Commit graph

783,042 commits

Author SHA1 Message Date
Nikita V. Shirokov
587b80cce9 bpf: making bpf_prog_test run aware of possible data_end ptr change
after introduction of bpf_xdp_adjust_tail helper packet length
could be changed not only if xdp->data pointer has been changed
but xdp->data_end as well. making bpf_prog_test_run aware of this
possibility

Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-18 23:34:16 +02:00
Nikita V. Shirokov
6870de435b bpf: make virtio compatible w/ bpf_xdp_adjust_tail
w/ bpf_xdp_adjust_tail helper xdp's data_end pointer could be changed as
well (only "decrease" of pointer's location is going to be supported).
changing of this pointer will change packet's size.
for virtio driver we need to adjust XDP_PASS handling by recalculating
length of the packet if it was passed to the TCP/IP stack

Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-18 23:34:16 +02:00
Nikita V. Shirokov
8fb58f1ecf bpf: make tun compatible w/ bpf_xdp_adjust_tail
w/ bpf_xdp_adjust_tail helper xdp's data_end pointer could be changed as
well (only "decrease" of pointer's location is going to be supported).
changing of this pointer will change packet's size.
for tun driver we need to adjust XDP_PASS handling by recalculating
length of the packet if it was passed to the TCP/IP stack
(in case if after xdp's prog run data_end pointer was adjusted)

Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-18 23:34:16 +02:00
Nikita V. Shirokov
5a6a22e378 bpf: make netronome nfp compatible w/ bpf_xdp_adjust_tail
w/ bpf_xdp_adjust_tail helper xdp's data_end pointer could be changed as
well (only "decrease" of pointer's location is going to be supported).
changing of this pointer will change packet's size.
for nfp driver we will just calculate packet's length unconditionally

Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-18 23:34:16 +02:00
Nikita V. Shirokov
a48ce00f9a bpf: make cavium thunder compatible w/ bpf_xdp_adjust_tail
w/ bpf_xdp_adjust_tail helper xdp's data_end pointer could be changed as
well (only "decrease" of pointer's location is going to be supported).
changing of this pointer will change packet's size.
for cavium's thunder driver we will just calculate packet's length
unconditionally

Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-18 23:34:16 +02:00
Nikita V. Shirokov
b968e735c7 bpf: make bnxt compatible w/ bpf_xdp_adjust_tail
w/ bpf_xdp_adjust_tail helper xdp's data_end pointer could be changed as
well (only "decrease" of pointer's location is going to be supported).
changing of this pointer will change packet's size.
for bnxt driver we will just calculate packet's length unconditionally

Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-18 23:34:16 +02:00
Nikita V. Shirokov
e5e0a59b7c bpf: make mlx4 compatible w/ bpf_xdp_adjust_tail
w/ bpf_xdp_adjust_tail helper xdp's data_end pointer could be changed as
well (only "decrease" of pointer's location is going to be supported).
changing of this pointer will change packet's size.
for mlx4 driver we will just calculate packet's length unconditionally
(the same way as it's already being done in mlx5)

Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-18 23:34:16 +02:00
Nikita V. Shirokov
198d83bb3b bpf: make generic xdp compatible w/ bpf_xdp_adjust_tail
w/ bpf_xdp_adjust_tail helper xdp's data_end pointer could be changed as
well (only "decrease" of pointer's location is going to be supported).
changing of this pointer will change packet's size.
for generic XDP we need to reflect this packet's length change by
adjusting skb's tail pointer

Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-18 23:34:16 +02:00
Nikita V. Shirokov
b32cc5b9a3 bpf: adding bpf_xdp_adjust_tail helper
Adding new bpf helper which would allow us to manipulate
xdp's data_end pointer, and allow us to reduce packet's size
indended use case: to generate ICMP messages from XDP context,
where such message would contain truncated original packet.

Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-18 23:34:16 +02:00
Bjorn Helgaas
9ab105deb6 PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTR
When in the ASPM L1.0 state (but not the PCI-PM L1.0 state), the most
recent LTR value and the LTR_L1.2_THRESHOLD determines whether the link
enters the L1.2 substate.

If we don't have LTR enabled, prevent the use of ASPM L1.2.

PCI-PM L1.2 may still be used because it doesn't depend on
LTR_L1.2_THRESHOLD (see PCIe r4.0, sec 5.5.1).

Tested-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-18 16:10:34 -05:00
Matt Redfearn
b3d7e55c3f
MIPS: uaccess: Add micromips clobbers to bzero invocation
The micromips implementation of bzero additionally clobbers registers t7
& t8. Specify this in the clobbers list when invoking bzero.

Fixes: 26c5e07d14 ("MIPS: microMIPS: Optimise 'memset' core library function.")
Reported-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.10+
Patchwork: https://patchwork.linux-mips.org/patch/19110/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-18 22:02:29 +01:00
Thomas Richter
be71eda538 module: Fix display of wrong module .text address
Reading file /proc/modules shows the correct address:
[root@s35lp76 ~]# cat /proc/modules | egrep '^qeth_l2'
qeth_l2 94208 1 - Live 0x000003ff80401000

and reading file /sys/module/qeth_l2/sections/.text
[root@s35lp76 ~]# cat /sys/module/qeth_l2/sections/.text
0x0000000018ea8363
displays a random address.

This breaks the perf tool which uses this address on s390
to calculate start of .text section in memory.

Fix this by printing the correct (unhashed) address.

Thanks to Jessica Yu for helping on this.

Fixes: ef0010a309 ("vsprintf: don't use 'restricted_pointer()' when not restricting")
Cc: <stable@vger.kernel.org> # v4.15+
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2018-04-18 22:59:46 +02:00
Matt Redfearn
c96eebf076
MIPS: memset.S: Fix clobber of v1 in last_fixup
The label .Llast_fixup\@ is jumped to on page fault within the final
byte set loop of memset (on < MIPSR6 architectures). For some reason, in
this fault handler, the v1 register is randomly set to a2 & STORMASK.
This clobbers v1 for the calling function. This can be observed with the
following test code:

static int __init __attribute__((optimize("O0"))) test_clear_user(void)
{
  register int t asm("v1");
  char *test;
  int j, k;

  pr_info("\n\n\nTesting clear_user\n");
  test = vmalloc(PAGE_SIZE);

  for (j = 256; j < 512; j++) {
    t = 0xa5a5a5a5;
    if ((k = clear_user(test + PAGE_SIZE - 256, j)) != j - 256) {
        pr_err("clear_user (%px %d) returned %d\n", test + PAGE_SIZE - 256, j, k);
    }
    if (t != 0xa5a5a5a5) {
       pr_err("v1 was clobbered to 0x%x!\n", t);
    }
  }

  return 0;
}
late_initcall(test_clear_user);

Which demonstrates that v1 is indeed clobbered (MIPS64):

Testing clear_user
v1 was clobbered to 0x1!
v1 was clobbered to 0x2!
v1 was clobbered to 0x3!
v1 was clobbered to 0x4!
v1 was clobbered to 0x5!
v1 was clobbered to 0x6!
v1 was clobbered to 0x7!

Since the number of bytes that could not be set is already contained in
a2, the andi placing a value in v1 is not necessary and actively
harmful in clobbering v1.

Reported-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/19109/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-18 21:57:29 +01:00
Chris Wilson
b7268c5eed drm/i915: Pack params to engine->schedule() into a struct
Today we only want to pass along the priority to engine->schedule(), but
in the future we want to have much more control over the various aspects
of the GPU during a context's execution, for example controlling the
frequency allowed. As we need an ever growing number of parameters for
scheduling, move those into a struct for convenience.

v2: Move the anonymous struct into its own function for legibility and
ye olde gcc.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418184052.7129-3-chris@chris-wilson.co.uk
2018-04-18 21:09:11 +01:00
Chris Wilson
0c7112a002 drm/i915: Rename priotree to sched
Having moved the priotree struct into i915_scheduler.h, identify it as
the scheduling element and rebrand into i915_sched. This becomes more
useful as we start attaching more information we require to propagate
through the scheduler.

v2: Use i915_sched_node for future distinctiveness

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418184052.7129-2-chris@chris-wilson.co.uk
2018-04-18 21:09:09 +01:00
Chris Wilson
98ff5c7830 drm/i915: Move the priotree struct to its own headers
Over time the priotree has grown from a sorted list to a more
complicated structure for propagating constraints along the dependency
chain to try and resolve priority inversion. Start to segregate this
information from the rest of the request/fence tracking.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418184052.7129-1-chris@chris-wilson.co.uk
2018-04-18 21:09:08 +01:00
Linus Torvalds
87ef12027b A couple of follow-up patches for -rc1 changes in rbd, support for
a timeout on waiting for the acquisition of exclusive lock and a fix
 for uninitialized memory access in CephFS, marked for stable.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJa11lwAAoJEEp/3jgCEfOL1vIH/2kQBY8IVm8ogdZNE9SzSfDO
 loqLX5Wv/4zcCRKss4bgX4agapDgKwoDwGaJPJCeWIE6IC5n2ytcLeIDMYE7UT/i
 H5yIvMqlG2PuC3js9zGLK2C3EKSngGG3sI+aOC+KILQg2vFxg4HelwPEf6Z89rbK
 YCzYjrzQ62scCDq3g/XOUqNjeX+G2IgqFnfdYquqg2lfLPf8RE5foGXN8d+FqUgZ
 xlUwYMDiYechp0KNNVV14WYwG8qSp9WqoaBMqXuTRTEoKgcEUNrFt294UNsis3jQ
 ECqA6PZ+Cl+gPjetrso0oly5Axuj2K99FVkiOQlvgzInW8fkqmOllGatRIA4zBk=
 =UbSe
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
 "A couple of follow-up patches for -rc1 changes in rbd, support for a
  timeout on waiting for the acquisition of exclusive lock and a fix for
  uninitialized memory access in CephFS, marked for stable"

* tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-client:
  rbd: notrim map option
  rbd: adjust queue limits for "fancy" striping
  rbd: avoid Wreturn-type warnings
  ceph: always update atime/mtime/ctime for new inode
  rbd: support timeout in rbd_wait_state_locked()
  rbd: refactor rbd_wait_state_locked()
2018-04-18 12:48:17 -07:00
Mauro Carvalho Chehab
42a182282e media: si470x: fix a typo at the Makefile causing build issues
Instead of +=, the rule had :=, with actually disables build
of everything else.

Fixes: 58757984ca ("media: si470x: allow build both USB and I2C at the same time")
Reported-by: Daniel Scheller <d.scheller.oss@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-18 15:21:41 -04:00
Arnaldo Carvalho de Melo
eccb1b9363 perf test BPF: Fixup BPF test using epoll_pwait syscall function probe
Since e145242ea0 ("syscalls/core, syscalls/x86: Clean up syscall stub
naming convention") changed the main syscall function for 'epoll_pwait'
to something other than the expected 'SyS_epoll_pwait the' 'perf test
BPF' entries started failing, fix it by using something called from the
main syscall function instead, 'epoll_wait', which should keep this test
working in older kernels too.

Before:

  # perf test BPF
  40: BPF filter                           :
  40.1: Basic BPF filtering                : FAILED!
  40.2: BPF pinning                        : Skip
  40.3: BPF prologue generation            : Skip
  40.4: BPF relocation checker             : Skip

If we use -v for that test we see the problem:

    Probe point 'SyS_epoll_pwait' not found.

After:

  # perf test BPF
  40: BPF filter                           :
  40.1: Basic BPF filtering                : Ok
  40.2: BPF pinning                        : Ok
  40.3: BPF prologue generation            : Ok
  40.4: BPF relocation checker             : Ok
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/tip-y24nmn70cs2am8jh4i344dng@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:35:53 -03:00
Arnaldo Carvalho de Melo
518c6021e9 perf tests mmap: Show which tracepoint is failing
In the 'perf test "mmap interface"' we try creating events for several
tracepoints, but when perf_evsel__new() fails we're not showing which
one is failing, fix that to help diagnosing problems, such as the
syscall tracepoints ones being found and fixes in this merge window.

Now the failing tests shows:

  # perf test -v "mmap interface"
 4: Read samples using the mmap interface                 :
  --- start ---
  test child forked, pid 14311
  <SNIP>
  perf_evsel__new(sys_enter_getppid)
  test child finished with -1
  ---- end ----
  Read samples using the mmap interface: FAILED!
  #

Now to check why the syscalls:sys_enter_getppid is failing...

  # ls -la /sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid
  ls: cannot access '/sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid': No such file or directory
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-44xk0ycdzrfzx1o9rklf5itl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:35:52 -03:00
Ravi Bangoria
66f5a0779a perf tools: Add '\n' at the end of parse-options error messages
Few error messages does not have '\n' at the end and thus next prompt
gets printed in the same line. Ex,

  linux~$ perf buildid-cache -verbose --add ./a.out
   Error: did you mean `--verbose` (with two dashes ?)linux~$

Fix it.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Sihyeon Jang <uneedsihyeon@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180417041346.5617-2-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:35:51 -03:00
Andi Kleen
ccbb6afe08 perf record: Remove suggestion to enable APIC
'perf record' suggests to enable the APIC on errors.

APIC is practically always used today and the problem is usually
somewhere else.

Just remove the outdated suggestion.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180406203812.3087-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:35:50 -03:00
Andi Kleen
ec3948451e perf record: Remove misleading error suggestion
When perf record encounters an error setting up an event it suggests
to enable CONFIG_PERF_EVENTS. This is misleading because:

- Usually it is enabled (it is really hard to disable on x86)

- The problem is usually somewhere else, e.g. the CPU is not supported
or an invalid configuration has been used.

Remove the misleading suggestion.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180406203812.3087-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:35:49 -03:00
Andi Kleen
6a02f06ede perf hists browser: Clarify top/report browser help
Clarify in the browser help that ESC in tui mode may go back to the
previous screen instead of just exiting (was not clear to me)

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180406203812.3087-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:35:49 -03:00
Andi Kleen
a7e9eab3db perf mem: Allow all record/report options
For perf mem report / perf mem record, pass all unknown options
through to the underlying report/record commands. This makes things
like

perf mem record -a sleep 1

work. Matches how c2c and other tools work.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180406203812.3087-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:35:48 -03:00
Arnaldo Carvalho de Melo
4e5c01a7c7 perf trace: Support MAP_FIXED_NOREPLACE
Introduced in a4ff8e8620 ("mm: introduce MAP_FIXED_NOREPLACE"), and
now that we have that define in the just syncronized
tools/arch/*/include/uapi/asm/mman.h files, add support for it.

This should really transition to autogeneration of string tables as
done for various other things:

  $ ls /tmp/build/perf/trace/beauty/generated/*.c
  arch_errno_name_array.c kcmp_type_array.c madvise_behavior_array.c
  pkey_alloc_access_rights_array.c prctl_option_array.c
  $ head /tmp/build/perf/trace/beauty/generated/madvise_behavior_array.c
  static const char *madvise_advices[] = {
	[0] = "NORMAL",
	[1] = "RANDOM",
	[2] = "SEQUENTIAL",
	[3] = "WILLNEED",
	[4] = "DONTNEED",
	[8] = "FREE",
	[9] = "REMOVE",
	[10] = "DONTFORK",
	[11] = "DOFORK",
  $

Till then, add support for this the old way.

Also it has to be ifdef'ed, because arches like mips still don't define
it. The proper solution will be to have per-arch tables for these
values to support cross-analysis.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-td9t5vhjltqnlzaurkkgq8cn@git.kernel.org
Signef-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:34:52 -03:00
Srinath Mannam
4555a5021f arm64: dts: correct SATA addresses for Stingray
Correct all SATA ahci and phy controller register
addresses and interrupt lines to proper values.

Fixes: 344a2e5141 ("arm64: dts: Add SATA DT nodes for Stingray SoC")

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Andrew Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-04-18 11:31:16 -07:00
Bjørn Mork
81c895072d tun: fix vlan packet truncation
Bogus trimming in tun_net_xmit() causes truncated vlan packets.

skb->len is correct whether or not skb_vlan_tag_present() is true. There
is no more reason to adjust the skb length on xmit in this driver than
any other driver. tun_put_user() adds 4 bytes to the total for tagged
packets because it transmits the tag inline to userspace.  This is
similar to a nic transmitting the tag inline on the wire.

Reproducing the bug by sending any tagged packet through back-to-back
connected tap interfaces:

 socat TUN,tun-type=tap,iff-up,tun-name=in TUN,tun-type=tap,iff-up,tun-name=out &
 ip link add link in name in.20 type vlan id 20
 ip addr add 10.9.9.9/24 dev in.20
 ip link set in.20 up
 tshark -nxxi in -f arp -c1 2>/dev/null &
 tshark -nxxi out -f arp -c1 2>/dev/null &
 ping -c 1 10.9.9.5 >/dev/null 2>&1

The output from the 'in' and 'out' interfaces are different when the
bug is present:

 Capturing on 'in'
 0000  ff ff ff ff ff ff 76 cf 76 37 d5 0a 81 00 00 14   ......v.v7......
 0010  08 06 00 01 08 00 06 04 00 01 76 cf 76 37 d5 0a   ..........v.v7..
 0020  0a 09 09 09 00 00 00 00 00 00 0a 09 09 05         ..............

 Capturing on 'out'
 0000  ff ff ff ff ff ff 76 cf 76 37 d5 0a 81 00 00 14   ......v.v7......
 0010  08 06 00 01 08 00 06 04 00 01 76 cf 76 37 d5 0a   ..........v.v7..
 0020  0a 09 09 09 00 00 00 00 00 00                     ..........

Fixes: aff3d70a07 ("tun: allow to attach ebpf socket filter")
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18 13:50:29 -04:00
Tung Nguyen
36a50a989e tipc: fix infinite loop when dumping link monitor summary
When configuring the number of used bearers to MAX_BEARER and issuing
command "tipc link monitor summary", the command enters infinite loop
in user space.

This issue happens because function tipc_nl_node_dump_monitor() returns
the wrong 'prev_bearer' value when all potential monitors have been
scanned.

The correct behavior is to always try to scan all monitors until either
the netlink message is full, in which case we return the bearer identity
of the affected monitor, or we continue through the whole bearer array
until we can return MAX_BEARERS. This solution also caters for the case
where there may be gaps in the bearer array.

Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18 13:48:43 -04:00
Jon Maloy
be47e41d77 tipc: fix use-after-free in tipc_nametbl_stop
When we delete a service item in tipc_nametbl_stop() we loop over
all service ranges in the service's RB tree, and for each service
range we loop over its pertaining publications while calling
tipc_service_remove_publ() for each of them.

However, tipc_service_remove_publ() has the side effect that it also
removes the comprising service range item when there are no publications
left. This leads to a "use-after-free" access when the inner loop
continues to the next iteration, since the range item holding the list
we are looping no longer exists.

We fix this by moving the delete of the service range item outside
the said function. Instead, we now let the two functions calling it
test if the list is empty and perform the removal when that is the
case.

Reported-by: syzbot+d64b64afc55660106556@syzkaller.appspotmail.com
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18 13:48:43 -04:00
Martin Blumenstingl
4b7b0d7b25 ARM64: dts: meson-gxm-khadas-vim2: enable the USB controller
The Khadas VIM2 board connects the dwc3 controller to an internal 4-port
USB hub which. Two of these ports are accessible directly soldered to
the board, while the other two are accessible through the 40-pin "GPIO"
header.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-04-18 10:24:34 -07:00
Martin Blumenstingl
55ef32249b ARM64: dts: meson-gxl-nexbox-a95x: enable the USB controller
The Nexbox A95X provides two USB ports. Enable the SoC's USB controller
on this board to make these USB ports usable.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-04-18 10:24:34 -07:00
Martin Blumenstingl
b83687f359 ARM64: dts: meson-gxl-s905x-libretech-cc: enable the USB controller
The LibreTech CC ("Le Potato") board provides four USB connectors.
These are provided by a hub which is connected to the SoC's USB
controller.
Enable the SoC's USB controller to make the USB ports usable. Also turn
on the HDMI_5V regulator when powering on the PHY because (even though
it's not shown in the schematics) HDMI_5V also supplies the USB VBUS.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-04-18 10:24:34 -07:00
Martin Blumenstingl
972cd12a02 ARM64: dts: meson-gx-p23x-q20x: enable the USB controller
All S905D (GXL) and S912 (GXM) reference boards (namely these are
P230, P231, Q200 and Q201) provide USB connectors.
This enables the USB controller on these boards to make the USB ports
actually usable.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-04-18 10:24:34 -07:00
Martin Blumenstingl
b9f07cb4f4 ARM64: dts: meson-gxl-s905x-p212: enable the USB controller
All boards based on the P212 reference design (the P212 reference board
itself and the Khadas VIM) have USB connectors (in case of the Khadas
VIM the first port is exposed through the USB Type-C connector, the
second port is connected to a 4-port USB hub).
This enables the USB controller on these boards to make the USB ports
actually usable.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-04-18 10:24:34 -07:00
Martin Blumenstingl
458baa95c8 ARM64: dts: meson-gxm: add GXM specific USB host configuration
The USB configuration on GXM is slightly different than on GXL. The dwc3
controller's internal hub has three USB2 ports (instead of 2 on GXL)
along with a dedicated USB2 PHY for this port. However, it seems that
there are no pins on GXM which would allow connecting the third port to
a physical USB port.
Passing the third PHY is required though, because without it none of the
other USB ports is working (this seems to be a limitation of how the
internal USB hub works, if one PHY is disabled then no USB port works).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-04-18 10:24:34 -07:00
Martin Blumenstingl
8aec5fc1d4 ARM64: dts: meson-gxl: add USB host support
This adds USB host support to the Meson GXL SoC. A dwc3 controller is
used for host-mode, while a dwc2 controller (not added in this patch
because I could not get it working) is used for device-mode only.

The dwc3 controller's internal roothub has two USB2 ports enabled but no
USB3 port. Each of the ports is supplied by a separate PHY. The USB pins
are connected to the SoC's USBHOST_A and USBOTG_B pins.
Due to the way the roothub works internally the USB PHYs are left
enabled. When the dwc3 controller is disabled the PHY is never powered on
so it does not draw any extra power. However, when the dwc3 host
controller is enabled then all PHYs also have to be enabled, otherwise
USB devices will not be detected (regardless of whether they are plugged
into an enabled port or not). This means that only the dwc3 controller
has to be enabled on boards with USB support (instead of requiring all
boards to enable the PHYs additionally with the chance of forgetting to
enable one and breaking all other ports with that as well).

This also adds the USB3 PHY which currently only does some basic
initialization. That however is required because without it high-speed
devices (like USB thumb drives) do not work on some devices (probably
because the bootloader does not configure the USB3 PHY registers).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-04-18 10:24:34 -07:00
Dave Gerlach
5692fceebe ARM: OMAP2+: Fix build when using split object directories
The sleep33xx and sleep43xx files should not depend on a header file
generated in drivers/memory. Remove this dependency and instead allow
both drivers/memory and arch/arm/mach-omap2 to generate all macros
needed in headers local to their own paths.

This fixes an issue where the build fail will when using O= to set a
split object directory and arch/arm/mach-omap2 is built before
drivers/memory with the following error:

.../drivers/memory/emif-asm-offsets.c:1:0: fatal error: can't open
drivers/memory/emif-asm-offsets.s for writing: No such file or directory
compilation terminated.

Fixes: 41d9d44d72 ("ARM: OMAP2+: pm33xx-core: Add platform code needed for PM")
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-04-18 10:07:13 -07:00
Theodore Ts'o
b2569260d5 ext4: set h_journal if there is a failure starting a reserved handle
If ext4 tries to start a reserved handle via
jbd2_journal_start_reserved(), and the journal has been aborted, this
can result in a NULL pointer dereference.  This is because the fields
h_journal and h_transaction in the handle structure share the same
memory, via a union, so jbd2_journal_start_reserved() will clear
h_journal before calling start_this_handle().  If this function fails
due to an aborted handle, h_journal will still be NULL, and the call
to jbd2_journal_free_reserved() will pass a NULL journal to
sub_reserve_credits().

This can be reproduced by running "kvm-xfstests -c dioread_nolock
generic/475".

Cc: stable@kernel.org # 3.11
Fixes: 8f7d89f368 ("jbd2: transaction reservation support")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
2018-04-18 11:49:31 -04:00
Paweł Chmiel
938a10bb49 pinctrl: samsung: Document required order of banks
This patch documents requirement coming from the way
exynos_eint_gpio_irq() is working now, which expects EINTG banks to be
at the beginning of the bank arrays.

Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-18 17:48:39 +02:00
Paweł Chmiel
5cf9a338db pinctrl: samsung: Correct EINTG banks order
All banks with GPIO interrupts should be at beginning of bank array and
without any other types of banks between them.  This order is expected
by exynos_eint_gpio_irq, when doing interrupt group to bank translation.
Otherwise, kernel NULL pointer dereference would happen when trying to
handle interrupt, due to wrong bank being looked up.  Observed on
s5pv210, when trying to handle gpj0 interrupt, where kernel was mapping
it to gpi bank.

Cc: stable@vger.kernel.org
Fixes: 023e06dfa6 ("pinctrl: exynos: add exynos5410 SoC specific data")
Fixes: 608a26a7bc ("pinctrl: Add s5pv210 support to pinctrl-exynos)
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-18 17:45:08 +02:00
Haiyue Wang
6b2e54f7ba ipmi: add an NPCM7xx KCS BMC driver
This driver exposes the Keyboard Controller Style (KCS) interface on
Novoton NPCM7xx SoCs as a character device. Such SOCs are commonly used
as a BaseBoard Management Controller (BMC) on a server board, and KCS
interface is commonly used to perform the in-band IPMI communication
between the server and its BMC.

Signed-off-by: Avi Fishman <avifishman70@gmail.com>
Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:23:12 -05:00
Corey Minyard
93c303d204 ipmi_si: Clean up shutdown a bit
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:23:11 -05:00
Corey Minyard
57bccb4e87 ipmi_si: Rename intf_num to si_num
There is already an intf_num in the main IPMI device structure, use
a different name in the ipmi_si code to avoid confusion.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:23:10 -05:00
Corey Minyard
0fbecb4f47 ipmi: Remove smi->intf checks
Due to changes in the way shutdown is done, it is no longer
required to check that the interface is set.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:23:08 -05:00
Corey Minyard
ebb339a597 ipmi_ssif: Get rid of unused intf_num
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:23:07 -05:00
Corey Minyard
5ce1a7dc80 ipmi: Get rid of ipmi_user_t and ipmi_smi_t in include files
Convert over to struct ipmi_user * and struct ipmi_smi *.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:23:06 -05:00
Corey Minyard
6a0d23ed33 ipmi: ipmi_unregister_smi() cannot fail, have it return void
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:23:05 -05:00
Corey Minyard
e56710d26e ipmi_devintf: Add an error return on invalid ioctls
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:23:04 -05:00
Corey Minyard
8eb005bf6e ipmi: Remove usecount function from interfaces
All the users are now gone.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:23:03 -05:00