Make it under CONFIG_CGROUP_SCHED to rid of __maybe_unused annotation.
And further fetch cgrp inside cgroup_extra_stat_show() directly to rid
of __maybe_unused annotation of cgrp. No functional change intended.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
err is assigned first, so it does not need to initialize the assignment.
Signed-off-by: Li zeming <zeming@nfschina.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
RISC-V has an extended form of mapping symbols that we use to encode
the ISA when it changes in the middle of an ELF. This trips up modpost
as a build failure, I haven't yet verified it yet but I believe the
kallsyms difference should result in stacks looking sane again.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/9d9e2902-5489-4bf0-d9cb-556c8e5d71c2@infradead.org/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The return value of cgroup_rm_cftypes_locked() is always 0. So remove
it to simplify the code. No functional change intended.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The vendor has introduced a new variant of silicon which is highly
similar to the existing IQS7222A, but with its independent sliders
essentially replaced with a single-contact trackpad.
Update the common driver to support this new device's register map
and report trackpad events. As with the IQS7222A, the new IQS7222D
can report both raw coordinates as well as gestures.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/ZKrpRh6RT6+6KrMQ@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Extend the common binding to include a new variant of the silicon,
which effectively replaces a pair of slider nodes with a trackpad
node comprising the same or similar properties.
As part of this change, the if/then/else schema have been updated
to identify properties that are not supported by the new device.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/ZKrpOdp+rM8gDekw@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The units assumed by the 'azoteq,top-speed', 'azoteq,bottom-speed'
and 'azoteq,gesture-dist' properties are unspecified; define them
according to the device's datasheet.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/ZKrpMekZBt95Gmnr@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If the device drops into ultra-low-power mode before being placed
into normal-power mode as part of ATI being triggered, the device
does not assert any interrupts until the ATI routine is restarted
two seconds later.
Solve this problem by adopting the vendor's recommendation, which
calls for the device to be placed into normal-power mode prior to
being configured and ATI being triggered.
The original implementation followed this sequence, but the order
was inadvertently changed as part of the resolution of a separate
erratum.
Fixes: 1e4189d8af ("Input: iqs7222 - protect volatile registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/ZKrpHc2Ji9qR25r2@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
devm_platform_get_and_ioremap_resource maps a resource and returns its
physical address. If we don't need the physical address, we should call
devm_platform_ioremap_resource instead.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230709134109.182418-1-martin@kaiser.cx
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently, SELinux doesn't allow distinguishing between kernel threads
and userspace processes that are started before the policy is first
loaded - both get the label corresponding to the kernel SID. The only
way a process that persists from early boot can get a meaningful label
is by doing a voluntary dyntransition or re-executing itself.
Reusing the kernel label for userspace processes is problematic for
several reasons:
1. The kernel is considered to be a privileged domain and generally
needs to have a wide range of permissions allowed to work correctly,
which prevents the policy writer from effectively hardening against
early boot processes that might remain running unintentionally after
the policy is loaded (they represent a potential extra attack surface
that should be mitigated).
2. Despite the kernel being treated as a privileged domain, the policy
writer may want to impose certain special limitations on kernel
threads that may conflict with the requirements of intentional early
boot processes. For example, it is a good hardening practice to limit
what executables the kernel can execute as usermode helpers and to
confine the resulting usermode helper processes. However, a
(legitimate) process surviving from early boot may need to execute a
different set of executables.
3. As currently implemented, overlayfs remembers the security context of
the process that created an overlayfs mount and uses it to bound
subsequent operations on files using this context. If an overlayfs
mount is created before the SELinux policy is loaded, these "mounter"
checks are made against the kernel context, which may clash with
restrictions on the kernel domain (see 2.).
To resolve this, introduce a new initial SID (reusing the slot of the
former "init" initial SID) that will be assigned to any userspace
process started before the policy is first loaded. This is easy to do,
as we can simply label any process that goes through the
bprm_creds_for_exec LSM hook with the new init-SID instead of
propagating the kernel SID from the parent.
To provide backwards compatibility for existing policies that are
unaware of this new semantic of the "init" initial SID, introduce a new
policy capability "userspace_initial_context" and set the "init" SID to
the same context as the "kernel" SID unless this capability is set by
the policy.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In the process of reverting back to directly accessing the global
selinux_state pointer we left behind some artifacts in the
selinux_policycap_XXX() helper functions. This patch cleans up
some of that left-behind cruft.
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently, evm_inode_init_security() processes a single LSM xattr from the
array passed by security_inode_init_security(), and calculates the HMAC on
it and other inode metadata.
As the LSM infrastructure now can pass to EVM an array with multiple
xattrs, scan them until the terminator (xattr name NULL), and calculate the
HMAC on all of them.
Also, double check that the xattrs array terminator is the first non-filled
slot (obtained with lsm_get_xattr_slot()). Consumers of the xattrs array,
such as the initxattrs() callbacks, rely on the terminator.
Finally, change the name of the lsm_xattr parameter of evm_init_hmac() to
xattrs, to reflect the new type of information passed.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Change the evm_inode_init_security() definition to align with the LSM
infrastructure. Keep the existing behavior of including in the HMAC
calculation only the first xattr provided by LSMs.
Changing the evm_inode_init_security() definition requires passing the
xattr array allocated by security_inode_init_security(), and the number of
xattrs filled by previously invoked LSMs.
Use the newly introduced lsm_get_xattr_slot() to position EVM correctly in
the xattrs array, like a regular LSM, and to increment the number of filled
slots. For now, the LSM infrastructure allocates enough xattrs slots to
store the EVM xattr, without using the reservation mechanism.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
With the newly added ability of LSMs to supply multiple xattrs, set
SMACK64TRASMUTE in smack_inode_init_security(), instead of d_instantiate().
Do it by incrementing SMACK_INODE_INIT_XATTRS to 2 and by calling
lsm_get_xattr_slot() a second time, if the transmuting conditions are met.
The LSM infrastructure passes all xattrs provided by LSMs to the
filesystems through the initxattrs() callback, so that filesystems can
store xattrs in the disk.
After the change, the SMK_INODE_TRANSMUTE inode flag is always set by
d_instantiate() after fetching SMACK64TRANSMUTE from the disk. Before it
was done by smack_inode_post_setxattr() as result of the __vfs_setxattr()
call.
Removing __vfs_setxattr() also prevents invalidating the EVM HMAC, by
adding a new xattr without checking and updating the existing HMAC.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently, the LSM infrastructure supports only one LSM providing an xattr
and EVM calculating the HMAC on that xattr, plus other inode metadata.
Allow all LSMs to provide one or multiple xattrs, by extending the security
blob reservation mechanism. Introduce the new lbs_xattr_count field of the
lsm_blob_sizes structure, so that each LSM can specify how many xattrs it
needs, and the LSM infrastructure knows how many xattr slots it should
allocate.
Modify the inode_init_security hook definition, by passing the full
xattr array allocated in security_inode_init_security(), and the current
number of xattr slots in that array filled by LSMs. The first parameter
would allow EVM to access and calculate the HMAC on xattrs supplied by
other LSMs, the second to not leave gaps in the xattr array, when an LSM
requested but did not provide xattrs (e.g. if it is not initialized).
Introduce lsm_get_xattr_slot(), which LSMs can call as many times as the
number specified in the lbs_xattr_count field of the lsm_blob_sizes
structure. During each call, lsm_get_xattr_slot() increments the number of
filled xattrs, so that at the next invocation it returns the next xattr
slot to fill.
Cleanup security_inode_init_security(). Unify the !initxattrs and
initxattrs case by simply not allocating the new_xattrs array in the
former. Update the documentation to reflect the changes, and fix the
description of the xattr name, as it is not allocated anymore.
Adapt both SELinux and Smack to use the new definition of the
inode_init_security hook, and to call lsm_get_xattr_slot() to obtain and
fill the reserved slots in the xattr array.
Move the xattr->name assignment after the xattr->value one, so that it is
done only in case of successful memory allocation.
Finally, change the default return value of the inode_init_security hook
from zero to -EOPNOTSUPP, so that BPF LSM correctly follows the hook
conventions.
Reported-by: Nicolas Bouchinet <nicolas.bouchinet@clip-os.org>
Link: https://lore.kernel.org/linux-integrity/Y1FTSIo+1x+4X0LS@archlinux/
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: minor comment and variable tweaks, approved by RS]
Signed-off-by: Paul Moore <paul@paul-moore.com>
In the description of function definition security_file_lock(),
the line "@cmd: fnctl command" has a typo where "fnctl" should be
"fcntl". This patch fixes the typo.
Signed-off-by: Pairman Guo <pairmanxlr@gmail.com>
[PM: commit message cleanup]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230710154932.68377-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of if-else-if, simply call roundup_pow_of_two(BITS_PER_BYTES()).
Note, there is no division assumed as compiler may optimize it away.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230710154932.68377-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor spi_register_controller() to drop duplicate IDR allocation.
Instead of if-else-if branching use two sequential if:s, which allows
to re-use the logic of IDR allocation in all cases.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230710154932.68377-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the couple of places the NULL check of OF node is implied by the call
that takes it as a parameter. Drop the respective duplicate checks.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230710154932.68377-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
return values in crypto/asymmetric_keys/public_key.
-----BEGIN PGP SIGNATURE-----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=oojR
-----END PGP SIGNATURE-----
Merge tag 'v6.5-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a couple of regressions in af_alg and incorrect return values in
crypto/asymmetric_keys/public_key"
* tag 'v6.5-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: algif_hash - Fix race between MORE and non-MORE sends
KEYS: asymmetric: Fix error codes
crypto: af_alg - Fix merging of written data into spliced pages
ACPICA commit f16a0b4d0f0edd7b78a332fcf507be2187fac21e
Version 20230628.
Link: f16a0b4d
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 2eded5a6a13d892b7dc3be6096e7b1e8d4407600
Update RHCT table with below details.
1) Add additional structure to describe the Cache Management
Operation (CMO) related information.
2) Add structure to describe MMU type.
3) Convert the current reserved field to flags and define
a flag to indicate timer capability.
This codefirst ECR is approved by UEFI forum and will
be part of next ACPI spec version.
Link: 2eded5a6
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8c048cee4ea7b9ded8db3e1b3b9c14e21e084a2c
This adds 3 different external interrupt controller
definitions in MADT for RISC-V.
1) RISC-V PLIC is a platform interrupt controller for
handling wired interrupt in a RISC-V systems.
2) RISC-V IMSIC is MSI interrupt controller to
support MSI interrupts.
3) RISC-V APLIC has dual functionality. First it can
act like PLIC and direct all wired interrupts to
the CPU which doesn't have MSI controller. Second,
when the CPU has MSI controller (IMSIC), it will
act as a converter from wired interrupts to MSI.
Update the existing RINTC structure also to support
these external interrupt controllers.
This codefirst ECR is approved by UEFI forum and will
be part of next ACPI spec version.
Link: 8c048cee
Signed-off-by: Haibo, Xu <haibo1.xu@intel.com>
Co-developed-by: Haibo, Xu <haibo1.xu@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 90310989a0790032f5a0140741ff09b545af4bc5
According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode.
When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed.
=============================================================
UBSAN: array-index-out-of-bounds in acpica/dswexec.c:401:12 index -1 is out of range for type 'union acpi_operand_object *[9]'
CPU: 37 PID: 1678 Comm: cat Not tainted
6.0.0-dev-th500-6.0.y-1+bcf8c46459e407-generic-64k
HW name: NVIDIA BIOS v1.1.1-d7acbfc-dirty 12/19/2022 Call trace:
dump_backtrace+0xe0/0x130
show_stack+0x20/0x60
dump_stack_lvl+0x68/0x84
dump_stack+0x18/0x34
ubsan_epilogue+0x10/0x50
__ubsan_handle_out_of_bounds+0x80/0x90
acpi_ds_exec_end_op+0x1bc/0x6d8
acpi_ps_parse_loop+0x57c/0x618
acpi_ps_parse_aml+0x1e0/0x4b4
acpi_ps_execute_method+0x24c/0x2b8
acpi_ns_evaluate+0x3a8/0x4bc
acpi_evaluate_object+0x15c/0x37c
acpi_evaluate_integer+0x54/0x15c
show_power+0x8c/0x12c [acpi_power_meter]
Link: 90310989
Signed-off-by: Abhishek Mainkar <abmainkar@nvidia.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit be56820b03d8aeabfa6709c4d99bf1711afe7ef1
Replace magic number with a define. Linux kernel code will utilize this
define.
Link: be56820b
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 3a9dbc5cb1573b87a16b50918977ab9e53e24408
'object' is known to be NULL at this point. There is little value to log
it twice in the error message.
Link: 3a9dbc5c
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 32a50922b66a9e288b9a9b4740de86a542668a43
ACPI_CEDT_DSMAS_NON_VOLATILE -> ACPI_CDAT_DSMAS_NON_VOLATILE
Link: 32a50922
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit ef7cf185a046d76119b631f16e7c991543c80edc
This commit add the Interrupt command to acpiexec.
The Interrupt command simulates an interrupt with a int_ID (GSIV)
equal to the first argument of the call.
The acpiexec code simulates the behaviour by OSPM: execute the _EVT
method of the GED device associated with that int_ID.
Link: ef7cf185
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit dc6fd1d12903015726a8a6f87f63e86141576a68
The GED device is described by a _HID of ACPI0013.
This code traverses the namespace identifying all GED devices.
For each GED device in the namespace we record 1) the Interrupt objects
and the _EVT method.
This information is used when an interrupt is simulate.
Link: dc6fd1d1
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As per NVMe command set specification 1.0c Storage tag size is 7 bits.
Fixes: 4020aad85c ("nvme: add support for enhanced metadata")
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The insertion of an empty frame was introduced with
commit db0b124f02 ("igc: Enhance Qbv scheduling by using first flag bit")
in order to ensure that the current cycle has at least one packet if
there is some packet to be scheduled for the next cycle.
However, the current implementation does not properly check if
a packet is already scheduled for the current cycle. Currently,
an empty packet is always inserted if and only if
txtime >= end_of_cycle && txtime > last_tx_cycle
but since last_tx_cycle is always either the end of the current
cycle (end_of_cycle) or the end of a previous cycle, the
second part (txtime > last_tx_cycle) is always true unless
txtime == last_tx_cycle.
What actually needs to be checked here is if the last_tx_cycle
was already written within the current cycle, so an empty frame
should only be inserted if and only if
txtime >= end_of_cycle && end_of_cycle > last_tx_cycle.
This patch does not only avoid an unnecessary insertion, but it
can actually be harmful to insert an empty packet if packets
are already scheduled in the current cycle, because it can lead
to a situation where the empty packet is actually processed
as the first packet in the upcoming cycle shifting the packet
with the first_flag even one cycle into the future, finally leading
to a TX hang.
The TX hang can be reproduced on a i225 with:
sudo tc qdisc replace dev enp1s0 parent root handle 100 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x1 \
txtime-delay 500000 \
clockid CLOCK_TAI
sudo tc qdisc replace dev enp1s0 parent 100:1 etf \
clockid CLOCK_TAI \
delta 500000 \
offload \
skip_sock_check
and traffic generator
sudo trafgen -i traffic.cfg -o enp1s0 --cpp -n0 -q -t1400ns
with traffic.cfg
#define ETH_P_IP 0x0800
{
/* Ethernet Header */
0x30, 0x1f, 0x9a, 0xd0, 0xf0, 0x0e, # MAC Dest - adapt as needed
0x24, 0x5e, 0xbe, 0x57, 0x2e, 0x36, # MAC Src - adapt as needed
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 48, 1, # IP Src - adapt as needed
10, 0, 48, 10, # IP Dest - adapt as needed
const16(5555), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
and the observed message with that is for example
igc 0000:01:00.0 enp1s0: Detected Tx Unit Hang
Tx Queue <0>
TDH <32>
TDT <3c>
next_to_use <3c>
next_to_clean <32>
buffer_info[next_to_clean]
time_stamp <ffff26a8>
next_to_watch <00000000632a1828>
jiffies <ffff27f8>
desc.status <1048000>
Fixes: db0b124f02 ("igc: Enhance Qbv scheduling by using first flag bit")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It is possible (verified on a running system) that frames are processed
by igc_tx_launchtime with a txtime before the start of the cycle
(baset_est).
However, the result of txtime - baset_est is written into a u32,
leading to a wrap around to a positive number. The following
launchtime > 0 check will only branch to executing launchtime = 0
if launchtime is already 0.
Fix it by using a s32 before checking launchtime > 0.
Fixes: db0b124f02 ("igc: Enhance Qbv scheduling by using first flag bit")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The flags IGC_TXQCTL_STRICT_CYCLE and IGC_TXQCTL_STRICT_END
prevent the packet transmission over slot and cycle boundaries.
This is important for taprio offload where the slots and
cycles correspond to the slots and cycles configured for the
network.
However, the Qbv offload feature of the i225 is also used for
enabling TX launchtime / ETF offload. In that case, however,
the cycle has no meaning for the network and is only used
internally to adapt the base time register after a second has
passed.
Enabling strict mode in this case would unnecessarily prevent
the transmission of certain packets (i.e. at the boundary of a
second) and thus interferes with the ETF qdisc that promises
transmission at a certain point in time.
Similar to ETF, this also applies to CBS offload that also should
not be influenced by strict mode unless taprio offload would be
enabled at the same time.
This fully reverts
commit d8f45be01d ("igc: Use strict cycles for Qbv scheduling")
but its commit message only describes what was already implemented
before that commit. The difference to a plain revert of that commit
is that it now copes with the base_time = 0 case that was fixed with
commit e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
In particular, enabling strict mode leads to TX hang situations
under high traffic if taprio is applied WITHOUT taprio offload
but WITH ETF offload, e.g. as in
sudo tc qdisc replace dev enp1s0 parent root handle 100 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x1 \
txtime-delay 500000 \
clockid CLOCK_TAI
sudo tc qdisc replace dev enp1s0 parent 100:1 etf \
clockid CLOCK_TAI \
delta 500000 \
offload \
skip_sock_check
and traffic generator
sudo trafgen -i traffic.cfg -o enp1s0 --cpp -n0 -q -t1400ns
with traffic.cfg
#define ETH_P_IP 0x0800
{
/* Ethernet Header */
0x30, 0x1f, 0x9a, 0xd0, 0xf0, 0x0e, # MAC Dest - adapt as needed
0x24, 0x5e, 0xbe, 0x57, 0x2e, 0x36, # MAC Src - adapt as needed
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 48, 1, # IP Src - adapt as needed
10, 0, 48, 10, # IP Dest - adapt as needed
const16(5555), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
and the observed message with that is for example
igc 0000:01:00.0 enp1s0: Detected Tx Unit Hang
Tx Queue <0>
TDH <d0>
TDT <f0>
next_to_use <f0>
next_to_clean <d0>
buffer_info[next_to_clean]
time_stamp <ffff661f>
next_to_watch <00000000245a4efb>
jiffies <ffff6e48>
desc.status <1048000>
Fixes: d8f45be01d ("igc: Use strict cycles for Qbv scheduling")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
it is assigned first, so it does not need to initialize the assignment.
Link: https://lore.kernel.org/all/20230711185353.3218-1-zeming@nfschina.com/
Signed-off-by: Li zeming <zeming@nfschina.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The 'correct_ret_addr' pointer is always set in the later code, no need
to initialize it at definition time.
Link: https://lore.kernel.org/all/20230704194359.3124-1-zeming@nfschina.com/
Signed-off-by: Li zeming <zeming@nfschina.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Replace occurences of the pattern "PAGE_SHIFT - 9" in the passthru and
loop targets with PAGE_SECTORS_SHIFT.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The enable_trace_eprobe() function enables all event probes, attached
to given trace probe. If an error occurs in enabling one of the event
probes, all others should be roll backed. There is a bug in that roll
back logic - instead of all event probes, only the failed one is
disabled.
Link: https://lore.kernel.org/all/20230703042853.1427493-1-tz.stoyanov@gmail.com/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add the quirk as SM953 is reporting bogus namespace ID.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217593
Reported-by: Clemens Springsguth <cspringsguth@gmail.com>
Tested-by: Clemens Springsguth <cspringsguth@gmail.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Since commit e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
it is possible to enable taprio offload with a basetime of 0.
However, the check if taprio offload is already enabled (and thus -EALREADY
should be returned for igc_save_qbv_schedule) still relied on
adapter->base_time > 0.
This can be reproduced as follows:
# TAPRIO offload (flags == 0x2) and base-time = 0
sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x2
# The second call should fail with "Error: Device failed to setup taprio offload."
# But that only happens if base-time was != 0
sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x2
Fixes: e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Only set adapter->taprio_offload_enable after validating the arguments.
Otherwise, it stays set even if the offload was not enabled.
Since the subsequent code does not get executed in case of invalid
arguments, it will not be read at first.
However, by activating and then deactivating another offload
(e.g. ETF/TX launchtime offload), taprio_offload_enable is read
and erroneously keeps the offload feature of the NIC enabled.
This can be reproduced as follows:
# TAPRIO offload (flags == 0x2) and negative base-time leading to expected -ERANGE
sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time -1000 \
sched-entry S 01 300000 \
flags 0x2
# IGC_TQAVCTRL is 0x0 as expected (iomem=relaxed for reading register)
sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1
# Activate ETF offload
sudo tc qdisc replace dev enp1s0 parent root handle 6666 mqprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
hw 0
sudo tc qdisc add dev enp1s0 parent 6666:1 etf \
clockid CLOCK_TAI \
delta 500000 \
offload
# IGC_TQAVCTRL is 0x9 as expected
sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1
# Deactivate ETF offload again
sudo tc qdisc delete dev enp1s0 parent 6666:1
# IGC_TQAVCTRL should now be 0x0 again, but is observed as 0x9
sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1
Fixes: e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In the current implementation the flags adapter->qbv_enable
and IGC_FLAG_TSN_QBV_ENABLED have a similar name, but do not
have the same meaning. The first one is used only to indicate
taprio offload (i.e. when igc_save_qbv_schedule was called),
while the second one corresponds to the Qbv mode of the hardware.
However, the second one is also used to support the TX launchtime
feature, i.e. ETF qdisc offload. This leads to situations where
adapter->qbv_enable is false, but the flag IGC_FLAG_TSN_QBV_ENABLED
is set. This is prone to confusion.
The rename should reduce this confusion. Since it is a pure
rename, it has no impact on functionality.
Fixes: e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If defer close timeout value is set to 0, then there is no
need to include files in the deferred close list and utilize
the delayed worker for closing. Instead, we can close them
immediately.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
