Commit graph

783,042 commits

Author SHA1 Message Date
Petr Machata
a483373ead net: ip6_gre: Split up ip6gre_tnl_link_config()
The function ip6gre_tnl_link_config() is used for setting up
configuration of both ip6gretap and ip6erspan tunnels. Split the
function into the common part and the route-lookup part. The latter then
takes the calculated header length as an argument. This split will allow
the patches down the line to sneak in a custom header length computation
for the ERSPAN tunnel.

Fixes: 5a963eb61b ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:50:06 -04:00
Petr Machata
5691484df9 net: ip6_gre: Fix headroom request in ip6erspan_tunnel_xmit()
dev->needed_headroom is not primed until ip6_tnl_xmit(), so it starts
out zero. Thus the call to skb_cow_head() fails to actually make sure
there's enough headroom to push the ERSPAN headers to. That can lead to
the panic cited below. (Reproducer below that).

Fix by requesting either needed_headroom if already primed, or just the
bare minimum needed for the header otherwise.

[  190.703567] kernel BUG at net/core/skbuff.c:104!
[  190.708384] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[  190.714007] Modules linked in: act_mirred cls_matchall ip6_gre ip6_tunnel tunnel6 gre sch_ingress vrf veth x86_pkg_temp_thermal mlx_platform nfsd e1000e leds_mlxcpld
[  190.728975] CPU: 1 PID: 959 Comm: kworker/1:2 Not tainted 4.17.0-rc4-net_master-custom-139 #10
[  190.737647] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016
[  190.747006] Workqueue: ipv6_addrconf addrconf_dad_work
[  190.752222] RIP: 0010:skb_panic+0xc3/0x100
[  190.756358] RSP: 0018:ffff8801d54072f0 EFLAGS: 00010282
[  190.761629] RAX: 0000000000000085 RBX: ffff8801c1a8ecc0 RCX: 0000000000000000
[  190.768830] RDX: 0000000000000085 RSI: dffffc0000000000 RDI: ffffed003aa80e54
[  190.776025] RBP: ffff8801bd1ec5a0 R08: ffffed003aabce19 R09: ffffed003aabce19
[  190.783226] R10: 0000000000000001 R11: ffffed003aabce18 R12: ffff8801bf695dbe
[  190.790418] R13: 0000000000000084 R14: 00000000000006c0 R15: ffff8801bf695dc8
[  190.797621] FS:  0000000000000000(0000) GS:ffff8801d5400000(0000) knlGS:0000000000000000
[  190.805786] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  190.811582] CR2: 000055fa929aced0 CR3: 0000000003228004 CR4: 00000000001606e0
[  190.818790] Call Trace:
[  190.821264]  <IRQ>
[  190.823314]  ? ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre]
[  190.828940]  ? ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre]
[  190.834562]  skb_push+0x78/0x90
[  190.837749]  ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre]
[  190.843219]  ? ip6gre_tunnel_ioctl+0xd90/0xd90 [ip6_gre]
[  190.848577]  ? debug_check_no_locks_freed+0x210/0x210
[  190.853679]  ? debug_check_no_locks_freed+0x210/0x210
[  190.858783]  ? print_irqtrace_events+0x120/0x120
[  190.863451]  ? sched_clock_cpu+0x18/0x210
[  190.867496]  ? cyc2ns_read_end+0x10/0x10
[  190.871474]  ? skb_network_protocol+0x76/0x200
[  190.875977]  dev_hard_start_xmit+0x137/0x770
[  190.880317]  ? do_raw_spin_trylock+0x6d/0xa0
[  190.884624]  sch_direct_xmit+0x2ef/0x5d0
[  190.888589]  ? pfifo_fast_dequeue+0x3fa/0x670
[  190.892994]  ? pfifo_fast_change_tx_queue_len+0x810/0x810
[  190.898455]  ? __lock_is_held+0xa0/0x160
[  190.902422]  __qdisc_run+0x39e/0xfc0
[  190.906041]  ? _raw_spin_unlock+0x29/0x40
[  190.910090]  ? pfifo_fast_enqueue+0x24b/0x3e0
[  190.914501]  ? sch_direct_xmit+0x5d0/0x5d0
[  190.918658]  ? pfifo_fast_dequeue+0x670/0x670
[  190.923047]  ? __dev_queue_xmit+0x172/0x1770
[  190.927365]  ? preempt_count_sub+0xf/0xd0
[  190.931421]  __dev_queue_xmit+0x410/0x1770
[  190.935553]  ? ___slab_alloc+0x605/0x930
[  190.939524]  ? print_irqtrace_events+0x120/0x120
[  190.944186]  ? memcpy+0x34/0x50
[  190.947364]  ? netdev_pick_tx+0x1c0/0x1c0
[  190.951428]  ? __skb_clone+0x2fd/0x3d0
[  190.955218]  ? __copy_skb_header+0x270/0x270
[  190.959537]  ? rcu_read_lock_sched_held+0x93/0xa0
[  190.964282]  ? kmem_cache_alloc+0x344/0x4d0
[  190.968520]  ? cyc2ns_read_end+0x10/0x10
[  190.972495]  ? skb_clone+0x123/0x230
[  190.976112]  ? skb_split+0x820/0x820
[  190.979747]  ? tcf_mirred+0x554/0x930 [act_mirred]
[  190.984582]  tcf_mirred+0x554/0x930 [act_mirred]
[  190.989252]  ? tcf_mirred_act_wants_ingress.part.2+0x10/0x10 [act_mirred]
[  190.996109]  ? __lock_acquire+0x706/0x26e0
[  191.000239]  ? sched_clock_cpu+0x18/0x210
[  191.004294]  tcf_action_exec+0xcf/0x2a0
[  191.008179]  tcf_classify+0xfa/0x340
[  191.011794]  __netif_receive_skb_core+0x8e1/0x1c60
[  191.016630]  ? debug_check_no_locks_freed+0x210/0x210
[  191.021732]  ? nf_ingress+0x500/0x500
[  191.025458]  ? process_backlog+0x347/0x4b0
[  191.029619]  ? print_irqtrace_events+0x120/0x120
[  191.034302]  ? lock_acquire+0xd8/0x320
[  191.038089]  ? process_backlog+0x1b6/0x4b0
[  191.042246]  ? process_backlog+0xc2/0x4b0
[  191.046303]  process_backlog+0xc2/0x4b0
[  191.050189]  net_rx_action+0x5cc/0x980
[  191.053991]  ? napi_complete_done+0x2c0/0x2c0
[  191.058386]  ? mark_lock+0x13d/0xb40
[  191.062001]  ? clockevents_program_event+0x6b/0x1d0
[  191.066922]  ? print_irqtrace_events+0x120/0x120
[  191.071593]  ? __lock_is_held+0xa0/0x160
[  191.075566]  __do_softirq+0x1d4/0x9d2
[  191.079282]  ? ip6_finish_output2+0x524/0x1460
[  191.083771]  do_softirq_own_stack+0x2a/0x40
[  191.087994]  </IRQ>
[  191.090130]  do_softirq.part.13+0x38/0x40
[  191.094178]  __local_bh_enable_ip+0x135/0x190
[  191.098591]  ip6_finish_output2+0x54d/0x1460
[  191.102916]  ? ip6_forward_finish+0x2f0/0x2f0
[  191.107314]  ? ip6_mtu+0x3c/0x2c0
[  191.110674]  ? ip6_finish_output+0x2f8/0x650
[  191.114992]  ? ip6_output+0x12a/0x500
[  191.118696]  ip6_output+0x12a/0x500
[  191.122223]  ? ip6_route_dev_notify+0x5b0/0x5b0
[  191.126807]  ? ip6_finish_output+0x650/0x650
[  191.131120]  ? ip6_fragment+0x1a60/0x1a60
[  191.135182]  ? icmp6_dst_alloc+0x26e/0x470
[  191.139317]  mld_sendpack+0x672/0x830
[  191.143021]  ? igmp6_mcf_seq_next+0x2f0/0x2f0
[  191.147429]  ? __local_bh_enable_ip+0x77/0x190
[  191.151913]  ipv6_mc_dad_complete+0x47/0x90
[  191.156144]  addrconf_dad_completed+0x561/0x720
[  191.160731]  ? addrconf_rs_timer+0x3a0/0x3a0
[  191.165036]  ? mark_held_locks+0xc9/0x140
[  191.169095]  ? __local_bh_enable_ip+0x77/0x190
[  191.173570]  ? addrconf_dad_work+0x50d/0xa20
[  191.177886]  ? addrconf_dad_work+0x529/0xa20
[  191.182194]  addrconf_dad_work+0x529/0xa20
[  191.186342]  ? addrconf_dad_completed+0x720/0x720
[  191.191088]  ? __lock_is_held+0xa0/0x160
[  191.195059]  ? process_one_work+0x45d/0xe20
[  191.199302]  ? process_one_work+0x51e/0xe20
[  191.203531]  ? rcu_read_lock_sched_held+0x93/0xa0
[  191.208279]  process_one_work+0x51e/0xe20
[  191.212340]  ? pwq_dec_nr_in_flight+0x200/0x200
[  191.216912]  ? get_lock_stats+0x4b/0xf0
[  191.220788]  ? preempt_count_sub+0xf/0xd0
[  191.224844]  ? worker_thread+0x219/0x860
[  191.228823]  ? do_raw_spin_trylock+0x6d/0xa0
[  191.233142]  worker_thread+0xeb/0x860
[  191.236848]  ? process_one_work+0xe20/0xe20
[  191.241095]  kthread+0x206/0x300
[  191.244352]  ? process_one_work+0xe20/0xe20
[  191.248587]  ? kthread_stop+0x570/0x570
[  191.252459]  ret_from_fork+0x3a/0x50
[  191.256082] Code: 14 3e ff 8b 4b 78 55 4d 89 f9 41 56 41 55 48 c7 c7 a0 cf db 82 41 54 44 8b 44 24 2c 48 8b 54 24 30 48 8b 74 24 20 e8 16 94 13 ff <0f> 0b 48 c7 c7 60 8e 1f 85 48 83 c4 20 e8 55 ef a6 ff 89 74 24
[  191.275327] RIP: skb_panic+0xc3/0x100 RSP: ffff8801d54072f0
[  191.281024] ---[ end trace 7ea51094e099e006 ]---
[  191.285724] Kernel panic - not syncing: Fatal exception in interrupt
[  191.292168] Kernel Offset: disabled
[  191.295697] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Reproducer:

	ip link add h1 type veth peer name swp1
	ip link add h3 type veth peer name swp3

	ip link set dev h1 up
	ip address add 192.0.2.1/28 dev h1

	ip link add dev vh3 type vrf table 20
	ip link set dev h3 master vh3
	ip link set dev vh3 up
	ip link set dev h3 up

	ip link set dev swp3 up
	ip address add dev swp3 2001:db8:2::1/64

	ip link set dev swp1 up
	tc qdisc add dev swp1 clsact

	ip link add name gt6 type ip6erspan \
		local 2001:db8:2::1 remote 2001:db8:2::2 oseq okey 123
	ip link set dev gt6 up

	sleep 1

	tc filter add dev swp1 ingress pref 1000 matchall skip_hw \
		action mirred egress mirror dev gt6
	ping -I h1 192.0.2.2

Fixes: e41c7c68ea ("ip6erspan: make sure enough headroom at xmit.")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:50:06 -04:00
Petr Machata
01b8d064d5 net: ip6_gre: Request headroom in __gre6_xmit()
__gre6_xmit() pushes GRE headers before handing over to ip6_tnl_xmit()
for generic IP-in-IP processing. However it doesn't make sure that there
is enough headroom to push the header to. That can lead to the panic
cited below. (Reproducer below that).

Fix by requesting either needed_headroom if already primed, or just the
bare minimum needed for the header otherwise.

[  158.576725] kernel BUG at net/core/skbuff.c:104!
[  158.581510] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[  158.587174] Modules linked in: act_mirred cls_matchall ip6_gre ip6_tunnel tunnel6 gre sch_ingress vrf veth x86_pkg_temp_thermal mlx_platform nfsd e1000e leds_mlxcpld
[  158.602268] CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 4.17.0-rc4-net_master-custom-139 #10
[  158.610938] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016
[  158.620426] RIP: 0010:skb_panic+0xc3/0x100
[  158.624586] RSP: 0018:ffff8801d3f27110 EFLAGS: 00010286
[  158.629882] RAX: 0000000000000082 RBX: ffff8801c02cc040 RCX: 0000000000000000
[  158.637127] RDX: 0000000000000082 RSI: dffffc0000000000 RDI: ffffed003a7e4e18
[  158.644366] RBP: ffff8801bfec8020 R08: ffffed003aabce19 R09: ffffed003aabce19
[  158.651574] R10: 000000000000000b R11: ffffed003aabce18 R12: ffff8801c364de66
[  158.658786] R13: 000000000000002c R14: 00000000000000c0 R15: ffff8801c364de68
[  158.666007] FS:  0000000000000000(0000) GS:ffff8801d5400000(0000) knlGS:0000000000000000
[  158.674212] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  158.680036] CR2: 00007f4b3702dcd0 CR3: 0000000003228002 CR4: 00000000001606e0
[  158.687228] Call Trace:
[  158.689752]  ? __gre6_xmit+0x246/0xd80 [ip6_gre]
[  158.694475]  ? __gre6_xmit+0x246/0xd80 [ip6_gre]
[  158.699141]  skb_push+0x78/0x90
[  158.702344]  __gre6_xmit+0x246/0xd80 [ip6_gre]
[  158.706872]  ip6gre_tunnel_xmit+0x3bc/0x610 [ip6_gre]
[  158.711992]  ? __gre6_xmit+0xd80/0xd80 [ip6_gre]
[  158.716668]  ? debug_check_no_locks_freed+0x210/0x210
[  158.721761]  ? print_irqtrace_events+0x120/0x120
[  158.726461]  ? sched_clock_cpu+0x18/0x210
[  158.730572]  ? sched_clock_cpu+0x18/0x210
[  158.734692]  ? cyc2ns_read_end+0x10/0x10
[  158.738705]  ? skb_network_protocol+0x76/0x200
[  158.743216]  ? netif_skb_features+0x1b2/0x550
[  158.747648]  dev_hard_start_xmit+0x137/0x770
[  158.752010]  sch_direct_xmit+0x2ef/0x5d0
[  158.755992]  ? pfifo_fast_dequeue+0x3fa/0x670
[  158.760460]  ? pfifo_fast_change_tx_queue_len+0x810/0x810
[  158.765975]  ? __lock_is_held+0xa0/0x160
[  158.770002]  __qdisc_run+0x39e/0xfc0
[  158.773673]  ? _raw_spin_unlock+0x29/0x40
[  158.777781]  ? pfifo_fast_enqueue+0x24b/0x3e0
[  158.782191]  ? sch_direct_xmit+0x5d0/0x5d0
[  158.786372]  ? pfifo_fast_dequeue+0x670/0x670
[  158.790818]  ? __dev_queue_xmit+0x172/0x1770
[  158.795195]  ? preempt_count_sub+0xf/0xd0
[  158.799313]  __dev_queue_xmit+0x410/0x1770
[  158.803512]  ? ___slab_alloc+0x605/0x930
[  158.807525]  ? ___slab_alloc+0x605/0x930
[  158.811540]  ? memcpy+0x34/0x50
[  158.814768]  ? netdev_pick_tx+0x1c0/0x1c0
[  158.818895]  ? __skb_clone+0x2fd/0x3d0
[  158.822712]  ? __copy_skb_header+0x270/0x270
[  158.827079]  ? rcu_read_lock_sched_held+0x93/0xa0
[  158.831903]  ? kmem_cache_alloc+0x344/0x4d0
[  158.836199]  ? skb_clone+0x123/0x230
[  158.839869]  ? skb_split+0x820/0x820
[  158.843521]  ? tcf_mirred+0x554/0x930 [act_mirred]
[  158.848407]  tcf_mirred+0x554/0x930 [act_mirred]
[  158.853104]  ? tcf_mirred_act_wants_ingress.part.2+0x10/0x10 [act_mirred]
[  158.860005]  ? __lock_acquire+0x706/0x26e0
[  158.864162]  ? mark_lock+0x13d/0xb40
[  158.867832]  tcf_action_exec+0xcf/0x2a0
[  158.871736]  tcf_classify+0xfa/0x340
[  158.875402]  __netif_receive_skb_core+0x8e1/0x1c60
[  158.880334]  ? nf_ingress+0x500/0x500
[  158.884059]  ? process_backlog+0x347/0x4b0
[  158.888241]  ? lock_acquire+0xd8/0x320
[  158.892050]  ? process_backlog+0x1b6/0x4b0
[  158.896228]  ? process_backlog+0xc2/0x4b0
[  158.900291]  process_backlog+0xc2/0x4b0
[  158.904210]  net_rx_action+0x5cc/0x980
[  158.908047]  ? napi_complete_done+0x2c0/0x2c0
[  158.912525]  ? rcu_read_unlock+0x80/0x80
[  158.916534]  ? __lock_is_held+0x34/0x160
[  158.920541]  __do_softirq+0x1d4/0x9d2
[  158.924308]  ? trace_event_raw_event_irq_handler_exit+0x140/0x140
[  158.930515]  run_ksoftirqd+0x1d/0x40
[  158.934152]  smpboot_thread_fn+0x32b/0x690
[  158.938299]  ? sort_range+0x20/0x20
[  158.941842]  ? preempt_count_sub+0xf/0xd0
[  158.945940]  ? schedule+0x5b/0x140
[  158.949412]  kthread+0x206/0x300
[  158.952689]  ? sort_range+0x20/0x20
[  158.956249]  ? kthread_stop+0x570/0x570
[  158.960164]  ret_from_fork+0x3a/0x50
[  158.963823] Code: 14 3e ff 8b 4b 78 55 4d 89 f9 41 56 41 55 48 c7 c7 a0 cf db 82 41 54 44 8b 44 24 2c 48 8b 54 24 30 48 8b 74 24 20 e8 16 94 13 ff <0f> 0b 48 c7 c7 60 8e 1f 85 48 83 c4 20 e8 55 ef a6 ff 89 74 24
[  158.983235] RIP: skb_panic+0xc3/0x100 RSP: ffff8801d3f27110
[  158.988935] ---[ end trace 5af56ee845aa6cc8 ]---
[  158.993641] Kernel panic - not syncing: Fatal exception in interrupt
[  159.000176] Kernel Offset: disabled
[  159.003767] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Reproducer:

	ip link add h1 type veth peer name swp1
	ip link add h3 type veth peer name swp3

	ip link set dev h1 up
	ip address add 192.0.2.1/28 dev h1

	ip link add dev vh3 type vrf table 20
	ip link set dev h3 master vh3
	ip link set dev vh3 up
	ip link set dev h3 up

	ip link set dev swp3 up
	ip address add dev swp3 2001:db8:2::1/64

	ip link set dev swp1 up
	tc qdisc add dev swp1 clsact

	ip link add name gt6 type ip6gretap \
		local 2001:db8:2::1 remote 2001:db8:2::2
	ip link set dev gt6 up

	sleep 1

	tc filter add dev swp1 ingress pref 1000 matchall skip_hw \
		action mirred egress mirror dev gt6
	ping -I h1 192.0.2.2

Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:50:06 -04:00
Gustavo A. R. Silva
a78622932c bpf: sockmap, fix double-free
`e' is being freed twice.

Fix this by removing one of the kfree() calls.

Addresses-Coverity-ID: 1468983 ("Double free")
Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-17 22:44:49 +02:00
Gustavo A. R. Silva
0e43645603 bpf: sockmap, fix uninitialized variable
There is a potential execution path in which variable err is
returned without being properly initialized previously.

Fix this by initializing variable err to 0.

Addresses-Coverity-ID: 1468964 ("Uninitialized scalar variable")
Fixes: e5cd3abcb3 ("bpf: sockmap, refactor sockmap routines to work with hashmap")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-17 22:44:43 +02:00
Alexandre Belloni
94389b28ba rtc: rx8581: switch to regmap
Switch to regmap to simplify handling block read/write.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:43:22 +02:00
Alexandre Belloni
6e6111f6c0 rtc: rx8581: error out when time invalid
Return an error when the date is unreliable because the battery is low.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:43:22 +02:00
Richard Guy Briggs
38f8059048 audit: normalize loginuid read access
Recognizing that the loginuid is an internal audit value, use an access
function to retrieve the audit loginuid value for the task rather than
reaching directly into the task struct to get it.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-17 16:41:19 -04:00
Alexandre Belloni
ed87c6d86d rtc: rx8581: remove useless declaration
The rx8581_driver forward declaration is useless, remove it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:37:19 +02:00
Alexandre Belloni
2d2b300b38 rtc: rx8581: remove useless indirection
rx8581_get_datetime and rx8581_set_datetime are only used after casting dev
to an i2c_client. Remove that useless indirection.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:37:18 +02:00
Alexandre Belloni
c6e3c297a1 rtc: rx8581: let the core handle rtc range
Let the core handle offsetting and windowing the RTC range.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:37:16 +02:00
Alexandre Belloni
86c54ef6e6 rtc: rx8581: add RTC range
The rx8581 can support dates from 01/01/2000 to 31/12/2099.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:37:14 +02:00
Alexandre Belloni
b815716820 rtc: rx8581: switch to rtc_register_device
This allows for future improvement of the driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:37:12 +02:00
Alexandre Belloni
57ad9e6925 rtc: tps65910: add range
The tps65910 RTC can support dates from 01/01/2000 to 31/12/2099.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:37:11 +02:00
Alexandre Belloni
ee366c7a0e rtc: tps65910: allow platform power up
Currently, the IRQs are disabled when the rtc driver is removed (e.g. when
shutting down the platform).
This means that the RTC will be unable to power up the platform.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:37:09 +02:00
Alexandre Belloni
e6000a438e rtc: tps65910: fix possible race condition
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.

Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:37:07 +02:00
Roman Mashak
7c5995b33d tc-testing: fixed copy-pasting error in ife tests
Reported-by: Vlad Buslov <vladbu@mellanox.com>
Reported-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:31:43 -04:00
Dan Carpenter
990a9d4975 net/ncsi: prevent a couple array underflows
We recently refactored this code and introduced a static checker
warning.  Smatch complains that if cmd->index is zero then we would
underflow the arrays.  That's obviously true.

The question is whether we prevent cmd->index from being zero at a
different level.  I've looked at the code and I don't immediately see
a check for that.

Fixes: 062b3e1b6d ("net/ncsi: Refactor MAC, VLAN filters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:27:39 -04:00
Eric Dumazet
be7f3e5999 net/smc: init conn.tx_work & conn.send_lock sooner
syzkaller found that following program crashes the host :

{
  int fd = socket(AF_SMC, SOCK_STREAM, 0);
  int val = 1;

  listen(fd, 0);
  shutdown(fd, SHUT_RDWR);
  setsockopt(fd, 6, TCP_NODELAY, &val, 4);
}

Simply initialize conn.tx_work & conn.send_lock at socket creation,
rather than deeper in the stack.

ODEBUG: assert_init not available (active state 0) object type: timer_list hint:           (null)
WARNING: CPU: 1 PID: 13988 at lib/debugobjects.c:329 debug_print_object+0x16a/0x210 lib/debugobjects.c:326
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 13988 Comm: syz-executor0 Not tainted 4.17.0-rc4+ #46
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 panic+0x22f/0x4de kernel/panic.c:184
 __warn.cold.8+0x163/0x1b3 kernel/panic.c:536
 report_bug+0x252/0x2d0 lib/bug.c:186
 fixup_bug arch/x86/kernel/traps.c:178 [inline]
 do_error_trap+0x1de/0x490 arch/x86/kernel/traps.c:296
 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992
RIP: 0010:debug_print_object+0x16a/0x210 lib/debugobjects.c:326
RSP: 0018:ffff880197a37880 EFLAGS: 00010086
RAX: 0000000000000061 RBX: 0000000000000005 RCX: ffffc90001ed0000
RDX: 0000000000004aaf RSI: ffffffff8160f6f1 RDI: 0000000000000001
RBP: ffff880197a378c0 R08: ffff8801aa7a0080 R09: ffffed003b5e3eb2
R10: ffffed003b5e3eb2 R11: ffff8801daf1f597 R12: 0000000000000001
R13: ffffffff88d96980 R14: ffffffff87fa19a0 R15: ffffffff81666ec0
 debug_object_assert_init+0x309/0x500 lib/debugobjects.c:692
 debug_timer_assert_init kernel/time/timer.c:724 [inline]
 debug_assert_init kernel/time/timer.c:776 [inline]
 del_timer+0x74/0x140 kernel/time/timer.c:1198
 try_to_grab_pending+0x439/0x9a0 kernel/workqueue.c:1223
 mod_delayed_work_on+0x91/0x250 kernel/workqueue.c:1592
 mod_delayed_work include/linux/workqueue.h:541 [inline]
 smc_setsockopt+0x387/0x6d0 net/smc/af_smc.c:1367
 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903
 __do_sys_setsockopt net/socket.c:1914 [inline]
 __se_sys_setsockopt net/socket.c:1911 [inline]
 __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 01d2f7e2cd ("net/smc: sockopts TCP_NODELAY and TCP_CORK")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ursula Braun <ubraun@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:25:35 -04:00
Jiri Pirko
3b734ff604 nfp: flower: fix error path during representor creation
Don't store repr pointer to reprs array until the representor is
successfully created. This avoids message about "representor
destruction" even when it was never created. Also it cleans-up the flow.
Also, check return value after port alloc.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:23:29 -04:00
Alexandre Belloni
c402f8ead6 rtc: ab-b5ze-s3: let the core handle the RTC range
The ab-b5ze-s3 RTC is storing the year in an 8bit bcd coded register so it
can handle dates from year 2000 to year 2099.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:23:25 +02:00
Alexandre Belloni
8bde032b28 rtc: ab-b5ze-s3: fix possible race conditions
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.

Also, the probe function is not allowed to fail after the RTC is registered
because the following may happen:

CPU0:                                CPU1:
sys_load_module()
 do_init_module()
  do_one_initcall()
   cmos_do_probe()
    rtc_device_register()
     __register_chrdev()
     cdev->owner = struct module*
                                     open("/dev/rtc0")
    rtc_device_unregister()
  module_put()
  free_module()
   module_free(mod->module_core)
   /* struct module *module is now
      freed */
                                      chrdev_open()
                                       spin_lock(cdev_lock)
                                       cdev_get()
                                        try_module_get()
                                         module_is_live()
                                         /* dereferences already
                                            freed struct module* */

Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ and register the RTC as late as possible.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:23:23 +02:00
Alexandre Belloni
02f3712f1f rtc: 88pm80x: convert to rtc_tm_to_time64/rtc_time64_to_tm
Now that the RTC range is properly checked, convert the driver to
rtc_tm_to_time64/rtc_time64_to_tm

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:23:21 +02:00
Alexandre Belloni
39ba69427a rtc: 88pm80x: let the core handle the RTC range
The 88pm80x RTC is storing the time as a 32bit offset from a 32bit counter
so it can handle dates from 0 to U32_MAX.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:23:20 +02:00
Alexandre Belloni
661eb89a11 rtc: 88pm80x: fix possible race condition
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.

Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:23:18 +02:00
Alexandre Belloni
ba78d51bdf rtc: 88pm80x: remove unused pm80x_rtc_info members
pm80x_rtc_info.calib_work and pm80x_rtc_info.vrtc are never used, remove
them.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:23:17 +02:00
Alexandre Belloni
48b29c7fc2 rtc: 88pm80x: stop setting a default time
It doesn't make sense to set the RTC to a default value at probe time. Let
the core handle invalid date and time.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:23:15 +02:00
Alexandre Belloni
6c78a872a6 rtc: at91rm9200: add range
The at91rm9200 RTC can support dates from 1900-01-01 00:00:00 to 2099-12-31
23:59:59.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17 22:23:14 +02:00
David S. Miller
6d9f868fc7 Merge branch 'mvpp2-small-improvements'
Antoine Tenart says:

====================
net: mvpp2: small improvements

Those 3 patches are small improvements to the Marvell PPv2 driver. The
series does not conflict with the one sent about phylink and
1000/2500baseX support, so the two series can live in parallel.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:18:55 -04:00
Yan Markman
934e0f8330 net: mvpp2: print rx error with rate-limit
Prevent flood of RX error prints during heavy traffic with weak signal
in link by checking net_ratelimit() before using netdev_err().

Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: small rework, commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:18:55 -04:00
Yan Markman
5b0ab2f41d net: mvpp2: set mac address does not require the stop/start sequence
Remove special stop/start handling from the set_mac_address callback.
All this special care is not needed, and can be removed. It also
simplifies the up/down status in the driver and helps avoiding possible
link status mismatch issues.

Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:18:54 -04:00
Yan Markman
914365f1c9 net: mvpp2: avoid checking for free aggregated descriptors twice
Avoid repeating the check for free aggregated descriptors when it
already failed at the beginning of the function.

Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:18:54 -04:00
Jesper Dangaard Brouer
deea81228b selftests/bpf: check return value of fopen in test_verifier.c
Commit 0a67487403 ("selftests/bpf: Only run tests if !bpf_disabled")
forgot to check return value of fopen.

This caused some confusion, when running test_verifier (from
tools/testing/selftests/bpf/) on an older kernel (< v4.4) as it will
simply seqfault.

This fix avoids the segfault and prints an error, but allow program to
continue.  Given the sysctl was introduced in 1be7f75d16 ("bpf:
enable non-root eBPF programs"), we know that the running kernel
cannot support unpriv, thus continue with unpriv_disabled = true.

Fixes: 0a67487403 ("selftests/bpf: Only run tests if !bpf_disabled")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-17 22:18:46 +02:00
David S. Miller
808e2fc3b0 Merge branch 'mvpp2-phylink-conversion'
Antoine Tenart says:

====================
net: mvpp2: phylink conversion

This series convert the Marvell PPv2 driver to phylink (models the MAC
to PHY link).

One important point is the PPv2 driver supports two probe modes: device
tree and ACPI. This series only brings phylink support for the device
tree mode, as the ACPI one will need further work. Still, the driver
should be working as before when using ACPI. This split should be
temporary, and was discussed with Marcin (in Cc.) who added ACPI support
to the driver.

Also as the SFP cages on both DB boards can be considered as non-wired.
We thus chose not to describe those SFP cages and we use fixed-link.

The rest of the series uses phylink to add support for 1000BaseX and
2500BaseX modes in the PPv2 driver. To do this, two patches are needed
in the common PHY framework (patches 3 and 4). The last 4 patches modify
the device tree to use the new PPv2 functionalities.

The series has been tested for the device tree mode on the 7040-db,
8040-db and 8040-mcbin boards, to ensure all the interface where working
as expected.

@Dave: patches 7 to 10 should go through the mvebu tree (Gregory in
Cc.) to avoid any conflict with the other mvebu dt patches taken during
this cycle.

The series is based on today's net-next.

Since v2:
  - Removed the SFP description from the DB boards, as their SFP cages
    are wired properly. We now use fixed-link.
  - Because of this rework, split the series in two, so that the SFP
    part is reviewed separately.
  - Small fixes in the phylink patch.
  - Rebased on the latest net-next branch.

Since v1:
  - Chose a different approach to the SFP changes, as the previous ones
    weren't valid and reworked both BD boards device trees.
  - Misc fixes.
  - Added Kishon's acked-by on one patch.
  - Rebaed on latest net-next branch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:11:40 -04:00
Antoine Tenart
a6fe31de86 net: mvpp2: 2500baseX support
This patch adds the 2500Base-X PHY mode support in the Marvell PPv2
driver. 2500Base-X is quite close to 1000Base-X and SGMII modes and uses
nearly the same code path.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:11:40 -04:00
Antoine Tenart
d97c9f4ab0 net: mvpp2: 1000baseX support
This patch adds the 1000Base-X PHY mode support in the Marvell PPv2
driver. 1000Base-X is quite close the SGMII and uses nearly the same
code path.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:11:40 -04:00
Antoine Tenart
9ad8bd819b phy: cp110-comphy: 2.5G SGMII mode
This patch allow the CP110 comphy to configure some lanes in the
2.5G SGMII mode. This mode is quite close to SGMII and uses nearly the
same code path.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:11:40 -04:00
Antoine Tenart
5490b8725d phy: add 2.5G SGMII mode to the phy_mode enum
This patch adds one more generic PHY mode to the phy_mode enum, to allow
configuring generic PHYs to the 2.5G SGMII mode by using the set_mode
callback.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:11:39 -04:00
Antoine Tenart
4bb0432628 net: mvpp2: phylink support
Convert the PPv2 driver to implement phylink helpers, and use phylink in
DT mode. The other mode supported is ACPI, which will need further work
in order to be entirely compatible with phylink.

The MAC and GoP configuration functions were completely moved to fit
into the phylink helpers. When a PHY is always present between the MAC
and the physical port, phylink only is used, but when this is not the
case (the MAC directly is connected to the physical port) the link IRQ
is used to detect changes in the link state and call phylink_mac_change.

The ACPI mode do not uses phylink as of now, and the changes shouldn't
impact its use.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:11:39 -04:00
Antoine Tenart
dcd3e73ae7 net: mvpp2: align the ethtool ops definition
Cosmetic patch to align the ethtool functions to ops definitions. This
patch does not change in any way the driver's behaviour.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:11:39 -04:00
Linus Torvalds
e4b4e44132 fs/proc: re-factor proc_pid_cmdline_read() a bit
This is a pure refactoring of the function, preparing for some further
cleanups.  The thing was pretty illegible, and the core functionality
still is, but now the core loop is a bit more isolated from the thing
that goes on around it.

This was "inspired" by the confluence of kworker workqueue name cleanups
by Tejun, currently scheduled for 4.18, and commit 7f7ccc2ccc ("proc:
do not access cmdline nor environ from file-backed areas").

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-17 13:04:17 -07:00
David S. Miller
a564b659bb wireless-drivers-next patches for 4.18
The first pull request for 4.18. As usual new features and bug fixes
 but nothing really special.
 
 I also merged wireless-drivers due to an iwlwifi patch dependency.
 
 Major changes:
 
 iwlwifi
 
 * implement Traffic Condition Monitor and use it for scan, BT coex and
   to detect when the AP doesn't support UAPSD properly
 
 * some more work for the 22000 family of devices;
 
 * introduce AMSDU rate control offload
 
 qtnfmac
 
 * DFS offload support
 
 rsi
 
 * roaming enhancements
 
 * increase max supported aggregation subframes
 
 * don't advertise 5 GHz support if the device doesn't support it
 
 brcmfmac
 
 * add support for BCM4366E chipset
 
 * add support for bcm43364 wireless chipset
 
 ath10k
 
 * enable temperature reads for QCA6174 and QCA9377
 
 * add firmware memory dump support for QCA9984
 
 * continue adding WCN3990 support via SNOC bus
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJa/TreAAoJEG4XJFUm622boV0IAI/tTu3obIdhdlnZJsjat/wH
 tmQX2rZl0g7kbthVU+WqPA1KgvK/HEX1SUIP0leARl6FDqxrBzE1G4P1fOY3JIaZ
 +T3UG9LgFM3hoXtJ1VRdvi8rTBVU67TTOrQCVD7AapGWfQwn6AXfy4ARUEqBjkrA
 SxDemdAwIks3miMU3EnsRlzLaI56R7l1mk0Xr30tM5Coq721AcWE6FBz6lqmFnTC
 3vdDzpMRIiTt5zLICJZYgAB3akiaJEqHnIAv+y0sbXG1gHDhKcfEH674SM6FCB2N
 3TP7EpzzxH/FYB0i+zOFg6wnAqUngLLnwkG/ciniVi75feb+gbaKqWHT8FNfx04=
 =rF/V
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2018-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.18

The first pull request for 4.18. As usual new features and bug fixes
but nothing really special.

I also merged wireless-drivers due to an iwlwifi patch dependency.

Major changes:

iwlwifi

* implement Traffic Condition Monitor and use it for scan, BT coex and
  to detect when the AP doesn't support UAPSD properly

* some more work for the 22000 family of devices;

* introduce AMSDU rate control offload

qtnfmac

* DFS offload support

rsi

* roaming enhancements

* increase max supported aggregation subframes

* don't advertise 5 GHz support if the device doesn't support it

brcmfmac

* add support for BCM4366E chipset

* add support for bcm43364 wireless chipset

ath10k

* enable temperature reads for QCA6174 and QCA9377

* add firmware memory dump support for QCA9984

* continue adding WCN3990 support via SNOC bus
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 16:00:40 -04:00
Richard Guy Briggs
8982a1fbe0 audit: use new audit_context access funciton for seccomp_actions_logged
On the rebase of the following commit on the new seccomp actions_logged
function, one audit_context access was missed.

commit cdfb6b341f
("audit: use inline function to get audit context")

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-17 15:56:20 -04:00
YueHaibing
93c65d13d8 vmxnet3: Replace msleep(1) with usleep_range()
As documented in Documentation/timers/timers-howto.txt,
replace msleep(1) with usleep_range().

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:55:38 -04:00
Sandipan Das
1961018469 perf script: Show virtual addresses instead of offsets
When perf data is recorded with the call-graph option enabled, the
callchain shown by perf script shows the binary offsets of the symbols
as the ip. This is incorrect for kernel symbols as the ip values are
always off by a fixed offset depending on the architecture. If the
offsets from the start of the symbols are printed, they are also
incorrect for both kernel and userspace symbols.

Without the call-graph option, the callchain shows the virtual addresses
of the symbols rather than their binary offsets. The offsets printed in
this case are also correct.

This fixes the inconsistency in perf script's output.

This can be verified on a powerpc64le system running Fedora 27 as
follows:

  # cat /proc/kallsyms | grep sys_write
  ...
  c0000000004025a0 T sys_write
  c0000000004025a0 T __se_sys_write
  ...

  # perf probe -a sys_write

Before applying this patch:

  # perf record -e probe:sys_write -g ~/test
  # perf script -F ip,sym,symoff

                    4125b0 sys_write+0x8000000000008010
                     1b9e0 system_call+0x8000000000008058
                    118234 __GI___libc_write+0xffff0000f52c0024
                     92c74 _IO_file_write@@GLIBC_2.17+0xffff0000f52c0044
                  5afbfd8a [unknown]
                     91a60 new_do_write+0xffff0000f52c0090
                     94638 _IO_do_write@@GLIBC_2.17+0xffff0000f52c0038
                     94bbc _IO_file_overflow@@GLIBC_2.17+0xffff0000f52c014c
                     95a24 __overflow+0xffff0000f52c0064
                     84548 _IO_puts+0xffff0000f52c0218
                       440 main+0xffffffffe0000020
                     236a0 generic_start_main.isra.0+0xffff0000f52c0140
                     23898 __libc_start_main+0xffff0000f52c00b8
                         0 [unknown]
  ...

  # perf record -e probe:sys_write ~/test
  # perf script -F ip,sym,symoff

  c0000000004025b0 sys_write+0x10
  ...

After applying this patch:

  # perf record -e probe:sys_write -g ~/test
  # perf script -F ip,sym,symoff

          c0000000004025b0 sys_write+0x10
          c00000000000b9e0 system_call+0x58
              7fffb70d8234 __GI___libc_write+0x24
              7fffb7052c74 _IO_file_write@@GLIBC_2.17+0x44
                  5afc1818 [unknown]
              7fffb7051a60 new_do_write+0x90
              7fffb7054638 _IO_do_write@@GLIBC_2.17+0x38
              7fffb7054bbc _IO_file_overflow@@GLIBC_2.17+0x14c
              7fffb7055a24 __overflow+0x64
              7fffb7044548 _IO_puts+0x218
                  10000440 main+0x20
              7fffb6fe36a0 generic_start_main.isra.0+0x140
              7fffb6fe3898 __libc_start_main+0xb8
                         0 [unknown]
  ...

  # perf record -e probe:sys_write ~/test
  # perf script -F ip,sym,symoff

  c0000000004025b0 sys_write+0x10
  ...

Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180517063326.6319-1-sandipan@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-17 16:55:29 -03:00
Chris Wilson
560f6ad8ed drm/i915: Remove unused enable_cmd_parser modparam
The command parser is feature complete, stable and required by
userspace. In commit 41736a8e33 ("drm/i915: Use the precomputed value
for whether to enable command parsing") I accidentally removed control
from the modparam, and as no one has complained, remove the left
over modparam completely!

References: 41736a8e33 ("drm/i915: Use the precomputed value for whether to enable command parsing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517150727.10431-1-chris@chris-wilson.co.uk
2018-05-17 20:52:39 +01:00
Tonghao Zhang
7e878b605f bonding: introduce link change helper
Introduce an new common helper to avoid redundancy.

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:51:13 -04:00
Chris Wilson
96d4f03c20 drm/i915: Nul-terminate legacy debug string
Make sure that when we don't have any scheduler attributes for the
request, the string is terminated.

Fixes: 247870ac8e ("drm/i915: Build request info on stack before printk")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517152824.11619-1-chris@chris-wilson.co.uk
2018-05-17 20:50:28 +01:00
William Tu
02f99df187 erspan: fix invalid erspan version.
ERSPAN only support version 1 and 2.  When packets send to an
erspan device which does not have proper version number set,
drop the packet.  In real case, we observe multicast packets
sent to the erspan pernet device, erspan0, which does not have
erspan version configured.

Reported-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:48:49 -04:00
David S. Miller
10e361e100 Merge branch 'tcp-default-RACK-loss-recovery'
Yuchung Cheng says:

====================
tcp: default RACK loss recovery

This patch set implements the features correspond to the
draft-ietf-tcpm-rack-03 version of the RACK draft.
https://datatracker.ietf.org/meeting/101/materials/slides-101-tcpm-update-on-tcp-rack-00

1. SACK: implement equivalent DUPACK threshold heuristic in RACK to
   replace existing RFC6675 recovery (tcp_mark_head_lost).

2. Non-SACK: simplify RFC6582 NewReno implementation

3. RTO: apply RACK's time-based approach to avoid spuriouly
   marking very recently sent packets lost.

4. with (1)(2)(3), make RACK the exclusive fast recovery mechanism to
   mark losses based on time on S/ACK. Tail loss probe and F-RTO remain
   enabled by default as complementary mechanisms to send probes in
   CA_Open and CA_Loss states. The probes would solicit S/ACKs to trigger
   RACK time-based loss detection.

All Google web and internal servers have been running RACK-only mode
(4) for a while now. a/b experiments indicate RACK/TLP on average
reduces recovery latency by 10% compared to RFC6675. RFC6675
is default-off now but can be enabled by disabling RACK (sysctl
net.ipv4.tcp_recovery=0) for unseen issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:41:30 -04:00