This code was previously part of the VIDEO_IPU3_CIO2 driver, which could
be built-in or a loadable module, but after the move it turned into a
builtin-only driver. This fails to link when the I2C subsystem is a
module:
x86_64-linux-ld: drivers/media/pci/intel/ipu-bridge.o: in function `ipu_bridge_unregister_sensors':
ipu-bridge.c:(.text+0x50): undefined reference to `i2c_unregister_device'
x86_64-linux-ld: drivers/media/pci/intel/ipu-bridge.o: in function `ipu_bridge_init':
ipu-bridge.c:(.text+0x9c9): undefined reference to `i2c_acpi_new_device_by_fwnode'
In general, drivers should not have to be built-in, so change the option
to a tristate with the corresponding dependency. This in turn opens a
new problem with the dependency, as the IPU bridge can be a loadable module
while the ipu3 driver itself is built-in, producing a new link failure:
86_64-linux-ld: drivers/media/pci/intel/ipu3/ipu3-cio2.o: in function `cio2_pci_probe':
ipu3-cio2.c:(.text+0x197e): undefined reference to `ipu_bridge_init'
In order to fix this, restore the old Kconfig option that controlled
the ipu bridge driver before it was split out, but make it select a
hidden symbol that now corresponds to the bridge driver.
When other drivers get added that share ipu-bridge, this should cover
all corner cases, and allow any combination of them to be built-in
or modular.
Link: https://lore.kernel.org/linux-media/20230727122331.2421453-1-arnd@kernel.org
Fixes: 881ca25978 ("media: ipu3-cio2: rename cio2 bridge to ipu bridge and move out of ipu3")'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The CEC interrupt is only needed if userspace wants to monitor
the CEC pin for an unconfigured CEC device. That gives it the
most precise CEC pin debugging results.
This avoids a corner case where the interrupt is enabled for
a short period when the adapter is about to be configured.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Since the CEC pin framework now keeps track of the interrupt
and calls disable_irq when the kthread stops, there is no
longer any need for the cec-gpio driver to do this in the
free callback. So drop this code.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The CEC pin framework needs a bit more control over the interrupt
handling: make sure that the disable_irq op is called even if the
device node is unregistered, log the state of the interrupt in
debugfs, and disable the interrupt when the kernel thread is stopped.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use IRQF_NO_AUTOEN rather than manually disabling the requested
interrupt.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Describe the new callbacks and clarify when the adap->lock
mutex is held or not.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The adap_configured() callback was called with the adap->lock mutex
held if the 'configured' argument was false, and without the adap->lock
mutex held if that argument was true.
That was very confusing, and so split this up in a adap_unconfigured()
callback and a high-level configured() callback.
This also makes it easier to understand when the mutex is held: all
low-level adap_* callbacks are called with the mutex held. All other
callbacks are called without that mutex held.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: f1b5716430 ("media: cec: add optional adap_configured callback")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A potential deadlock was found by Zheng Zhang with a local syzkaller
instance.
The problem is that when a non-blocking CEC transmit is canceled by calling
cec_data_cancel, that in turn can call the high-level received() driver
callback, which can call cec_transmit_msg() to transmit a new message.
The cec_data_cancel() function is called with the adap->lock mutex held,
and cec_transmit_msg() tries to take that same lock.
The root cause is that the received() callback can either be used to pass
on a received message (and then adap->lock is not held), or to report a
canceled transmit (and then adap->lock is held).
This is confusing, so create a new low-level adap_nb_transmit_canceled
callback that reports back that a non-blocking transmit was canceled.
And the received() callback is only called when a message is received,
as was the case before commit f9d0ecbf56 ("media: cec: correctly pass
on reply results") complicated matters.
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: f9d0ecbf56 ("media: cec: correctly pass on reply results")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Document that sub-device notifiers are now registered using
v4l2_async_subdev_nf_init(). No documentation is changed as it seems that
sub-device notifiers were not documented apart from kernel-doc comments.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Set the v4l2_device already in async notifier init, so struct device
related to it will be available before the notifier is registered. This
requires separating notifier initialisation into two functions, one that
takes v4l2_device as its argument, v4l2_async_nf_init and
v4l2_async_subdev_nf_init, for sub-device notifiers. Registering the
notifier will use a single function, v4l2_async_nf_register.
This is done in order to make struct device available earlier, during
construction of the async connections, for sensible debug prints.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Initialise V4L2 async notifier and parse DT for async sub-devices later,
just before registering the notifier. This way the device can be made
available to the V4L2 async framework from the notifier init time onwards.
A subsequent patch will add struct v4l2_device as an argument to
v4l2_async_nf_init().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Initialise the V4L2 async notifier after registering the V4L2 device, just
before parsing DT for async sub-devices. This way the device can be made
available to the V4L2 async framework from the notifier init time onwards.
A subsequent patch will add struct v4l2_device as an argument to
v4l2_async_nf_init().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Initialise the V4L2 async notifier after registering the V4L2 device, just
before parsing DT for async sub-devices. This way the device can be made
available to the V4L2 async framework from the notifier init time onwards.
A subsequent patch will add struct v4l2_device as an argument to
v4l2_async_nf_init().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Initialise V4L2 async notifier and parse DT for async sub-devices later,
just before registering the notifier. This way the device can be made
available to the V4L2 async framework from the notifier init time onwards.
A subsequent patch will add struct v4l2_device as an argument to
v4l2_async_nf_init().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Register V4L2 device before the async notifier.This way the device can be
made available to the V4L2 async framework from the notifier init time
onwards. A subsequent patch will add struct v4l2_device as an argument to
v4l2_async_nf_init().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Register V4L2 device before the async notifier. This way the device can be
made available to the V4L2 async framework from the notifier init time
onwards. A subsequent patch will add struct v4l2_device as an argument to
v4l2_async_nf_init().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Register V4L2 device before initialising the notifier. This way the device
can be made available to the V4L2 async framework from the notifier init
time onwards. A subsequent patch will add struct v4l2_device as an
argument to v4l2_async_nf_init().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix and simplify error handling in pxa_camera probe, by moving devm_*()
functions early in the probe function and then tearing down what was set
up on error patch.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Return the two CSI-2 transmitters of adv748x to endpoint matching. This
should make the driver work again as expected.
Fixes: 1029939b37 ("media: v4l: async: Simplify async sub-device fwnode matching")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----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=gGNY
-----END PGP SIGNATURE-----
Merge tag '6.5-rc5-ksmbd-server' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Two ksmbd server fixes, both also for stable:
- improve buffer validation when multiple EAs returned
- missing check for command payload size"
* tag '6.5-rc5-ksmbd-server' of git://git.samba.org/ksmbd:
ksmbd: fix wrong next length validation of ea buffer in smb2_set_ea()
ksmbd: validate command request size
Add a 200ms delay after sending a ctrl report to Quadro,
Octo, D5 Next and Aquaero to give them enough time to
process the request and save the data to memory. Otherwise,
under heavier userspace loads where multiple sysfs entries
are usually set in quick succession, a new ctrl report could
be requested from the device while it's still processing the
previous one and fail with -EPIPE. The delay is only applied
if two ctrl report operations are near each other in time.
Reported by a user on Github [1] and tested by both of us.
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/82
Fixes: 752b927951 ("hwmon: (aquacomputer_d5next) Add support for Aquacomputer Octo")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230807172004.456968-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
- Revert a patch that unconditionally resolved addresses to inlines in
callchains, something that was done before when DWARF mode was asked
for, but could as well be done when just frame pointers (the default)
was selected. This enriches the callchains with inlines but the way to
resolve it is gross right now, relying on addr2line, and even if we come
up with an efficient way of processing all the associated DWARF info for
a big file as vmlinux is, this has to be something people opt-in, as it
will still result in overheads, so revert it until we get this done in a
saner way.
- Update the x86 msr-index.h header with the kernel original, no change
in tooling output, just addresses a tools/perf build warning.
- Resolve a regression where special "tool events", such as
"duration_time" were being presented for all CPUs, when it only makes
sense to show it for the workload, that is, just once.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZNP/OAAKCRCyPKLppCJ+
J7cGAQDgNpsAqGk+/Xkk7lPcp8aJ7q+5oaxv8iaGhdblq7V52gD+L2t8sNPQYWE3
sy2QQ+9tsZiONfpdxknsduxoyfE+Vgs=
=CRYB
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Revert a patch that unconditionally resolved addresses to inlines in
callchains, something that was done before when DWARF mode was asked
for, but could as well be done when just frame pointers (the default)
was selected.
This enriches the callchains with inlines but the way to resolve it
is gross right now, relying on addr2line, and even if we come up with
an efficient way of processing all the associated DWARF info for a
big file as vmlinux is, this has to be something people opt-in, as it
will still result in overheads, so revert it until we get this done
in a saner way.
- Update the x86 msr-index.h header with the kernel original, no change
in tooling output, just addresses a tools/perf build warning.
- Resolve a regression where special "tool events", such as
"duration_time" were being presented for all CPUs, when it only
makes sense to show it for the workload, that is, just once.
* tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Don't display zero tool counts
tools arch x86: Sync the msr-index.h copy with the kernel sources
Revert "perf report: Append inlines to non-DWARF callchains"
Commit 16d7fd3cfa ("zonefs: use iomap for synchronous direct writes")
changes zonefs code from a self-built zone append BIO to using iomap for
synchronous direct writes. This change relies on iomap submit BIO
callback to change the write BIO built by iomap to a zone append BIO.
However, this change overlooked the fact that a write BIO may be very
large as it is split when issued. The change from a regular write to a
zone append operation for the built BIO can result in a block layer
warning as zone append BIO are not allowed to be split.
WARNING: CPU: 18 PID: 202210 at block/bio.c:1644 bio_split+0x288/0x350
Call Trace:
? __warn+0xc9/0x2b0
? bio_split+0x288/0x350
? report_bug+0x2e6/0x390
? handle_bug+0x41/0x80
? exc_invalid_op+0x13/0x40
? asm_exc_invalid_op+0x16/0x20
? bio_split+0x288/0x350
bio_split_rw+0x4bc/0x810
? __pfx_bio_split_rw+0x10/0x10
? lockdep_unlock+0xf2/0x250
__bio_split_to_limits+0x1d8/0x900
blk_mq_submit_bio+0x1cf/0x18a0
? __pfx_iov_iter_extract_pages+0x10/0x10
? __pfx_blk_mq_submit_bio+0x10/0x10
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? mark_held_locks+0x9e/0xe0
__submit_bio+0x1ea/0x290
? __pfx___submit_bio+0x10/0x10
? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
submit_bio_noacct_nocheck+0x675/0xa20
? __pfx_bio_iov_iter_get_pages+0x10/0x10
? __pfx_submit_bio_noacct_nocheck+0x10/0x10
iomap_dio_bio_iter+0x624/0x1280
__iomap_dio_rw+0xa22/0x18a0
? lock_is_held_type+0xe3/0x140
? __pfx___iomap_dio_rw+0x10/0x10
? lock_release+0x362/0x620
? zonefs_file_write_iter+0x74c/0xc80 [zonefs]
? down_write+0x13d/0x1e0
iomap_dio_rw+0xe/0x40
zonefs_file_write_iter+0x5ea/0xc80 [zonefs]
do_iter_readv_writev+0x18b/0x2c0
? __pfx_do_iter_readv_writev+0x10/0x10
? inode_security+0x54/0xf0
do_iter_write+0x13b/0x7c0
? lock_is_held_type+0xe3/0x140
vfs_writev+0x185/0x550
? __pfx_vfs_writev+0x10/0x10
? __handle_mm_fault+0x9bd/0x1c90
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? __up_read+0x1ea/0x720
? do_pwritev+0x136/0x1f0
do_pwritev+0x136/0x1f0
? __pfx_do_pwritev+0x10/0x10
? syscall_enter_from_user_mode+0x22/0x90
? lockdep_hardirqs_on+0x7d/0x100
do_syscall_64+0x58/0x80
This error depends on the hardware used, specifically on the max zone
append bytes and max_[hw_]sectors limits. Tests using AMD Epyc machines
that have low limits did not reveal this issue while runs on Intel Xeon
machines with larger limits trigger it.
Manually splitting the zone append BIO using bio_split_rw() can solve
this issue but also requires issuing the fragment BIOs synchronously
with submit_bio_wait(), to avoid potential reordering of the zone append
BIO fragments, which would lead to data corruption. That is, this
solution is not better than using regular write BIOs which are subject
to serialization using zone write locking at the IO scheduler level.
Given this, fix the issue by removing zone append support and using
regular write BIOs for synchronous direct writes. This allows preseving
the use of iomap and having identical synchronous and asynchronous
sequential file write path. Zone append support will be reintroduced
later through io_uring commands to ensure that the needed special
handling is done correctly.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 16d7fd3cfa ("zonefs: use iomap for synchronous direct writes")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
platform_get_resource_byname() and devm_ioremap_resource() can be
replaced by devm_platform_ioremap_resource_byname(), which can
simplify the code logic a bit, No functional change here.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230809081523.26196-1-zhangzekun11@huawei.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The Programmable Realtime Unit - Industrial Communication Subsystem
(PRU-ICSS) known as PRUSS, is a low-latency microcontroller subsystem
used for industrial networking and other hard real-time functions in
the TI K3 SoCs such as AM654x, AM64x.
AM654x-EVM, AM64xx-EVM, and iot2050 use the PRUSS driver.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20230808130131.3081482-1-danishanwar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
TSCADC nodes defined in the top-level AM64 SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and/or
device information.
Disable the TSCADC nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-14-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
TSCADC nodes defined in the top-level AM65 SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and/or
device information.
Disable the TSCADC nodes in the top-level dtsi files and only enable the
ones that are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-13-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
TSCADC nodes defined in the top-level J721e SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and/or
device information.
Disable the TSCADC nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-12-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
GPIO nodes defined in the top-level J7200 SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and
device information.
Disable the GPIO nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-11-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
GPIO nodes defined in the top-level J721s2 SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and
device information.
Disable the GPIO nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-10-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
GPIO nodes defined in the top-level J721e SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and
device information.
Disable the GPIO nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-9-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
OSPI nodes defined in the top-level AM64 SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and
device information.
As the attached OSPI device is only known about at the board integration
level, these nodes should only be enabled when provided with this
information.
Disable the OSPI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-8-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
OSPI nodes defined in the top-level J7200 SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and
device information.
As the attached OSPI device is only known about at the board integration
level, these nodes should only be enabled when provided with this
information.
Disable the OSPI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-7-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
OSPI nodes defined in the top-level J721e SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and
device information.
As the attached OSPI device is only known about at the board integration
level, these nodes should only be enabled when provided with this
information.
Disable the OSPI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-6-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
OSPI nodes defined in the top-level AM65x SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and
device information.
As the attached OSPI device is only known about at the board integration
level, these nodes should only be enabled when provided with this
information.
Disable the OSPI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-5-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
SDHCI nodes defined in the top-level J721s2 SoC dtsi files are incomplete
and will not be functional unless they are extended.
As the attached SD/eMMC is only known about at the board integration level,
these nodes should only be enabled when provided with this information.
Disable the SDHCI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-4-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
SDHCI nodes defined in the top-level J7200 SoC dtsi files are incomplete
and will not be functional unless they are extended.
As the attached SD/eMMC is only known about at the board integration level,
these nodes should only be enabled when provided with this information.
Disable the SDHCI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-3-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
SDHCI nodes defined in the top-level J721e SoC dtsi files are incomplete
and will not be functional unless they are extended.
As the attached SD/eMMC is only known about at the board integration level,
these nodes should only be enabled when provided with this information.
Disable the SDHCI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add a test case to check whether sockmap redirection works correctly
when data length returned by stream_parser is less than skb->len.
In addition, this test checks whether strp_done is called correctly.
The reason is that we returns skb->len - 1 from the stream_parser, so
the last byte in the skb will be held by strp->skb_head. Therefore,
if strp_done is not called to free strp->skb_head, we'll get a memleak
warning.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-5-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
BPF CI has reported the following failure:
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: ingress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1514: ingress: recv() err, errno=11
vsock_unix_redir_connectible:FAIL:1514
./test_progs:vsock_unix_redir_connectible:1518: ingress: vsock socket map failed, a != b
vsock_unix_redir_connectible:FAIL:1518
./test_progs:vsock_unix_redir_connectible:1525: ingress: want pass count 1, have 0
It’s because the recv(... MSG_DONTWAIT) syscall in the test case is
called before the queued work sk_psock_backlog() in the kernel finishes
executing. So the data to be read is still queued in psock->ingress_skb
and cannot be read by the user program. Therefore, the non-blocking
recv() reads nothing and reports an EAGAIN error.
So replace recv(... MSG_DONTWAIT) with xrecv_nonblock(), which calls
select() to wait for data to be readable or timeout before calls recv().
Fixes: d61bd8c1fd ("selftests/bpf: add a test case for vsock sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-4-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
strp_done is only called when psock->progs.stream_parser is not NULL,
but stream_parser was set to NULL by sk_psock_stop_strp(), called
by sk_psock_drop() earlier. So, strp_done can never be called.
Introduce SK_PSOCK_RX_ENABLED to mark whether there is strp on psock.
Change the condition for calling strp_done from judging whether
stream_parser is set to judging whether this flag is set. This flag is
only set once when strp_init() succeeds, and will never be cleared later.
Fixes: c0d95d3380 ("bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230804073740.194770-3-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
sock_map_del_link() operates on both SOCKMAP and SOCKHASH, although
both types have member named "progs", the offset of "progs" member in
these two types is different, so "progs" should be accessed with the
real map type.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230804073740.194770-2-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch fixes the interrupt range for wakeup and main domain gpio
interrupt routers. They were wrongly subtracted by 32 instead of
following what is defined in the interrupt map in the TRM (Table 9-35).
Link: http://www.ti.com/lit/pdf/spruj52
Fixes: 4664ebd834 ("arm64: dts: ti: Add initial support for J784S4 SoC")
Signed-off-by: Apelete Seketeli <aseketeli@baylibre.com>
Signed-off-by: Esteban Blanc <eblanc@baylibre.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20230810-tps6594-v6-4-2b2e2399e2ef@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add register range of ringacc cfg node to all k3 SoC dtsi files. This is
normally under Device Management firmware control but some entities like
bootloader have to access directly and thus required to be present in DT.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230809175932.2553156-3-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
RINGACC module on K3 SoCs have CFG register region which is usually
configured by a Device Management firmware. But certain entities such as
bootloader (like U-Boot) may have to access them directly. Describe this
region in the binding documentation for completeness of module
description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230809175932.2553156-2-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
After splitting wkup_pmx pin mux for J784S4 into four regions.
Pin mux offset for ADC nodes were not updated to align with new
regions, due to this while probing ADC driver out of range
error was seen.
Pin mux offsets for ADC nodes are corrected in this patch.
Fixes: 14462bd0b2 ("arm64: dts: ti: k3-j784s4: Fix wakeup pinmux range and pinctrl node offsets")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20230809050108.751164-1-u-kumar1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Fix a refcount underflow problem reported by syzbot that can happen
when a system is running out of memory. If xp_alloc_tx_descs() fails,
and it can only fail due to not having enough memory, then the error
path is triggered. In this error path, the refcount of the pool is
decremented as it has incremented before. However, the reference to
the pool in the socket was not nulled. This means that when the socket
is closed later, the socket teardown logic will think that there is a
pool attached to the socket and try to decrease the refcount again,
leading to a refcount underflow.
I chose this fix as it involved adding just a single line. Another
option would have been to move xp_get_pool() and the assignment of
xs->pool to after the if-statement and using xs_umem->pool instead of
xs->pool in the whole if-statement resulting in somewhat simpler code,
but this would have led to much more churn in the code base perhaps
making it harder to backport.
Fixes: ba3beec2ec ("xsk: Fix possible crash when multiple sockets are created")
Reported-by: syzbot+8ada0057e69293a05fd4@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230809142843.13944-1-magnus.karlsson@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The interrupt handler for HPD is useful only if a display is actually
supposed to be hotpluggable, as that manages the machinery to perform
cable (un)plug detection, debouncing and setup for re-training.
Since eDP panels are not supposed to be hotpluggable we can avoid
using the HPD interrupts altogether and rely on HPD polling only
for the suspend/resume case, saving us some spinlocking action and
the overhead of interrupts firing at every suspend/resume cycle,
achieving a faster (even if just slightly) display resume.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230725073234.55892-12-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
