"regulators" node is just grouping regulators, but itself is not
describing one regulator, thus reference to regulator.yaml schema is
incorrect.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230725105421.99160-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The old jack detection function only supports fixed OMTP/CTIA
hardware connection. The new one supports auto OMTP/CTIA
headset detection
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20230717033223.42506-5-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Old power-up sequence causes large pop noise during start-up.
Using a new sequence instead.
Also, the registers are now reset to default value in suspend
function.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20230717033223.42506-3-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The new calibration and headphone detection function
require reading new volatile registers. Add them in
the volatile register function.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20230717033223.42506-2-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The old register naming method is confusing. The reg 0x57 decides
the default headset hardware connection type, and the reg 0xfb is
the headset detection status register, which changes during headset
insertion. Change the name to ES8326_HPDET_TYPE and ES8326_HPDET_STA.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20230717033223.42506-1-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The 8K sample parameter of 12.288Mhz main system bus clock doesn't work
because the I2SC_MR.IMCKDIV must not be 0 according to the sama5d2
series datasheet(I2SC Mode Register of Register Summary).
So use the 6.144Mhz instead of 12.288Mhz to support 8K sample.
Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
Link: https://lore.kernel.org/r/20230715030620.62328-1-aarongt.shen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090711.128247-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral Imp-defined interrupt is disabled.
When system level resume is invoked, the peripheral Imp-defined interrupts
should be enabled to handle JD events.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090654.128230-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090732.128282-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090721.128264-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral Imp-defined interrupt is disabled.
When system level resume is invoked, the peripheral Imp-defined interrupts
should be enabled to handle JD events.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090643.128213-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The devm_clk_get_enabled() helper:
- calls devm_clk_get()
- calls clk_prepare_enable() and registers what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the need of a dedicated function used
with devm_add_action_or_reset().
While at it, use dev_err_probe() which filters -EPROBE_DEFER.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a4a586337d692f0ca396b80d275ba634eb419593.1690058500.git.christophe.jaillet@wanadoo.fr
[geert: Make clk local to rzg2l_pinctrl_probe()]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This can reduce the kernel image size in multiplatform configurations.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Do not parse the devicetree again when the data is already available
from the IRQ subsystem. This follows the example of the ThunderX and
X-Gene GPIO drivers. The ngpio check is needed to avoid a possible
out-of-bounds read.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_irq_count(), or eqivalently platform_irq_count(), simply looks up
successively-numbered IRQs until that fails. Since this driver needs to
look up each IRQ anyway to get its virq number, use that existing loop
to count the IRQs at the same time.
The check against SIFIVE_GPIO_MAX functioned as a bounds check for
chip->irq_number. That is now handled by the loop condition.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is no need to convert dev->of_node back to a fwnode_handle.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If CONFIG_PM=n (e.g. m68k/allmodconfig):
drivers/gpio/gpio-mxc.c:612:12: error: ‘mxc_gpio_runtime_resume’ defined but not used [-Werror=unused-function]
612 | static int mxc_gpio_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpio/gpio-mxc.c:602:12: error: ‘mxc_gpio_runtime_suspend’ defined but not used [-Werror=unused-function]
602 | static int mxc_gpio_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fix this by using the non-SET *_PM_OPS to configure the dev_pm_ops
callbacks, and by wrapping the driver.pm initializer insider pm_ptr().
As NOIRQ_SYSTEM_SLEEP_PM_OPS() uses pm_sleep_ptr() internally, the
__maybe_unused annotations for the noirq callbacks are no longer needed,
and can be removed.
Fixes: 3283d820dc ("gpio: mxc: add runtime pm support")
Reported-by: noreply@ellerman.id.au
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The PHY interrupt (INT_N) pin is connected to IRQ0 for ETH0.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230712151153.81965-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
dtbs_check w/ W=1 complains:
Warning (unit_address_vs_reg): /soc/ethernet@11c20000/ethernet-phy@7: node has a unit name, but no reg or ranges property
Warning (avoid_unnecessary_addr_size): /soc/ethernet@11c20000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
The ethernet@11c20000 node is guarded by an `#if (!SW_ET0_EN_N)` in
rzg2ul-smarc-som.dtsi, where the phy child node is added. In
rzfive-smarc-som.dtsi, the ethernet node is marked disabled & the
interrupt properties are deleted from the phy child node. As a result,
the produced dts looks like:
ethernet@11c20000 {
compatible = "renesas,r9a07g043-gbeth",
"renesas,rzg2l-gbeth";
/* snip */
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
ethernet-phy@7 {
};
};
Adding a corresponding `#if (!SW_ET0_EN_N)` around the node in
rzfive-smarc-som.dtsi avoids the complaint, as the empty child node is
not added:
ethernet@11c20000 {
compatible = "renesas,r9a07g043-gbeth",
"renesas,rzg2l-gbeth";
/* snip */
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230712-squealer-walmart-9587342ddec1@wendy
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for PMOD_MTU3 macro to enable MTU3 node on RZ/G2LC SMARC
EVK.
The MTU3a PWM pins on PMOD0 are muxed with SPI1. Disable SPI1, when
PMOD_MTU3 macro is enabled.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230707155849.86649-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for PMOD_MTU3 macro to enable MTU3 node on RZ/{G2,V2}L SMARC
EVK.
The MTU3a PWM pins are muxed with spi1 pins and counter external input
phase clock pins are muxed with scif2 pins. Disable these IPs when
PMOD_MTU3 macro is enabled.
Apart from this, the counter Z phase clock signal is muxed with the
SDHI1 cd signal. So disable SDHI1 IP, when the counter Z phase signal
is enabled.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230706153047.368993-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230702185252.44462-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/V2M comes with 6 Clocked Serial Interface (CSI)
IPs (CSI0, CSI1, CSI2, CSI3, CSI4, CSI5), but Linux is only
allowed access to CSI0 and CSI4.
This commit adds SoC specific device tree support for CSI0 and
CSI4.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230622113341.657842-5-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
It looks like txdv-skew-psec is a typo from a copy+paste. txdv-skew-psec
is not present in the PHY bindings nor is it in the driver.
Correct to txen-skew-psec which is clearly what it was meant to be.
Given that the default for txen-skew-psec is 0, and the device tree is
only trying to set it to 0 anyway, there should not be any functional
change from this fix.
Fixes: 361b0dcbd7 ("arm64: dts: renesas: rzg2l-smarc-som: Enable Ethernet")
Fixes: 6494e4f905 ("arm64: dts: renesas: rzg2ul-smarc-som: Enable Ethernet on SMARC platform")
Fixes: ce0c63b6a5 ("arm64: dts: renesas: Add initial device tree for RZ/G2LC SMARC EVK")
Cc: stable@vger.kernel.org # 6.1.y
Reported-by: Tomohiro Komagata <tomohiro.komagata.aj@renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230609221136.7431-1-chris.paterson2@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
of_platform.h is not needed, so drop it.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230717225614.3214179-1-robh@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
commit a3a57bf07d ("net: stmmac: work
around sporadic tx issue on link-up") worked around a problem with TX
sometimes not working after a link-up by avoiding a redundant write to
MAC_CTRL_REG (aka GMAC_CONFIG), since the IP appeared to have problems
with handling multiple writes to that register in some cases.
That commit however only added the work around to dwmac_lib.c (apart
from the common code in stmmac_main.c), but my systems with version
4.21a of the IP exhibit the same problem, so add the work around to
dwmac4_lib.c too.
Fixes: a3a57bf07d ("net: stmmac: work around sporadic tx issue on link-up")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721-stmmac-tx-workaround-v1-1-9411cbd5ee07@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Revert commit 531b3d1195 ("MIPS: Loongson: Fix build error when make
modules_install"), which made `-march=loongson2e', `-march=loongson2f',
and `-march=loongson3a' compilation options probed for even though GCC
has supported them since 4.4.0, 4.4.0, and 4.6.0 respectively, which is
below our current minimum requirement of 5.1, in an attempt to work
around for the `cc-option' `make' function being undefined with `make'
targets that do not use the compiler. The workaround has now been made
obsolete, by querying the `need-compiler' variable instead so as to make
sure the compiler isn't called for non-build targets.
Verified with `fuloong2e_defconfig' and the `modules_install' target.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
We have originally guarded fiddling with CHECKFLAGS in our arch Makefile
by checking for the CONFIG_MIPS variable, not set for targets such as
`distclean', etc. that neither include `.config' nor use the compiler.
Starting from commit 805b2e1d42 ("kbuild: include Makefile.compiler
only when compiler is needed") we have had a generic `need-compiler'
variable explicitly telling us if the compiler will be used and thus its
capabilities need to be checked and expressed in the form of compilation
flags. If this variable is not set, then `make' functions such as
`cc-option' are undefined, causing all kinds of weirdness to happen if
we expect specific results to be returned, most recently:
cc1: error: '-mloongson-mmi' must be used with '-mhard-float'
messages with configurations such as `fuloong2e_defconfig' and the
`modules_install' target, which does include `.config' and yet does not
use the compiler.
Replace the check for CONFIG_MIPS with one for `need-compiler' instead,
so as to prevent the compiler from being ever called for CHECKFLAGS when
not needed.
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Closes: https://lore.kernel.org/r/85031c0c-d981-031e-8a50-bc4fad2ddcd8@collabora.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 805b2e1d42 ("kbuild: include Makefile.compiler only when compiler is needed")
Cc: stable@vger.kernel.org # v5.13+
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove a build-time check for the presence of the GCC `-msym32' option.
This option has been there since GCC 4.1.0, which is below the minimum
required as at commit 805b2e1d42 ("kbuild: include Makefile.compiler
only when compiler is needed"), when an error message:
arch/mips/Makefile:306: *** CONFIG_CPU_DADDI_WORKAROUNDS unsupported without -msym32. Stop.
started to trigger for the `modules_install' target with configurations
such as `decstation_64_defconfig' that set CONFIG_CPU_DADDI_WORKAROUNDS,
because said commit has made `cc-option-yn' an undefined function for
non-build targets.
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 805b2e1d42 ("kbuild: include Makefile.compiler only when compiler is needed")
Cc: stable@vger.kernel.org # v5.13+
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
If we encounter any error in the vdec_msg_queue_init() then we need
to set "msg_queue->wdma_addr.size = 0;". Normally, this is done
inside the vdec_msg_queue_deinit() function. However, if the
first call to allocate &msg_queue->wdma_addr fails, then the
vdec_msg_queue_deinit() function is a no-op. For that situation, just
set the size to zero explicitly and return.
There were two other error paths which did not clean up before returning.
Change those error paths to goto mem_alloc_err.
Fixes: b199fe46f3 ("media: mtk-vcodec: Add msg queue feature for lat and core architecture")
Fixes: 2f5d0aef37 ("media: mediatek: vcodec: support stateless AV1 decoder")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The "lat_buf->private_data" needs to be set to NULL to prevent a
double free. How this would happen is if vdec_msg_queue_init() failed
twice in a row and on the second time it failed earlier than on the
first time.
The vdec_msg_queue_init() function has a loop which does:
for (i = 0; i < NUM_BUFFER_COUNT; i++) {
Each iteration initializes one element in the msg_queue->lat_buf[] array
and then the clean up function vdec_msg_queue_deinit() frees each
element of the msg_queue->lat_buf[] array. This clean up code relies
on the assumption that every element is either initialized or zeroed.
Leaving a freed pointer which is non-zero breaks the assumption.
Fixes: b199fe46f3 ("media: mtk-vcodec: Add msg queue feature for lat and core architecture")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As of today, hash extraction support is enabled for all the silicons.
Because of which we are facing initialization issues when the silicon
does not support hash extraction. During creation of the hardware
parsing table for IPv6 address, we need to consider if hash extraction
is enabled then extract only 32 bit, otherwise 128 bit needs to be
extracted. This patch fixes the issue and configures the hardware parser
based on the availability of the feature.
Fixes: a95ab93550 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721061222.2632521-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fixes the warnings:
at24 0-0057: supply vcc not found, using dummy regulator
lm75 0-0049: supply vs not found, using dummy regulator
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Describe the Ethernet aliases so that the second MAC address
can be retrieved from the bootloader.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fb_use_list" is used to store used or referenced frame buffers for
vp9 stateful decoder. "NULL" should be returned when getting target
frame buffer failed from "fb_use_list", not a random unexpected one.
Fixes: f77e89854b ("[media] vcodec: mediatek: Add Mediatek VP9 Video Decoder Driver")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix av1 decode fail when iova is 36bit.
Decoder hardware will access incorrect iova address when tile buffer is
36bit, it will lead to iommu fault when hardware access dram data.
Fixes: 2f5d0aef37 ("media: mediatek: vcodec: support stateless AV1 decoder")
Signed-off-by: Xiaoyong Lu<xiaoyong.lu@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
