Allow the GPIO controller subnode to define GPIO names. Already used in
at least on DTS:
bitmain/bm1880-sophon-edge.dtb: gpio@50027000: gpio-controller@0: 'gpio-line-names' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use devm version of gpiochip add function to handle removal for us.
While here update copyright and module author.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----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=yO9Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Stable fixes:
- fix race between balance and cancel/pause
- various iput() fixes
- fix use-after-free of new block group that became unused
- fix warning when putting transaction with qgroups enabled after
abort
- fix crash in subpage mode when page could be released between map
and map read
- when scrubbing raid56 verify the P/Q stripes unconditionally
- fix minor memory leak in zoned mode when a block group with an
unexpected superblock is found
Regression fixes:
- fix ordered extent split error handling when submitting direct IO
- user irq-safe locking when adding delayed iputs"
* tag 'for-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix warning when putting transaction with qgroups enabled after abort
btrfs: fix ordered extent split error handling in btrfs_dio_submit_io
btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand
btrfs: raid56: always verify the P/Q contents for scrub
btrfs: use irq safe locking when running and adding delayed iputs
btrfs: fix iput() on error pointer after error during orphan cleanup
btrfs: fix double iput() on inode after an error during orphan cleanup
btrfs: zoned: fix memory leak after finding block group with super blocks
btrfs: fix use-after-free of new block group that became unused
btrfs: be a bit more careful when setting mirror_num_ret in btrfs_map_block
btrfs: fix race between balance and cancel/pause
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230717225358.3210536-1-robh@kernel.org
Signed-off-by: Michal Simek <michal.simek@amd.com>
One fix for an issue with parsing partially specified DTs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmS5MIMACgkQJNaLcl1U
h9Cz9Af/VGJG/hTOHkaFop2ThvTEhneMejbGvUAbvbiFiG3qLDcH69oFG7v/smCB
n/lKzEqAs5FGiksfj4tRJbQUREaCWOvctyVt6XxFrjc8ewxnZP7YBIYPM/u4KD7t
irwqq+0SvjLsX2tjfUYPvCG1+m7OGQWHhygaTuxl+DIucJeGmhevzHtsV+ZBQvyc
1TD2T8CALxMXZp3u5E0hol+42dfSL0SkNixhc6psWqC/hDBXqAdiQ5xXwoK9r6+G
R7qw0ODTiWuBbusltlDZ8W+sUvdO977z/+NlCItYVpgVZWAK8ODAYurH+e9fwrvv
wjVZe+yS2ZaCjZDC0//1P671r8xmWA==
=Njfr
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix for an issue with parsing partially specified DTs"
* tag 'regulator-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: da9063: fix null pointer deref with partial DT config
The length information for available buffer space for CCA
replies is covered with two fields in the T6 header prepended
on each CCA reply: fromcardlen1 and fromcardlen2. The sum of
these both values must not exceed the AP bus limit for this
card (24KB for CEX8, 12KB CEX7 and older) minus the always
present headers.
The current code adjusted the fromcardlen2 value in case
of exceeding the AP bus limit when there was a non-zero
value given from userspace. Some tests now showed that this
was the wrong assumption. Instead the userspace value given for
this field should always be trusted and if the sum of the
two fields exceeds the AP bus limit for this card the first
field fromcardlen1 should be adjusted instead.
So now the calculation is done with this new insight in mind.
Also some additional checks for overflow have been introduced
and some comments to provide some documentation for future
maintainers of this complicated calculation code.
Furthermore the 128 bytes of fix overhead which is used
in the current code is not correct. Investigations showed
that for a reply always the same two header structs are
prepended before a possible payload. So this is also fixed
with this patch.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
key might contain private part of the key, so better use
kfree_sensitive() to free it.
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20230717094533.18418-1-machel@vivo.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When wrapping code, use ';' better than using ',' which is more in line
with the coding habits of most engineers.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: opensource.kernel@vivo.com
Link: https://lore.kernel.org/r/20230706094635.1553-1-luhongfei@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be useful to show the incremental overhead as we do more stuff in
the BPF program attached to the uprobes.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andre Fredette <anfredet@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Dave Tucker <datucker@redhat.com>
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20230719204910.539044-4-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is just prep work to show the diff to the unmodified workload.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andre Fredette <anfredet@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Dave Tucker <datucker@redhat.com>
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20230719204910.539044-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This just adds the initial "workload", a call to libc's usleep(1000us)
function:
$ perf stat --null perf bench uprobe all
# Running uprobe/baseline benchmark...
# Executed 1000 usleep(1000) calls
Total time: 1053533 usecs
1053.533 usecs/op
Performance counter stats for 'perf bench uprobe all':
1.061042896 seconds time elapsed
0.001079000 seconds user
0.006499000 seconds sys
$
More entries will be added using a BPF skel to add various uprobes to
the usleep() function.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andre Fredette <anfredet@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Dave Tucker <datucker@redhat.com>
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20230719204910.539044-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now the perf tools development is done on these trees/branches:
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools.git perf-tools
git git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git perf-tools-next
For a while I'll continue mirroring what is these to the same branches
in my git tree.
Suggested-by: John Garry <john.g.garry@oracle.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/CAP-5=fVGOP6-k=BTRd_bn=N0HVy+1ShpdW5rk5ND0ZGhm_fQkg@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fd->pathname table that is kept in 'struct thread_trace' and thus in
thread->priv must be freed when a thread is deleted.
This was also detected using -fsanitize=address.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20230719202951.534582-6-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 3cb4d5e00e ("perf trace: Free syscall tp fields in
evsel->priv") it only was freeing if strcmp(evsel->tp_format->system,
"syscalls") returned zero, while the corresponding initialization of
evsel->priv was being performed if it was _not_ zero, i.e. if the tp
system wasn't 'syscalls'.
Just stop looking for that and free it if evsel->priv was set, which
should be equivalent.
Also use the pre-existing evsel_trace__delete() function.
This resolves these leaks, detected with:
$ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin
=================================================================
==481565==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097)
#1 0x987966 in zalloc (/home/acme/bin/perf+0x987966)
#2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307
#3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333
#4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458
#5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480
#6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212
#7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891
#8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156
#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097)
#1 0x987966 in zalloc (/home/acme/bin/perf+0x987966)
#2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307
#3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333
#4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458
#5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480
#6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205
#7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891
#8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156
#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)
SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s).
[root@quaco ~]#
With this we plug all leaks with "perf trace sleep 1".
Fixes: 3cb4d5e00e ("perf trace: Free syscall tp fields in evsel->priv")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: https://lore.kernel.org/lkml/20230719202951.534582-5-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
in mcfqspi_probe(), the return value of function
clk_prepare_enable() should be checked, since it may fail.
using devm_clk_get_enabled() instead of devm_clk_get() and
clk_prepare_enable() can avoid this problem.
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230720140909.34084-1-ruc_gongyuanjun@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
in bcm2835_spi_probe(), clk_prepare_enable() may fail, therefore,
the return value of clk_prepare_enable() should be checked, and
the function should return error if clk_prepare_enable() fails.
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230720140859.33883-1-ruc_gongyuanjun@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To plug these leaks detected with:
$ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin
=================================================================
==473890==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 112 byte(s) in 1 object(s) allocated from:
#0 0x7fdf19aba097 in calloc (/lib64/libasan.so.8+0xba097)
#1 0x987836 in zalloc (/home/acme/bin/perf+0x987836)
#2 0x5367ae in thread_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:1289
#3 0x5367ae in thread__trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:1307
#4 0x5367ae in trace__sys_exit /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:2468
#5 0x52bf34 in trace__handle_event /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3177
#6 0x52bf34 in __trace__deliver_event /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3685
#7 0x542927 in trace__deliver_event /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3712
#8 0x542927 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:4055
#9 0x542927 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5141
#10 0x5ef1a2 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
#11 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
#12 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
#13 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
#14 0x7fdf18a4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)
Direct leak of 2048 byte(s) in 1 object(s) allocated from:
#0 0x7f788fcba6af in __interceptor_malloc (/lib64/libasan.so.8+0xba6af)
#1 0x5337c0 in trace__sys_enter /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:2342
#2 0x52bfb4 in trace__handle_event /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3191
#3 0x52bfb4 in __trace__deliver_event /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3699
#4 0x542883 in trace__deliver_event /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3726
#5 0x542883 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:4069
#6 0x542883 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5155
#7 0x5ef232 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
#8 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
#9 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
#10 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
#11 0x7f788ec4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)
Indirect leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7fdf19aba6af in __interceptor_malloc (/lib64/libasan.so.8+0xba6af)
#1 0x77b335 in intlist__new util/intlist.c:116
#2 0x5367fd in thread_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:1293
#3 0x5367fd in thread__trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:1307
#4 0x5367fd in trace__sys_exit /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:2468
#5 0x52bf34 in trace__handle_event /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3177
#6 0x52bf34 in __trace__deliver_event /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3685
#7 0x542927 in trace__deliver_event /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3712
#8 0x542927 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:4055
#9 0x542927 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5141
#10 0x5ef1a2 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
#11 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
#12 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
#13 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
#14 0x7fdf18a4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20230719202951.534582-4-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that when thread__delete() runs it can be called and free stuff tools
stashed into thread->priv, like 'perf trace' does and will use this
new facility to plug some leaks.
Added an assert(thread__priv_destructor == NULL) as suggested in Ian's
review.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/CAP-5=fV3Er=Ek8=iE=bSGbEBmM56_PJffMWot1g_5Bh8B5hO7A@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Noticed with:
make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin
Direct leak of 45 byte(s) in 1 object(s) allocated from:
#0 0x7f213f87243b in strdup (/lib64/libasan.so.8+0x7243b)
#1 0x63d15f in evsel__set_filter util/evsel.c:1371
#2 0x63d15f in evsel__append_filter util/evsel.c:1387
#3 0x63d15f in evsel__append_tp_filter util/evsel.c:1400
#4 0x62cd52 in evlist__append_tp_filter util/evlist.c:1145
#5 0x62cd52 in evlist__append_tp_filter_pids util/evlist.c:1196
#6 0x541e49 in trace__set_filter_loop_pids /home/acme/git/perf-tools/tools/perf/builtin-trace.c:3646
#7 0x541e49 in trace__set_filter_pids /home/acme/git/perf-tools/tools/perf/builtin-trace.c:3670
#8 0x541e49 in trace__run /home/acme/git/perf-tools/tools/perf/builtin-trace.c:3970
#9 0x541e49 in cmd_trace /home/acme/git/perf-tools/tools/perf/builtin-trace.c:5141
#10 0x5ef1a2 in run_builtin /home/acme/git/perf-tools/tools/perf/perf.c:323
#11 0x4196da in handle_internal_command /home/acme/git/perf-tools/tools/perf/perf.c:377
#12 0x4196da in run_argv /home/acme/git/perf-tools/tools/perf/perf.c:421
#13 0x4196da in main /home/acme/git/perf-tools/tools/perf/perf.c:537
#14 0x7f213e84a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)
Free it on evsel__exit().
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20230719202951.534582-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sort the driver symbols alphabetically in order to make it more obvious
where new driver entries should be added.
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Exar devices like XR21B1411 can control an RS485 transceiver by
automatically asserting the RTS#/RS485 pin before sending data
and deasserting it when the last stop bit has been transmitted.
The polarity of the RST#/RS485 signal is configurable and the
hardware also supports half-duplex turn-around delay and
address matching mode.
Add support for enabling and disabling RS-485 mode and
configuring the RST#/RS485 signal polarity using the TIOCGRS485
and TIOCSRS485 ioctls. Support for half-duplex turn-around delay
and address matching mode are left unimplemented for now.
User enables RS-485 mode by setting SER_RS485_ENABLED flag in
struct serial_rs485 flags. User should also set either
SER_RS485_RTS_ON_SEND or SER_RS485_RTS_AFTER_SEND to select the
behaviour of the RTS#/RS485 pin. Setting SER_RS485_RTS_ON_SEND
will drive RTS#/RS485 low during transmission.
Signed-off-by: Jarkko Sonninen <kasper@iki.fi>
[ johan: let SER_RS485_RTS_ON_SEND determine SER_RS485_RTS_AFTER_SEND ]
Signed-off-by: Johan Hovold <johan@kernel.org>
A few more fixes for v6.5, just small driver specific ones.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmS5MMUACgkQJNaLcl1U
h9CM7Qf/SBbKSkwZvfHEMrp+X1Gavl7aVCdfbxSU73eMhEM0ix8mjFJyKaliu3n5
8t6K8sV+I6fGj89IaLr2s4aAhpN/f28oUsvIPfBQg0Druv52qWAHA0u87kvLAny6
GMpO1mbnA4xVEH9kz9v/HXiH7+2JEUb5+fH60vrITDFai2MrCdt9Y26jEiEX9jBd
cH4qR/HQ0czVPzz0hWwb9nNPEkANAocYrMpOIPxiH3SGfGb/kj4h37sX3VM330En
pAan5veemH+MR4Gpc/y3dpXLCMafXfLRJ4j44S+ACCYQ5c5dawQSXlLfYSGLRNCr
S8Wl/GOcq9CzbgAwy+gepbVwFj6+Bg==
=hXE+
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.5-rc1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.5
A few more fixes for v6.5, just small driver specific ones.
REGCACHE_RBTREE and REGCACHE_MAPLE dynamically allocate memory for regmap
operations. This is incompatible with spinlock based locking which is used
for fast_io operations. Reject affected configurations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230720032848.1306349-2-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
REGCACHE_RBTREE and REGCACHE_MAPLE dynamically allocate memory
for regmap operations. This is incompatible with spinlock based locking
which is used for fast_io operations. Disable locking for the associated
unit tests to avoid lockdep splashes.
Fixes: f033c26de5 ("regmap: Add maple tree based register cache")
Fixes: 2238959b6a ("regmap: Add some basic kunit tests")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230720032848.1306349-1-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe() function fails with an error for platform_get_irq_byname()
but only logs when devm_request_threaded_irq() fails. Make this
consistent and fail to probe in that case as well. In practice this
should never happen unless something is really wrong.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230718-pm8916-mclk-v1-5-4b4a58b4240a@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio codec typically used for the MSM8916 SoC is split into two
parts: the digital codec is part of the SoC, while the analog codec is
part of the PM8916 PMIC.
The analog codec in the PMIC has no direct connection to the mclk of
the SoC (GCC_CODEC_DIGCODEC_CLK). As the name of the clock suggests
this is supplied to the digital part of the codec. During playback it
will use this clock to transmit the audio data via the "CDC PDM" pins
to the PMIC. In this case the analog codec indirectly receives the
clock signal through the digital codec.
GCC_CODEC_DIGCODEC_CLK is already managed by the driver of the digital
part of the codec in the SoC. Having this clock on the analog PMIC part
additionally is redundant and incorrect because the analog codec cannot
receive the clock signal without going through the digital codec.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230718-pm8916-mclk-v1-4-4b4a58b4240a@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio codec typically used for the MSM8916 SoC is split into two
parts: the digital codec is part of the SoC, while the analog codec is
part of the PM8916 PMIC.
The analog codec in the PMIC has no direct connection to the mclk of
the SoC (GCC_CODEC_DIGCODEC_CLK). As the name of the clock suggests
this is supplied to the digital part of the codec. During playback it
will use this clock to transmit the audio data via the "CDC PDM" pins
to the PMIC. In this case the analog codec indirectly receives the
clock signal through the digital codec.
GCC_CODEC_DIGCODEC_CLK is already managed by the driver of the digital
part of the codec in the SoC. Having this clock on the analog PMIC part
additionally is redundant and incorrect because the analog codec cannot
receive the clock signal without going through the digital codec.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718-pm8916-mclk-v1-3-4b4a58b4240a@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
pm8916-wcd-analog-codec has just a single reg region, so having a name
for it provides no additional value.
Drop it completely from the schema and example. There is not really any
point in keeping it (even as deprecated) because it was never used. In
old DTBs it will just be ignored as before.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718-pm8916-mclk-v1-2-4b4a58b4240a@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
SPMI devices typically have a single address cell and no size cell,
i.e. reg = <0xf000> for the audio codec instead of reg = <0xf000 0x200>.
The example is a bit misleading because it uses the latter. Copying
this into the device tree would be incorrect and was fixed before for
pm8916.dtsi in commit c2f0cbb57d ("arm64: dts: qcom: pm8916: Remove
invalid reg size from wcd_codec").
Make the example more clear by adding the outer "pmic" node which
specifies the same #address/size-cells that would be used in the
real deivce tree.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718-pm8916-mclk-v1-1-4b4a58b4240a@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Add #sound-dai-cells property and reference dai-common.yaml schema, this
is required since NAU8822 can be used as a platform DAI link.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230719124752.248898-2-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
Uwe Kleine-König pointed out we still have one resource leak in the mvebu
driver triggered on driver detach. Let's address it with a custom devm
action.
Fixes: 812d47889a ("gpio/mvebu: Use irq_domain_add_linear")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
SCMI transport based on SMC can optionally use an additional IRQ to
signal message completion. The associated interrupt handler is currently
allocated using devres but on shutdown the core SCMI stack will call
.chan_free() well before any managed cleanup is invoked by devres.
As a consequence, the arrival of a late reply to an in-flight pending
transaction could still trigger the interrupt handler well after the
SCMI core has cleaned up the channels, with unpleasant results.
Inhibit further message processing on the IRQ path by explicitly freeing
the IRQ inside .chan_free() callback itself.
Fixes: dd820ee21d ("firmware: arm_scmi: Augment SMC/HVC to allow optional interrupt")
Reported-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230719173533.2739319-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add the device and product ID for this CAN bus interface / license
dongle. The device is usable either directly from user space or can be
attached to a kernel CAN interface with slcan_attach.
Reported-by: Kaufmann Automotive GmbH <info@kaufmann-automotive.ch>
Tested-by: Kaufmann Automotive GmbH <info@kaufmann-automotive.ch>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
[ johan: amend commit message and move entries in sort order ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Currently abandon_console_lock_in_panic() is only used to determine if
the current CPU should immediately release the console lock because
another CPU is in panic. However, later this function will be used by
the CPU to immediately release other resources in this situation.
Rename the function to other_cpu_in_panic(), which is a better
description and does not assume it is related to the console lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-8-john.ogness@linutronix.de
Currently the global @console_suspended is used to determine if
consoles are in a suspended state. Its primary purpose is to allow
usage of the console_lock when suspended without causing console
printing. It is synchronized by the console_lock.
Rather than relying on the console_lock to determine suspended
state, make it an official per-console state that is set within
console->flags. This allows the state to be queried via SRCU.
Remove @console_suspended. Console printing will still be avoided
when suspended because console_is_usable() returns false when
the new suspended flag is set for that console.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-7-john.ogness@linutronix.de
Printing to consoles can be deferred for several reasons:
- explicitly with printk_deferred()
- printk() in NMI context
- recursive printk() calls
The current implementation is not consistent. For printk_deferred(),
irq work is scheduled twice. For NMI und recursive, panic CPU
suppression and caller delays are not properly enforced.
Correct these inconsistencies by consolidating the deferred printing
code so that vprintk_deferred() is the top-level function for
deferred printing and vprintk_emit() will perform whichever irq_work
queueing is appropriate.
Also add kerneldoc for wake_up_klogd() and defer_console_output() to
clarify their differences and appropriate usage.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-6-john.ogness@linutronix.de
Currently console_flush_on_panic() will attempt to acquire the
console lock when flushing the buffer on panic. If it fails to
acquire the lock, it continues anyway because this is the last
chance to get any pending records printed.
The reason why the console lock was attempted at all was to
prevent any other CPUs from acquiring the console lock for
printing while the panic CPU was printing. But as of the
previous commit, non-panic CPUs will no longer attempt to
acquire the console lock in a panic situation. Therefore it is
no longer strictly necessary for a panic CPU to acquire the
console lock.
Avoiding taking the console lock when flushing in panic has
the additional benefit of avoiding possible deadlocks due to
semaphore usage in NMI context (semaphores are not NMI-safe)
and avoiding possible deadlocks if another CPU accesses the
semaphore and is stopped while holding one of the semaphore's
internal spinlocks.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-5-john.ogness@linutronix.de
When in a panic situation, non-panic CPUs should avoid holding the
console lock so as not to contend with the panic CPU. This is already
implemented with abandon_console_lock_in_panic(), which is checked
after each printed line. However, non-panic CPUs should also avoid
trying to acquire the console lock during a panic.
Modify console_trylock() to fail and console_lock() to block() when
called from a non-panic CPU during a panic.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-4-john.ogness@linutronix.de
A semaphore is not NMI-safe, even when using down_trylock(). Both
down_trylock() and up() are using internal spinlocks and up()
might even call wake_up_process().
In the panic() code path it gets even worse because the internal
spinlocks of the semaphore may have been taken by a CPU that has
been stopped.
To reduce the risk of deadlocks caused by the console semaphore in
the panic path, make the following changes:
- First check if any consoles have implemented the unblank()
callback. If not, then there is no reason to take the console
semaphore anyway. (This check is also useful for the non-panic
path since the locking/unlocking of the console lock can be
quite expensive due to console printing.)
- If the panic path is in NMI context, bail out without attempting
to take the console semaphore or calling any unblank() callbacks.
Bailing out is acceptable because console_unblank() would already
bail out if the console semaphore is contended. The alternative of
ignoring the console semaphore and calling the unblank() callbacks
anyway is a bad idea because these callbacks are also not NMI-safe.
If consoles with unblank() callbacks exist and console_unblank() is
called from a non-NMI panic context, it will still attempt a
down_trylock(). This could still result in a deadlock if one of the
stopped CPUs is holding the semaphore internal spinlock. But this
is a risk that the kernel has been (and continues to be) willing
to take.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-3-john.ogness@linutronix.de
It is allowed for consoles to not provide a write() callback. For
example ttynull does this.
Check if a write() callback is available before using it.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-2-john.ogness@linutronix.de
Two functions got added with normal prototypes for debugfs, but not
alternative when building without it:
drivers/accel/habanalabs/common/device.c: In function 'hl_device_init':
drivers/accel/habanalabs/common/device.c:2177:14: error: implicit declaration of function 'hl_debugfs_device_init'; did you mean 'hl_debugfs_init'? [-Werror=implicit-function-declaration]
drivers/accel/habanalabs/common/device.c:2305:9: error: implicit declaration of function 'hl_debugfs_device_fini'; did you mean 'hl_debugfs_remove_file'? [-Werror=implicit-function-declaration]
Add stubs for these as well.
Fixes: 3b9abb4fa6 ("accel/habanalabs: expose debugfs files later")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609120636.3969045-1-arnd@kernel.org
tcp_sequence() uses two conditions to decide to drop a packet,
and we currently report generic TCP_INVALID_SEQUENCE drop reason.
Duplicates are common, we need to distinguish them from
the other case.
I chose to not reuse TCP_OLD_DATA, and instead added
TCP_OLD_SEQUENCE drop reason.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719064754.2794106-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
