Algorithms must never be added to a driver unless there is a generic
implementation. These truncated versions of sha512 slipped through.
Remove them as they are useless.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than having the callback in the request, move it into the
crypto_alg object. This avoids having crypto_engine look into the
request context is private to the driver.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Most drivers should not access the internal details of struct
crypto_engine. Move it into the internal header file.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Create crypto/internal/engine.h to house details that should not
be used by drivers. It is empty for the time being.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The engine file does not need the actual crypto type definitions
so move those header inclusions to where they are actually used.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file jh7110-cryp uses ahash_request without including
crypto/hash.h. Fix that by adding the inclusion.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some newer SoCs (like SM8450) do not require a clock vote for the PRNG
to function. Make it entirely optional and rely on the bindings checker
to ensure platforms that need it, consume one.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SM8450's PRNG does not require a core clock reference. Add a new
compatible with a qcom,prng-ee fallback and handle that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some configurations with gcc-12 or gcc-13 produce a warning for the source
and destination of a memcpy() in atmel_sha_hmac_compute_ipad_hash() potentially
overlapping:
In file included from include/linux/string.h:254,
from drivers/crypto/atmel-sha.c:15:
drivers/crypto/atmel-sha.c: In function 'atmel_sha_hmac_compute_ipad_hash':
include/linux/fortify-string.h:57:33: error: '__builtin_memcpy' accessing 129 or more bytes at offsets 408 and 280 overlaps 1 or more bytes at offset 408 [-Werror=restrict]
57 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:648:9: note: in expansion of macro '__underlying_memcpy'
648 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:693:26: note: in expansion of macro '__fortify_memcpy_chk'
693 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/crypto/atmel-sha.c:1773:9: note: in expansion of macro 'memcpy'
1773 | memcpy(hmac->opad, hmac->ipad, bs);
| ^~~~~~
The same thing happens in two more drivers that have the same logic:
drivers/crypto/chelsio/chcr_algo.c: In function 'chcr_ahash_setkey':
include/linux/fortify-string.h:57:33: error: '__builtin_memcpy' accessing 129 or more bytes at offsets 260 and 132 overlaps 1 or more bytes at offset 260 [-Werror=restrict]
drivers/crypto/bcm/cipher.c: In function 'ahash_hmac_setkey':
include/linux/fortify-string.h:57:33: error: '__builtin_memcpy' accessing between 129 and 4294967295 bytes at offsets 840 and 712 overlaps between 1 and 4294967167 bytes at offset 840 [-Werror=restrict]
I don't think it can actually happen because the size is strictly bounded
to the available block sizes, at most 128 bytes, though inlining decisions
could lead gcc to not see that.
Use the unsafe_memcpy() helper instead of memcpy(), with the only difference
being that this skips the hardening checks that produce the warning.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Chips such as BCM7278 support system wide suspend/resume which will
cause the HWRNG block to lose its state and reset to its power on reset
register values. We need to cleanup and re-initialize the HWRNG for it
to be functional coming out of a system suspend cycle.
Fixes: c3577f6100 ("hwrng: iproc-rng200 - Add support for BCM7278")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove duplicated include of linux/random.h. Resolves checkincludes
message. And adjust includes in alphabetical order.
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
exynos-rng.c:280:14: error: cast to smaller integer type 'enum exynos_prng_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are cases when the interrupt status register (JRINTR) is non-zero,
even though:
1. An interrupt was generated, but it was masked OR
2. There was no interrupt generated at all
for the corresponding job ring.
1. The case when interrupt is masked (JRCFGR_LS[IMSK]=1b'1)
while other events have happened and are being accounted for, e.g.
-JRINTR[HALT]=2b'10 - input job ring underwent a flush of all on-going
jobs and processing of still-existing jobs (sitting in the ring) has been
halted
-JRINTR[HALT]=2b'01 - input job ring is currently undergoing a flush
-JRINTR[ENTER_FAIL]=1b'1 - SecMon / SNVS transitioned to FAIL MODE
It doesn't matter whether these events would assert the interrupt signal
or not, interrupt is anyhow masked.
2. The case when interrupt is not masked (JRCFGR_LS[IMSK]=1b'0), however
the events accounted for in JRINTR do not generate interrupts, e.g.:
-JRINTR[HALT]=2b'01
-JRINTR[ENTER_FAIL]=1b'1 and JRCFGR_MS[FAIL_MODE]=1b'0
Currently in these cases, when the JR interrupt handler is invoked (as a
consequence of JR sharing the interrupt line with other devices - e.g.
the two JRs on i.MX7ULP) it continues execution instead of returning
IRQ_NONE.
This could lead to situations like interrupt handler clearing JRINTR (and
thus also the JRINTR[HALT] field) while corresponding job ring is
suspended and then that job ring failing on resume path, due to expecting
JRINTR[HALT]=b'10 and reading instead JRINTR[HALT]=b'00.
Fix this by checking status of JRINTR[JRI] in the JR interrupt handler.
If JRINTR[JRI]=1b'0, there was no interrupt generated for this JR and
handler must return IRQ_NONE.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In caam_jr_enqueue, under heavy DDR load, smp_wmb() or dma_wmb()
fail to make the input ring be updated before the CAAM starts
reading it. So, CAAM will process, again, an old descriptor address
and will put it in the output ring. This will make caam_jr_dequeue()
to fail, since this old descriptor is not in the software ring.
To fix this, use wmb() which works on the full system instead of
inner/outer shareable domains.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The newly added PM operations use the deprecated SIMPLE_DEV_PM_OPS() macro,
causing a warning in some configurations:
drivers/crypto/caam/ctrl.c:828:12: error: 'caam_ctrl_resume' defined but not used [-Werror=unused-function]
828 | static int caam_ctrl_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~
drivers/crypto/caam/ctrl.c:818:12: error: 'caam_ctrl_suspend' defined but not used [-Werror=unused-function]
818 | static int caam_ctrl_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~
drivers/crypto/caam/jr.c:732:12: error: 'caam_jr_resume' defined but not used [-Werror=unused-function]
732 | static int caam_jr_resume(struct device *dev)
| ^~~~~~~~~~~~~~
drivers/crypto/caam/jr.c:687:12: error: 'caam_jr_suspend' defined but not used [-Werror=unused-function]
687 | static int caam_jr_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~
Use the normal DEFINE_SIMPLE_DEV_PM_OPS() variant now, and use pm_ptr() to
completely eliminate the structure in configs without CONFIG_PM.
Fixes: 322d74752c ("crypto: caam - add power management support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case the downstream bridge or panel uses DSI transfers before the
DSI host was actually initialized through samsung_dsim_atomic_enable()
which clears the stop state (LP11) mode, all transfers will fail.
This happens with downstream bridges that are controlled by DSI
commands such as the tc358762.
As documented in [1] DSI hosts are expected to allow transfers
outside the normal bridge enable/disable flow.
To fix this make sure that stop state is cleared in
samsung_dsim_host_transfer() which restores the previous
behavior.
We also factor out the common code to enable/disable stop state
to samsung_dsim_set_stop_state().
[1] https://docs.kernel.org/gpu/drm-kms-helpers.html#mipi-dsi-bridge-operation
Fixes: 0c14d31306 ("drm: bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec")
Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724151640.555490-1-frieder@fris.de
Delete duplicate word "the"
[chandan: Fix mangled patch]
Signed-off-by: Zizhen Pang <pangzizhen001@208suo.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
For some unknown reason, when I converted the incore dquot objects to
store the dquot id in host endian order, I removed the increment here.
This causes the scan to stop after retrieving the root dquot, which
severely limits the usefulness of the quota scrubber. Fix the lost
increment, though it won't fix the problem that the quota iterator code
filters out zeroed dquot records.
Fixes: c51df73341 ("xfs: stop using q_core.d_id in the quota code")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
This series amends the file extent map checking code so that nonexistent
cow/attr forks get the ENOENT return they're supposed to; and fixes some
incorrect logic about the presence of a cow fork vs. reflink iflag.
This has been running on the djcloud for years with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZNT+WQAKCRBKO3ySh0YR
pl9yAQCuAluDN+6ToSqmGrubdnnjlUhQZPJMbo8orE5/M4F0wgEAl8fI+JBs3psd
L3F/qsJEVy02bbVpONUCvDTFU/4wNwg=
=tL3U
-----END PGP SIGNATURE-----
Merge tag 'scrub-bmap-fixes-6.6_2023-08-10' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.6-mergeA
xfs: fixes for the block mapping checker
This series amends the file extent map checking code so that nonexistent
cow/attr forks get the ENOENT return they're supposed to; and fixes some
incorrect logic about the presence of a cow fork vs. reflink iflag.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
* tag 'scrub-bmap-fixes-6.6_2023-08-10' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: don't check reflink iflag state when checking cow fork
xfs: simplify returns in xchk_bmap
xfs: rewrite xchk_inode_is_allocated to work properly
xfs: hide xfs_inode_is_allocated in scrub common code
This series contains a couple of bug fixes to the AGFL repair code that
came up during QA.
This has been running on the djcloud for years with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZNT+WAAKCRBKO3ySh0YR
ptuaAP9QE9S4/7293ZidQHP9BDgPLdIpJyc95/g55BY8Ppb6ywD+NmtDIlYb2BPF
WcGfY6jLypDy/F+YCXPaufsjq+HcfgI=
=Ee53
-----END PGP SIGNATURE-----
Merge tag 'repair-agfl-fixes-6.6_2023-08-10' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.6-mergeA
xfs: fixes to the AGFL repair code
This series contains a couple of bug fixes to the AGFL repair code that
came up during QA.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
* tag 'repair-agfl-fixes-6.6_2023-08-10' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: fix agf_fllast when repairing an empty AGFL
xfs: clear pagf_agflreset when repairing the AGFL
This patchset adds a new IFLAG to the scrub ioctl so that userspace can
force a rebuild of an otherwise consistent piece of metadata. This will
eventually enable the use of online repair to relocate metadata during a
filesystem reorganization (e.g. shrink). For now, it facilitates stress
testing of online repair without needing the debugging knobs to be
enabled.
This has been running on the djcloud for years with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZNT+WAAKCRBKO3ySh0YR
pq3EAQC6+TQORGg6EnB6997Ftl07v0z7lLWJI5iS4JrGQPAnqwEA2W4cG8daGTAo
hJyIrT4wBM92rSnWK6S8uVU2cCarbAk=
=ZNnN
-----END PGP SIGNATURE-----
Merge tag 'repair-force-rebuild-6.6_2023-08-10' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.6-mergeA
xfs: force rebuilding of metadata
This patchset adds a new IFLAG to the scrub ioctl so that userspace can
force a rebuild of an otherwise consistent piece of metadata. This will
eventually enable the use of online repair to relocate metadata during a
filesystem reorganization (e.g. shrink). For now, it facilitates stress
testing of online repair without needing the debugging knobs to be
enabled.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
* tag 'repair-force-rebuild-6.6_2023-08-10' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: allow userspace to rebuild metadata structures
xfs: don't complain about unfixed metadata when repairs were injected
Before we start adding online repair functionality, there's a few tweaks
that I'd like to make to the common repair code. First is a fix to the
integration between repair and the health status code that was
interfering with repair re-evaluations. Second is a minor tweak to the
sole existing repair functions to make one last check that the user
hasn't terminated the calling process before we start writing to the
filesystem. This is a pattern that will repeat throughout the rest of
the repair functions.
This has been running on the djcloud for years with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZNT+WAAKCRBKO3ySh0YR
poolAP9yVrzlW+ni3nKOHQYsbU3Id+uNceytkBh1kAqPayggegEA0FKLbzrVb6IP
jXN6YL2QUyNbDQX7WDtVeIkFOe+S2Qo=
=UeKu
-----END PGP SIGNATURE-----
Merge tag 'repair-tweaks-6.6_2023-08-10' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.6-mergeA
xfs: miscellaneous repair tweaks
Before we start adding online repair functionality, there's a few tweaks
that I'd like to make to the common repair code. First is a fix to the
integration between repair and the health status code that was
interfering with repair re-evaluations. Second is a minor tweak to the
sole existing repair functions to make one last check that the user
hasn't terminated the calling process before we start writing to the
filesystem. This is a pattern that will repeat throughout the rest of
the repair functions.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
* tag 'repair-tweaks-6.6_2023-08-10' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: allow the user to cancel repairs before we start writing
xfs: always rescan allegedly healthy per-ag metadata after repair
This patchset implements an online checker for the realtime summary
file. The first few changes are some general cleanups -- scrub should
get its own references to all inodes, and we also wrap the inode lock
functions so that we can standardize unlocking and releasing inodes that
are the focus of a scrub.
With that out of the way, we move on to constructing a shadow copy of
the rtsummary information from the rtbitmap, and compare the new copy
against the ondisk copy.
This has been running on the djcloud for years with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZNT+WAAKCRBKO3ySh0YR
pgDVAPsEWPE0rPh6NtW1uJZkE7pXMQM1hm+5SWx11nD2DQl7cwD/QdIB1Nha2FUo
1M4ib1ERq9Fut8EV919BSRrn9AacHAk=
=jK1O
-----END PGP SIGNATURE-----
Merge tag 'scrub-rtsummary-6.6_2023-08-10' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.6-mergeA
xfs: online scrubbing of realtime summary files
This patchset implements an online checker for the realtime summary
file. The first few changes are some general cleanups -- scrub should
get its own references to all inodes, and we also wrap the inode lock
functions so that we can standardize unlocking and releasing inodes that
are the focus of a scrub.
With that out of the way, we move on to constructing a shadow copy of
the rtsummary information from the rtbitmap, and compare the new copy
against the ondisk copy.
This has been running on the djcloud for years with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
* tag 'scrub-rtsummary-6.6_2023-08-10' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: implement online scrubbing of rtsummary info
xfs: move the realtime summary file scrubber to a separate source file
xfs: wrap ilock/iunlock operations on sc->ip
xfs: get our own reference to inodes that we want to scrub
Use macros defined in linux/cleanup.h to automate resource lifetime
control in gpio-sim.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
