The debug UART doesn't support DMA and the DT bindings prohibit the use
of the dmas and dma-names properties for it, so remove them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
It turns out that these devices can get quite hot to the touch with the
standard cooling configuration, so add another trip point at 35°C along
with a cooling map to help keep the system reasonably cool at very low
system load.
Reviewed-by: Yi-Wei Wang <yiweiw@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The PCI nodes for Jetson Orin NX are already defined at the carrier
board level, so the duplicates can be dropped at the platform level.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add audio support for the NVIDIA IGX Orin development kit having P3701
module with P3740 carrier board.
Move the common device-tree nodes to a new file tegra234-p3701.dtsi and
use this for Jetson AGX Orin and NVIDIA IGX Orin platforms
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
[treding@nvidia.com: properly sort nodes]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add memory-region property to the tegra186-bpmp binding to support
DRAM MRQ GSCs.
Co-developed-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add bindings for DRAM MRQ GSC support.
Co-developed-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the tdm controller node and pins configuration of tdm for the
StarFive JH7110 SoC.
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add USB and PCIe PHY dts nodes for the StarFive JH7110 SoC.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
This reverts commit 981be238e1d28e156aa9da2a8722f86f02fd0453 because it
was totally bogus and duplicated existing minItems:
ruamel.yaml.constructor.DuplicateKeyError: while constructing a mapping
Documentation/devicetree/bindings/power/qcom,kpss-acc-v2.yaml: ignoring, error parsing file
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230724090109.19489-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This reverts commit da56a1bfba.
Bjorn Andersson, Fabio Estevam, Xiaolei Wang, and Jon Hunter reported that
da56a1bfba ("PCI: dwc: Wait for link up only if link is started") broke
controller probing by returning an error in case the link does not come up
during host initialisation, for example when the slot is empty.
As explained in commit 886a9c1347 ("PCI: dwc: Move link handling into
common code") and as indicated by the comment "Ignore errors, the link may
come up later" in the code, waiting for link up and ignoring errors is the
intended behaviour:
Let's standardize this to succeed as there are usecases where devices
(and the link) appear later even without hotplug. For example, a
reconfigured FPGA device.
Reverting the offending commit specifically fixes a regression on Qualcomm
platforms like the Lenovo ThinkPad X13s which no longer reach the
interconnect sync state if a slot does not have a device populated (e.g. an
optional modem).
Note that enabling asynchronous probing by default as was done for Qualcomm
platforms by commit c0e1eb441b ("PCI: qcom: Enable async probe by
default"), should take care of any related boot time concerns.
Finally, note that the intel-gw driver is the only driver currently not
providing a .start_link() callback and instead starts the link in its
.host_init() callback, which may avoid an additional one-second timeout
during probe by making the link-up wait conditional. If anyone cares, that
can be done in a follow-up patch with a proper motivation.
[bhelgaas: add Fabio Estevam, Xiaolei Wang, Jon Hunter reports]
Fixes: da56a1bfba ("PCI: dwc: Wait for link up only if link is started")
Link: https://lore.kernel.org/r/20230706082610.26584-1-johan+linaro@kernel.org
Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reported-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230704122635.1362156-1-festevam@gmail.com/
Reported-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20230705010624.3912934-1-xiaolei.wang@windriver.com/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/6ca287a1-6c7c-7b90-9022-9e73fb82b564@nvidia.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Sajid Dalvi <sdalvi@google.com>
Cc: Ajay Agarwal <ajayagarwal@google.com>
Drop ETM4X ACPI ID from the AMBA ACPI device list, and instead just move it
inside the new ACPI devices list detected and used via platform driver.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: linux-acpi@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> (for ACPI specific changes)
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Tanmay Jagdale <tanmay@marvell.com>
Link: https://lore.kernel.org/r/20230710062500.45147-7-anshuman.khandual@arm.com
Some components may not have graph connections for describing
the trace path. e.g., ETE, where it could directly use the per
CPU TRBE. Ignore the absence of graph connections
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230710062500.45147-6-anshuman.khandual@arm.com
Add support for handling MMIO based devices via platform driver. We need to
make sure that :
1) The APB clock, if present is enabled at probe and via runtime_pm ops
2) Use the ETM4x architecture or CoreSight architecture registers to
identify a device as CoreSight ETM4x, instead of relying a white list of
"Peripheral IDs"
The driver doesn't get to handle the devices yet, until we wire the ACPI
changes to move the devices to be handled via platform driver than the
etm4_amba driver.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230710062500.45147-5-anshuman.khandual@arm.com
Coresight device pid can be retrieved from its iomem base address, which is
stored in 'struct etm4x_drvdata'. This drops pid argument from etm4_probe()
and 'struct etm4_init_arg'. Instead etm4_check_arch_features() derives the
coresight device pid with a new helper coresight_get_pid(), right before it
is consumed in etm4_hisi_match_pid().
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230710062500.45147-4-anshuman.khandual@arm.com
'struct etm4_drvdata' itself can carry the base address before etm4_probe()
gets called. Just drop that redundant argument from etm4_probe().
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230710062500.45147-3-anshuman.khandual@arm.com
Allocate and device assign 'struct etmv4_drvdata' earlier during the driver
probe, ensuring that it can be retrieved in power management based runtime
callbacks if required. This will also help in dropping iomem base address
argument from the function etm4_probe() later.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230710062500.45147-2-anshuman.khandual@arm.com
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230718143124.1065949-1-robh@kernel.org
The platform_get_irq might be failed and return a negative result. So
there should have an error handling code.
Fixed this by adding an error handling code.
Fixes: 8528547bcc ("spi: tegra: add spi driver for sflash controller")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_71FC162D589E4788C2152AAC84CD8D5C6D06@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Bail out with EOPNOTSUPP when adding rule to bound chain via
NFTA_RULE_CHAIN_ID. The following warning splat is shown when
adding a rule to a deleted bound chain:
WARNING: CPU: 2 PID: 13692 at net/netfilter/nf_tables_api.c:2013 nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]
CPU: 2 PID: 13692 Comm: chain-bound-rul Not tainted 6.1.39 #1
RIP: 0010:nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]
Fixes: d0e2c7de92 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Reported-by: Kevin Rich <kevinrich1337@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
On error when building the rule, the immediate expression unbinds the
chain, hence objects can be deactivated by the transaction records.
Otherwise, it is possible to trigger the following warning:
WARNING: CPU: 3 PID: 915 at net/netfilter/nf_tables_api.c:2013 nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]
CPU: 3 PID: 915 Comm: chain-bind-err- Not tainted 6.1.39 #1
RIP: 0010:nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]
Fixes: 4bedf9eee0 ("netfilter: nf_tables: fix chain binding transaction logic")
Reported-by: Kevin Rich <kevinrich1337@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
The lazy gc on insert that should remove timed-out entries fails to release
the other half of the interval, if any.
Can be reproduced with tests/shell/testcases/sets/0044interval_overlap_0
in nftables.git and kmemleak enabled kernel.
Second bug is the use of rbe_prev vs. prev pointer.
If rbe_prev() returns NULL after at least one iteration, rbe_prev points
to element that is not an end interval, hence it should not be removed.
Lastly, check the genmask of the end interval if this is active in the
current generation.
Fixes: c9e6978e27 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection")
Signed-off-by: Florian Westphal <fw@strlen.de>
Drivers are not allowed to fail after drm_atomic_helper_swap_state() has
been called and the new atomic state is stored into the current sw state.
Since the struct ssd130x_device .data_array is allocated in the encoder's
.atomic_enable callback, the operation can fail and this is after the new
state has been stored. So it can break an atomic mode settings assumption.
Fix this by having custom helpers to allocate, duplicate and destroy the
plane state, that will take care of allocating and freeing these buffers.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726105433.389740-2-javierm@redhat.com
There is only a single caller for both helper functions and these don't do
much other than allocate and free two buffers, so let's just inline them.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726105433.389740-1-javierm@redhat.com
This function escapes certain special characters like \n. So if the
last character in the string is a '\n' then it gets changed into two
characters '\' and '\n'. But maybe we only have space for the '\' so
we need to check for that.
The "conv_dst_size" variable is always less than or to equal the "size"
variable. It's easier to just check "conv_dst_size" instead of checking
both.
Fixes: a34fc329b1 ("platform/x86: hp-bioscfg: bioscfg")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/b4950310-e65f-412f-8d2b-90bb074a6572@moroto.mountain
Reviewed-by: Jorge Lopez <jorge.lopez2@hp.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The error handling won't work if "mid" is unsigned. "ret" is used to
store negative error codes and declaring it as a u32 won't cause a bug
but it's ugly. The "actual_outsize" variable is a number between 0-4096
so it can be declared as int as well.
Fixes: 69ea03e38f ("platform/x86: hp-bioscfg: biosattr-interface")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ad0a6ad9-099b-40a4-ae91-b9dca622ff4e@moroto.mountain
Reviewed-by: Jorge Lopez <jorge.lopez2@hp.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The various StarFive PHYs are only present on StarFive SoCs. Hence add
a dependency on ARCH_STARFIVE, to prevent asking the user about these
drivers when configuring a kernel without StarFive SoC support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/r/12097f6107a18e2f7cfb80f47ac7b27808e062c4.1690300076.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Now that we actually call iommufd_device_bind() we can return the
idev_id from that function to userspace for use in other APIs.
Link: https://lore.kernel.org/r/18-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This allows userspace to manually create HWPTs on IOAS's and then use
those HWPTs as inputs to iommufd_device_attach/replace().
Following series will extend this to allow creating iommu_domains with
driver specific parameters.
Link: https://lore.kernel.org/r/17-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allow the selftest to call the function on the mock idev, add some tests
to exercise it.
Link: https://lore.kernel.org/r/16-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The selftest invokes things like replace under the object lock of its
idev which protects the idev in a similar way to a real user.
Unfortunately this triggers lockdep. A lock class per type will solve the
problem.
Link: https://lore.kernel.org/r/15-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replace allows all the devices in a group to move in one step to a new
HWPT. Further, the HWPT move is done without going through a blocking
domain so that the IOMMU driver can implement some level of
non-distruption to ongoing DMA if that has meaning for it (eg for future
special driver domains)
Replace uses a lot of the same logic as normal attach, except the actual
domain change over has different restrictions, and we are careful to
sequence things so that failure is going to leave everything the way it
was, and not get trapped in a blocking domain or something if there is
ENOMEM.
Link: https://lore.kernel.org/r/14-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
qemu has a need to replace the translations associated with a domain
when the guest does large-scale operations like switching between an
IDENTITY domain and, say, dma-iommu.c.
Currently, it does this by replacing all the mappings in a single
domain, but this is very inefficient and means that domains have to be
per-device rather than per-translation.
Provide a high-level API to allow replacements of one domain with
another. This is similar to a detach/attach cycle except it doesn't
force the group to go to the blocking domain in-between.
By removing this forced blocking domain the iommu driver has the
opportunity to implement a non-disruptive replacement of the domain to the
greatest extent its hardware allows. This allows the qemu emulation of the
vIOMMU to be more complete, as real hardware often has a non-distruptive
replacement capability.
It could be possible to address this by simply removing the protection
from the iommu_attach_group(), but it is not so clear if that is safe for
the few users. Thus, add a new API to serve this new purpose.
All drivers are already required to support changing between active
UNMANAGED domains when using their attach_dev ops.
This API is expected to be used only by IOMMUFD, so add to the iommu-priv
header and mark it as IOMMUFD_INTERNAL.
Link: https://lore.kernel.org/r/13-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The code flow for first time attaching a PT and replacing a PT is very
similar except for the lowest do_attach step.
Reorganize this so that the do_attach step is a function pointer.
Replace requires destroying the old HWPT once it is replaced. This
destruction cannot be done under all the locks that are held in the
function pointer, so the signature allows returning a HWPT which will be
destroyed by the caller after everything is unlocked.
Link: https://lore.kernel.org/r/12-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Due to the auto_domains mechanism the ioas->mutex must be held until
the hwpt is completely setup by iommufd_object_abort_and_destroy() or
iommufd_object_finalize().
This prevents a concurrent iommufd_device_auto_get_domain() from seeing
an incompletely initialized object through the ioas->hwpt_list.
To make this more consistent move the unlock until after finalize.
Fixes: e8d5721003 ("iommufd: Add kAPI toward external drivers for physical devices")
Link: https://lore.kernel.org/r/11-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
During creation the hwpt must have the ioas->mutex held until the object
is finalized. This means we need to be able to call
iommufd_object_abort_and_destroy() while holding the mutex.
Since iommufd_hw_pagetable_destroy() also needs the mutex this is
problematic.
Fix it by creating a special abort op for the object that can assume the
caller is holding the lock, as required by the contract.
The next patch will add another iommufd_object_abort_and_destroy() for a
hwpt.
Fixes: e8d5721003 ("iommufd: Add kAPI toward external drivers for physical devices")
Link: https://lore.kernel.org/r/10-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Logically the HWPT should have the coherency set properly for the device
that it is being created for when it is created.
This was happening implicitly if the immediate_attach was set because
iommufd_hw_pagetable_attach() does it as the first thing.
Do it unconditionally so !immediate_attach works properly.
Link: https://lore.kernel.org/r/9-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Next patch will need to call this from two places.
Link: https://lore.kernel.org/r/8-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The sw_msi_start is only set by the ARM drivers and it is always constant.
Due to the way vfio/iommufd allow domains to be re-used between
devices we have a built in assumption that there is only one value
for sw_msi_start and it is global to the system.
To make replace simpler where we may not reparse the
iommu_get_resv_regions() move the sw_msi_start to the iommufd_group so it
is always available once any HWPT has been attached.
Link: https://lore.kernel.org/r/7-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This only needs to be done once per group, not once per device. The once
per device was a way to make the device list work. Since we are abandoning
this we can optimize things a bit.
Link: https://lore.kernel.org/r/6-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The driver facing API in the iommu core makes the reserved regions
per-device. An algorithm in the core code consolidates the regions of all
the devices in a group to return the group view.
To allow for devices to be hotplugged into the group iommufd would re-load
the entire group's reserved regions for each device, just in case they
changed.
Further iommufd already has to deal with duplicated/overlapping reserved
regions as it must union all the groups together.
Thus simplify all of this to just use the device reserved regions
interface directly from the iommu driver.
Link: https://lore.kernel.org/r/5-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iommufd wants to use this in the next patch. For some reason the
iommu_put_resv_regions() was already exported.
Link: https://lore.kernel.org/r/4-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The devices list was used as a simple way to avoid having per-group
information. Now that this seems to be unavoidable, just commit to
per-group information fully and remove the devices list from the HWPT.
The iommufd_group stores the currently assigned HWPT for the entire group
and we can manage the per-device attach/detach with a list in the
iommufd_group.
For destruction the flow is organized to make the following patches
easier, the actual call to iommufd_object_destroy_user() is done at the
top of the call chain without holding any locks. The HWPT to be destroyed
is returned out from the locked region to make this possible. Later
patches create locking that requires this.
Link: https://lore.kernel.org/r/3-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the hwpt to device attachment is fairly static we could get away with
the simple approach of keeping track of the groups via a device list. But
with replace this is infeasible.
Add an automatically managed struct that is 1:1 with the iommu_group
per-ictx so we can store the necessary tracking information there.
Link: https://lore.kernel.org/r/2-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
