ERROR: that open brace { should be on the previous line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: "foo* bar" should be "foo *bar"
ERROR: spaces required around that '=' (ctx:VxW)
ERROR: space prohibited before that close parenthesis ')'
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: spaces required around that '=' (ctx:VxW)
ERROR: spaces required around that '>=' (ctx:WxV)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following function definitions go on the next line
ERROR: space required before the open parenthesis '('
ERROR: space required after that ',' (ctx:VxV)
ERROR: spaces required around that '=' (ctx:VxW)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ERROR: space required before the open parenthesis '('
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following checkpatch errors:
ERROR: do not use assignment in if condition
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ERROR: that open brace { should be on the previous line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ERROR: that open brace { should be on the previous line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ERROR: else should follow close brace '}'
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=Y/po
-----END PGP SIGNATURE-----
Merge tag 'for-6.5-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix accounting of global block reserve size when block group tree is
enabled
- the async discard has been enabled in 6.2 unconditionally, but for
zoned mode it does not make that much sense to do it asynchronously
as the zones are reset as needed
- error handling and proper error value propagation fixes
* tag 'for-6.5-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: check for commit error at btrfs_attach_transaction_barrier()
btrfs: check if the transaction was aborted at btrfs_wait_for_commit()
btrfs: remove BUG_ON()'s in add_new_free_space()
btrfs: account block group tree when calculating global reserve size
btrfs: zoned: do not enable async discard
A call to memblock_free() or memblock_phys_free() issued after memblock
data is discarded will result in use after free in
memblock_isolate_range().
When CONFIG_KASAN is enabled, this will cause a panic early in boot.
Without CONFIG_KASAN, there is a chance that memblock_isolate_range() might
scribble on memory that is now in use by somebody else.
Avoid those issues by making sure that memblock_discard points
memblock.reserved.regions back at the static buffer.
If memblock_free() or memblock_phys_free() is called after memblock memory
is discarded, that will print a warning in memblock_remove_region().
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmTB94cQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kesHB/4rNvGFGEI8LFxooARLt8glcv0Hn7oJ+z3L
Xyczw1ZkglT3DEYsoY78bSriddWPqrV3wWkr+p2NYXPBJWgQZ6t3DRZviqzXcj2l
Ew2XwLAfT6Vay1eqEFfJJvkGg27QLhnmJPnjDzCWweiXUaR5xOESwKCBmZBWeXUU
t5EFJMIXLVEoBDLGW5kk+Q4RZDqhU/sJWDqf4ciWQ5vDS8OFTr56hfth7T8XoMxm
BPlC21+cEJUWrbb1gAJUMbIERTzvYg8odZqSAESlHyNyDEtYjyLce5W6HA6zHK+H
2gqiti+Pd1OyHbJUc1lN7iRTE8FJ7DQcBr6H9sk81Po5af02Ky7m
=FRx8
-----END PGP SIGNATURE-----
Merge tag 'fixes-2023-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"A call to memblock_free() or memblock_phys_free() issued after
memblock data is discarded will result in use after free in
memblock_isolate_range().
Avoid those issues by making sure that memblock_discard points
memblock.reserved.regions back at the static buffer"
* tag 'fixes-2023-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm,memblock: reset memblock.reserved to system init state to prevent UAF
As esw_offloads_load/unload_rep() are used outside eswitch.c it is nicer
for them to have "mlx5_" prefix. Add it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5_eswitch_load/unload_vport()() functions are not used
outside of eswitch.c. Make them static.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5_esw_offloads_rep_load/unload() functions are not used
outside of eswitch_offloads.c. Make them static.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
It is guaranteed that the devlink rate leaf is created during init paths.
No need to check during cleanup. Remove the checks.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
vport->enabled is always set for a vport for which a devlink port is
registered, therefore the checks in the ops are pointless.
Remove those.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Get and set flow classification filters are used in a single file.
Hence, make them static.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Flow table and priority detection is same for IP user flows and other L4
flows. Hence, use same code for all these flow types.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Command stats is an array with more than 2K entries, which amounts to
~180KB. This is way more than actually needed, as only ~190 entries
are being used.
Therefore, replace the array with xarray.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is no need to destroy and allocate cmd SW structs during reload,
this is time consuming for no reason.
Hence, split mlx5_cmd_init() to probe and reload routines.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Downstream patch will split mlx5_cmd_init() to probe and reload
routines. As a preparation, organize mlx5_cmd struct so that any
field that will be used in the reload routine are grouped at new
nested struct.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
New features could use the devcom interface but not necessarily
the lag feature although for vport managers and ECPF
still check for lag support.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Register devcom devices with switch id instead of guid.
Devcom interface is used to sync between ports in the eswitch,
e.g. Adding miss rules between the ports.
New eswitch devices could have the same guid but a different
switch id so its more correct to group according to switch id
which is the identifier if the ports are on the same eswitch.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Update devcom infrastructure to be more generic, without
depending on max supported ports definition or a device guid,
and also more encapsulated so callers don't need to pass
the register devcom component id per event call.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Move shared function to check lag is supported to lag header file.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
lock_vma_under_rcu() tries to guarantee that __anon_vma_prepare() can't
be called in the VMA-locked page fault path by ensuring that
vma->anon_vma is set.
However, this check happens before the VMA is locked, which means a
concurrent move_vma() can concurrently call unlink_anon_vmas(), which
disassociates the VMA's anon_vma.
This means we can get UAF in the following scenario:
THREAD 1 THREAD 2
======== ========
<page fault>
lock_vma_under_rcu()
rcu_read_lock()
mas_walk()
check vma->anon_vma
mremap() syscall
move_vma()
vma_start_write()
unlink_anon_vmas()
<syscall end>
handle_mm_fault()
__handle_mm_fault()
handle_pte_fault()
do_pte_missing()
do_anonymous_page()
anon_vma_prepare()
__anon_vma_prepare()
find_mergeable_anon_vma()
mas_walk() [looks up VMA X]
munmap() syscall (deletes VMA X)
reusable_anon_vma() [called on freed VMA X]
This is a security bug if you can hit it, although an attacker would
have to win two races at once where the first race window is only a few
instructions wide.
This patch is based on some previous discussion with Linus Torvalds on
the security list.
Cc: stable@vger.kernel.org
Fixes: 5e31275cc9 ("mm: add per-VMA lock and helper functions to control it")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add code to rebuild the LAG resources when rebuilding the state of the
interface after a reset.
Also added in a function for building per-queue information into the buffer
used to configure VF queues for LAG fail-over. This improves code reuse.
Due to differences in timing per interface for recovering from a reset, add
in the ability to retry on non-local dependencies where needed.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
To support SRIOV LAG, the driver cannot allow changes to an interface's DCB
configuration when in a bond. This would break the ability to modify
interfaces Tx scheduling for fail-over interfaces.
Block kernel generated DCB config events when in a bond.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement checks on what interfaces are eligible for supporting SRIOV VFs
when a member of an aggregate interface.
Implement unwind path for interfaces that become ineligible.
checks for the SRIOV LAG feature bit wrap most of the functional code for
manipulating resources that apply to this feature. Utilize this bit
to track compliant aggregates. Also flag any new entries into the
aggregate as not supporting SRIOV LAG for the time they are in the
non-compliant aggregate.
Once an aggregate has been flagged as non-compliant, only unpopulating the
aggregate and re-populating it will return SRIOV LAG functionality.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Code for supporting removal of the PF driver (NETDEV_UNREGISTER) events for
both when the bond has the primary interface as active and when failed over
to thew secondary interface.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add in the functions that will allow a VF created on the primary interface
of a bond to "fail-over" to another PF interface in the bond and continue
to Tx and Rx.
Add in an ordered take-down path for the bonded interface.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add in the function framework for the processing of LAG events. Also add
in helper function to perform common tasks.
Add the basis of the process of linking a lower netdev to an upper netdev.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The event handler for LAG will create a work item to place on the ordered
workqueue to be processed.
Add in defines for training packets and new recipes to be used by the
switching block of the HW for LAG packet steering.
Update the ice_lag struct to reflect the new processing methodology.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add defines needed for interaction with the FW admin queue interface
in relation to supporting LAG and SRIOV VFs interacting.
Add code, or make non-static previously static functions, to access
the new and changed admin queue calls for LAG.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add the defines, fields, and detection code for FW support of LAG for
SRIOV. Also exposes some previously static functions to allow access
in the lag code.
Clean up code that is unused or not needed for LAG support. Also add
an ordered workqueue for processing LAG events.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_alloc_lan_q_ctx function allocates the queue context array for a
given traffic class. This function uses devm_kcalloc which will
zero-allocate the structure. Thus, prior to any queue being setup by
ice_ena_vsi_txq, the q_ctx structure will have a q_handle of 0 and a q_teid
of 0. These are potentially valid values.
Modify the ice_alloc_lan_q_ctx function to initialize every member of the
q_ctx array to have invalid values. Modify ice_dis_vsi_txq to ensure that
it assigns q_teid to an invalid value when it assigns q_handle to the
invalid value as well.
This will allow other code to check whether the queue context is currently
valid before operating on it.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Prefer struct_size_t() over struct_size() when no pointer instance
of the structure type is present.
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Link: https://lore.kernel.org/r/ZKBfoqSl61jfpO2r@work
Signed-off-by: Kees Cook <keescook@chromium.org>
USB connector bindings is complete, thus no additional properties should
be allowed. Add missing 'reg' property and change additionalProperties
to false, so the schema will check for anything unexpected. This also
allows to drop the 'reg' from other bindings referencing the
usb-connector.yaml and make it required.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230725102325.76336-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The nla_for_each_nested parsing in function bpf_sk_storage_diag_alloc
does not check the length of the nested attribute. This can lead to an
out-of-attribute read and allow a malformed nlattr (e.g., length 0) to
be viewed as a 4 byte integer.
This patch adds an additional check when the nlattr is getting counted.
This makes sure the latter nla_get_u32 can access the attributes with
the correct length.
Fixes: 1ed4d92458 ("bpf: INET_DIAG support in bpf_sk_storage")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230725023330.422856-1-linma@zju.edu.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230706175804.2249018-1-azeemshaikh38@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
# diff --git a/drivers/eisa/eisa-bus.c b/drivers/eisa/eisa-bus.c
# index 713582cc27d1..33f0ba11c6ad 100644
# --- a/drivers/eisa/eisa-bus.c
# +++ b/drivers/eisa/eisa-bus.c
# @@ -60,7 +60,7 @@ static void __init eisa_name_device(struct eisa_device *edev)
# int i;
# for (i = 0; i < EISA_INFOS; i++) {
# if (!strcmp(edev->id.sig, eisa_table[i].id.sig)) {
# - strlcpy(edev->pretty_name,
# + strscpy(edev->pretty_name,
# eisa_table[i].name,
# sizeof(edev->pretty_name));
# return;
when kmalloc() fail to allocate memory in kasprintf(), name
or full_name will be NULL, strcmp() will cause
null pointer dereference.
Fixes: 0d638a07d3 ("of: Convert to using %pOF instead of full_name")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230727080246.519539-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
./drivers/soc/tegra/cbb/tegra-cbb.c:130:3-10: line 130 is redundant because platform_get_irq() already prints an error.
./drivers/soc/tegra/cbb/tegra-cbb.c:140:2-9: line 140 is redundant because platform_get_irq() already prints an error.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4879
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The MX8M CM7 boot via SMC call is problematic, since not all versions
of ATF support this interface. Extend the MMIO support so it can boot
the CM7 on MX8MN/MP instead and discern the two alternatives using DT
compatible strings.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230724222418.163220-2-marex@denx.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The MX8M CM7 boot via SMC call is problematic, since not all versions
of ATF support this interface. Document MMIO support used to boot the
CM7 on MX8MN/MP instead and discern MMIO interface using DT compatible
string. Document GPR register syscon phandle which is required by the
MMIO interface too.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230724222418.163220-1-marex@denx.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
