Use the P10 quad FSI CFAM description to reduce duplication and add the
I2C responders and associated engines.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230809074921.116987-5-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add linux device tree entry for Yosemite 4 devices connected to BMC.
The Yosemite 4 is a Meta multi-node server platform, based on AST2600 SoC.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230810070032.335161-3-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Document the new compatibles used on Facebook Yosemite 4.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810070032.335161-2-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Set eMMC max frequency to 25MHz to prevent intermittent eMMC access
failures.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230803230324.731268-4-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable ASPEED-ADC channels 5-8 to support voltage monitoring of all the
Wedge400 hardware revisions.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230803230324.731268-3-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Set FMC controller to "spi0" in ast2500-facebook-netbmc-common.dtsi so
the spi bus is consistent with the flash labels defined in flash layout.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230803230324.731268-2-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable "user." extended attributes on tmpfs, limiting them by tracking
the space they occupy, and deducting that space from the limited ispace
(unless tmpfs mounted with nr_inodes=0 to leave that ispace unlimited).
tmpfs inodes and simple xattrs are both unswappable, and have to be in
lowmem on a 32-bit highmem kernel: so the ispace limit is appropriate
for xattrs, without any need for a further mount option.
Add simple_xattr_space() to give approximate but deterministic estimate
of the space taken up by each xattr: with simple_xattrs_free() outputting
the space freed if required (but kernfs and even some tmpfs usages do not
require that, so don't waste time on strlen'ing if not needed).
Security and trusted xattrs were already supported: for consistency and
simplicity, account them from the same pool; though there's a small risk
that a tmpfs with enough space before would now be considered too small.
When extended attributes are used, "df -i" does show more IUsed and less
IFree than can be explained by the inodes: document that (manpage later).
xfstests tests/generic which were not run on tmpfs before but now pass:
020 037 062 070 077 097 103 117 337 377 454 486 523 533 611 618 728
with no new failures.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Message-Id: <2e63b26e-df46-5baa-c7d6-f9a8dd3282c5@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
For both SVE and SME we abuse the generic register field comparison
support in the cpufeature code as part of our detection of unsupported
variations in the vector lengths available to PEs, reporting the maximum
vector lengths via ZCR_EL1.LEN and SMCR_EL1.LEN. Since these are
configuration registers rather than identification registers the
assumptions the cpufeature code makes about how unknown bitfields behave
are invalid, leading to warnings when SME features like FA64 are enabled
and we hotplug a CPU:
CPU features: SANITY CHECK: Unexpected variation in SYS_SMCR_EL1. Boot CPU: 0x0000000000000f, CPU3: 0x0000008000000f
CPU features: Unsupported CPU feature variation detected.
SVE has no controls other than the vector length so is not yet impacted
but the same issue will apply there if any are defined.
Since the only field we are interested in having the cpufeature code
handle is the length field and we use a custom read function to obtain
the value we can avoid these warnings by filtering out all other bits
when we return the register value, if we're doing that we don't need to
bother reading the register at all and can simply use the RDVL/RDSVL
value we were filling in instead.
Fixes: 2e0f2478ea ("arm64/sve: Probe SVE capabilities and usable vector lengths")
FixeS: b42990d3bf ("arm64/sme: Identify supported SME vector lengths at boot")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230731-arm64-sme-fa64-hotplug-v2-1-7714c00dd902@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The BlueField has internal registers to store the ARM boot states.
Support setting the BlueField ARM boot state to "OS up".
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20230809162857.21243-3-asmaa@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Enable reading and writing the size of the memory region associated
with the large ICM carveout.
The max size of the large ICM carveout is 1TB, has a granularity
of 128MB and will be passed and printed in hex. The size unit is MB.
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20230809162857.21243-2-asmaa@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The assertion added to verify the difference in bits set of the
addresses of srso_untrain_ret_alias() and srso_safe_ret_alias() would fail
to link in LLVM's ld.lld linker with the following error:
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:210: at least one side of
the expression must be absolute
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:211: at least one side of
the expression must be absolute
Use ABSOLUTE to evaluate the expression referring to at least one of the
symbols so that LLD can evaluate the linker script.
Also, add linker version info to the comment about XOR being unsupported
in either ld.bfd or ld.lld until somewhat recently.
Fixes: fb3bd914b3 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Closes: https://lore.kernel.org/llvm/CA+G9fYsdUeNu-gwbs0+T6XHi4hYYk=Y9725-wFhZ7gJMspLDRA@mail.gmail.com/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Daniel Kolesa <daniel@octaforge.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Sven Volkinsfeld <thyrc@gmx.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://github.com/ClangBuiltLinux/linux/issues/1907
Link: https://lore.kernel.org/r/20230809-gds-v1-1-eaac90b0cbcc@google.com
Add a note about the dependency of the User->User mitigation on the
previous Spectre v2 IBPB selection.
Make the layout moar pretty.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230809102700.29449-4-bp@alien8.de
Make them all a weak function, aliasing to a single function which
issues the "Not affected" string.
No functional changes.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20230809102700.29449-3-bp@alien8.de
SA8775 and newer target have added support for an increased number of
interrupt targets. To implement this change, the intr_target field, which
is used to configure the interrupt target in the interrupt configuration
register is increased from 3 bits to 4 bits.
In accordance to these updates, a new intr_target_width member is
introduced in msm_pingroup structure. This member stores the value of
width of intr_target field in the interrupt configuration register. This
value is used to dynamically calculate and generate mask for setting the
intr_target field. By default, this mask is set to 3 bit wide, to ensure
backward compatibility with the older targets.
Fixes: 4b6b185599 ("pinctrl: qcom: add the tlmm driver sa8775p platforms")
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Ninad Naik <quic_ninanaik@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230809100634.3961-1-quic_ninanaik@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Most of the index.rst files in Documentation/ refer to other rst files
without their file extension in the name. Do that here too.
No functional changes.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230809102700.29449-2-bp@alien8.de
We can have gpiochip_add_data() return -EPROBE_DEFER which will make
us produce the "unable to add GPIO chip" message which is confusing.
Use dev_err_probe() to silence probe deferral messages.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230808180733.2081353-3-florian.fainelli@broadcom.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We can have gpiochip_add_data() return -EPROBE_DEFER which will make us
produce the "unable to add GPIO chip" message which is confusing. Use
dev_err_probe() to silence probe deferral messages.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230808180733.2081353-2-florian.fainelli@broadcom.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the "ti,am654-padconf" compatible to enable the use of wake-up enable
and event bits on K3 SOCs that support the daisychain feature
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230808102207.130177-3-d-gole@ti.com
[Alphabetized the compatible list]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Check for sb->s_type which is the right place to look at the file system
type, not the holder, which is just an implementation detail in the VFS
helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-6-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Use the generic setup_bdev_super helper to open the main block device
and do various bits of superblock setup instead of duplicating the
logic. This includes moving to the new scheme implemented in common
code that only opens the block device after the superblock has allocated.
It does not yet convert nilfs2 to the new mount API, but doing so will
become a bit simpler after this first step.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Message-Id: <20230802154131.2221419-3-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We'll want to use setup_bdev_super instead of duplicating it in nilfs2.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-2-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently get_tree_bdev and mount_bdev open the block device before
committing to allocating a super block. That creates problems for
restricting the number of writers to a device, and also leads to a
unusual and not very helpful holder (the fs_type).
Reorganize the super block code to first look whether the superblock for
a particular device does already exist and open the block device only if
it doesn't.
[hch: port to before the bdev_handle changes,
duplicate the bdev read-only check from blkdev_get_by_path,
extend the fsfree_mutex coverage to protect against freezes,
fix an open bdev leak when the bdev is frozen,
use the bdev local variable more,
rename the s variable to sb to be more descriptive]
[brauner: remove references to mounts as they're mostly irrelevant]
[brauner & hch: fold fixes for romfs and cramfs for
syzbot+2faac0423fdc9692822b@syzkaller.appspotmail.com]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230724175145.201318-1-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
As a rule of thumb everything allocated to the fs_context and moved into
the super_block should be freed by ->kill_sb so that the teardown
handling doesn't need to be duplicated between the fill_super error
path and put_super. Implement an ntfs3-specific kill_sb method to do
that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230809220545.1308228-14-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
kill_block_super will call sync_blockdev just a tad later already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230809220545.1308228-13-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
put_ntfs is a rather unconventional name for a function that frees the
sbi and associated resources. Give it a more descriptive name and drop
the duplicate name in the top of the function comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230809220545.1308228-12-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
As a rule of thumb everything allocated to the fs_context and moved into
the super_block should be freed by ->kill_sb so that the teardown
handling doesn't need to be duplicated between the fill_super error
path and put_super. Implement an exfat-specific kill_sb method to do
that and share the code with the mount contex free helper for the
mount error handling case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230809220545.1308228-11-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
There are no RCU critical sections for accessing any information in the
sbi, so drop the call_rcu indirection for freeing the sbi.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230809220545.1308228-10-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
blkdev_put must not be called under sb->s_umount to avoid a lock order
reversal with disk->open_mutex. Move closing the external journal device
into ->kill_sb to archive that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230809220545.1308228-9-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Copy and paste the commit message from Darrick into a comment to explain
the seemingly odd invalidate_bdev in xfs_shutdown_devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-8-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
blkdev_put must not be called under sb->s_umount to avoid a lock order
reversal with disk->open_mutex. Move closing the buftargs into ->kill_sb
to archive that. Note that the flushing of the disk caches and
block device mapping invalidated needs to stay in ->put_super as the main
block device is closed in kill_block_super already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-7-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Closing the block devices logically belongs into xfs_free_buftarg, So
instead of open coding it in the caller move it there and add a check
for the s_bdev so that the main device isn't close as that's done by the
VFS helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-6-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
There isn't much use for this trivial wrapper, especially as the NULL
check is only needed in a single call site.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-5-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
As a rule of thumb everything allocated to the fs_context and moved into
the super_block should be freed by ->kill_sb so that the teardown
handling doesn't need to be duplicated between the fill_super error
path and put_super. Implement a XFS-specific kill_sb method to do that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-4-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
->put_super is only called when sb->s_root is set, and thus when
fill_super succeeds. Thus drop the NULL check that can't happen in
xfs_fs_put_super.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-3-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The xfs_fs_free prototype formatting is a weird mix of the classic XFS
style and the Linux style. Fix it up to be consistent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-2-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add the "ti,am654-padconf" compatible to support the new wakeup enable and
status bits positions on K3 family SOCs that support the IO daisychain
feature.
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230808102207.130177-2-d-gole@ti.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the dev_err_probe function instead of dev_err in the probe function
so that the printed message includes the return value and also handles
-EPROBE_DEFER nicely.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20230808012954.1643834-10-liaochang1@huawei.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
