The name "clock" is not allowed for nodes, use "clock-controller" to
remove the DTS check warning.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230802174521.236255-3-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
There are two nodes representing the same register space, this looks to
have been created by some merge or copy/paste error. Remove the second
instance of this node and move its children into the first instance.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230802174521.236255-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
USB0 is interfaced with a Type-C DRP connector and is managed via a
USB PD controller. Add support for the Type-C port with dual data
and power sink role.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230725103651.1612-1-r-gunasekaran@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add Verdin CAN_2 (TI AM62 MCU_MCAN0) and enable it on the Yavia,
Dahlia and Verdin Development board.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230802073635.11290-3-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
On AM62x there are no hardware interrupts routed to A53 GIC
interrupt controller for MCU MCAN IPs, so MCU MCAN nodes were
omitted from MCU dtsi.
Timer polling was introduced in commits [1][2] so now add MCU MCAN nodes
to the MCU dtsi for the Cortex A53.
[1] commit b382380c0d ("can: m_can: Add hrtimer to generate software interrupt")
[2] commit bb410c03b9 ("dt-bindings: net: can: Remove interrupt properties for MCAN")
[fd: fixed labels to match datasheet numbering, revised commit message,
fixed reg/reg-names order]
Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230802073635.11290-2-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
MCP4728 is a 12-bit quad channel DAC with I2C interface.
support for:
* per-channel gain
* per-channel power state
* per-channel power down mode control
* per-channel vref selection internal/vdd
* store current state to on-chip EEPROM
Signed-off-by: Andrea Collamati <andrea.collamati@gmail.com>
Link: https://lore.kernel.org/r/a0933003ed3c855f9d80d6ce0a40add2b6f0ba36.1691066050.git.andrea.collamati@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add regulators for the VCC supplies of the admv1013.
The patch aims to align the implementation with the current admv1014
driver where all the VCC supplies are handled as regulators.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20230731094455.26742-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add bindings for the VCC regulators of the ADMV1013 microware
upconverter.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230731094455.26742-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230802120915.25631-1-aboutphysycs@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix up outstanding pingroup node names to be compliant with the
upcoming pinctrl-single schema.
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230802040347.2264339-1-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The module_mcb_driver() will set "THIS_MODULE" to driver.owner when
register a mcb_driver, so it is redundant initialization to set
driver.owner in men_z188_driver statement. Remove it for clean code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230804100938.100435-1-lizetao1@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Using CR_BEST_AVAIL_LEN only make sense for regular files, as for
non-regular files we never normalize the allocation request length i.e.
goal len is same as original length (ac_g_ex.fe_len == ac_o_ex.fe_len).
Hence there is no scope of trimming the goal length to make it
satisfy original request len. Thus this patch avoids using
CR_BEST_AVAIL_LEN criteria for non-regular files request.
Cc: stable@kernel.org
Fixes: 33122aa930f1 ("ext4: Add allocation criteria 1.5 (CR1_5)")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Tested-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/2a694c748ff8b8c4b416995a24f06f07b55047a8.1689516047.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the filename casefolding fails, we'll be leaking memory from the
fscrypt_name struct, namely from the 'crypto_buf.name' member.
Make sure we free it in the error path on both ext4_fname_setup_filename()
and ext4_fname_prepare_lookup() functions.
Cc: stable@kernel.org
Fixes: 1ae98e295f ("ext4: optimize match for casefolded encrypted dirs")
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230803091713.13239-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ the case for `strncpy`!
It should be noted that the destination buffer is zero-initialized and
had a max length of `sizeof(dest) - 1`. There is likely _not_ a bug
present in the current implementation. However, by switching to
`strscpy` we get the benefit of no longer needing the `- 1`'s from the
string copy invocations on top of `strscpy` being a safer interface all
together.
[1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
[2]: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
These duplicate defines should automatically be picked up from kernel
headers. Use KHDR_INCLUDES to add kernel header files.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Message-Id: <20230805073809.1753462-4-usama.anjum@collabora.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add the Non-ISO MC client for the Tegra234 GPU to the
tegra234_mc_clients table.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://lore.kernel.org/r/20230801121023.27841-1-sumitg@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The driver fails to link when CONFIG_POWER_SUPPLY is disabled:
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_psy_get_prop':
extcon-intel-cht-wc.c:(.text+0x15ccda7): undefined reference to `power_supply_get_drvdata'
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_pwrsrc_event':
extcon-intel-cht-wc.c:(.text+0x15cd3e9): undefined reference to `power_supply_changed'
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_probe':
extcon-intel-cht-wc.c:(.text+0x15cd596): undefined reference to `devm_power_supply_register'
It should be possible to change the driver to not require this at
compile time and still provide other functions, but adding a hard
Kconfig dependency does not seem to have any practical downsides
and is simpler since the option is normally enabled anyway.
Fixes: 66e31186cd ("extcon: intel-cht-wc: Add support for registering a power_supply class-device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This contains a fix for a potential issue on some Qualcomm SoCs where
bit-masks should have been used to configure the Bus Clock Manager
hardware, instead of bandwidth units.
- interconnect: qcom: Add support for mask-based BCMs
- interconnect: qcom: sm8450: add enable_mask for bcm nodes
- interconnect: qcom: sm8550: add enable_mask for bcm nodes
- interconnect: qcom: sa8775p: add enable_mask for bcm nodes
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=U0AW
-----END PGP SIGNATURE-----
Merge tag 'icc-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fixes for v6.5-rc
This contains a fix for a potential issue on some Qualcomm SoCs where
bit-masks should have been used to configure the Bus Clock Manager
hardware, instead of bandwidth units.
- interconnect: qcom: Add support for mask-based BCMs
- interconnect: qcom: sm8450: add enable_mask for bcm nodes
- interconnect: qcom: sm8550: add enable_mask for bcm nodes
- interconnect: qcom: sa8775p: add enable_mask for bcm nodes
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: sa8775p: add enable_mask for bcm nodes
interconnect: qcom: sm8550: add enable_mask for bcm nodes
interconnect: qcom: sm8450: add enable_mask for bcm nodes
interconnect: qcom: Add support for mask-based BCMs
The following two commits added the same thing for tmpfs:
* commit 2b4db79618 ("tmpfs: generate random sb->s_uuid")
* commit 59cda49ecf ("shmem: allow reporting fanotify events with file handles on tmpfs")
Having fsid allows using fanotify, which is especially handy for cgroups,
where one might be interested in knowing when they are created or removed.
Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230731184731.64568-1-ivan@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some randconfig builds, kernfs ends up being disabled, so there is no prototype
for kernfs_generic_poll()
In file included from kernel/sched/build_utility.c:97:
kernel/sched/psi.c:1479:3: error: implicit declaration of function 'kernfs_generic_poll' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
kernfs_generic_poll(t->of, wait);
^
Add a stub helper for it, as we have it for other kernfs functions.
Fixes: aff037078e ("sched/psi: use kernfs polling functions for PSI trigger polling")
Fixes: 147e1a97c4 ("fs: kernfs: add poll file operation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20230724121823.1357562-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the pseudo_lock_class structure to be declared at build
time placing it into read-only memory, instead of having to be
dynamically allocated at boot time.
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20230620144431.583290-6-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the msr_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620144431.583290-5-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the cpuid_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620144431.583290-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620183141.681353-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Stefan Achatz <erazor_de@users.sourceforge.net>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620183141.681353-3-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Booting the kernel with "maxcpus=1" is a common technique for CPU
partitioning and isolation. It delays the CPU bringup process until
when the bootup scripts are ready to bring CPUs online by writing 1 to
/sys/device/system/cpu/cpu<X>/online. However, it was found that not
all the CPUs were online after bootup. The collection of offline CPUs
are different after every reboot.
Further investigation reveals that some "online" write operations
fail with an -EBUSY error. This error is returned when CPU hotplug is
temporiarly disabled when cpu_hotplug_disable() is called.
During bootup, the main caller of cpu_hotplug_disable() is
pci_call_probe() for PCI device initialization. By measuring the times
spent with cpu_hotplug_disabled set in a typical 2-socket server, most
of them last less than 10ms. However, there are a few that can last
hundreds of ms. Note that the cpu_hotplug_disabled period of different
devices can overlap leading to longer cpu_hotplug_disabled hold time.
Since the CPU hotplug disable condition is transient and it is not
that easy to modify all the existing bootup scripts to handle this
condition, the kernel can help by retrying the online operation when
an -EBUSY error is returned. This patch retries the online operation
in cpu_subsys_online() when an -EBUSY error is returned for up to 5
times after an exponentially increasing delay that can last a total of
at least 620ms of waiting time by calling msleep().
With this patch in place, booting up the patched kernel with "maxcpus=1"
does not leave any CPU in an offline state in 10 reboot attempts.
Reported-by: Vishal Agrawal <vagrawal@redhat.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20230724143826.3996163-1-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tweak some of the rule text to make things more straight forward, with
the goal to stick closely to the intend of the old text:
* put the "it or equivalent fix must be upstream" rule at the top, as
it's one of the most important ones that at the same time often seems
to be missed by developers.
* "It must fix only one thing" was dropped, as that is almost always a
thing that needs to be handled earlier when the change is mainlined.
Furthermore, this is already indirectly covered by the "Separate your
changes" section in Documentation/process/submitting-patches.rst which
the rules already point to.
* six other rules are in the end one rule with clarifications; structure
the text accordingly to make it a lot easier to follow and understand
the intend.
* drop the 'In short, something critical' from one of those notes: it
contradicts the "real bug that bothers people" aspect somewhat and does
not really add anything
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Sasha Levin <sashal@kernel.org>
CC: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/f83e812879caa978a51a1a7cae7c359f29fc093c.1689056247.git.linux@leemhuis.info
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document how to delay backporting or send a note to the stable team
using shell-style inline comments attached to stable tags.
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Sasha Levin <sashal@kernel.org>
CC: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/bf1489b40ff358b7cb4f7d8cc73d5c7c3c143471.1689056247.git.linux@leemhuis.info
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-integrity@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20230620144642.584926-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are too many "(type > KOBJ_NS_TYPE_NONE) && (type < KOBJ_NS_TYPES)"
and "(type <= KOBJ_NS_TYPE_NONE) || (type >= KOBJ_NS_TYPES)", add helper
kobj_ns_type_is_valid() to eliminate duplicate code and improve
readability.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20230726062508.950-1-thunder.leizhen@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When test_remove is enabled really_probe() does not properly pair
dma_configure() with dma_remove(), it will end up calling dma_configure()
twice. This corrupts the owner_cnt and renders the group unusable with
VFIO/etc.
Add the missing cleanup before going back to re_probe.
Fixes: 25f3bcfc54 ("driver core: Add dma_cleanup callback in bus_type")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Closes: https://lore.kernel.org/all/6472f254-c3c4-8610-4a37-8d9dfdd54ce8@huawei.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v2-4deed94e283e+40948-really_probe_dma_cleanup_jgg@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The test_platform_device_register_node() function should return error
pointers instead of NULL. That is what the callers are expecting.
Fixes: 57ea974fb8 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/1e11ed19-e1f6-43d8-b352-474134b7c008@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dev_err_probe() belongs to the printing API, hence
move the definition from device.h to dev_printk.h.
There is no change to the callers at all, since:
1) implementation is located in the same core.c;
2) dev_printk.h is guaranteed to be included by device.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20230721131309.16821-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct kobject' from 256 to 244 bytes.
This structure is often included in some other structures. So these other
structures will also benefit from this 8 bytes saving.
This is especially nice for structure like 'cma_kobject' or 'class_dir'
that are now 256 bytes long. When they are kzalloc()'ed, 256 bytes are
allocated, instead of 512.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6c7d1e3005dbec5483bdb9b7b60071175bf7bf70.1688811201.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a client roamed back to a node before it got time to destroy the
pending local entry (i.e. within the same originator interval) the old
global one is directly removed from hash table and left as such.
But because this entry had an extra reference taken at lookup (i.e using
batadv_tt_global_hash_find) there is no way its memory will be reclaimed
at any time causing the following memory leak:
unreferenced object 0xffff0000073c8000 (size 18560):
comm "softirq", pid 0, jiffies 4294907738 (age 228.644s)
hex dump (first 32 bytes):
06 31 ac 12 c7 7a 05 00 01 00 00 00 00 00 00 00 .1...z..........
2c ad be 08 00 80 ff ff 6c b6 be 08 00 80 ff ff ,.......l.......
backtrace:
[<00000000ee6e0ffa>] kmem_cache_alloc+0x1b4/0x300
[<000000000ff2fdbc>] batadv_tt_global_add+0x700/0xe20
[<00000000443897c7>] _batadv_tt_update_changes+0x21c/0x790
[<000000005dd90463>] batadv_tt_update_changes+0x3c/0x110
[<00000000a2d7fc57>] batadv_tt_tvlv_unicast_handler_v1+0xafc/0xe10
[<0000000011793f2a>] batadv_tvlv_containers_process+0x168/0x2b0
[<00000000b7cbe2ef>] batadv_recv_unicast_tvlv+0xec/0x1f4
[<0000000042aef1d8>] batadv_batman_skb_recv+0x25c/0x3a0
[<00000000bbd8b0a2>] __netif_receive_skb_core.isra.0+0x7a8/0xe90
[<000000004033d428>] __netif_receive_skb_one_core+0x64/0x74
[<000000000f39a009>] __netif_receive_skb+0x48/0xe0
[<00000000f2cd8888>] process_backlog+0x174/0x344
[<00000000507d6564>] __napi_poll+0x58/0x1f4
[<00000000b64ef9eb>] net_rx_action+0x504/0x590
[<00000000056fa5e4>] _stext+0x1b8/0x418
[<00000000878879d6>] run_ksoftirqd+0x74/0xa4
unreferenced object 0xffff00000bae1a80 (size 56):
comm "softirq", pid 0, jiffies 4294910888 (age 216.092s)
hex dump (first 32 bytes):
00 78 b1 0b 00 00 ff ff 0d 50 00 00 00 00 00 00 .x.......P......
00 00 00 00 00 00 00 00 50 c8 3c 07 00 00 ff ff ........P.<.....
backtrace:
[<00000000ee6e0ffa>] kmem_cache_alloc+0x1b4/0x300
[<00000000d9aaa49e>] batadv_tt_global_add+0x53c/0xe20
[<00000000443897c7>] _batadv_tt_update_changes+0x21c/0x790
[<000000005dd90463>] batadv_tt_update_changes+0x3c/0x110
[<00000000a2d7fc57>] batadv_tt_tvlv_unicast_handler_v1+0xafc/0xe10
[<0000000011793f2a>] batadv_tvlv_containers_process+0x168/0x2b0
[<00000000b7cbe2ef>] batadv_recv_unicast_tvlv+0xec/0x1f4
[<0000000042aef1d8>] batadv_batman_skb_recv+0x25c/0x3a0
[<00000000bbd8b0a2>] __netif_receive_skb_core.isra.0+0x7a8/0xe90
[<000000004033d428>] __netif_receive_skb_one_core+0x64/0x74
[<000000000f39a009>] __netif_receive_skb+0x48/0xe0
[<00000000f2cd8888>] process_backlog+0x174/0x344
[<00000000507d6564>] __napi_poll+0x58/0x1f4
[<00000000b64ef9eb>] net_rx_action+0x504/0x590
[<00000000056fa5e4>] _stext+0x1b8/0x418
[<00000000878879d6>] run_ksoftirqd+0x74/0xa4
Releasing the extra reference from batadv_tt_global_hash_find even at
roam back when batadv_tt_global_free is called fixes this memory leak.
Cc: stable@vger.kernel.org
Fixes: 068ee6e204 ("batman-adv: roaming handling mechanism redesign")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by; Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Commit 0788257aee ("hwrng: Explicitly include correct DT includes")
removed an implicit include of io.h. On most architectures, there's
still an implicit include of it, but not on s390. Enabling COMPILE_TEST
in commit 1ce1cd8208 ("hwrng: Enable COMPILE_TEST for more drivers")
exposed this.
Fixes: 0788257aee ("hwrng: Explicitly include correct DT includes")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308042049.8R2tNRoo-lkp@intel.com/
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Change a usleep() to udelay() to avoid scheduling while atomic
in the Amlogic PLL code
- Revert a patch to the Mediatek MT8183 driver that caused an
out-of-bounds write
- Return the right error value when devm_of_iomap() fails in
imx93_clocks_probe()
- Constrain the Kconfig for the fixed mmio clk so that it depends on
HAS_IOMEM and can't be compiled on architectures such as s390
-----BEGIN PGP SIGNATURE-----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=eROl
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes for some SoC clk drivers:
- Change a usleep() to udelay() to avoid scheduling while atomic in
the Amlogic PLL code
- Revert a patch to the Mediatek MT8183 driver that caused an
out-of-bounds write
- Return the right error value when devm_of_iomap() fails in
imx93_clocks_probe()
- Constrain the Kconfig for the fixed mmio clk so that it depends on
HAS_IOMEM and can't be compiled on architectures such as s390"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM
clk: imx93: Propagate correct error in imx93_clocks_probe()
clk: mediatek: mt8183: Add back SSPM related clocks
clk: meson: change usleep_range() to udelay() for atomic context
The first pull request for v6.6 and only driver patches this time.
Nothing special really standing out, it has been quiet most likely due
to vacations.
Major changes:
rtl8xxxu
* enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU), RTL8192EU and RTL8723BU
mwifiex
* allow moving to a different namespace
mt76
* preparation for mt7925 support
* mt7981 support
ath12k
* Extremely High Throughput (EHT) PHY support for Wi-Fi 7
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmTM6gkRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuuAggAjRQi7Vjsfr+GlZ+g/y/vf+ircw8YjKgy
wJqnQ0fnJ4rpyxqVFjMr+ocuOrdBufTSs/W4fqOBbbg9oimsgg+vxIQA8GmQIUVQ
ZQVWQHVqPLQ6NVp/YZJnt9seeCewGHW6UZxG9k0MqR1RJn+KinmSjWKRo1D56niL
rJQAK0FWrVqkj5nt9lKRJLMGxX0k/ftrdZgHanUOVCNYi9Ukx0jXSbqSMftTk7xz
r3jtuY5zAV+2GXoMIbW4ogBks4Yx06XzVycByzj+dYt5E3VBdDFX+mXlsw9vnjbv
whVzsuMnYBu6CCFlKDPdGsmrzZA0GrLCRZE9uw7yhwZZ+qKkQZ8kNw==
=5r3T
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.6
The first pull request for v6.6 and only driver patches this time.
Nothing special really standing out, it has been quiet most likely due
to vacations.
Major changes:
rtl8xxxu
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
mwifiex
- allow moving to a different namespace
mt76
- preparation for mt7925 support
- mt7981 support
ath12k
- Extremely High Throughput (EHT) PHY support for Wi-Fi 7
* tag 'wireless-next-2023-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (172 commits)
wifi: rtw89: return failure if needed firmware elements are not recognized
wifi: rtw89: add to parse firmware elements of BB and RF tables
wifi: rtw89: introduce infrastructure of firmware elements
wifi: rtw89: add firmware suit for BB MCU 0/1
wifi: rtw89: add firmware parser for v1 format
wifi: rtw89: introduce v1 format of firmware header
wifi: rtw89: support firmware log with formatted text
wifi: rtw89: recognize log format from firmware file
wifi: ath12k: avoid deadlock by change ieee80211_queue_work for regd_update_work
wifi: ath12k: add handler for scan event WMI_SCAN_EVENT_DEQUEUED
wifi: ath12k: relax list iteration in ath12k_mac_vif_unref()
wifi: ath12k: configure puncturing bitmap
wifi: ath12k: parse WMI service ready ext2 event
wifi: ath12k: add MLO header in peer association
wifi: ath12k: peer assoc for 320 MHz
wifi: ath12k: add WMI support for EHT peer
wifi: ath12k: prepare EHT peer assoc parameters
wifi: ath12k: add EHT PHY modes
wifi: ath12k: propagate EHT capabilities to userspace
wifi: ath12k: WMI support to process EHT capabilities
...
====================
Link: https://lore.kernel.org/r/87msz7j942.fsf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
tcp: Disable header prediction for MD5.
The 1st patch disable header prediction for MD5 flow and the 2nd
patch updates the stale comment in tcp_parse_options().
====================
Link: https://lore.kernel.org/r/20230803224552.69398-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 9ea88a1530 ("tcp: md5: check md5 signature without socket
lock"), the MD5 option is checked in tcp_v[46]_rcv().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803224552.69398-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP socket saves the minimum required header length in tcp_header_len
of struct tcp_sock, and later the value is used in __tcp_fast_path_on()
to generate a part of TCP header in tcp_sock(sk)->pred_flags.
In tcp_rcv_established(), if the incoming packet has the same pattern
with pred_flags, we enter the fast path and skip full option parsing.
The MD5 option is parsed in tcp_v[46]_rcv(), so we need not parse it
again later in tcp_rcv_established() unless other options exist. We
add TCPOLEN_MD5SIG_ALIGNED to tcp_header_len in two paths to avoid the
slow path.
For passive open connections with MD5, we add TCPOLEN_MD5SIG_ALIGNED
to tcp_header_len in tcp_create_openreq_child() after 3WHS.
On the other hand, we do it in tcp_connect_init() for active open
connections. However, the value is overwritten while processing
SYN+ACK or crossed SYN in tcp_rcv_synsent_state_process().
These two cases will have the wrong value in pred_flags and never go
into the fast path.
We could update tcp_header_len in tcp_rcv_synsent_state_process(), but
a test with slightly modified netperf which uses MD5 for each flow shows
that the slow path is actually a bit faster than the fast path.
On c5.4xlarge EC2 instance (16 vCPU, 32 GiB mem)
$ for i in {1..10}; do
./super_netperf $(nproc) -H localhost -l 10 -- -m 256 -M 256;
done
Avg of 10
* 36e68eadd3 : 10.376 Gbps
* all fast path : 10.374 Gbps (patch v2, See Link)
* all slow path : 10.394 Gbps
The header prediction is not worth adding complexity for MD5, so let's
disable it for MD5.
Link: https://lore.kernel.org/netdev/20230803042214.38309-1-kuniyu@amazon.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803224552.69398-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket.
Same thing in do_dccp_getsockopt().
Add READ_ONCE()/WRITE_ONCE() annotations,
and change dccp_sendmsg() to check again dccps_mss_cache
after socket is locked.
Fixes: 7c657876b6 ("[DCCP]: Initial implementation")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803163021.2958262-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: more fixes for v6.5
Here is a new batch of fixes related to MPTCP for v6.5 and older.
Patches 1 and 2 fix issues with MPTCP Join selftest when manually
launched with '-i' parameter to use 'ip mptcp' tool instead of the
dedicated one (pm_nl_ctl). The issues have been there since v5.18.
Thank you Andrea for your first contributions to MPTCP code in the
upstream kernel!
Patch 3 avoids corrupting the data stream when trying to reset
connections that have fallen back to TCP. This can happen from v6.1.
Patch 4 fixes a race when doing a disconnect() and an accept() in
parallel on a listener socket. The issue only happens in rare cases if
the user is really unlucky since a fix that landed in v6.3 but
backported up to v6.1.
====================
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-0-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
