This patch fixes an incorrect assumption made in the original
bpf_refcount series [0], specifically that the BPF program calling
bpf_refcount_acquire on some node can always guarantee that the node is
alive. In that series, the patch adding failure behavior to rbtree_add
and list_push_{front, back} breaks this assumption for non-owning
references.
Consider the following program:
n = bpf_kptr_xchg(&mapval, NULL);
/* skip error checking */
bpf_spin_lock(&l);
if(bpf_rbtree_add(&t, &n->rb, less)) {
bpf_refcount_acquire(n);
/* Failed to add, do something else with the node */
}
bpf_spin_unlock(&l);
It's incorrect to assume that bpf_refcount_acquire will always succeed in this
scenario. bpf_refcount_acquire is being called in a critical section
here, but the lock being held is associated with rbtree t, which isn't
necessarily the lock associated with the tree that the node is already
in. So after bpf_rbtree_add fails to add the node and calls bpf_obj_drop
in it, the program has no ownership of the node's lifetime. Therefore
the node's refcount can be decr'd to 0 at any time after the failing
rbtree_add. If this happens before the refcount_acquire above, the node
might be free'd, and regardless refcount_acquire will be incrementing a
0 refcount.
Later patches in the series exercise this scenario, resulting in the
expected complaint from the kernel (without this patch's changes):
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 207 at lib/refcount.c:25 refcount_warn_saturate+0xbc/0x110
Modules linked in: bpf_testmod(O)
CPU: 1 PID: 207 Comm: test_progs Tainted: G O 6.3.0-rc7-02231-g723de1a718a2-dirty #371
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0xbc/0x110
Code: 6f 64 f6 02 01 e8 84 a3 5c ff 0f 0b eb 9d 80 3d 5e 64 f6 02 00 75 94 48 c7 c7 e0 13 d2 82 c6 05 4e 64 f6 02 01 e8 64 a3 5c ff <0f> 0b e9 7a ff ff ff 80 3d 38 64 f6 02 00 0f 85 6d ff ff ff 48 c7
RSP: 0018:ffff88810b9179b0 EFLAGS: 00010082
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000202 RSI: 0000000000000008 RDI: ffffffff857c3680
RBP: ffff88810027d3c0 R08: ffffffff8125f2a4 R09: ffff88810b9176e7
R10: ffffed1021722edc R11: 746e756f63666572 R12: ffff88810027d388
R13: ffff88810027d3c0 R14: ffffc900005fe030 R15: ffffc900005fe048
FS: 00007fee0584a700(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005634a96f6c58 CR3: 0000000108ce9002 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
bpf_refcount_acquire_impl+0xb5/0xc0
(rest of output snipped)
The patch addresses this by changing bpf_refcount_acquire_impl to use
refcount_inc_not_zero instead of refcount_inc and marking
bpf_refcount_acquire KF_RET_NULL.
For owning references, though, we know the above scenario is not possible
and thus that bpf_refcount_acquire will always succeed. Some verifier
bookkeeping is added to track "is input owning ref?" for bpf_refcount_acquire
calls and return false from is_kfunc_ret_null for bpf_refcount_acquire on
owning refs despite it being marked KF_RET_NULL.
Existing selftests using bpf_refcount_acquire are modified where
necessary to NULL-check its return value.
[0]: https://lore.kernel.org/bpf/20230415201811.343116-1-davemarchevsky@fb.com/
Fixes: d2dcc67df9 ("bpf: Migrate bpf_rbtree_add and bpf_list_push_{front,back} to possibly fail")
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230602022647.1571784-5-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given the pointer to struct bpf_{rb,list}_node within a local kptr and
the byte offset of that field within the kptr struct, the calculation changed
by this patch is meant to find the beginning of the kptr so that it can
be passed to bpf_obj_drop.
Unfortunately instead of doing
ptr_to_kptr = ptr_to_node_field - offset_bytes
the calculation is erroneously doing
ptr_to_ktpr = ptr_to_node_field - (offset_bytes * sizeof(struct bpf_rb_node))
or the bpf_list_node equivalent.
This patch fixes the calculation.
Fixes: d2dcc67df9 ("bpf: Migrate bpf_rbtree_add and bpf_list_push_{front,back} to possibly fail")
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230602022647.1571784-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In verifier.c, fixup_kfunc_call uses struct bpf_insn_aux_data's
kptr_struct_meta field to pass information about local kptr types to
various helpers and kfuncs at runtime. The recent bpf_refcount series
added a few functions to the set that need this information:
* bpf_refcount_acquire
* Needs to know where the refcount field is in order to increment
* Graph collection insert kfuncs: bpf_rbtree_add, bpf_list_push_{front,back}
* Were migrated to possibly fail by the bpf_refcount series. If
insert fails, the input node is bpf_obj_drop'd. bpf_obj_drop needs
the kptr_struct_meta in order to decr refcount and properly free
special fields.
Unfortunately the verifier handling of collection insert kfuncs was not
modified to actually populate kptr_struct_meta. Accordingly, when the
node input to those kfuncs is passed to bpf_obj_drop, it is done so
without the information necessary to decr refcount.
This patch fixes the issue by populating kptr_struct_meta for those
kfuncs.
Fixes: d2dcc67df9 ("bpf: Migrate bpf_rbtree_add and bpf_list_push_{front,back} to possibly fail")
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230602022647.1571784-3-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It seems we forgot the normal case to terminate the retry loop,
making us asking 3 times each command, which is probably a little bit
too much.
And remove the ugly "goto exit" that can be replaced by a simpler "break"
Fixes: 586e8fede7 ("HID: logitech-hidpp: Retry commands when device is busy")
Suggested-by: Mark Lord <mlord@pobox.com>
Tested-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix all kernel-doc warnings in rdmacg:
kernel/cgroup/rdma.c:209: warning: Function parameter or member 'cg'
not described in 'rdmacg_uncharge_hierarchy'
kernel/cgroup/rdma.c:230: warning: Function parameter or member 'cg'
not described in 'rdmacg_uncharge'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We will release the refcnt of cgroup via cgroup_put, for example
in the cgroup_lock_and_drain_offline function, so replace css_get
with the cgroup_get function for better readability.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fix comment for vcpu ioctl version of KVM_ENABLE_CAP.
KVM provides ioctl KVM_ENABLE_CAP to allow userspace to enable an
extension which is not enabled by default. For vcpu ioctl version,
it is available with the capability KVM_CAP_ENABLE_CAP. For vm ioctl
version, it is available with the capability KVM_CAP_ENABLE_CAP_VM.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://lore.kernel.org/r/20230518091339.1102-2-binbin.wu@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
for_each_e_css() is unused now. Remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The responsiveness of the Per Entity Load Tracking (PELT) util_avg in
mobile devices is still considered too low for utilization changes
during task ramp-up.
In Android this manifests in the fact that the first frames of a UI
activity are very prone to be jankframes (a frame which doesn't meet
the required frame rendering time, e.g. 16ms@60Hz) since the CPU
frequency is normally low at this point and has to ramp up quickly.
The beginning of an UI activity is also characterized by the occurrence
of CPU contention, especially on little CPUs. Current little CPUs can
have an original CPU capacity of only ~ 150 which means that the actual
CPU capacity at lower frequency can even be much smaller.
Schedutil maps CPU util_avg into CPU frequency request via:
util = effective_cpu_util(..., cpu_util_cfs(cpu), ...) ->
util = map_util_perf(util) -> freq = map_util_freq(util, ...)
CPU contention for CFS tasks can be detected by 'CPU runnable > CPU
utililization' in cpu_util_cfs_boost() -> cpu_util(..., boost = 1).
Schedutil uses 'runnable boosting' by calling cpu_util_cfs_boost().
To be in sync with schedutil's CPU frequency selection, Energy Aware
Scheduling (EAS) also calls cpu_util(..., boost = 1) during max util
detection.
Moreover, 'runnable boosting' is also used in load-balance for busiest
CPU selection when the migration type is 'migrate_util', i.e. only at
sched domains which don't have the SD_SHARE_PKG_RESOURCES flag set.
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230515115735.296329-3-dietmar.eggemann@arm.com
There is a lot of code duplication in cpu_util_next() & cpu_util_cfs().
Remove this by allowing cpu_util_next() to be called with p = NULL.
Rename cpu_util_next() to cpu_util() since the '_next' suffix is no
longer necessary to distinct cpu utilization related functions.
Implement cpu_util_cfs(cpu) as cpu_util(cpu, p = NULL, -1).
This will allow to code future related cpu util changes only in one
place, namely in cpu_util().
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230515115735.296329-2-dietmar.eggemann@arm.com
With the introduction of local_clock_noinstr(), local_clock() itself
is no longer marked noinstr, use the correct function.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102716.045980863@infradead.org
Now that all ARCH_WANTS_NO_INSTR architectures (arm64, loongarch,
s390, x86) provide sched_clock_noinstr(), use this to provide
local_clock_noinstr().
This local_clock_noinstr() will be safe to use from noinstr code with
the assumption that any such noinstr code is non-preemptible (it had
better be, entry code will have IRQs disabled while __cpuidle must
have preemption disabled).
Specifically, preempt_enable_notrace(), a common part of many a
sched_clock() implementation calls out to schedule() -- even though,
per the above, it will never trigger -- which frustrates noinstr
validation.
vmlinux.o: warning: objtool: local_clock+0xb5: call to preempt_schedule_notrace_thunk() leaves .noinstr.text section
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.978624636@infradead.org
With the intent to provide local_clock_noinstr(), a variant of
local_clock() that's safe to be called from noinstr code (with the
assumption that any such code will already be non-preemptible),
prepare for things by providing a noinstr sched_clock_noinstr()
function.
Specifically, preempt_enable_*() calls out to schedule(), which upsets
noinstr validation efforts.
vmlinux.o: warning: objtool: native_sched_clock+0x96: call to preempt_schedule_notrace_thunk() leaves .noinstr.text section
vmlinux.o: warning: objtool: kvm_clock_read+0x22: call to preempt_schedule_notrace_thunk() leaves .noinstr.text section
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.910937674@infradead.org
With the intent to provide local_clock_noinstr(), a variant of
local_clock() that's safe to be called from noinstr code (with the
assumption that any such code will already be non-preemptible),
prepare for things by making the Hyper-V TSC and MSR sched_clock
implementations noinstr.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.843039089@infradead.org
Currently hv_read_tsc_page_tsc() (ab)uses the (valid) time value of
U64_MAX as an error return. This breaks the clean wrap-around of the
clock.
Modify the function signature to return a boolean state and provide
another u64 pointer to store the actual time on success. This obviates
the need to steal one time value and restores the full counter width.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.775630881@infradead.org
Because of how the virtual clocks use U64_MAX as an exception value
instead of a valid time, the clocks can no longer be assumed to wrap
cleanly. This is then compounded by arch_vdso_cycles_ok() rejecting
everything with the MSB/Sign-bit set.
Therefore, the effective mask becomes S64_MAX, and the comment with
vdso_calc_delta() that states the mask is U64_MAX and isn't optimized
out is just plain silly.
Now, the code has a negative filter -- to deal with TSC wobbles:
if (cycles > last)
which is just plain wrong, because it should've been written as:
if ((s64)(cycles - last) > 0)
to take wrapping into account, but per all the above, we don't
actually wrap on u64 anymore.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.704767397@infradead.org
In order to prevent the following complaint from happening, always
inline the u128 variant of mul_u64_u64_shr() -- which is what x86_64
will use.
vmlinux.o: warning: objtool: read_hv_sched_clock_tsc+0x5a: call to mul_u64_u64_shr.constprop.0() leaves .noinstr.text section
It should compile into something like:
asm("mul %[mul];"
"shrd %rdx, %rax, %cl"
: "+&a" (a)
: "c" shift, [mul] "r" (mul)
: "d");
Which is silly not to inline, but it happens.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.637420396@infradead.org
With the intent to provide local_clock_noinstr(), a variant of
local_clock() that's safe to be called from noinstr code (with the
assumption that any such code will already be non-preemptible),
prepare for things by providing a noinstr sched_clock_noinstr()
function.
Specifically, preempt_enable_*() calls out to schedule(), which upsets
noinstr validation efforts.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.570170436@infradead.org
With the intent to provide local_clock_noinstr(), a variant of
local_clock() that's safe to be called from noinstr code (with the
assumption that any such code will already be non-preemptible),
prepare for things by providing a noinstr sched_clock_read() function.
Specifically, preempt_enable_*() calls out to schedule(), which upsets
noinstr validation efforts.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.502547082@infradead.org
With the intent to provide local_clock_noinstr(), a variant of
local_clock() that's safe to be called from noinstr code (with the
assumption that any such code will already be non-preemptible),
prepare for things by providing a noinstr sched_clock_read() function.
Specifically, preempt_enable_*() calls out to schedule(), which upsets
noinstr validation efforts.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.435618812@infradead.org
The next patch will want to use __raw_readl() from a noinstr section
and as such that needs to be marked __always_inline to avoid the
compiler being a silly bugger.
Turns out it already is, but its siblings are not. Finish the work
started in commit e43f1331e2 ("arm64: Ask the compiler to
__always_inline functions used by KVM at HYP") for consistenies sake.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.368919762@infradead.org
With the intent to provide local_clock_noinstr(), a variant of
local_clock() that's safe to be called from noinstr code (with the
assumption that any such code will already be non-preemptible),
prepare for things by providing a noinstr sched_clock_noinstr() function.
Specifically, preempt_enable_*() calls out to schedule(), which upsets
noinstr validation efforts.
As such, pull out the preempt_{dis,en}able_notrace() requirements from
the sched_clock_read() implementations by explicitly providing it in
the sched_clock() function.
This further requires said sched_clock_read() functions to be noinstr
themselves, for ARCH_WANTS_NO_INSTR users. See the next few patches.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.302350330@infradead.org
The read side of seqcount_latch consists of:
do {
seq = raw_read_seqcount_latch(&latch->seq);
...
} while (read_seqcount_latch_retry(&latch->seq, seq));
which is asymmetric in the raw_ department, and sure enough,
read_seqcount_latch_retry() includes (explicit) instrumentation where
raw_read_seqcount_latch() does not.
This inconsistency becomes a problem when trying to use it from
noinstr code. As such, fix it by renaming and re-implementing
raw_read_seqcount_latch_retry() without the instrumentation.
Specifically the instrumentation in question is kcsan_atomic_next(0)
in do___read_seqcount_retry(). Loosing this annotation is not a
problem because raw_read_seqcount_latch() does not pass through
kcsan_atomic_next(KCSAN_SEQLOCK_REGION_MAX).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.233598176@infradead.org
With the introduction of task_struct::saved_state in commit
5f220be214 ("sched/wakeup: Prepare for RT sleeping spin/rwlocks")
matching the task state has gotten more complicated. That same commit
changed try_to_wake_up() to consider both states, but
wait_task_inactive() has been neglected.
Sebastian noted that the wait_task_inactive() usage in
ptrace_check_attach() can misbehave when ptrace_stop() is blocked on
the tasklist_lock after it sets TASK_TRACED.
Therefore extract a common helper from ttwu_state_match() and use that
to teach wait_task_inactive() about the PREEMPT_RT locks.
Originally-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20230601091234.GW83892@hirez.programming.kicks-ass.net
While modifying wait_task_inactive() for PREEMPT_RT; the build robot
noted that UP got broken. This led to audit and consideration of the
UP implementation of wait_task_inactive().
It looks like the UP implementation is also broken for PREEMPT;
consider task_current_syscall() getting preempted between the two
calls to wait_task_inactive().
Therefore move the wait_task_inactive() implementation out of
CONFIG_SMP and unconditionally use it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230602103731.GA630648%40hirez.programming.kicks-ass.net
We've run into the case that the balancer tries to balance a migration
disabled task and trigger the warning in set_task_cpu() like below:
------------[ cut here ]------------
WARNING: CPU: 7 PID: 0 at kernel/sched/core.c:3115 set_task_cpu+0x188/0x240
Modules linked in: hclgevf xt_CHECKSUM ipt_REJECT nf_reject_ipv4 <...snip>
CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Tainted: G O 6.1.0-rc4+ #1
Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : set_task_cpu+0x188/0x240
lr : load_balance+0x5d0/0xc60
sp : ffff80000803bc70
x29: ffff80000803bc70 x28: ffff004089e190e8 x27: ffff004089e19040
x26: ffff007effcabc38 x25: 0000000000000000 x24: 0000000000000001
x23: ffff80000803be84 x22: 000000000000000c x21: ffffb093e79e2a78
x20: 000000000000000c x19: ffff004089e19040 x18: 0000000000000000
x17: 0000000000001fad x16: 0000000000000030 x15: 0000000000000000
x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000001 x10: 0000000000000400 x9 : ffffb093e4cee530
x8 : 00000000fffffffe x7 : 0000000000ce168a x6 : 000000000000013e
x5 : 00000000ffffffe1 x4 : 0000000000000001 x3 : 0000000000000b2a
x2 : 0000000000000b2a x1 : ffffb093e6d6c510 x0 : 0000000000000001
Call trace:
set_task_cpu+0x188/0x240
load_balance+0x5d0/0xc60
rebalance_domains+0x26c/0x380
_nohz_idle_balance.isra.0+0x1e0/0x370
run_rebalance_domains+0x6c/0x80
__do_softirq+0x128/0x3d8
____do_softirq+0x18/0x24
call_on_irq_stack+0x2c/0x38
do_softirq_own_stack+0x24/0x3c
__irq_exit_rcu+0xcc/0xf4
irq_exit_rcu+0x18/0x24
el1_interrupt+0x4c/0xe4
el1h_64_irq_handler+0x18/0x2c
el1h_64_irq+0x74/0x78
arch_cpu_idle+0x18/0x4c
default_idle_call+0x58/0x194
do_idle+0x244/0x2b0
cpu_startup_entry+0x30/0x3c
secondary_start_kernel+0x14c/0x190
__secondary_switched+0xb0/0xb4
---[ end trace 0000000000000000 ]---
Further investigation shows that the warning is superfluous, the migration
disabled task is just going to be migrated to its current running CPU.
This is because that on load balance if the dst_cpu is not allowed by the
task, we'll re-select a new_dst_cpu as a candidate. If no task can be
balanced to dst_cpu we'll try to balance the task to the new_dst_cpu
instead. In this case when the migration disabled task is not on CPU it
only allows to run on its current CPU, load balance will select its
current CPU as new_dst_cpu and later triggers the warning above.
The new_dst_cpu is chosen from the env->dst_grpmask. Currently it
contains CPUs in sched_group_span() and if we have overlapped groups it's
possible to run into this case. This patch makes env->dst_grpmask of
group_balance_mask() which exclude any CPUs from the busiest group and
solve the issue. For balancing in a domain with no overlapped groups
the behaviour keeps same as before.
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230530082507.10444-1-yangyicong@huawei.com
Scan elements for x,y,z channels is little endian and requires no bit shifts.
LE vs. BE is controlled in register SENS_CONFIG2 and bit LE_BE, default
value is LE.
Fixes: a3e0b51884 ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230605103223.1400980-1-sean@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document the threshold behavior for -M/--metrics.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20230519063719.1029596-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the & and | operators are only used in metric thresholds like
(from the tma_retiring metric):
tma_retiring > 0.7 | tma_heavy_operations > 0.1
Thresholds are always computed when present, but a lack of events may
mean the threshold can't be computed. This happens with the option
--metric-no-threshold for say the metric tma_retiring on Tigerlake model
CPUs.
To fully compute the threshold tma_heavy_operations is needed and it
needs the extra events of IDQ.MS_UOPS, UOPS_DECODED.DEC0,
cpu/UOPS_DECODED.DEC0,cmask=1/ and IDQ.MITE_UOPS. So
--metric-no-threshold is a useful option to reduce the number of events
needed and potentially multiplexing of events.
Rather than just fail threshold computations like this, we may know a
result from just the left or right-hand side. So, for tma_retiring if
its value is "> 0.7" we know it is over the threshold. This allows the
metric to have the threshold coloring, when possible, without all the
counters being programmed.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20230519063719.1029596-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This fixes:
arch/arm/boot/dts/bcm53015-meraki-mr26.dtb: keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/input/gpio-keys.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230602133455.7441-2-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Such property simply doesn't exist (is not documented or used anywhere).
This fixes:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@21000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@22000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@23000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
From schema: Documentation/devicetree/bindings/usb/generic-xhci.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230602133455.7441-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Add two more Northstar devices based on the BCM4708 SoC. Linux already
contains DTS files for both.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230602153657.11362-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Switch away from deprecated properties.
This fixes:
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: gpio-sck: False schema does not allow [[6, 7, 0]]
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: gpio-mosi: False schema does not allow [[6, 4, 0]]
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: 'sck-gpios' is a required property
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: Unevaluated properties are not allowed ('gpio-mosi', 'gpio-sck' were unexpected)
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230602151023.8607-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
In the series, we extend the capability of mt8188-mt6359 driver.
The following changes are included.
1. Divide ADDA BE dai into two dais for SOF.
2. Register hdmi/dp jack pins.
3. dai_fmt can be configured from device tree.
4. Add some I2S codecs support.
In addition, new compatible string "mediatek,mt8188-nau8825" is
included for a new board support.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset adds the changes required for the hda-dai extension to
deal with SSSP/DMIC/SoundWire starting with LunarLake, as well as the
new TLV IPC to provide the DMA stream_tag to the DSP firmware.
LunarLake support for SSP/DMIC is ready but is gated by the patch
"ASoC: SOF: Intel: shim: add enum for ACE 2.0 IP used in LunarLake"
currently only present in the SoundWire tree.
In Windows the Microsoft _DSM doesn't call functions 3->5->7 for suspend
and 8->6->4 for resume like Linux currently does.
Rather it calls 3->7->5 for suspend and 6->8->4 for resume.
Align this calling order for Linux as well.
Link: https://learn.microsoft.com/en-us/windows-hardware/design/device-experiences/modern-standby-states
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[BUG]
Test case btrfs/027 would crash with subpage (64K page size, 4K
sectorsize) with the following dying messages:
debug: map_length=16384 length=65536 type=metadata|raid6(0x104)
assertion failed: map_length >= length, in fs/btrfs/volumes.c:8093
------------[ cut here ]------------
kernel BUG at fs/btrfs/messages.c:259!
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
btrfs_assertfail+0x28/0x2c [btrfs]
btrfs_map_repair_block+0x150/0x2b8 [btrfs]
btrfs_repair_io_failure+0xd4/0x31c [btrfs]
btrfs_read_extent_buffer+0x150/0x16c [btrfs]
read_tree_block+0x38/0xbc [btrfs]
read_tree_root_path+0xfc/0x1bc [btrfs]
btrfs_get_root_ref.part.0+0xd4/0x3a8 [btrfs]
open_ctree+0xa30/0x172c [btrfs]
btrfs_mount_root+0x3c4/0x4a4 [btrfs]
legacy_get_tree+0x30/0x60
vfs_get_tree+0x28/0xec
vfs_kern_mount.part.0+0x90/0xd4
vfs_kern_mount+0x14/0x28
btrfs_mount+0x114/0x418 [btrfs]
legacy_get_tree+0x30/0x60
vfs_get_tree+0x28/0xec
path_mount+0x3e0/0xb64
__arm64_sys_mount+0x200/0x2d8
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x60/0x11c
do_el0_svc+0x38/0x98
el0_svc+0x40/0xa8
el0t_64_sync_handler+0xf4/0x120
el0t_64_sync+0x190/0x194
Code: aa0403e2 b0fff060 91010000 959c2024 (d4210000)
[CAUSE]
In btrfs/027 we test RAID6 with missing devices, in this particular
case, we're repairing a metadata at the end of a data stripe.
But at btrfs_repair_io_failure(), we always pass a full PAGE for repair,
and for subpage case this can cross stripe boundary and lead to the
above BUG_ON().
This metadata repair code is always there, since the introduction of
subpage support, but this can trigger BUG_ON() after the bio split
ability at btrfs_map_bio().
[FIX]
Instead of passing the old PAGE_SIZE, we calculate the correct length
based on the eb size and page size for both regular and subpage cases.
CC: stable@vger.kernel.org # 6.3+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
commit 9946e39fe8 ("ACPI: resource: skip IRQ override on
AMD Zen platforms") attempted to overhaul the override logic so it
didn't apply on X86 AMD Zen systems. This was intentional so that
systems would prefer DSDT values instead of default MADT value for
IRQ 1 on Ryzen 6000 systems which typically uses ActiveLow for IRQ1.
This turned out to be a bad assumption because several vendors
add Interrupt Source Override but don't fix the DSDT. A pile of
quirks was collecting that proved this wasn't sustaintable.
Furthermore some vendors have used ActiveHigh for IRQ1.
To solve this problem revert the following commits:
* commit 17bb7046e7 ("ACPI: resource: Do IRQ override on all TongFang
GMxRGxx")
* commit f3cb9b7408 ("ACPI: resource: do IRQ override on Lenovo 14ALC7")
* commit bfcdf58380 ("ACPI: resource: do IRQ override on LENOVO IdeaPad")
* commit 7592b79ba4 ("ACPI: resource: do IRQ override on XMG Core 15")
* commit 9946e39fe8 ("ACPI: resource: skip IRQ override on AMD Zen
platforms")
Reported-by: evilsnoo@proton.me
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394
Reported-by: ruinairas1992@gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217406
Reported-by: nmschulte@gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217336
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Werner Sembach <wse@tuxedocomputers.com>
Tested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_sleep_suspend_setup() function is missing an __init annotation,
which causes a warning in rare configurations that end up not inlining
it into its caller:
WARNING: modpost: vmlinux.o: section mismatch in reference: acpi_sleep_suspend_setup (section: .text) -> acpi_s2idle_setup (section: .init.text)
It's only called from an __init function, so adding the annotation is
correct here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ghes_estatus_pool_size_request() is unused now, so remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
early_lookup_bdev is now only used during the early boot code as it
should, so mark it __init to not waste run time memory on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
early_lookup_bdev is supposed to only be called from the early boot
code, but mdtblock_early_get_bdev is called as a general fallback when
lookup_bdev fails, which is problematic because early_lookup_bdev
bypasses all normal path based permission checking, and might cause
problems with certain container environments renaming devices.
Switch to only call early_lookup_bdev when block2mtd is built-in and the
system state in not running yet.
Note that this strictly speaking changes the kernel ABI as the PARTUUID=
and PARTLABEL= style syntax is now not available during a running
systems. They never were intended for that, but this breaks things
we'll have to figure out a way to make them available again. But if
avoidable in any way I'd rather avoid that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230531125535.676098-24-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify add_device a bit by splitting out the cumbersome early boot logic
into a separate helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230531125535.676098-23-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The nfit_intel_shutdown_status() function has a __weak defintion
in nfit.c and an override in acpi_nfit_test.c for testing
purposes. This works without an extern declaration, but causes
a W=1 build warning:
drivers/acpi/nfit/core.c:1717:13: error: no previous prototype for 'nfit_intel_shutdown_status' [-Werror=missing-prototypes]
Add a declaration in a header that gets included from both
sides to shut up the warning and ensure that the prototypes
actually match.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
resume_store is a sysfs attribute written during normal kernel runtime,
and it should not use the early_lookup_bdev API that bypasses all normal
path based permission checking, and might cause problems with certain
container environments renaming devices.
Switch to lookup_bdev, which does a normal path lookup instead, and fall
back to trying to parse a numeric dev_t just like early_lookup_bdev did.
Note that this strictly speaking changes the kernel ABI as the PARTUUID=
and PARTLABEL= style syntax is now not available during a running
systems. They never were intended for that, but this breaks things
we'll have to figure out a way to make them available again. But if
avoidable in any way I'd rather avoid that.
Fixes: 421a5fa1a6 ("PM / hibernate: use name_to_dev_t to parse resume")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230531125535.676098-22-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
