enable
bits in PORT_HOTPLUG_EN as that act itself generates hotplug
interrupts. Instead we just have to loop until we've cleared
PORT_HOTPLUG_STAT, or we just give up and WARN.
v2: Don't frob with PORT_HOTPLUG_EN
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180614175625.1615-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 0ba7c51a6f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree:
1) Missing module autoloadfor icmp and icmpv6 x_tables matches,
from Florian Westphal.
2) Possible non-linear access to TCP header from tproxy, from
Mate Eckl.
3) Do not allow rbtree to be used for single elements, this patch
moves all set backend into one single module since such thing
can only happen if hashtable module is explicitly blacklisted,
which should not ever be done.
4) Reject error and standard targets from nft_compat for sanity
reasons, they are never used from there.
5) Don't crash on double hashsize module parameter, from Andrey
Ryabinin.
6) Drop dst on skb before placing it in the fragmentation
reassembly queue, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The proper return code is -EOPNOTSUPP and not -ENOSYS when the function
isn't supported, also make sure to return the right error code
from ipoib_transport_dev_init() when ipoib_cm_dev_init() is supported.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
roce_resolve_route_from_path() resolves the route based on the netdevice
of the GID attribute, therefore there is no point in checking again if
the route is resolved matches the same interface it arrived.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For most of these calls we can just pass NULL through to the fallback
function as the sb_dev. The only cases where we cannot are the cases where
we might be dealing with either an upper device or a driver that would
have configured things to support an sb_dev itself.
The only driver that has any significant change in this patch set should be
ixgbe as we can drop the redundant functionality that existed in both the
ndo_select_queue function and the fallback function that was passed through
to us.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch makes it so that instead of passing a void pointer as the
accel_priv we instead pass a net_device pointer as sb_dev. Making this
change allows us to pass the subordinate device through to the fallback
function eventually so that we can keep the actual code in the
ndo_select_queue call as focused on possible on the exception cases.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
commit ef1433f717 ("PCI: endpoint: Create configfs entry for each
pci_epf_device_id table entry") while adding configfs entry for each
pci_epf_device_id table entry introduced a NULL pointer dereference error
when CONFIG_PCI_ENDPOINT_CONFIGFS is not enabled.
Fix it here.
Fixes: ef1433f717 ("PCI: endpoint: Create configfs entry for each
pci_epf_device_id table entry")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[lorenzo.pieralisi: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This patch adds a generic version of the ndo_select_queue functions for
either returning 0 or selecting a queue based on the processor ID. This is
generally meant to just reduce the number of functions we have to change
in the future when we have to deal with ndo_select_queue changes.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This change makes it so that we can support the concept of subordinate
device traffic classes to the core networking code. In doing this we can
start pulling out the driver specific bits needed to support selecting a
queue based on an upper device.
The solution at is currently stands is only partially implemented. I have
the start of some XPS bits in here, but I would still need to allow for
configuration of the XPS maps on the queues reserved for the subordinate
devices. For now I am using the reference to the sb_dev XPS map as just a
way to skip the lookup of the lower device XPS map for now as that would
result in the wrong queue being picked.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
It is incorrect to depend on set_id value to know if counters were
allocated or not. set_id_valid field is set to true when counters
were allocated. Therefore, use set_id_valid while deciding to
free counters.
Cc: <stable@vger.kernel.org> # 4.15
Fixes: aac4492ef2 ("IB/mlx5: Update counter implementation for dual port RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch makes it so that we use the tc_to_txq mapping in the macvlan
device in order to select the Tx queue for outgoing packets.
The idea here is to try and move away from using ixgbe_select_queue and to
come up with a generic way to make this work for devices going forward. By
encoding this information in the netdev this can become something that can
be used generically as a solution for similar setups going forward.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Clean up a little bit code to drop unused port_num parameter.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead we are now checking the function pointers directly. Get rid of
both cases in ioctl and drop the nonsense idea that destroy can fail.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
In general, accessing userspace memory beyond the length of the supplied
buffer in VFS read/write handlers can lead to both kernel memory corruption
(via kernel_read()/kernel_write(), which can e.g. be triggered via
sys_splice()) and privilege escalation inside userspace.
In this case, the affected files are in debugfs (and should therefore only
be accessible to root), and the read handlers check that *pos is zero
(meaning that at least sys_splice() can't trigger kernel memory
corruption). Because of the root requirement, this is not a security fix,
but rather a cleanup.
For the read handlers, fix it by using simple_read_from_buffer() instead
of custom logic. Add min() calls to the write handlers.
Fixes: 4a2da0b8c0 ("IB/mlx5: Add debug control parameters for congestion control")
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch is meant to provide the basic tools needed to allow us to create
subordinate device traffic classes. The general idea here is to allow
subdividing the queues of a device into queue groups accessible through an
upper device such as a macvlan.
The idea here is to enforce the idea that an upper device has to be a
single queue device, ideally with IFF_NO_QUQUE set. With that being the
case we can pretty much guarantee that the tc_to_txq mappings and XPS maps
for the upper device are unused. As such we could reuse those in order to
support subdividing the lower device and distributing those queues between
the subordinate devices.
In order to distinguish between a regular set of traffic classes and if a
device is carrying subordinate traffic classes I changed num_tc from a u8
to a s16 value and use the negative values to represent the subordinate
pool values. So starting at -1 and running to -32768 we can encode those as
pool values, and the existing values of 0 to 15 can be maintained.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Fixes: 0e353e34e1 ("IB/core: add RW API support for signature MRs")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce the function __c4iw_poll_cq_one() such that c4iw_poll_cq_one()
becomes easier to analyze for static source code analyzers. This patch
avoids that sparse reports the following:
drivers/infiniband/hw/cxgb4/cq.c:401:36: warning: context imbalance in 'c4iw_flush_hw_cq' - unexpected unlock
drivers/infiniband/hw/cxgb4/cq.c:824:9: warning: context imbalance in 'c4iw_poll_cq_one' - different lock contexts for basic block
Compile-tested only.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Steve Wise <swise@chelsio.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce the function __iwch_poll_cq_one() to make iwch_poll_cq_one()
easier to analyze for static source code analyzers. This patch avoids
that sparse reports the following:
drivers/infiniband/hw/cxgb3/iwch_cq.c:187:9: warning: context imbalance in 'iwch_poll_cq_one' - different lock contexts for basic block
Compile-tested only.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Steve Wise <swise@chelsio.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch not only simplifies the error handling code in rxe_create_ah()
but also removes the dead code that was left behind by commit 47ec386662
("RDMA: Convert drivers to use sgid_attr instead of sgid_index").
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch makes it so that we do not report the traffic class or allow XPS
configuration on single queue devices. This is mostly to avoid unnecessary
complexity with changes I have planned that will allow us to reuse
the unused tc_to_txq and XPS configuration on a single queue device to
allow it to make use of a subset of queues on an underlying device.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
swap was broken on ARC due to silly copy-paste issue.
We encode offset from swapcache page in __swp_entry() as (off << 13) but
were not decoding back in __swp_offset() as (off >> 13) - it was still
(off << 13).
This finally fixes swap usage on ARC.
| # mkswap /dev/sda2
|
| # swapon -a -e /dev/sda2
| Adding 500728k swap on /dev/sda2. Priority:-2 extents:1 across:500728k
|
| # free
| total used free shared buffers cached
| Mem: 765104 13456 751648 4736 8 4736
| -/+ buffers/cache: 8712 756392
| Swap: 500728 0 500728
Cc: stable@vger.kernel.org
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The asm/module.h header file can not be included standalone, which
breaks the module signing code after a recent change:
In file included from kernel/module-internal.h:13,
from kernel/module_signing.c:17:
arch/arm/include/asm/module.h:37:27: error: 'struct module' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val);
This adds a forward declaration of struct module to make it all work.
Fixes: f314dfea16 ("modsign: log module name in the event of an error")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
We used to have pre-set CONFIG_INITRAMFS_SOURCE with local path
to intramfs in ARC defconfigs. This was quite convenient for
in-house development but not that convenient for newcomers
who obviusly don't have folders like "arc_initramfs" next to
the Linux source tree. Which leads to quite surprising failure
of defconfig building:
------------------------------->8-----------------------------
../scripts/gen_initramfs_list.sh: Cannot open '../../arc_initramfs_hs/'
../usr/Makefile:57: recipe for target 'usr/initramfs_data.cpio.gz' failed
make[2]: *** [usr/initramfs_data.cpio.gz] Error 1
------------------------------->8-----------------------------
So now when more and more people start to deal with our defconfigs
let's make their life easier with removal of CONFIG_INITRAMFS_SOURCE.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Since commit eedf265aa0 ("devpts: Make each mount of devpts an
independent filesystem.") CONFIG_DEVPTS_MULTIPLE_INSTANCES isn't needed
in the defconfig anymore.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This is used in configs lacking hardware atomics to emulate atomic r-m-w
for user space, implemented by disabling preemption in kernel.
However there are issues in current implementation:
1. Process not terminated if invalid user pointer passed:
i.e. __get_user() failed.
2. The reason for this patch was __put_user() failure not being handled
either, specifically for the COW break scenario.
The zero page is initially wired up and read from __get_user()
succeeds. A subsequent write by __put_user() induces a
Protection Violation, but COW can't finish as Linux page fault
handler is disabled due to preempt disable.
And what's worse is we silently return the stale value to user space.
Fix this specific case by re-enabling preemption and explicitly
fixing up the fault and retrying the whole sequence over.
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote the changelog]
In case of HSDK we have intermediate INTC in for of DW APB GPIO controller
which is used as a de-bounce logic for interrupt wires that come from
outside the board.
We cannot use existing "irq-dw-apb-ictl" driver here because all input
lines are routed to corresponding output lines but not muxed into one
line (this is configured in RTL and we cannot change this in software).
But even if we add such a feature to "irq-dw-apb-ictl" driver that won't
benefit us as higher-level INTC (in case of HSDK it is IDU) anyways has
per-input control so adding fully-controller intermediate INTC will only
bring some overhead on interrupt processing but no other benefits.
Thus we just do one-time configuration of DW APB GPIO controller and
forget about it.
Based on implementation available on arch/arc/plat-axs10x/axs10x.c file.
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Commit de0aa7b2f9 ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
uses local_bh_disable()/enable(), because hv_pci_onchannelcallback() can
also run in tasklet context as the channel event callback, so bottom halves
should be disabled to prevent a race condition.
With CONFIG_PROVE_LOCKING=y in the recent mainline, or old kernels that
don't have commit f71b74bca6 ("irq/softirqs: Use lockdep to assert IRQs
are disabled/enabled"), when the upper layer IRQ code calls
hv_compose_msi_msg() with local IRQs disabled, we'll see a warning at the
beginning of __local_bh_enable_ip():
IRQs not enabled as expected
WARNING: CPU: 0 PID: 408 at kernel/softirq.c:162 __local_bh_enable_ip
The warning exposes an issue in de0aa7b2f9: local_bh_enable() can
potentially call do_softirq(), which is not supposed to run when local IRQs
are disabled. Let's fix this by using local_irq_save()/restore() instead.
Note: hv_pci_onchannelcallback() is not a hot path because it's only called
when the PCI device is hot added and removed, which is infrequent.
Fixes: de0aa7b2f9 ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Avoid that the following compiler warning is reported when building with
W=1:
drivers/infiniband/hw/nes/nes_hw.c:646:51: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove these two functions since all their callers have been removed.
See also commit ea8c2d8f60 ("RDMA/core: Remove unused ib cache
functions").
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Make sure to use sizeof(...) instead of sizeof ... which is more
preferred.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This commit replaces all the unsigned definitions in favour of 'unsigned
int' which is preferred.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use min_t() macro to avoid the casting when using min() macro, also fix
the type of "length" and "wc->byte_len" to be "unsigned int" and
"u32" which is the right type for each one of them.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This pull request brings in the new HWMON driver for getting
under-voltage detection from the Raspberry Pi firmware, and a change
from Kees to remove another instance of VLA stack usage.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In the quest to remove all stack VLA usage from the kernel[1], this
removes the VLA in favor of a maximum size and adds a sanity check.
Existing callers of the firmware interface never need more than 24
bytes (struct gpio_set_config). This chooses 32 just to stay ahead
of future growth.
v2: Fix the length passed to rpi_firmware_property_list (by anholt,
acked by Kees).
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Since the raspberrypi-hwmon driver is tied to the VC4 firmware instead of
particular hardware its registration should be in the firmware driver.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Currently there is no easy way to detect undervoltage conditions on a
remote Raspberry Pi. This hwmon driver retrieves the state of the
undervoltage sensor via mailbox interface. The handling based on
Noralf's modifications to the downstream firmware driver. In case of
an undervoltage condition only an entry is written to the kernel log.
CC: "Noralf Trønnes" <noralf@tronnes.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Set initial Stingray watchdog timeout to 60 seconds
By the time when the userspace watchdog daemon is ready and taking control
over, the watchdog timeout will then be reset to what's configured in the
daemon.
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In cm_form_tid(), a two bit message sequence number is OR'ed into bit
31-30 of the lower TID value.
After commit f06d265375 ("IB/cm: Randomize starting comm ID"), the
local_id is XOR'ed with a 32-bit random value. Hence, bit 31-30 in the
lower TID now has an arbitrarily value and it makes no sense to OR in
the message sequence number.
Adding to that, the evolution in use of IDR routines in cm_alloc_id()
has always had the possibility of returning a value with bit 30 set.
In addition, said bits are never checked.
Hence, remove the encoding and the corresponding enum.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The format specifier "%p" can leak kernel addresses.
Use "%pK" instead.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
'cmd_pause' DMA channel capability means that respective DMA engine
supports both pausing and resuming given DMA channel. However, in some
cases it is important to know if DMA channel can be paused without the
need to resume it. This is a typical requirement for proper residue
reading on transfer timeout in UART drivers. There are also some DMA
engines with limited hardware, which doesn't really support resuming.
Reporting pause and resume capabilities separately allows UART drivers to
properly check for the really required capabilities and operate in DMA
mode also in systems with limited DMA hardware. On the other hand drivers,
which rely on full channel suspend/resume support, should now check for
both 'pause' and 'resume' features.
Existing clients of dma_get_slave_caps() have been checked and the only
driver which rely on proper channel resuming is soc-generic-dmaengine-pcm
driver, which has been updated to check the newly added capability.
Existing 'cmd_pause' now only indicates that DMA engine support pausing
given DMA channel.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
