When changing rdmsr_safe_on_cpu() to schedule, it was missed that
__rdmsr_safe_on_cpu() was also used by rdmsrl_safe_on_cpu()
Make rdmsrl_safe_on_cpu() a wrapper instead of copy/pasting the code which
was added for the completion handling.
Fixes: 07cde313b2 ("x86/msr: Allow rdmsr_safe_on_cpu() to schedule")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180328032233.153055-1-edumazet@google.com
GVT-g dispatches request to host i915 and depends on i915 notify
ring interrupt mechanism to check completion of request.
For now MI_USER_INTERRUPT in guest requests is passed through
in GVT-g cmd parser and i915 does not use it, which causes
unnecessary interrupt handling in i915.
On the other hand, if several requests from guest are combined into
one request in and contain MI_USER_INTERRUPT in the middle of
combined request. GVT-g still has to wait on the whole request to
complete to inject user interrupts to guest.
This patch makes all the MI_USER_INTERRUPT nop to save some interrupt
handling.
Here is test result to run glmark2 on guest for 10 seconds:
host master interrupts number is reduced from 16021 to 11162
host user interrupts number is reduced from 7936 to 3536
v2:
- revise commit message. (Kevin)
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1466154 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Planes with identical zpos value will result undefined behavior:
disappearing planes, screen flickering and it is not supported by the
hardware.
Use normalized zpos to make sure that we don't encounter invalid
configuration.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-7-peter.ujfalusi@ti.com
Set the drm_mode_config->normalize_zpos and call drm_atomic_helper_check()
from rcar_du_atomic_check() instead of re implementing the function locally.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-6-peter.ujfalusi@ti.com
Instead of re-implementing the drm_atomic_helper_check() locally with just
adding drm_atomic_normalize_zpos() into it, set the
drm_mode_config->normalize_zpos.
Note: the drm_atomic_helper_check() now includes
if (state->legacy_cursor_update)
state->async_update = !drm_atomic_helper_async_check(drm, state);
which was added after the driver moved away from using it
(38d868e41c drm: Don't force all planes to
be added to the state due to zpos)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Benjamin Gaignard <benjamin.gaignard@linaro.org>
CC: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-5-peter.ujfalusi@ti.com
Set the drm_mode_config->normalize_zpos and call the generic
drm_atomic_helper_check() instead of duplicating it within
tegra_atomic_check().
Call tegra_display_hub_atomic_check() after the drm_atomic_helpre_check()
returned without error.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-4-peter.ujfalusi@ti.com
Instead of re-implementing the drm_atomic_helper_check() locally with just
adding drm_atomic_normalize_zpos() into it, set the
drm_mode_config->normalize_zpos.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Inki Dae <inki.dae@samsung.com>
CC: Joonyoung Shim <jy0922.shim@samsung.com>
CC: Seung-Woo Kim <sw0312.kim@samsung.com>
CC: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-3-peter.ujfalusi@ti.com
Instead of drivers duplicating the drm_atomic_helper_check() code to be
able to normalize the zpos they can use the normalize_zpos flag to let the
drm core to do it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-2-peter.ujfalusi@ti.com
The code in sie64a uses the stack frame passed to the function to store
some temporary data in the empty1 array (see struct stack_frame in
asm/processor.h.
Replace the __SF_EMPTY+x constants with a properly defined offset:
s/__SF_EMPTY/__SF_SIE_CONTROL/, s/__SF_EMPTY+8/__SF_SIE_SAVEAREA/,
s/__SF_EMPTY+16/__SF_SIE_REASON/, s/__SF_EMPTY+24/__SF_SIE_FLAGS/.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With the new macros for CPU alternatives the MACHINE_FLAG_LPP check
around the LPP instruction can be optimized. After this is done the
flag can be removed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Replace the open coded alternatives for the BPOFF, BPON, BPENTER,
and BPEXIT macros with the new magic from asm/alternatives-asm.h
to make the code easier to read.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add a header with macros usable in assembler files to emit alternative
code sequences. It works analog to the alternatives for inline assmeblies
in C files, with the same restrictions and capabilities.
The syntax is
ALTERNATIVE "<default instructions sequence>", \
"<alternative instructions sequence>", \
"<features-bit>"
and
ALTERNATIVE_2 "<default instructions sequence>", \
"<alternative instructions sqeuence #1>", \
"<feature-bit #1>",
"<alternative instructions sqeuence #2>", \
"<feature-bit #2>"
Reviewed-by: Vasily Gorbik <gor@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Set CONFIG_GENERIC_CPU_VULNERABILITIES and provide the two functions
cpu_show_spectre_v1 and cpu_show_spectre_v2 to report the spectre
mitigations.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add a boot message if either of the spectre defenses is active.
The message is
"Spectre V2 mitigation: execute trampolines."
or "Spectre V2 mitigation: limited branch prediction."
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Automatically decide between nobp vs. expolines if the spectre_v2=auto
kernel parameter is specified or CONFIG_EXPOLINE_AUTO=y is set.
The decision made at boot time due to CONFIG_EXPOLINE_AUTO=y being set
can be overruled with the nobp, nospec and spectre_v2 kernel parameters.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Keep the code for the nobp parameter handling with the code for
expolines. Both are related to the spectre v2 mitigation.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Export utility strings as a chpid's binary sysfs attribute.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
It seems there is a classical off-by-one typo from the beginning
when commit
ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
introduced a new helper.
Fix a typo by introducing a macro constant.
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180319141932.37290-1-andriy.shevchenko@linux.intel.com
And use it in a few more places rather than opencoding the values.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I_DIRTY_DATASYNC is a strict superset of I_DIRTY_SYNC semantics, as
in mark dirty to be written out by fdatasync as well. So dirtying
for both flags makes no sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I_DIRTY_DATASYNC is a strict superset of I_DIRTY_SYNC semantics, as
in mark dirty to be written out by fdatasync as well. So dirtying
for both flags makes no sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I_DIRTY_DATASYNC is a strict superset of I_DIRTY_SYNC semantics, as
in mark dirty to be written out by fdatasync as well. So dirtying
for both flags makes no sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
do_dentry_open is where we do the actual open of the file, so this is
where we should do our O_DIRECT sanity check to cover all potential
callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It is possible that incoming data arrives before the client driver has
reached a point in the probe method where adequate context for handling
the incoming message has been established.
In the event that the client's callback function returns an error the
message will be left on the FIFO and by invoking the receive handler
after the device has been probed the message will be picked off the FIFO
and the callback invoked again.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
For special rpmsg devices without a primary endpoint there is nothing to
announce so don't call the backend announce create function if we didn't
create an endpoint.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The container_of macros should not use the same name for the parameter
as the member to use for lookup, as this will result in a compilation
error unless the passed parameter has the same name as the member.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
- GPUVM support for dGPUs
- KFD events support for dGPUs
- Fix live-lock situation when restoring multiple evicted processes
- Fix VM page table allocation on large-bar systems
- Fix for build failure on frv architecture
* tag 'drm-amdkfd-next-2018-03-27' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Use ordered workqueue to restore processes
drm/amdgpu: Fix acquiring VM on large-BAR systems
drm/amdkfd: Add module option for testing large-BAR functionality
drm/amdkfd: Kmap event page for dGPUs
drm/amdkfd: Add ioctls for GPUVM memory management
drm/amdkfd: Add TC flush on VMID deallocation for Hawaii
drm/amdkfd: Allocate CWSR trap handler memory for dGPUs
drm/amdkfd: Add per-process IDR for buffer handles
drm/amdkfd: Aperture setup for dGPUs
drm/amdkfd: Remove limit on number of GPUs
drm/amdkfd: Populate DRM render device minor
drm/amdkfd: Create KFD VMs on demand
drm/amdgpu: Add kfd2kgd interface to acquire an existing VM
drm/amdgpu: Add helper to turn an existing VM into a compute VM
drm/amdgpu: Fix initial validation of PD BO for KFD VMs
drm/amdgpu: Move KFD-specific fields into struct amdgpu_vm
drm/amdkfd: fix uninitialized variable use
drm/amdkfd: add missing include of mm.h
- Display fixes for booting with MST hub lid closed and display
freezing after hibernation (fd.o bugs 105470 & 105196)
- Fix for a very rare interrupt handling race resulting in GPU hang
* tag 'drm-intel-next-fixes-2018-03-27' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Fix hibernation with ACPI S0 target state
drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt
drm/i915: Specify which engines to reset following semaphore/event lockups
drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauCZfAAoJEHm+PkMAQRiGWGUH/2rhdQDkoJpYWnjaQkolECG8
MxpGE7nmIIHxQcbSDdHTGJ8IhVm6Z5wZ7ym/PwCDTT043Y1y341sJrIwL2/nTG6d
HVidk8hFvgN6QzlzVAHT3ZZMII/V9Zt+VV5SUYLGnPAVuJNHo/6uzWlTU5g+NTFo
IquFDdQUaGBlkKqby+NoAFnkV1UAIkW0g22cfvPnlO5GMer0gusGyVNvVp7TNj3C
sqj4Hvt3RMDLMNe9RZ2pFTiOD096n8FWpYftZneUTxFImhRV3Jg5MaaYZm9SI3HW
tXrv/LChT/F1mi5Pkx6tkT5Hr8WvcrwDMJ4It1kom10RqWAgjxIR3CMm448ileY=
=YKUG
-----END PGP SIGNATURE-----
Backmerge tag 'v4.16-rc7' into drm-next
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
The PCI interrupt vectors intended to be associated with a queue may
not start at 0; a driver may allocate pre_vectors for special use. This
patch adds an offset parameter so blk-mq may find the intended affinity
mask and updates all drivers using this API accordingly.
Cc: Don Brace <don.brace@microsemi.com>
Cc: <qla2xxx-upstream@qlogic.com>
Cc: <linux-scsi@vger.kernel.org>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch add a segment type check in IPU, in
case of something wrong with blkadd in dnode.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since f2fs_inode_info is allocated with flag GFP_F2FS_ZERO, so we do not
need to initialize zero value for its member any more.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Nat entry set is used only in checkpoint(), and during checkpoint() we
won't flush new nat entry with unallocated address, so we don't need to
add new nat entry into nat set, then nat_entry_set::entry_cnt can
indicate actual entry count we need to flush in checkpoint().
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use enum dma_transfer_direction as required by the functions
dmaengine_prep_slave_(sg|single)() instead of enum dma_data_direction.
This won't change behavior in practice as the enum values are
equivalent.
This fixes two warnings when building with clang:
drivers/spi/spi-atmel.c:771:12: warning: implicit conversion from enumeration
type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction'
[-Wenum-conversion]
DMA_FROM_DEVICE,
^~~~~~~~~~~~~~~
...
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>