Commit b0e214d212 ("netfilter: keep conntrack reference until
IPsecv6 policy checks are done") is a direct copy of the old
commit b59c270104 ("[NETFILTER]: Keep conntrack reference until
IPsec policy checks are done") but for IPv6. However, it also
copies a bug that this old commit had. That is: when the third
packet of 3WHS connection establishment contains payload, it is
added into socket receive queue without the XFRM check and the
drop of connection tracking context.
That leads to nf_conntrack module being impossible to unload as
it waits for all the conntrack references to be dropped while
the packet release is deferred in per-cpu cache indefinitely, if
not consumed by the application.
The issue for IPv4 was fixed in commit 6f0012e351 ("tcp: add a
missing nf_reset_ct() in 3WHS handling") by adding a missing XFRM
check and correctly dropping the conntrack context. However, the
issue was introduced to IPv6 code afterwards. Fixing it the
same way for IPv6 now.
Fixes: b0e214d212 ("netfilter: keep conntrack reference until IPsecv6 policy checks are done")
Link: https://lore.kernel.org/netdev/d589a999-d4dd-2768-b2d5-89dec64a4a42@ovn.org/
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230922210530.2045146-1-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After deleting an interface address in fib_del_ifaddr(), the function
scans the fib_info list for stray entries and calls fib_flush() and
fib_table_flush(). Then the stray entries will be deleted silently and no
RTM_DELROUTE notification will be sent.
This lack of notification can make routing daemons, or monitor like
`ip monitor route` miss the routing changes. e.g.
+ ip link add dummy1 type dummy
+ ip link add dummy2 type dummy
+ ip link set dummy1 up
+ ip link set dummy2 up
+ ip addr add 192.168.5.5/24 dev dummy1
+ ip route add 7.7.7.0/24 dev dummy2 src 192.168.5.5
+ ip -4 route
7.7.7.0/24 dev dummy2 scope link src 192.168.5.5
192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
+ ip monitor route
+ ip addr del 192.168.5.5/24 dev dummy1
Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5
Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5
As Ido reminded, fib_table_flush() isn't only called when an address is
deleted, but also when an interface is deleted or put down. The lack of
notification in these cases is deliberate. And commit 7c6bb7d2fa
("net/ipv6: Add knob to skip DELROUTE message on device down") introduced
a sysctl to make IPv6 behave like IPv4 in this regard. So we can't send
the route delete notify blindly in fib_table_flush().
To fix this issue, let's add a new flag in "struct fib_info" to track the
deleted prefer source address routes, and only send notify for them.
After update:
+ ip monitor route
+ ip addr del 192.168.5.5/24 dev dummy1
Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5
Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5
Deleted 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5
Suggested-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230922075508.848925-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A wrong return value from ovl_check_encode_origin() would cause
ovl_dentry_to_fid() to try to encode fid from NULL upper dentry.
Reported-by: syzbot+2208f82282740c1c8915@syzkaller.appspotmail.com
Fixes: 16aac5ad1f ("ovl: support encoding non-decodable file handles")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Including:
- Arm SMMU fixes from Will Deacon:
- Fix TLB range command encoding when TTL, Num and Scale are all zero
- Fix soft lockup by limiting TLB invalidation ops issued by SVA
- Fix clocks description for SDM630 platform in arm-smmu DT binding
- Intel VT-d fix from Lu Baolu:
- Fix a suspend/hibernation problem in iommu_suspend()
- Mediatek driver: Fix page table sharing for addresses over 4GiB
- Apple/Dart: DMA_FQ handling fix in attach_dev()
-----BEGIN PGP SIGNATURE-----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=NT6P
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Arm SMMU fixes from Will Deacon:
- Fix TLB range command encoding when TTL, Num and Scale are all zero
- Fix soft lockup by limiting TLB invalidation ops issued by SVA
- Fix clocks description for SDM630 platform in arm-smmu DT binding
- Intel VT-d fix from Lu Baolu:
- Fix a suspend/hibernation problem in iommu_suspend()
- Mediatek driver: Fix page table sharing for addresses over 4GiB
- Apple/Dart: DMA_FQ handling fix in attach_dev()
* tag 'iommu-fixes-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Avoid memory allocation in iommu_suspend()
iommu/apple-dart: Handle DMA_FQ domains in attach_dev()
iommu/mediatek: Fix share pgtable for iova over 4GB
iommu/arm-smmu-v3: Fix soft lockup triggered by arm_smmu_mm_invalidate_range
dt-bindings: arm-smmu: Fix SDM630 clocks description
iommu/arm-smmu-v3: Avoid constructing invalid range commands
Like the Lenovo 82TL, 82V2, 82QF and 82UG, the 82YM (Yoga 7 14ARP8)
requires an entry in the quirk list to enable the internal microphone.
The latter two received similar fixes in commit 1263cc0f41
("ASoC: amd: yc: Fix non-functional mic on Lenovo 82QF and 82UG").
Fixes: c008323fe3 ("ASoC: amd: yc: Fix a non-functional mic on Lenovo 82SJ")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Frotscher <sven.frotscher@gmail.com>
Link: https://lore.kernel.org/r/20230927223758.18870-1-sven.frotscher@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The micbias setting for tlv320adc can also have the value '3' which
means that the micbias ouput pin is connected to the input pin AVDD.
Signed-off-by: Antoine Gennart <gennartan@disroot.org>
Link: https://lore.kernel.org/r/20230929130117.77661-1-gennartan@disroot.org
Signed-off-by: Mark Brown <broonie@kernel.org>
fsl,imx6-hdmi.yaml makes a reference to synopsys,dw-hdmi.yaml.
The 'interrupts' and 'reg' properties are described in synopsys,dw-hdmi.yaml,
so use 'unevaluatedProperties: false' so that these two properties can
be accepted.
This fixes the following schema warnings:
hdmi@120000: 'interrupts', 'reg' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/imx/fsl,imx6-hdmi.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230930130102.798822-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
ovl_permission() accesses ->layers[...].mnt; we can't have ->layers
freed without an RCU delay on fs shutdown.
Fortunately, kern_unmount_array() that is used to drop those mounts
does include an RCU delay, so freeing is delayed; unfortunately, the
array passed to kern_unmount_array() is formed by mangling ->layers
contents and that happens without any delays.
The ->layers[...].name string entries are used to store the strings to
display in "lowerdir=..." by ovl_show_options(). Those entries are not
accessed in RCU walk.
Move the name strings into a separate array ofs->config.lowerdirs and
reuse the ofs->config.lowerdirs array as the temporary mount array to
pass to kern_unmount_array().
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20231002023711.GP3389589@ZenIV/
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
d_inode_rcu() is right - we might be in rcu pathwalk;
however, OVL_E() hides plain d_inode() on the same dentry...
Fixes: a6ff2bc0be ("ovl: use OVL_E() and OVL_E_FLAGS() accessors")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
... into ->free_inode(), that is.
Fixes: 0af950f57f "ovl: move ovl_entry into ovl_inode"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
xhci_add_interrupter() erroneously preserves only the lowest 4 bits when
writing the ERSTBA register, not the lowest 6 bits. Fix it.
Migrate the ERST_BASE_RSVDP macro to the modern GENMASK_ULL() syntax to
avoid a u64 cast.
This was previously fixed by commit 8c1cbec9db ("xhci: fix event ring
segment table related masks and variables in header"), but immediately
undone by commit b17a57f89f ("xhci: Refactor interrupter code for
initial multi interrupter support.").
Fixes: b17a57f89f ("xhci: Refactor interrupter code for initial multi interrupter support.")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.3+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230915143108.1532163-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Event Handler Busy bit shall be cleared by software when the Event
Ring is empty. The xHC is thereby informed that it may raise another
interrupt once it has enqueued new events (sec 4.17.2).
However since commit dc0ffbea57 ("usb: host: xhci: update event ring
dequeue pointer on purpose"), the EHB bit is already cleared after half
a segment has been processed.
As a result, spurious interrupts may occur:
- xhci_irq() processes half a segment, clears EHB, continues processing
remaining events.
- xHC enqueues new events. Because EHB has been cleared, xHC sets
Interrupt Pending bit. Interrupt moderation countdown begins.
- Meanwhile xhci_irq() continues processing events. Interrupt
moderation countdown reaches zero, so an MSI interrupt is signaled.
- xhci_irq() empties the Event Ring, clears EHB again and is done.
- Because an MSI interrupt has been signaled, xhci_irq() is run again.
It discovers there's nothing to do and returns IRQ_NONE.
Avoid by clearing the EHB bit only at the end of xhci_irq().
Fixes: dc0ffbea57 ("usb: host: xhci: update event ring dequeue pointer on purpose")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v5.5+
Cc: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230915143108.1532163-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci-hub.c tracks suspended ports in a suspended_port bitfield.
This is checked when responding to a Get_Status(PORT) request to see if a
port in running U0 state was recently resumed, and adds the required
USB_PORT_STAT_C_SUSPEND change bit in those cases.
The suspended_port bit was left uncleared if a device is disconnected
during suspend. The bit remained set even when a new device was connected
and enumerated. The set bit resulted in a incorrect Get_Status(PORT)
response with a bogus USB_PORT_STAT_C_SUSPEND change
bit set once the new device reached U0 link state.
USB_PORT_STAT_C_SUSPEND change bit is only used for USB2 ports, but
xhci-hub keeps track of both USB2 and USB3 suspended ports.
Cc: stable@vger.kernel.org
Reported-by: Wesley Cheng <quic_wcheng@quicinc.com>
Closes: https://lore.kernel.org/linux-usb/d68aa806-b26a-0e43-42fb-b8067325e967@quicinc.com/
Fixes: 1d5810b692 ("xhci: Rework port suspend structures for limited ports.")
Tested-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230915143108.1532163-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As mentioned in:
commit 474ed23a62 ("xhci: align the last trb before link if it is
easily splittable.")
A bounce buffer is utilized for ensuring that transfers that span across
ring segments are aligned to the EP's max packet size. However, the device
that is used to map the DMA buffer to is currently using the XHCI HCD,
which does not carry any DMA operations in certain configrations.
Migration to using the sysdev entry was introduced for DWC3 based
implementations where the IOMMU operations are present.
Replace the reference to the controller device to sysdev instead. This
allows the bounce buffer to be properly mapped to any implementations that
have an IOMMU involved.
cc: stable@vger.kernel.org
Fixes: 4c39d4b949 ("usb: xhci: use bus->sysdev for DMA configuration")
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230915143108.1532163-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently if ucsi_send_command() fails, then we bail out without
clearing EVENT_PENDING flag. So when the next connector change
event comes, ucsi_connector_change() won't queue the con->work,
because of which none of the new events will be processed.
Fix this by clearing EVENT_PENDING flag if ucsi_send_command()
fails.
Cc: stable@vger.kernel.org # 5.16
Fixes: 512df95b94 ("usb: typec: ucsi: Better fix for missing unplug events issue")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/1694423055-8440-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB2412 is a 2-Port USB 2.0 hub controller that provides a reset pin
and a single 3v3 powre source, which makes it suitable to be controlled
by the onboard_hub driver.
This hub has the same reset timings as USB2514/2517 and the same
onboard hub specific-data can be reused for USB2412.
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Cc: stable <stable@kernel.org>
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230911-topic-2412_onboard_hub-v1-1-7704181ddfff@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will attempt to disable the regulators if the initial enable fails
which is a bug.
Fix this bug by modifying the code to the correct sequence.
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_4F37C9B5315B7960041E8E0ADDA869128F08@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 4e08713336 ("ASoC: hdmi-codec: fix channel info for
compressed formats") accidentally changed hcp->chmap_idx from
ca_id, the CEA channel allocation ID, to idx, the index to
the table of channel mappings ordered by preference.
This resulted in wrong channel maps being reported to userspace,
eg for 5.1 "FL,FR,LFE,FC" was reported instead of the expected
"FL,FR,LFE,FC,RL,RR":
~ # speaker-test -c 6 -t sine
...
0 - Front Left
3 - Front Center
1 - Front Right
2 - LFE
4 - Unknown
5 - Unknown
~ # amixer cget iface=PCM,name='Playback Channel Map' | grep ': values'
: values=3,4,8,7,0,0,0,0
Switch this back to ca_id in case of PCM audio so the correct channel
map is reported again and set it to HDMI_CODEC_CHMAP_IDX_UNKNOWN in
case of non-PCM audio so the PCM channel map control returns "Unknown"
channels (value 0).
Fixes: 4e08713336 ("ASoC: hdmi-codec: fix channel info for compressed formats")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20230929195027.97136-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In snp_accept_memory(), the npages variables value is calculated from
phys_addr_t variables but is an unsigned int. A very large range passed
into snp_accept_memory() could lead to truncating npages to zero. This
doesn't happen at the moment but let's be prepared.
Fixes: 6c32117963 ("x86/sev: Add SNP-specific unaccepted memory support")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/6d511c25576494f682063c9fb6c705b526a3757e.1687441505.git.thomas.lendacky@amd.com
SNP retrieves the majority of CPUID information from the SNP CPUID page.
But there are times when that information needs to be supplemented by the
hypervisor, for example, obtaining the initial APIC ID of the vCPU from
leaf 1.
The current implementation uses the MSR protocol to retrieve the data from
the hypervisor, even when a GHCB exists. The problem arises when an NMI
arrives on return from the VMGEXIT. The NMI will be immediately serviced
and may generate a #VC requiring communication with the hypervisor.
Since a GHCB exists in this case, it will be used. As part of using the
GHCB, the #VC handler will write the GHCB physical address into the GHCB
MSR and the #VC will be handled.
When the NMI completes, processing resumes at the site of the VMGEXIT
which is expecting to read the GHCB MSR and find a CPUID MSR protocol
response. Since the NMI handling overwrote the GHCB MSR response, the
guest will see an invalid reply from the hypervisor and self-terminate.
Fix this problem by using the GHCB when it is available. Any NMI
received is properly handled because the GHCB contents are copied into
a backup page and restored on NMI exit, thus preserving the active GHCB
request or result.
[ bp: Touchups. ]
Fixes: ee0bfa08a3 ("x86/compressed/64: Add support for SEV-SNP CPUID table in #VC handlers")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/a5856fa1ebe3879de91a8f6298b6bbd901c61881.1690578565.git.thomas.lendacky@amd.com
The return type of cdns_set_active () is inconsistent
depending on whether CONFIG_PM_SLEEP is enabled, so the
return value is modified to void type.
Reported-by: Pavel Machek <pavel@denx.de>
Closes: https://lore.kernel.org/all/ZP7lIKUzD68XA91j@duo.ucw.cz/
Fixes: 2319b9c87f ("usb: cdns3: Put the cdns set active part outside the spin lock")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230926075333.1791011-1-xiaolei.wang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When there's phy initialization, we need to initiate a soft-reset
sequence. That's done through USBCMD.HCRST in the xHCI driver and its
initialization, However, the dwc3 driver may modify core configs before
the soft-reset. This may result in some connection instability. So,
ensure the phy is ready before the controller updates the GCTL.PRTCAPDIR
or other settings by issuing phy soft-reset.
Note that some host-mode configurations may not expose device registers
to initiate the controller soft-reset (via DCTL.CoreSftRst). So we reset
through GUSB3PIPECTL and GUSB2PHYCFG instead.
Cc: stable@vger.kernel.org
Fixes: e835c0a4e2 ("usb: dwc3: don't reset device side if dwc3 was configured as host-only")
Reported-by: Kenta Sato <tosainu.maple@gmail.com>
Closes: https://lore.kernel.org/linux-usb/ZPUciRLUcjDywMVS@debian.me/
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Kenta Sato <tosainu.maple@gmail.com>
Link: https://lore.kernel.org/r/70aea513215d273669152696cc02b20ddcdb6f1a.1694564261.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When NCM is used with hosts like Windows PC, it is observed that there are
multiple NTB's contained in one usb request giveback. Since the driver
unwraps the obtained request data assuming only one NTB is present, we
loose the subsequent NTB's present resulting in data loss.
Fix this by checking the parsed block length with the obtained data
length in usb request and continue parsing after the last byte of current
NTB.
Cc: stable@vger.kernel.org
Fixes: 9f6ce4240a ("usb: gadget: f_ncm.c added")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230927105858.12950-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When multiple threads are performing USB transmission, musb->lock will be
unlocked when musb_giveback is executed. At this time, qh may be released
in the dequeue process in other threads, resulting in a wild pointer, so
it needs to be here get qh again, and judge whether qh is NULL, and when
dequeue, you need to set qh to NULL.
Fixes: dbac5d07d1 ("usb: musb: host: don't start next rx urb if current one failed")
Cc: stable@vger.kernel.org
Signed-off-by: Xingxing Luo <xingxing.luo@unisoc.com>
Link: https://lore.kernel.org/r/20230919033055.14085-1-xingxing.luo@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
musb HWVers rgister address is not 0x69, if we operate the
wrong address 0x69, it will cause a kernel crash, because
there is no register corresponding to this address in the
additional control register of musb. In fact, HWVers has
been defined in musb_register.h, and the name is
"MUSB_HWVERS", so We need to use this macro instead of 0x69.
Fixes: c2365ce5d5 ("usb: musb: replace hard coded registers with defines")
Cc: stable@vger.kernel.org
Signed-off-by: Xingxing Luo <xingxing.luo@unisoc.com>
Link: https://lore.kernel.org/r/20230922075929.31074-1-xingxing.luo@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gadget ACM while unloading module try to dequeue not queued usb
request which causes the kernel to crash.
Patch adds extra condition to check whether usb request is processed
by CDNSP driver.
cc: stable@vger.kernel.org
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230713081429.326660-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This includes following fixes for v6.6-rc3:
- Add a workaround for IOMMU faults for certain systems with Intel
Maple Ridge
- Make sure lane 1 is in CL0 before bonding lanes
- Correct TMU mode initialization from hardware
- Restart XDomain discovery handshake after failure.
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iQJUBAABCgA+FiEEVTdhRGBbNzLrSUBaAP2fSd+ZWKAFAmUJM+ggHG1pa2Eud2Vz
dGVyYmVyZ0BsaW51eC5pbnRlbC5jb20ACgkQAP2fSd+ZWKDX2BAAmusck45ea8dB
rd1GYV5nzzYfc3k6QHvS2U7PMTyZntzZ9RqsU+0LxQg7s3bByr2wVmZLwxghxjZf
UteMg96xlV9sdJZG09/dADNBLvrTRRoT6zGnt25wJPAlYJie8Kka/F6AEmQQB2jm
IlX9j2C4kSXxxW+0p4h4ZCL4md0oUwSyn42owx1t8Xg8KyFe+xBNcW4E8mn8AF4P
+8i/r3fTSBTyI8UIZYanVRggBCsw0AM1HSSjRtczV1W+XpHMNyyTu9qPfN30SWm4
1JjWZobjeKdVHdUMKlYrAn1wjP/WZBqwAQ4AWGTXEhCao0suT23mlZKwM7yEY8xh
npYRv3o+Ns7aFVhDyzulEkkvrfFKNbnhik6Ru6FlPqbR3HTh3PQj4l6eYu3F9d6a
TgOXNATy7//6Kcr+1Vk5Bp1iMq0SUrJKCjRCEg0HTAMM9+pRuhhg2s+Ld/hKDEB5
Rt+1byyMZH6Qm3MquY/nNN7E6dzOdXzIF0+T0WC6ASm04Lw1pGqi9xb++ClDDqhm
Hl3sMiR0MHj4BBCHW6wSYfuqEnJycmqXmC5nDVzpmdiJhPMAfJ9Ju6fwaWaNM05K
nQmfscFPJ2m4dcEHFlhiiVnelE7BRbE6+AJpHGtuN7zBEyaEsDcrWTNK7fQbKqdP
M/HLO2yqcx/0NMgm+bGyFGZUOwP42ic=
=I/5N
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.6-rc3
This includes following fixes for v6.6-rc3:
- Add a workaround for IOMMU faults for certain systems with Intel
Maple Ridge
- Make sure lane 1 is in CL0 before bonding lanes
- Correct TMU mode initialization from hardware
- Restart XDomain discovery handshake after failure.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Restart XDomain discovery handshake after failure
thunderbolt: Correct TMU mode initialization from hardware
thunderbolt: Check that lane 1 is in CL0 before enabling lane bonding
thunderbolt: Workaround an IOMMU fault on certain systems with Intel Maple Ridge
Couple of fixes for the CoreSight self-hosted tracing
targeting v6.6. Includes :
- Fix runtime warnings while reusing the TMC-ETR buffer
- Fix (disable) warning when a large buffer is allocated in
the flat mode.
-----BEGIN PGP SIGNATURE-----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=mLe+
-----END PGP SIGNATURE-----
Merge tag 'coresight-fixes-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-linus
Suzuki writes:
coresight: Fixes for v6.6
Couple of fixes for the CoreSight self-hosted tracing
targeting v6.6. Includes :
- Fix runtime warnings while reusing the TMC-ETR buffer
- Fix (disable) warning when a large buffer is allocated in
the flat mode.
* tag 'coresight-fixes-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: tmc-etr: Disable warnings for allocation failures
coresight: Fix run time warnings while reusing ETR buffer
The counter_get_ext() function would incorrectly refer to the first
element of the extensions array to handle component array extensions
when they are located at a different index; a fix is provided to index
to the correct element in the array for this case. A fix for the
microchip-tcb-capture is provided as well to correct an inverted
internal GCLK logic for clock selection.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZPpOEgAKCRC1SFbKvhIj
KxAlAQCyTD0T0wA4iMegviHRb/Rw66Ae42XzmEUiwCjAPY+F4wD/ZJ5ULT+Tq0fE
uJJIhrj3vNglngt7rbCboJ2Ve1jyPgs=
=1Ztq
-----END PGP SIGNATURE-----
Merge tag 'counter-fixes-for-6.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
First set of Counter fixes for 6.6
The counter_get_ext() function would incorrectly refer to the first
element of the extensions array to handle component array extensions
when they are located at a different index; a fix is provided to index
to the correct element in the array for this case. A fix for the
microchip-tcb-capture is provided as well to correct an inverted
internal GCLK logic for clock selection.
* tag 'counter-fixes-for-6.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: microchip-tcb-capture: Fix the use of internal GCLK logic
counter: chrdev: fix getting array extensions
Initialize the structure to 0 so that it's fields won't have random
values. For example fields like rec.traffic_class (as well as
rec.flow_label and rec.sl) is used to generate the user AH through:
cma_iboe_join_multicast
cma_make_mc_event
ib_init_ah_from_mcmember
And a random traffic_class causes a random IP DSCP in RoCEv2.
Fixes: b5de0c60cc ("RDMA/cma: Fix use after free race in roce multicast join")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/20230927090511.603595-1-markzhang@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Commit 724768a393 ("ovl: fix incorrect fdput() on aio completion")
took a refcount on real file before submitting aio, but forgot to
avoid clearing FDPUT_FPUT from real.flags stack variable.
This can result in a file reference leak.
Fixes: 724768a393 ("ovl: fix incorrect fdput() on aio completion")
Reported-by: Gil Lev <contact@levgil.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Since commit 9bf19fbf0c ("media: v4l: async: Rework internal lists"), aka
v6.6-rc1~97^2~198, probing the tegra-video VI driver causes infinite
recursion due tegra_vi_graph_parse_one() calling itself until:
[ 1.571168] Insufficient stack space to handle exception!
...
[ 1.591416] Internal error: kernel stack overflow: 0 [#1] PREEMPT SMP ARM
...
[ 3.861013] of_phandle_iterator_init from __of_parse_phandle_with_args+0x40/0xf0
[ 3.868497] __of_parse_phandle_with_args from of_fwnode_graph_get_remote_endpoint+0x68/0xa8
[ 3.876938] of_fwnode_graph_get_remote_endpoint from fwnode_graph_get_remote_port_parent+0x30/0x7c
[ 3.885984] fwnode_graph_get_remote_port_parent from tegra_vi_graph_parse_one+0x7c/0x224
[ 3.894158] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224
[ 3.901459] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224
[ 3.908760] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224
[ 3.916061] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224
...
[ 4.857892] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224
[ 4.865193] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224
[ 4.872494] tegra_vi_graph_parse_one from tegra_vi_init+0x574/0x6d4
[ 4.878842] tegra_vi_init from host1x_device_init+0x84/0x15c
[ 4.884594] host1x_device_init from host1x_video_probe+0xa0/0x114
[ 4.890770] host1x_video_probe from really_probe+0xe0/0x400
The reason is the mentioned commit changed tegra_vi_graph_find_entity() to
search for an entity in the done notifier list:
> @@ -1464,7 +1464,7 @@ tegra_vi_graph_find_entity(struct tegra_vi_channel *chan,
> struct tegra_vi_graph_entity *entity;
> struct v4l2_async_connection *asd;
>
> - list_for_each_entry(asd, &chan->notifier.asc_list, asc_entry) {
> + list_for_each_entry(asd, &chan->notifier.done_list, asc_entry) {
> entity = to_tegra_vi_graph_entity(asd);
> if (entity->asd.match.fwnode == fwnode)
> return entity;
This is not always correct, being tegra_vi_graph_find_entity() called in
three locations, in this order:
1. tegra_vi_graph_parse_one() -- called while probing
2. tegra_vi_graph_notify_bound() -- the .bound notifier op
3. tegra_vi_graph_build() -- called in the .complete notifier op
Locations 1 and 2 are called before moving the entity from waiting_list to
done_list, thus they won't find what they are looking for in
done_list. Location 3 happens afterwards and thus it is not broken, however
it means tegra_vi_graph_find_entity() should not search in the same list
every time.
The error appears at step 1: tegra_vi_graph_parse_one() iterates
recursively until it finds the entity already notified, which now never
happens.
Fix by passing the specific notifier list pointer to
tegra_vi_graph_find_entity() instead of the channel, so each caller can
search in whatever list is correct.
Also improve the tegra_vi_graph_find_entity() comment.
Fixes: 9bf19fbf0c ("media: v4l: async: Rework internal lists")
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Sakari Ailus: Wrapped some long lines.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Some missing select statements were already added back, but I ran into
another one that is missing:
ERROR: modpost: "v4l2_fwnode_endpoint_free" [drivers/media/pci/intel/ivsc/ivsc-csi.ko] undefined!
ERROR: modpost: "v4l2_fwnode_endpoint_alloc_parse" [drivers/media/pci/intel/ivsc/ivsc-csi.ko] undefined!
ERROR: modpost: "v4l2_fwnode_endpoint_parse" [drivers/media/pci/intel/ivsc/ivsc-csi.ko] undefined!
Fixes: 29006e196a ("media: pci: intel: ivsc: Add CSI submodule")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Sakari Ailus: Drop V4L2_ASYNC dependency, it is implied now.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The current Kconfig symbol dependencies allow having the following Kconfig
symbol values
CONFIG_IPU_BRIDGE=m
CONFIG_VIDEO_IPU3_CIO2=y
CONFIG_CIO2_BRIDGE=n
This does not work as the IPU bridge API is conditional to
IS_ENABLED(CONFIG_IPU_BRIDGE). Fix this by changing the dependencies so
that CONFIG_IPU_BRIDGE can be separately selected.
The CONFIG_CIO2_BRIDGE symbol becomes redundant as a result and is
removed.
Fixes: 2545a2c02b ("media: ipu3-cio2: allow ipu_bridge to be a module again")
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The commit in Fixes has reordered the code and the error handling path.
However one 'goto' was missed.
Fix it and branch at the correct place in the error handling path.
Fixes: 5073d10cba ("media: pxa_camera: Register V4L2 device early")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Similarly to PXA3xx and MMP2, pinctrl-single isn't capable of setting
pin direction on MMP either.
Fixes: a770d94637 ("gpio: pxa: add pin control gpio direction and request")
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In the pathological case of building sky2 with 16k PAGE_SIZE, the
frag_addr[] array would never be used, so the original code was correct
that size should be 0. But the compiler now gets upset with 0 size arrays
in places where it hasn't eliminated the code that might access such an
array (it can't figure out that in this case an rx skb with fragments
would never be created). To keep the compiler happy, make sure there is
at least 1 frag_addr in struct rx_ring_info:
In file included from include/linux/skbuff.h:28,
from include/net/net_namespace.h:43,
from include/linux/netdevice.h:38,
from drivers/net/ethernet/marvell/sky2.c:18:
drivers/net/ethernet/marvell/sky2.c: In function 'sky2_rx_unmap_skb':
include/linux/dma-mapping.h:416:36: warning: array subscript i is outside array bounds of 'dma_addr_t[0]' {aka 'long long unsigned int[]'} [-Warray-bounds=]
416 | #define dma_unmap_page(d, a, s, r) dma_unmap_page_attrs(d, a, s, r, 0)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/marvell/sky2.c:1257:17: note: in expansion of macro 'dma_unmap_page'
1257 | dma_unmap_page(&pdev->dev, re->frag_addr[i],
| ^~~~~~~~~~~~~~
In file included from drivers/net/ethernet/marvell/sky2.c:41:
drivers/net/ethernet/marvell/sky2.h:2198:25: note: while referencing 'frag_addr'
2198 | dma_addr_t frag_addr[ETH_JUMBO_MTU >> PAGE_SHIFT];
| ^~~~~~~~~
With CONFIG_PAGE_SIZE_16KB=y, PAGE_SHIFT == 14, so:
#define ETH_JUMBO_MTU 9000
causes "ETH_JUMBO_MTU >> PAGE_SHIFT" to be 0. Use "?: 1" to solve this build warning.
Cc: Mirko Lindner <mlindner@marvell.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309191958.UBw1cjXk-lkp@intel.com/
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 23d775f12d ("net: dsa: mv88e6xxx: Wait for EEPROM done
before HW reset") the following error is seen on a imx8mn board with
a 88E6320 switch:
mv88e6085 30be0000.ethernet-1:00: Timeout waiting for EEPROM done
This board does not have an EEPROM attached to the switch though.
This problem is well explained by Andrew Lunn:
"If there is an EEPROM, and the EEPROM contains a lot of data, it could
be that when we perform a hardware reset towards the end of probe, it
interrupts an I2C bus transaction, leaving the I2C bus in a bad state,
and future reads of the EEPROM do not work.
The work around for this was to poll the EEInt status and wait for it
to go true before performing the hardware reset.
However, we have discovered that for some boards which do not have an
EEPROM, EEInt never indicates complete. As a result,
mv88e6xxx_g1_wait_eeprom_done() spins for a second and then prints a
warning.
We probably need a different solution than calling
mv88e6xxx_g1_wait_eeprom_done(). The datasheet for 6352 documents the
EEPROM Command register:
bit 15 is:
EEPROM Unit Busy. This bit must be set to a one to start an EEPROM
operation (see EEOp below). Only one EEPROM operation can be
executing at one time so this bit must be zero before setting it to
a one. When the requested EEPROM operation completes this bit will
automatically be cleared to a zero. The transition of this bit from
a one to a zero can be used to generate an interrupt (the EEInt in
Global 1, offset 0x00).
and more interesting is bit 11:
Register Loader Running. This bit is set to one whenever the
register loader is busy executing instructions contained in the
EEPROM."
Change to using mv88e6xxx_g2_eeprom_wait() to fix the timeout error
when the EEPROM chip is not present.
Fixes: 23d775f12d ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
When device_add() fails, ptp_ocp_dev_release() will be called
after put_device(). Therefore, it seems that the
ptp_ocp_dev_release() before put_device() is redundant.
Fixes: 773bda9649 ("ptp: ocp: Expose various resources on the timecard.")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Vadim Feodrenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix the module compression with xz so the in-kernel decompressor works
- Document a kconfig idiom to express an optional dependency between
modules
- Make modpost, when W=1 is given, detect broken drivers that reference
.exit.* sections
- Remove unused code
-----BEGIN PGP SIGNATURE-----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=RJdX
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix the module compression with xz so the in-kernel decompressor
works
- Document a kconfig idiom to express an optional dependency between
modules
- Make modpost, when W=1 is given, detect broken drivers that reference
.exit.* sections
- Remove unused code
* tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: remove stale code for 'source' symlink in packaging scripts
modpost: Don't let "driver"s reference .exit.*
vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros
modpost: add missing else to the "of" check
Documentation: kbuild: explain handling optional dependencies
kbuild: Use CRC32 and a 1MiB dictionary for XZ compressed modules
to issues which were introduced after 6.5.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZRmSDAAKCRDdBJ7gKXxA
jlSaAQCe3SnBdjRmuzbp5iIfNJOY7GXLN4NwMsArRUxRGY27IwD+KWhXZP/ydVnt
ZgS4x9rmarHuh5Pxds+6SRGhihRz/Ak=
=sf/5
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Fourteen hotfixes, eleven of which are cc:stable. The remainder
pertain to issues which were introduced after 6.5"
* tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Crash: add lock to serialize crash hotplug handling
selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error
mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified
mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()
mm, memcg: reconsider kmem.limit_in_bytes deprecation
mm: zswap: fix potential memory corruption on duplicate store
arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries
mm: hugetlb: add huge page size param to set_huge_pte_at()
maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states
maple_tree: add mas_is_active() to detect in-tree walks
nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
mm: abstract moving to the next PFN
mm: report success more often from filemap_map_folio_range()
fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
Here is a single, much requested, fix for a set of misc drivers to
resolve a much reported regression in the -rc series that has also
propagated back to the stable releases. Sorry for the delay, lots of
conference travel for a few weeks put me very far behind in patch
wrangling.
It has been reported by many to resolve the reported problem, and has
been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZRlkBA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymXywCgpZTozZr59dQeF48Z+iy2xBbimIUAoIqXUf/Q
5/iAwx8K5CHWBjXfwmaS
=AG4X
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver fix from Greg KH:
"Here is a single, much requested, fix for a set of misc drivers to
resolve a much reported regression in the -rc series that has also
propagated back to the stable releases. Sorry for the delay, lots of
conference travel for a few weeks put me very far behind in patch
wrangling.
It has been reported by many to resolve the reported problem, and has
been in linux-next with no reported issues"
* tag 'char-misc-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe
