Commit graph

783,042 commits

Author SHA1 Message Date
Lorenzo Bianconi
4a07ed51ca mt76x2: debugfs: add sw pulse statistics to dfs debugfs
Add sw pattern detector statistics to mt76x2 debugfs.
Moreover track down number of allocated sequence by the detector

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-04 18:16:01 +03:00
Lorenzo Bianconi
b7384e4e0d mt76x2: dfs: add sw pattern detector
Add sw DFS pattern detector support for mt76x2 based devices.
Dfs pattern supported:
- short pulse radar patterns
- staggered radar patterns

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-04 18:15:59 +03:00
Lorenzo Bianconi
1fc9bc9ab5 mt76x2: dfs: add sw event ring buffer
Introduce sw event ring buffer to queue DFS pulses loaded from the hw.
Radar pulses will be used in DFS sw detector

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-04 18:15:58 +03:00
Lorenzo Bianconi
ee8aa945e4 mt76: introduce mt76_{incr,decr} utility routines
Add mt76_{incr,decr} utility routines to increment/decrement a value
with wrap-around (they will be used by mt76x2 DFS sw detector)

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-04 18:15:57 +03:00
YueHaibing
f9cbaeb529 atmel: using strlcpy() to avoid possible buffer overflows
'firmware' is a module param which may been longer than firmware_id,
so using strlcpy() to guard against overflows. Also priv is allocated
with zeroed memory,no need to set firmware_id[0] to '\0'.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-04 18:15:06 +03:00
Gustavo A. R. Silva
04614fe46f wlcore: Fix memory leak in wlcore_cmd_wait_for_event_or_timeout
In case memory resources for *events_vector* were allocated, release
them before return.

Addresses-Coverity-ID: 1470194 ("Resource leak")
Fixes: 4ec7cece87 ("wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-04 18:14:09 +03:00
Daniel Mack
7444a80929 libertas: fix suspend and resume for SDIO connected cards
Prior to commit 573185cc7e ("mmc: core: Invoke sdio func driver's PM
callbacks from the sdio bus"), the MMC core used to call into the power
management functions of SDIO clients itself and removed the card if the
return code was non-zero. IOW, the mmc handled errors gracefully and didn't
upchain them to the pm core.

Since this change, the mmc core relies on generic power management
functions which treat all errors as a reason to cancel the suspend
immediately. This causes suspend attempts to fail when the libertas
driver is loaded.

To fix this, power down the card explicitly in if_sdio_suspend() when we
know we're about to lose power and return success. Also set a flag in these
cases, and power up the card again in if_sdio_resume().

Fixes: 573185cc7e ("mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus")
Cc: <stable@vger.kernel.org>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Chris Ball <chris@printf.net>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-04 18:12:46 +03:00
Rafał Miłecki
07b1ae4687 brcmfmac: update STA info struct to the v5
That struct is used when querying firmware for the STA. It seem is has
been changing during the time. Luckily its format seems to be backward
compatible starting with v2 (the only breakage was v1 -> v2).

The version that was supported by brcmfmac so far was v4. It was what
43602a1 and 4366b1 firmwares (7.35.177.56 and 10.10.69.3309 accordingly)
were using. It also seems to be used by early 4366c0 firmwares
(10.10.69.6908 and 10.10.69.69017).

The problem appears when switching to the 10.10.122.20 firmware. It uses
v5 and instead of falling back to v4 when submitted buffer isn't big
enough it fallbacks to the v3.

To receive all v4 specific info with the newest firmware we have to
submit a struct (buffer) that matches v5.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-04 18:08:06 +03:00
Rafał Miłecki
4b4a8d808c brcmfmac: define more bits for the flags of struct brcmf_sta_info_le
That struct is passed by a firmware when querying for STA info. Flags
are used to indicate what info could be obtained.

These new defines may allow passing more info to the cfg80211 in the
future. They had been obtained from Broadcom's SDK file wlioctl_defs.h
used by DD-WRT.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-04 18:07:25 +03:00
Rafał Miłecki
a8d7631858 brcmfmac: handle msgbuf packets marked with monitor mode flag
New Broadcom firmwares mark monitor mode packets using a newly defined
bit in the flags field. Use it to filter them out and pass to the
monitor interface. These defines were found in bcmmsgbuf.h from SDK.

As not every firmware generates radiotap header this commit introduces
BRCMF_FEAT_MONITOR_FMT_RADIOTAP flag. It has to be has based on firmware
capabilities. If not present brcmf_netif_mon_rx() will assume packet is
a raw 802.11 frame and will prepend it with an empty radiotap header.

This new code is limited to the msgbuf protocol at this point. Adding
support for SDIO/USB devices will require some extra work (possibly a
new firmware release).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-04 18:05:59 +03:00
Rafał Miłecki
e63410ac65 brcmfmac: detect firmware support for radiotap monitor frames
Depending on used build-time options some firmwares may already include
radiotap header in passed monitor frames. Add a new feature flag to
store info about it. It's needed for proper handling of received frames
before passing them up.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-04 18:05:57 +03:00
Rafał Miłecki
01f69dfafd brcmfmac: detect firmware support for monitor interface
Many/most of firmwares support creating monitor interface but only the
most recent ones explicitly /announce/ it using a "monitor" entry in the
list of capabilities.

Check for that entry and store internally info about monitor mode
support using a new feature flag. Once we sort out all details of
handling monitor interface it will be used when reporting available
interfaces to the cfg80211.

Later some fallback detecion method may be added for older firmwares.
For now just stick to the "monitor" capability which should be 100%
reliable.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-04 18:05:56 +03:00
Chris von Recklinghausen
b5cb15d937 usercopy: Allow boot cmdline disabling of hardening
Enabling HARDENED_USERCOPY may cause measurable regressions in networking
performance: up to 8% under UDP flood.

I ran a small packet UDP flood using pktgen vs. a host b2b connected. On
the receiver side the UDP packets are processed by a simple user space
process that just reads and drops them:

https://github.com/netoptimizer/network-testing/blob/master/src/udp_sink.c

Not very useful from a functional PoV, but it helps to pin-point
bottlenecks in the networking stack.

When running a kernel with CONFIG_HARDENED_USERCOPY=y, I see a 5-8%
regression in the receive tput, compared to the same kernel without this
option enabled.

With CONFIG_HARDENED_USERCOPY=y, perf shows ~6% of CPU time spent
cumulatively in __check_object_size (~4%) and __virt_addr_valid (~2%).

The call-chain is:

__GI___libc_recvfrom
entry_SYSCALL_64_after_hwframe
do_syscall_64
__x64_sys_recvfrom
__sys_recvfrom
inet_recvmsg
udp_recvmsg
__check_object_size

udp_recvmsg() actually calls copy_to_iter() (inlined) and the latters
calls check_copy_size() (again, inlined).

A generic distro may want to enable HARDENED_USERCOPY in their default
kernel config, but at the same time, such distro may want to be able to
avoid the performance penalties in with the default configuration and
disable the stricter check on a per-boot basis.

This change adds a boot parameter that conditionally disables
HARDENED_USERCOPY via "hardened_usercopy=off".

Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-07-04 08:04:52 -07:00
Srinivas Kandagatla
f1478a1476
ASoC: qdsp6: q6afe-dai: Do not overwrite slim dai num_channels
num_channels for slim dais are aready set int set_channel_map,
do not overwrite them in hw_params.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-04 15:41:40 +01:00
Srinivas Kandagatla
9191ffe2d2
ASoC: qdsp6: q6routing: add slim rx routings
This patch add routings mixer controls for slim rx ports.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-04 15:41:39 +01:00
Srinivas Kandagatla
f03d6b1b4d
ASoC: qdsp6: q6afe-dai: add support to slim tx dais
This patch adds support to SLIMbus TX dais in AFE module.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-04 15:41:38 +01:00
Srinivas Kandagatla
25090bc3f3
ASoC: qdsp6: q6afe: Add missing slimbus capture ports
Existing code already has support for SLIMbus TX and RX, only thing
that was missing from TX side was mapping between virtual to actual
DSP port ids.

This patch adds those mappings.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-04 15:41:37 +01:00
Takashi Iwai
b1625fbb3b
ASoC: stm32: Use snd_pcm_stop_xrun() helper
The XRUN trigger from the driver should be done via
snd_pcm_stop_xrun().  It simplifies the locking as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-04 15:41:36 +01:00
Takashi Iwai
dc865fb9e7
ASoC: sti: Use snd_pcm_stop_xrun() helper
The XRUN trigger from the driver should be done via
snd_pcm_stop_xrun().  It fixes the missing stream locking as a gratis,
too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-04 15:41:35 +01:00
Takashi Iwai
1a42e7e3af
ASoC: qcom: Use snd_pcm_stop_xrun() helper
The XRUN trigger from the driver should be done via
snd_pcm_stop_xrun().  It fixes the missing stream locking as a gratis,
too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-04 15:41:34 +01:00
Takashi Iwai
dae35d1f4f
ASoC: davinci: Use snd_pcm_stop_xrun() helper
Replace open-codes with the standard snd_pcm_stop_xrun() helper.
It simplifies codes a lot.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-04 15:41:33 +01:00
Gustavo A. R. Silva
da13ed1d80
ASoC: nau8825: use 64-bit arithmetic instead of 32-bit
Add suffix ULL to constant 256 in order to give the compiler complete
information about the proper arithmetic to use.

Notice that such constant is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:

256 * fs * 2 * mclk_src_scaling[i].param

Addresses-Coverity-ID: 1339616 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-04 15:41:32 +01:00
Srinivas Kandagatla
5dffc1752c
ASoC: qdsp6: q6asm-dai: do not close port if its not opened
asm ports are open as part of prepare, so for use cases like
"aplay sample.wav" were sample.wav is not present. This would
call port close eventhough port was never opened. DSP would
return errors for such use cases.

Avoid doing this by checking the port state.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-04 15:34:48 +01:00
Srinivas Kandagatla
110743189c
ASoC: qdsp6: q6afe-dai: do not close port if its not opened
afe ports are open as part of prepare, so for use cases like
"aplay sample.wav" were sample.wav is not present. This would
call port close eventhough port was never opened. DSP would
return errors for such use cases.

Avoid doing this by checking the port state.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-04 15:34:48 +01:00
Maciej Purski
44f9a4b0dc drm/bridge/sii8620: Fix link mode selection
Current link mode values do not allow to enable packed pixel modes.

Select packed pixel clock mode, if needed, every time the link mode
register gets updated.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-4-git-send-email-m.purski@samsung.com
2018-07-04 16:27:51 +02:00
Maciej Purski
fdddc65ab3 drm/bridge/sii8620: Fix display of packed pixel modes
Current implementation does not guarantee packed pixel modes working
with every dongle. There are some dongles, which require selecting
the output mode explicitly.

Write proper values to registers in packed_pixel mode, based on how it
is done in vendor's code. Select output color space: RGB
(no packed pixel) or YCBCR422 (packed pixel).

This reverts commit e8b92efa62
("drm/bridge/sii8620: fix display of packed pixel modes in MHL2").

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-3-git-send-email-m.purski@samsung.com
2018-07-04 16:27:50 +02:00
Maciej Purski
f0139752f7 drm/bridge/sii8620: Send AVI infoframe in all MHL versions
Currently AVI infoframe is sent only in MHL3. However, some MHL2 dongles
need AVI infoframe to work correctly in either packed pixel mode or
non-packed pixel mode.

Send AVI infoframe in set_infoframes() in every case. Create an
infoframe using drm_hdmi_infoframe_from_display_mode() instead of
manually filling each infoframe structure's field.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-2-git-send-email-m.purski@samsung.com
2018-07-04 16:27:49 +02:00
Maciej S. Szmigiero
010b876ae9 media: tuner-simple: allow setting mono radio mode
For some types of tuners (Philips FMD1216ME(X) MK3 currently) we know that
letting TDA9887 output port 1 remain high (inactive) will switch FM radio
to mono mode.
Let's make use of this functionality - nothing changes for the default
stereo radio mode.

Tested on a Medion 95700 board which has a FMD1216ME tuner.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04 09:49:27 -04:00
Olli Salonen
367b160fe4 USB: serial: cp210x: add another USB ID for Qivicon ZigBee stick
There are two versions of the Qivicon Zigbee stick in circulation. This
adds the second USB ID to the cp210x driver.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2018-07-04 15:44:07 +02:00
Dan Carpenter
e33eab9ded USB: serial: ch341: fix type promotion bug in ch341_control_in()
The "r" variable is an int and "bufsize" is an unsigned int so the
comparison is type promoted to unsigned.  If usb_control_msg() returns a
negative that is treated as a high positive value and the error handling
doesn't work.

Fixes: 2d5a9c72d0 ("USB: serial: ch341: fix control-message error handling")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2018-07-04 15:40:54 +02:00
Colin Ian King
211c41c8c4 epic100: remove redundant variable 'irq'
Variable 'irq' is being assigned but is never used hence it is
and can be removed.

Cleans up clang warning:
warning: variable 'irq' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:39:11 +09:00
Colin Ian King
2e6dde5c61 sfc: remove redundant variable old_vlan
Variable old_vlan is being assigned but is never used hence it is
and can be removed.

Cleans up clang warning:
warning: variable 'old_vlan' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:39:11 +09:00
Colin Ian King
9b0bb10a84 qed: remove redundant pointer 'name'
Pointer 'name' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'name' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:39:11 +09:00
Colin Ian King
5074298ab0 ethernet: micrel: remove redundant pointer 'info'
Pointer 'info' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'info' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:39:11 +09:00
Colin Ian King
541a1fecff net: hinic: remove redundant pointer pfhwdev
Pointer pfhwdev is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'pfhwdev' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:39:11 +09:00
Colin Ian King
8c3689fcc5 net: hns3: remove redundant variable 'protocol'
Variable 'protocol' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'protocol' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:39:11 +09:00
Colin Ian King
1d981f1dbe net: ethernet: gianfar_ethtool: remove redundant variable last_rule_idx
Variable last_rule_idx is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'last_rule_idx' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:39:11 +09:00
Colin Ian King
f06bd2ed74 net: fec: remove redundant variable 'inc'
Variable 'inc' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'inc' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:39:11 +09:00
Colin Ian King
b68431ace4 cnic: remove redundant pointer req and variable func
Pointer req and variable func are being assigned but are never used
hence they are redundant and can be removed.

Cleans up clang warnings:
warning: variable 'req' set but not used [-Wunused-but-set-variable]
warning: variable 'func' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:39:11 +09:00
Colin Ian King
15cdd5764a net: bgmac: remove redundant variable 'freed'
Variable 'freed' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'freed' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:39:11 +09:00
Colin Ian King
5b9f78ecdf net: ethernet: nb8800: remove redundant pointer rxd
Pointer rxd is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'rxb' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:39:10 +09:00
Colin Ian King
371b4fc33b net: alx: remove redundant variable old_duplex
Variable old_duplex is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'old_duplex' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:39:10 +09:00
Colin Ian King
3ff39a2164 net: alteon: acenic: remove redundant pointer rxdesc
Pointer rxdesc is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'rxdesc' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:39:10 +09:00
Colin Ian King
5c17a07cff net: dsa: bcm_sf2: remove redundant variable off
Variable 'off' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'off' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:39:10 +09:00
Maciej S. Szmigiero
af16d0a132 media: cx25840: add kernel-doc description of struct cx25840_state
This commit describes a device instance private data of the driver
(struct cx25840_state) in a kernel-doc style comment.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04 09:38:49 -04:00
Takashi Iwai
e647f5a5c5 ALSA: pcm: Use snd_pcm_stop_xrun() for xrun injection
Basically the xrun injection routine can simply call the standard
helper snd_pcm_stop_xrun(), but with one exception: it may be called
even when the stream is closed.

Make snd_pcm_stop_xrun() more robust and check the NULL runtime state,
and simplify xrun injection code by calling it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-04 15:34:59 +02:00
Takashi Iwai
9cd641ed31 ALSA: pcm: trace XRUN event at injection, too
The PCM xrun injection triggers directly snd_pcm_stop() without the
standard xrun handler, hence it's not recorded on the event buffer.
Ditto for snd_pcm_stop_xrun() call and SNDRV_PCM_IOCTL_XRUN ioctl.
They are inconvenient from the debugging POV.

Let's make them to trigger XRUN via the standard helper more
consistently.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-04 15:34:57 +02:00
Maciej S. Szmigiero
c928d45475 media: ivtv: zero-initialize cx25840 platform data
We need to zero-initialize cx25840 platform data structure to make sure
that its future members do not contain random stack garbage.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04 09:33:54 -04:00
Keiichi Watanabe
d45c9dc0b8 media: mtk-vcodec: Support VP9 profile in decoder
Add V4L2_CID_MPEG_VIDEO_VP9_PROFILE control in MediaTek decoder's
driver. MediaTek decoder only supports profile 0 for now.

Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04 09:33:17 -04:00
Keiichi Watanabe
2a75364d09 media: v4l2-ctrl: Add control for VP9 profile
Add a new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE for VP9 profiles. This control
allows selecting the desired profile for VP9 encoder and querying for supported
profiles by VP9 encoder/decoder.

Though this control is similar to V4L2_CID_MPEG_VIDEO_VP8_PROFILE, we need to
separate this control from it because supported profiles usually differ between
VP8 and VP9.

Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04 09:32:22 -04:00