Commit 35727af2b1 ("irqchip/gicv3: Workaround for NVIDIA erratum
T241-FABRIC-4") moved the initialisation of the SoC version to
arm_smccc_version_init() but forgot to update the results structure
and it's usage.
Fix the use of the uninitialised results structure and update the
error strings.
Fixes: 35727af2b1 ("irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4")
Signed-off-by: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Vikram Sethi <vsethi@nvidia.com>
Cc: Shanker Donthineni <sdonthineni@nvidia.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230717171702.424253-1-punit.agrawal@bytedance.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Create a new netconsole runtime option that prepends the kernel version in
the netconsole message. This is useful to map kernel messages to kernel
version in a simple way, i.e., without checking somewhere which kernel
version the host that sent the message is using.
If this option is selected, then the "<release>," is prepended before the
netconsole message. This is an example of a netconsole output, with
release feature enabled:
6.4.0-01762-ga1ba2ffe946e;12,426,112883998,-;this is a test
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230714111330.3069605-1-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SM8250 (like SM8150 but unlike all other QUP-equipped SoCs) doesn't
provide a qup-core path. Adjust the bindings and drivers as necessary,
and then describe the icc paths in the device tree. This makes it possible
for interconnect sync_state succeed so long as you don't use UFS.
* icc-sm8250-qup
dt-bindings: interconnect: qcom,rpmh: Add SM8250 QUP virt
dt-bindings: interconnect: qcom,sm8250: Add QUP virt
interconnect: qcom: sm8250: Fix QUP0 nodes
Link: https://lore.kernel.org/r/20230703-topic-8250_qup_icc-v2-0-9ba0a9460be2@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The QUP0 BCM relates to some internal property of the QUPs, and should
be configured independently of the path to the QUP. In line with other
platforms expose QUP_CORE endpoints in order allow this configuration.
Fixes: 6df5b34949 ("interconnect: qcom: Add SM8250 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230703-topic-8250_qup_icc-v2-3-9ba0a9460be2@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
When exploiting memory vulnerabilities, "heap spraying" is a common
technique targeting those related to dynamic memory allocation (i.e. the
"heap"), and it plays an important role in a successful exploitation.
Basically, it is to overwrite the memory area of vulnerable object by
triggering allocation in other subsystems or modules and therefore
getting a reference to the targeted memory location. It's usable on
various types of vulnerablity including use after free (UAF), heap out-
of-bound write and etc.
There are (at least) two reasons why the heap can be sprayed: 1) generic
slab caches are shared among different subsystems and modules, and
2) dedicated slab caches could be merged with the generic ones.
Currently these two factors cannot be prevented at a low cost: the first
one is a widely used memory allocation mechanism, and shutting down slab
merging completely via `slub_nomerge` would be overkill.
To efficiently prevent heap spraying, we propose the following approach:
to create multiple copies of generic slab caches that will never be
merged, and random one of them will be used at allocation. The random
selection is based on the address of code that calls `kmalloc()`, which
means it is static at runtime (rather than dynamically determined at
each time of allocation, which could be bypassed by repeatedly spraying
in brute force). In other words, the randomness of cache selection will
be with respect to the code address rather than time, i.e. allocations
in different code paths would most likely pick different caches,
although kmalloc() at each place would use the same cache copy whenever
it is executed. In this way, the vulnerable object and memory allocated
in other subsystems and modules will (most probably) be on different
slab caches, which prevents the object from being sprayed.
Meanwhile, the static random selection is further enhanced with a
per-boot random seed, which prevents the attacker from finding a usable
kmalloc that happens to pick the same cache with the vulnerable
subsystem/module by analyzing the open source code. In other words, with
the per-boot seed, the random selection is static during each time the
system starts and runs, but not across different system startups.
The overhead of performance has been tested on a 40-core x86 server by
comparing the results of `perf bench all` between the kernels with and
without this patch based on the latest linux-next kernel, which shows
minor difference. A subset of benchmarks are listed below:
sched/ sched/ syscall/ mem/ mem/
messaging pipe basic memcpy memset
(sec) (sec) (sec) (GB/sec) (GB/sec)
control1 0.019 5.459 0.733 15.258789 51.398026
control2 0.019 5.439 0.730 16.009221 48.828125
control3 0.019 5.282 0.735 16.009221 48.828125
control_avg 0.019 5.393 0.733 15.759077 49.684759
experiment1 0.019 5.374 0.741 15.500992 46.502976
experiment2 0.019 5.440 0.746 16.276042 51.398026
experiment3 0.019 5.242 0.752 15.258789 51.398026
experiment_avg 0.019 5.352 0.746 15.678608 49.766343
The overhead of memory usage was measured by executing `free` after boot
on a QEMU VM with 1GB total memory, and as expected, it's positively
correlated with # of cache copies:
control 4 copies 8 copies 16 copies
total 969.8M 968.2M 968.2M 968.2M
used 20.0M 21.9M 24.1M 26.7M
free 936.9M 933.6M 931.4M 928.6M
available 932.2M 928.8M 926.6M 923.9M
Co-developed-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Dennis Zhou <dennis@kernel.org> # percpu
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Russell King says:
====================
Remove some unused phylink legacy
I believe we are now in a position where some of the legacy phylink code
can be removed!
I believe that all DSA drivers do not make use of any pre-March 2020
phylink behaviour - all drivers now seem to set legacy_pre_march2020 to
false, and the conditions that DSA sets it to true are no longer
satisifed by any driver.
Moreover, no one uses the .mac_an_restart() method, so this can also be
removed.
====================
Link: https://lore.kernel.org/r/ZLERQ2OBrv44Ppyc@shell.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The mac_an_restart() method is now completely unused, and has been
superseded by phylink_pcs support. Remove this method.
Since phylink_pcs_mac_an_restart() now only deals with the PCS, rename
the function to remove the _mac infix.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since DSA no longer marks anything as phylink-legacy, there is now no
need for DSA drivers to set this member to false. Remove all instances
of this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All drivers are now updated for the March 2020 changes, and no longer
make use of the mac_pcs_get_state() or mac_an_restart() operations,
which are now NULL across all DSA drivers. All DSA drivers don't look
at speed, duplex, pause or advertisement in their phylink_mac_config()
method either.
Remove support for these operations from DSA, and stop marking DSA as
a legacy driver by default.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make use of of_get_ethdev_address() to support reading MAC address not
only from the usual DT nodes but also from an NVMEM provider (e.g. using
a dedicated area in an FRU EEPROM).
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/r/20230713095743.30517-1-fercerpav@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Set VPU G2 clock to 300MHz like described in documentation.
This fixes pixels error occurring with large resolution ( >= 2560x1600)
HEVC test stream when using the postprocessor to produce NV12.
Fixes: 4ac7e4a812 ("arm64: dts: imx8mq: Enable both G1 and G2 VPU's with vpu-blk-ctrl")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is the same approach as being used within imx8mp-blk-ctrl. This fixes
the lockdep warning about 'possible recursive locking detected' with the
following (reduced) backtrace:
genpd_lock_mtx+0x14/0x1c
genpd_runtime_resume+0x108/0x308
__rpm_callback+0x44/0x19c
rpm_callback+0x64/0x70
rpm_resume+0x438/0x6d8
__pm_runtime_resume+0x54/0xb0
imx93_blk_ctrl_power_on+0x100/0x294
_genpd_power_on+0x8c/0x16c
genpd_power_on.part.0+0xa0/0x1a0
__genpd_dev_pm_attach+0x14c/0x2e4
genpd_dev_pm_attach+0x58/0x64
dev_pm_domain_attach+0x1c/0x2c
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The reg size of etm nodes is incorrectly set to 64k instead of 4k. This
leads to a crash when calling amba_read_periphid(). After corrected reg
size, amba_read_periphid() retrieve the correct periphid.
arm,primecell-periphid were removed from the etm nodes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For SOMs with an onboard PHY, the RESET_N pull-up resistor is
currently deactivated in the pinmux configuration. When the pinmux
code selects the GPIO function for this pin, with a default direction
of input, this prevents the RESET_N pin from being taken to the proper
3.3V level (deasserted), and this results in the PHY being not
detected since it is held in reset.
Taken from RESET_N pin description in ADIN13000 datasheet:
This pin requires a 1K pull-up resistor to AVDD_3P3.
Activate the pull-up resistor to fix the issue.
Fixes: ade0176dd8 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module")
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When the RK3568 PCIe v3 PHY supported has been upstreamed, RK3588
support was included, but the DT binding does not reflect this.
This adds the missing bits.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230717173512.65169-2-sebastian.reichel@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Two entries are expected for PCIe ranges.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
DT bindings expect function in each pin state in the pin configuration:
sm8250-sony-xperia-edo-pdx203.dtb: pinctrl@f100000: cam-pwr-b-state: 'oneOf' conditional failed, one must be fixed:
'function' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230717210055.21979-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
commit c4a48b0df8 ("dt-bindings: pinctrl: qcom: tlmm should use
output-disable, not input-enable") the property is not accepted anymore:
sc8180x-primus.dtb: pinctrl@3100000: hall-int-active-state: 'oneOf' conditional failed, one must be fixed:
'bias-disable', 'function', 'input-enable', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230717210055.21979-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
i.MX93 and i.MX8ULP lpuart add some new featurs based on i.MX7ULP, for
example, i.MX93 and i.MX8ULP can support EOP(end-of-packet) function
while i.MX7ULP doesn't support, so add "fsl,imx8ulp-lpuart" compatible
string for i.MX93 to support those new features.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Drop the i.MX8DXL backwards compatibility with i.MX7ULP since they
differ from clocks handling point of view.
dtbs_check has the following warnings:
linux-next/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: serial@5a060000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx8qxp-lpuart', 'fsl,imx7ulp-lpuart'] is too long
'fsl,imx93-lpuart' was expected
'fsl,imx8qxp-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart']
'fsl,imxrt1050-lpuart' was expected
'fsl,imx8ulp-lpuart' was expected
'fsl,imx8qxp-lpuart' was expected
'fsl,imxrt1170-lpuart' was expected
From schema: linux-next/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add reserved memory node for rpmsg
Enable CM33 node with mailbox property included for doorbell.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8ULP relies remoteproc and rpmsg enabled to communicate with CM33
for boot purpose, because some boot related things are handled by
CM33.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
scl-gpios and sda-gpios need GPIO_OPEN_DRAIN flag, otherwise the
following run-time warning is seen:
gpio-144 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
gpio-146 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Kontron sl28 board is supported upstream and also tested in the
KernelCI. Enable support for its VPD EEPROM where the base ethernet
address is stored.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that it is finally possible to get the MAC addresses from the OTP
memory, use it to set the addresses of the network devices.
There are 8 reserved MAC addresses in total per board. Distribute them
as follows:
+----------+------+------+------+------+------+
| | var1 | var2 | var3 | var4 | kbox |
+----------+------+------+------+------+------+
| enetc #0 | +0 | | | +0 | +0 |
| enetc #1 | | | +0 | +1 | +1 |
| enetc #2 | | +2 | | | +2 |
| enetc #3 | | +3 | | | +3 |
| felix p0 | | +0 | | | +4 |
| felix p1 | | +1 | | | +5 |
| felix p2 | | | | | +6 |
| felix p3 | | | | | +7 |
| felix p4 | | | | | |
| felix p5 | | | | | |
+----------+------+------+------+------+------+
An empty cell means, the port is not available and thus doesn't need an
ethernet address.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set Pull Resistors Enable bit to put signal into a defined state.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add #address-cells and #size-cells properties to som_flash. This
enables correct parsing of added SPI NOR mtd partition child nodes that
are set in the bootloader.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Beacon Embedded imx8mm development kit has a DSI
to HDMI bridge chip. The bridge supports stereo audio
and hot-plugging.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The DSI to HDMI bridge uses the address currently assigned to
the camera, so change the camera address to the alternative
address of 0x10 in preparation to enable the bridge.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Beacon Embedded imx8mn development kit has a DSI
to HDMI bridge chip. The bridge supports stereo audio
and hot-plug detection.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When the call to btrfs_extract_ordered_extent in btrfs_dio_submit_io
fails to allocate memory for a new ordered_extent, it calls into the
btrfs_dio_end_io for error handling. btrfs_dio_end_io then assumes that
bbio->ordered is set because it is supposed to be at this point, except
for this error handling corner case. Try to not overload the
btrfs_dio_end_io with error handling of a bio in a non-canonical state,
and instead call btrfs_finish_ordered_extent and iomap_dio_bio_end_io
directly for this error case.
Reported-by: syzbot <syzbot+5b82f0e951f8c2bcdb8f@syzkaller.appspotmail.com>
Fixes: b41b6f6937 ("btrfs: use btrfs_finish_ordered_extent to complete direct writes")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: syzbot <syzbot+5b82f0e951f8c2bcdb8f@syzkaller.appspotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
While trying to get the subpage blocksize tests running, I hit the
following panic on generic/476
assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229
kernel BUG at fs/btrfs/subpage.c:229!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 1 PID: 1453 Comm: fsstress Not tainted 6.4.0-rc7+ #12
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20230301gitf80f052277c8-26.fc38 03/01/2023
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : btrfs_subpage_assert+0xbc/0xf0
lr : btrfs_subpage_assert+0xbc/0xf0
Call trace:
btrfs_subpage_assert+0xbc/0xf0
btrfs_subpage_clear_checked+0x38/0xc0
btrfs_page_clear_checked+0x48/0x98
btrfs_truncate_block+0x5d0/0x6a8
btrfs_cont_expand+0x5c/0x528
btrfs_write_check.isra.0+0xf8/0x150
btrfs_buffered_write+0xb4/0x760
btrfs_do_write_iter+0x2f8/0x4b0
btrfs_file_write_iter+0x1c/0x30
do_iter_readv_writev+0xc8/0x158
do_iter_write+0x9c/0x210
vfs_iter_write+0x24/0x40
iter_file_splice_write+0x224/0x390
direct_splice_actor+0x38/0x68
splice_direct_to_actor+0x12c/0x260
do_splice_direct+0x90/0xe8
generic_copy_file_range+0x50/0x90
vfs_copy_file_range+0x29c/0x470
__arm64_sys_copy_file_range+0xcc/0x498
invoke_syscall.constprop.0+0x80/0xd8
do_el0_svc+0x6c/0x168
el0_svc+0x50/0x1b0
el0t_64_sync_handler+0x114/0x120
el0t_64_sync+0x194/0x198
This happens because during btrfs_cont_expand we'll get a page, set it
as mapped, and if it's not Uptodate we'll read it. However between the
read and re-locking the page we could have called release_folio() on the
page, but left the page in the file mapping. release_folio() can clear
the page private, and thus further down we blow up when we go to modify
the subpage bits.
Fix this by putting the set_page_extent_mapped() after the read. This
is safe because read_folio() will call set_page_extent_mapped() before
it does the read, and then if we clear page private but leave it on the
mapping we're completely safe re-setting set_page_extent_mapped(). With
this patch I can now run generic/476 without panicing.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[REGRESSION]
Commit 75b4703329 ("btrfs: raid56: migrate recovery and scrub recovery
path to use error_bitmap") changed the behavior of scrub_rbio().
Initially if we have no error reading the raid bio, we will assign
@need_check to true, then finish_parity_scrub() would later verify the
content of P/Q stripes before writeback.
But after that commit we never verify the content of P/Q stripes and
just writeback them.
This can lead to unrepaired P/Q stripes during scrub, or already
corrupted P/Q copied to the dev-replace target.
[FIX]
The situation is more complex than the regression, in fact the initial
behavior is not 100% correct either.
If we have the following rare case, it can still lead to the same
problem using the old behavior:
0 16K 32K 48K 64K
Data 1: |IIIIIII| |
Data 2: | |
Parity: | |CCCCCCC| |
Where "I" means IO error, "C" means corruption.
In the above case, we're scrubbing the parity stripe, then read out all
the contents of Data 1, Data 2, Parity stripes.
But found IO error in Data 1, which leads to rebuild using Data 2 and
Parity and got the correct data.
In that case, we would not verify if the Parity is correct for range
[16K, 32K).
So here we have to always verify the content of Parity no matter if we
did recovery or not.
This patch would remove the @need_check parameter of
finish_parity_scrub() completely, and would always do the P/Q
verification before writeback.
Fixes: 75b4703329 ("btrfs: raid56: migrate recovery and scrub recovery path to use error_bitmap")
CC: stable@vger.kernel.org # 6.2+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Running delayed iputs, which never happens in an irq context, needs to
lock the spinlock fs_info->delayed_iput_lock. When finishing bios for
data writes (irq context, bio.c) we call btrfs_put_ordered_extent() which
needs to add a delayed iput and for that it needs to acquire the spinlock
fs_info->delayed_iput_lock. Without disabling irqs when running delayed
iputs we can therefore deadlock on that spinlock. The same deadlock can
also happen when adding an inode to the delayed iputs list, since this
can be done outside an irq context as well.
Syzbot recently reported this, which results in the following trace:
================================
WARNING: inconsistent lock state
6.4.0-syzkaller-09904-ga507db1d8fdc #0 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
btrfs-cleaner/16079 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff888107804d20 (&fs_info->delayed_iput_lock){+.?.}-{2:2}, at: spin_lock include/linux/spinlock.h:350 [inline]
ffff888107804d20 (&fs_info->delayed_iput_lock){+.?.}-{2:2}, at: btrfs_run_delayed_iputs+0x28/0xe0 fs/btrfs/inode.c:3523
{IN-SOFTIRQ-W} state was registered at:
lock_acquire kernel/locking/lockdep.c:5761 [inline]
lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5726
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:350 [inline]
btrfs_add_delayed_iput+0x128/0x390 fs/btrfs/inode.c:3490
btrfs_put_ordered_extent fs/btrfs/ordered-data.c:559 [inline]
btrfs_put_ordered_extent+0x2f6/0x610 fs/btrfs/ordered-data.c:547
__btrfs_bio_end_io fs/btrfs/bio.c:118 [inline]
__btrfs_bio_end_io+0x136/0x180 fs/btrfs/bio.c:112
btrfs_orig_bbio_end_io+0x86/0x2b0 fs/btrfs/bio.c:163
btrfs_simple_end_io+0x105/0x380 fs/btrfs/bio.c:378
bio_endio+0x589/0x690 block/bio.c:1617
req_bio_endio block/blk-mq.c:766 [inline]
blk_update_request+0x5c5/0x1620 block/blk-mq.c:911
blk_mq_end_request+0x59/0x680 block/blk-mq.c:1032
lo_complete_rq+0x1c6/0x280 drivers/block/loop.c:370
blk_complete_reqs+0xb3/0xf0 block/blk-mq.c:1110
__do_softirq+0x1d4/0x905 kernel/softirq.c:553
run_ksoftirqd kernel/softirq.c:921 [inline]
run_ksoftirqd+0x31/0x60 kernel/softirq.c:913
smpboot_thread_fn+0x659/0x9e0 kernel/smpboot.c:164
kthread+0x344/0x440 kernel/kthread.c:389
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
irq event stamp: 39
hardirqs last enabled at (39): [<ffffffff81d5ebc4>] __do_kmem_cache_free mm/slab.c:3558 [inline]
hardirqs last enabled at (39): [<ffffffff81d5ebc4>] kmem_cache_free mm/slab.c:3582 [inline]
hardirqs last enabled at (39): [<ffffffff81d5ebc4>] kmem_cache_free+0x244/0x370 mm/slab.c:3575
hardirqs last disabled at (38): [<ffffffff81d5eb5e>] __do_kmem_cache_free mm/slab.c:3553 [inline]
hardirqs last disabled at (38): [<ffffffff81d5eb5e>] kmem_cache_free mm/slab.c:3582 [inline]
hardirqs last disabled at (38): [<ffffffff81d5eb5e>] kmem_cache_free+0x1de/0x370 mm/slab.c:3575
softirqs last enabled at (0): [<ffffffff814ac99f>] copy_process+0x227f/0x75c0 kernel/fork.c:2448
softirqs last disabled at (0): [<0000000000000000>] 0x0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&fs_info->delayed_iput_lock);
<Interrupt>
lock(&fs_info->delayed_iput_lock);
*** DEADLOCK ***
1 lock held by btrfs-cleaner/16079:
#0: ffff888107804860 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: cleaner_kthread+0x103/0x4b0 fs/btrfs/disk-io.c:1463
stack backtrace:
CPU: 3 PID: 16079 Comm: btrfs-cleaner Not tainted 6.4.0-syzkaller-09904-ga507db1d8fdc #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_usage_bug kernel/locking/lockdep.c:3978 [inline]
valid_state kernel/locking/lockdep.c:4020 [inline]
mark_lock_irq kernel/locking/lockdep.c:4223 [inline]
mark_lock.part.0+0x1102/0x1960 kernel/locking/lockdep.c:4685
mark_lock kernel/locking/lockdep.c:4649 [inline]
mark_usage kernel/locking/lockdep.c:4598 [inline]
__lock_acquire+0x8e4/0x5e20 kernel/locking/lockdep.c:5098
lock_acquire kernel/locking/lockdep.c:5761 [inline]
lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5726
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:350 [inline]
btrfs_run_delayed_iputs+0x28/0xe0 fs/btrfs/inode.c:3523
cleaner_kthread+0x2e5/0x4b0 fs/btrfs/disk-io.c:1478
kthread+0x344/0x440 kernel/kthread.c:389
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
</TASK>
So fix this by using spin_lock_irq() and spin_unlock_irq() when running
delayed iputs, and using spin_lock_irqsave() and spin_unlock_irqrestore()
when adding a delayed iput().
Reported-by: syzbot+da501a04be5ff533b102@syzkaller.appspotmail.com
Fixes: ec63b84d46 ("btrfs: add an ordered_extent pointer to struct btrfs_bio")
Link: https://lore.kernel.org/linux-btrfs/000000000000d5c89a05ffbd39dd@google.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_orphan_cleanup(), if we can't find an inode (btrfs_iget() returns
an -ENOENT error pointer), we proceed with 'ret' set to -ENOENT and the
inode pointer set to ERR_PTR(-ENOENT). Later when we proceed to the body
of the following if statement:
if (ret == -ENOENT || inode->i_nlink) {
(...)
trans = btrfs_start_transaction(root, 1);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
iput(inode);
goto out;
}
(...)
ret = btrfs_del_orphan_item(trans, root,
found_key.objectid);
btrfs_end_transaction(trans);
if (ret) {
iput(inode);
goto out;
}
continue;
}
If we get an error from btrfs_start_transaction() or from the call to
btrfs_del_orphan_item() we end calling iput() against an inode pointer
that has a value of ERR_PTR(-ENOENT), resulting in a crash with the
following trace:
[876.667] BUG: kernel NULL pointer dereference, address: 0000000000000096
[876.667] #PF: supervisor read access in kernel mode
[876.667] #PF: error_code(0x0000) - not-present page
[876.667] PGD 0 P4D 0
[876.668] Oops: 0000 [#1] PREEMPT SMP PTI
[876.668] CPU: 0 PID: 2356187 Comm: mount Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1
[876.668] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[876.668] RIP: 0010:iput+0xa/0x20
[876.668] Code: ff ff ff 66 (...)
[876.669] RSP: 0018:ffffafa9c0c9f9d0 EFLAGS: 00010282
[876.669] RAX: ffffffffffffffe4 RBX: 000000000009453b RCX: 0000000000000000
[876.669] RDX: 0000000000000001 RSI: ffffafa9c0c9f930 RDI: fffffffffffffffe
[876.669] RBP: ffff95c612f3b800 R08: 0000000000000001 R09: ffffffffffffffe4
[876.670] R10: 00018f2a71010000 R11: 000000000ead96e3 R12: ffff95cb7d6909a0
[876.670] R13: fffffffffffffffe R14: ffff95c60f477000 R15: 00000000ffffffe4
[876.670] FS: 00007f5fbe30a840(0000) GS:ffff95ccdfa00000(0000) knlGS:0000000000000000
[876.670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[876.671] CR2: 0000000000000096 CR3: 000000055e9f6004 CR4: 0000000000370ef0
[876.671] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[876.671] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[876.672] Call Trace:
[876.744] <TASK>
[876.744] ? __die_body+0x1b/0x60
[876.744] ? page_fault_oops+0x15d/0x450
[876.745] ? __kmem_cache_alloc_node+0x47/0x410
[876.745] ? do_user_addr_fault+0x65/0x8a0
[876.745] ? exc_page_fault+0x74/0x170
[876.746] ? asm_exc_page_fault+0x22/0x30
[876.746] ? iput+0xa/0x20
[876.746] btrfs_orphan_cleanup+0x221/0x330 [btrfs]
[876.746] btrfs_lookup_dentry+0x58f/0x5f0 [btrfs]
[876.747] btrfs_lookup+0xe/0x30 [btrfs]
[876.747] __lookup_slow+0x82/0x130
[876.785] walk_component+0xe5/0x160
[876.786] path_lookupat.isra.0+0x6e/0x150
[876.786] filename_lookup+0xcf/0x1a0
[876.786] ? mod_objcg_state+0xd2/0x360
[876.786] ? obj_cgroup_charge+0xf5/0x110
[876.787] ? should_failslab+0xa/0x20
[876.787] ? kmem_cache_alloc+0x47/0x450
[876.787] vfs_path_lookup+0x51/0x90
[876.788] mount_subtree+0x8d/0x130
[876.788] btrfs_mount+0x149/0x410 [btrfs]
[876.788] ? __kmem_cache_alloc_node+0x47/0x410
[876.788] ? vfs_parse_fs_param+0xc0/0x110
[876.789] legacy_get_tree+0x24/0x50
[876.834] vfs_get_tree+0x22/0xd0
[876.852] path_mount+0x2d8/0x9c0
[876.852] do_mount+0x79/0x90
[876.852] __x64_sys_mount+0x8e/0xd0
[876.853] do_syscall_64+0x38/0x90
[876.899] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[876.958] RIP: 0033:0x7f5fbe50b76a
[876.959] Code: 48 8b 0d a9 (...)
[876.959] RSP: 002b:00007fff01925798 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
[876.959] RAX: ffffffffffffffda RBX: 00007f5fbe694264 RCX: 00007f5fbe50b76a
[876.960] RDX: 0000561bde6c8720 RSI: 0000561bde6bdec0 RDI: 0000561bde6c31a0
[876.960] RBP: 0000561bde6bdc70 R08: 0000000000000000 R09: 0000000000000001
[876.960] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[876.960] R13: 0000561bde6c31a0 R14: 0000561bde6c8720 R15: 0000561bde6bdc70
[876.960] </TASK>
So fix this by setting 'inode' to NULL whenever we get an error from
btrfs_iget(), and to make the code simpler, stop testing for 'ret' being
-ENOENT to check if we have an inode - instead test for 'inode' being NULL
or not. Having a NULL 'inode' prevents any iput() call from crashing, as
iput() ignores NULL inode pointers. Also, stop testing for a NULL return
value from btrfs_iget() with PTR_ERR_OR_ZERO(), because btrfs_iget() never
returns NULL - in case an inode is not found, it returns ERR_PTR(-ENOENT),
and in case of memory allocation failure, it returns ERR_PTR(-ENOMEM).
We also don't need the extra iput() calls on the error branches for the
btrfs_start_transaction() and btrfs_del_orphan_item() calls, as we have
already called iput() before, so remove them.
Fixes: a13bb2c038 ("btrfs: add missing iputs on orphan cleanup failure")
CC: stable@vger.kernel.org # 6.4
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_orphan_cleanup(), if we were able to find the inode, we do an
iput() on the inode, then if btrfs_drop_verity_items() succeeds and then
either btrfs_start_transaction() or btrfs_del_orphan_item() fail, we do
another iput() in the respective error paths, resulting in an extra iput()
on the inode.
Fix this by setting inode to NULL after the first iput(), as iput()
ignores a NULL inode pointer argument.
Fixes: a13bb2c038 ("btrfs: add missing iputs on orphan cleanup failure")
CC: stable@vger.kernel.org # 6.4
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At exclude_super_stripes(), if we happen to find a block group that has
super blocks mapped to it and we are on a zoned filesystem, we error out
as this is not supposed to happen, indicating either a bug or maybe some
memory corruption for example. However we are exiting the function without
freeing the memory allocated for the logical address of the super blocks.
Fix this by freeing the logical address.
Fixes: 12659251ca ("btrfs: implement log-structured superblock for ZONED mode")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
