Rather than casting pci1xxxx_i2c_shutdown to an incompatible function type,
update the type to match that expected by __devm_add_action.
Reported by clang-16 with W-1:
.../i2c-mchp-pci1xxxx.c:1159:29: error: cast from 'void (*)(struct pci1xxxx_i2c *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
ret = devm_add_action(dev, (void (*)(void *))pci1xxxx_i2c_shutdown, i2c);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/device.h:251:29: note: expanded from macro 'devm_add_action'
__devm_add_action(release, action, data, #action)
^~~~~~
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Tharun Kumar P<tharunkumar.pasumarthi@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Save a bit of code for older Tegra platforms by compiling out
VI's I2C mode support that's used only for Tegra210.
$ size i2c-tegra.o
text data bss dec hex filename
11381 292 8 11681 2da1 i2c-tegra.o (full)
10193 292 8 10493 28fd i2c-tegra.o (no-dvc)
9145 292 8 9445 24e5 i2c-tegra.o (no-vi,no-dvc)
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Save a bit of code for newer Tegra platforms by compiling out
DVC's I2C mode support that's used only for Tegra2.
$ size i2c-tegra.o
text data bss dec hex filename
- 11381 292 8 11681 2da1 i2c-tegra.o
+ 10193 292 8 10493 28fd i2c-tegra.o
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Allocate only one DMA channel for I2C and share it for both TX and RX
instead of using two different DMA hardware channels with the same
slave ID. Since I2C supports only half duplex, there is no impact on
perf with this.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add SMBus PCI ID on Intel Meteor Lake PCH-S.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add SMBus PCI ID on Intel Meteor Lake SoC-S South.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Indent data field in the i801_ids table by one tab to make more space for
longer device names.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Currently several architectures have kerneldoc comments for
arch_atomic_*(), which is unhelpful as these live in a shared namespace
where they clash, and the arch_atomic_*() ops are now an implementation
detail of the raw_atomic_*() ops, which no-one should use those
directly.
Delete the kerneldoc comments for arch_atomic_*(), along with
pseudo-kerneldoc comments which are in the correct style but are missing
the leading '/**' necessary to be true kerneldoc comments.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-28-mark.rutland@arm.com
Add the generated atomic headers to driver-api/basics.rst in order to
provide documentation for the Linux kernel's atomic operations.
At the same time, dtop the x86 atomic header, which provides kerneldoc
comments for some arch_atomic*_*() operations. The arch_atomic*_*()
operations are now purely an implenentation detail of the
raw_atomic*_*() ops, and outside of implementing the atomics, code
should use the raw_atomic*_*() forms.
[Mark: add atomic-{instrumented,long}.h, update commit message]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-27-mark.rutland@arm.com
Currently the atomics are documented in Documentation/atomic_t.txt, and
have no kerneldoc comments. There are a sufficient number of gotchas
(e.g. semantics, noinstr-safety) that it would be nice to have comments
to call these out, and it would be nice to have kerneldoc comments such
that these can be collated.
While it's possible to derive the semantics from the code, this can be
painful given the amount of indirection we currently have (e.g. fallback
paths), and it's easy to be mislead by naming, e.g.
* The unconditional void-returning ops *only* have relaxed variants
without a _relaxed suffix, and can easily be mistaken for being fully
ordered.
It would be nice to give these a _relaxed() suffix, but this would
result in significant churn throughout the kernel.
* Our naming of conditional and unconditional+test ops is rather
inconsistent, and it can be difficult to derive the name of an
operation, or to identify where an op is conditional or
unconditional+test.
Some ops are clearly conditional:
- dec_if_positive
- add_unless
- dec_unless_positive
- inc_unless_negative
Some ops are clearly unconditional+test:
- sub_and_test
- dec_and_test
- inc_and_test
However, what exactly those test is not obvious. A _test_zero suffix
might be clearer.
Others could be read ambiguously:
- inc_not_zero // conditional
- add_negative // unconditional+test
It would probably be worth renaming these, e.g. to inc_unless_zero and
add_test_negative.
As a step towards making this more consistent and easier to understand,
this patch adds kerneldoc comments for all generated *atomic*_*()
functions. These are generated from templates, with some common text
shared, making it easy to extend these in future if necessary.
I've tried to make these as consistent and clear as possible, and I've
deliberately ensured:
* All ops have their ordering explicitly mentioned in the short and long
description.
* All test ops have "test" in their short description.
* All ops are described as an expression using their usual C operator.
For example:
andnot: "Atomically updates @v to (@v & ~@i)"
inc: "Atomically updates @v to (@v + 1)"
Which may be clearer to non-naative English speakers, and allows all
the operations to be described in the same style.
* All conditional ops have their condition described as an expression
using the usual C operators. For example:
add_unless: "If (@v != @u), atomically updates @v to (@v + @i)"
cmpxchg: "If (@v == @old), atomically updates @v to @new"
Which may be clearer to non-naative English speakers, and allows all
the operations to be described in the same style.
* All bitwise ops (and,andnot,or,xor) explicitly mention that they are
bitwise in their short description, so that they are not mistaken for
performing their logical equivalents.
* The noinstr safety of each op is explicitly described, with a
description of whether or not to use the raw_ form of the op.
There should be no functional change as a result of this patch.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-26-mark.rutland@arm.com
In some cases we'd like to indicate the bitwise negation of a parameter,
e.g.
~@var
This will be helpful for describing the atomic andnot operations, where
we'd like to write comments of the form:
Atomically updates @v to (@v & ~@i)
Which kernel-doc currently transforms to:
Atomically updates **v** to (**v** & ~**i**)
Rather than the preferable form:
Atomically updates **v** to (**v** & **~i**)
This is similar to what we did for '!@var' in commit:
ee2aa75903 ("scripts: kernel-doc: accept negation like !@var")
This patch follows the same pattern that commit used to permit a '!'
prefix on a param ref, allowing a '~' prefix on a param ref, cuasing
kernel-doc to generate the preferred form above.
Suggested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-25-mark.rutland@arm.com
Currently each ordering variant has several potential definitions,
with a mixture of preprocessor and C definitions, including several
copies of its C prototype, e.g.
| #if defined(arch_atomic_fetch_andnot_acquire)
| #define raw_atomic_fetch_andnot_acquire arch_atomic_fetch_andnot_acquire
| #elif defined(arch_atomic_fetch_andnot_relaxed)
| static __always_inline int
| raw_atomic_fetch_andnot_acquire(int i, atomic_t *v)
| {
| int ret = arch_atomic_fetch_andnot_relaxed(i, v);
| __atomic_acquire_fence();
| return ret;
| }
| #elif defined(arch_atomic_fetch_andnot)
| #define raw_atomic_fetch_andnot_acquire arch_atomic_fetch_andnot
| #else
| static __always_inline int
| raw_atomic_fetch_andnot_acquire(int i, atomic_t *v)
| {
| return raw_atomic_fetch_and_acquire(~i, v);
| }
| #endif
Make this a bit simpler by defining the C prototype once, and writing
the various potential definitions as plain C code guarded by ifdeffery.
For example, the above becomes:
| static __always_inline int
| raw_atomic_fetch_andnot_acquire(int i, atomic_t *v)
| {
| #if defined(arch_atomic_fetch_andnot_acquire)
| return arch_atomic_fetch_andnot_acquire(i, v);
| #elif defined(arch_atomic_fetch_andnot_relaxed)
| int ret = arch_atomic_fetch_andnot_relaxed(i, v);
| __atomic_acquire_fence();
| return ret;
| #elif defined(arch_atomic_fetch_andnot)
| return arch_atomic_fetch_andnot(i, v);
| #else
| return raw_atomic_fetch_and_acquire(~i, v);
| #endif
| }
Which is far easier to read. As we now always have a single copy of the
C prototype wrapping all the potential definitions, we now have an
obvious single location for kerneldoc comments.
At the same time, the fallbacks for raw_atomic*_xhcg() are made to use
'new' rather than 'i' as the name of the new value. This is what the
existing fallback template used, and is more consistent with the
raw_atomic{_try,}cmpxchg() fallbacks.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-24-mark.rutland@arm.com
Currently, atomic-long is split into two sections, one defining the
raw_atomic_long_*() ops for CONFIG_64BIT, and one defining the raw
atomic_long_*() ops for !CONFIG_64BIT.
With many lines elided, this looks like:
| #ifdef CONFIG_64BIT
| ...
| static __always_inline bool
| raw_atomic_long_try_cmpxchg(atomic_long_t *v, long *old, long new)
| {
| return raw_atomic64_try_cmpxchg(v, (s64 *)old, new);
| }
| ...
| #else /* CONFIG_64BIT */
| ...
| static __always_inline bool
| raw_atomic_long_try_cmpxchg(atomic_long_t *v, long *old, long new)
| {
| return raw_atomic_try_cmpxchg(v, (int *)old, new);
| }
| ...
| #endif
The two definitions are spread far apart in the file, and duplicate the
prototype, making it hard to have a legible set of kerneldoc comments.
Make this simpler by defining the C prototype once, and writing the two
definitions inline. For example, the above becomes:
| static __always_inline bool
| raw_atomic_long_try_cmpxchg(atomic_long_t *v, long *old, long new)
| {
| #ifdef CONFIG_64BIT
| return raw_atomic64_try_cmpxchg(v, (s64 *)old, new);
| #else
| return raw_atomic_try_cmpxchg(v, (int *)old, new);
| #endif
| }
As we now always have a single copy of the C prototype wrapping all the
potential definitions, we now have an obvious single location for kerneldoc
comments. As a bonus, both the script and the generated file are
somewhat shorter.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-23-mark.rutland@arm.com
Currently gen-atomic-long.sh's gen_proto_order_variant() function
combines the pfx/name/sfx/order variables immediately, unlike other
functions in gen-atomic-*.sh.
This is fine today, but subsequent patches will require the individual
individual pfx/name/sfx/order variables within gen-atomic-long.sh's
gen_proto_order_variant() function. In preparation for this, split the
variables in the style of other gen-atomic-*.sh scripts.
This results in no change to the generated headers, so there should be
no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-22-mark.rutland@arm.com
Currently the various ordering variants of an atomic operation are
defined in groups of full/acquire/release/relaxed ordering variants with
some shared ifdeffery and several potential definitions of each ordering
variant in different branches of the shared ifdeffery.
As an ordering variant can have several potential definitions down
different branches of the shared ifdeffery, it can be painful for a
human to find a relevant definition, and we don't have a good location
to place anything common to all definitions of an ordering variant (e.g.
kerneldoc).
Historically the grouping of full/acquire/release/relaxed ordering
variants was necessary as we filled in the missing atomics in the same
namespace as the architecture used. It would be easy to accidentally
define one ordering fallback in terms of another ordering fallback with
redundant barriers, and avoiding that would otherwise require a lot of
baroque ifdeffery.
With recent changes we no longer need to fill in the missing atomics in
the arch_atomic*_<op>() namespace, and only need to fill in the
raw_atomic*_<op>() namespace. Due to this, there's no risk of a
namespace collision, and we can define each raw_atomic*_<op> ordering
variant with its own ifdeffery checking for the arch_atomic*_<op>
ordering variants.
Restructure the fallbacks in this way, with each ordering variant having
its own ifdeffery of the form:
| #if defined(arch_atomic_fetch_andnot_acquire)
| #define raw_atomic_fetch_andnot_acquire arch_atomic_fetch_andnot_acquire
| #elif defined(arch_atomic_fetch_andnot_relaxed)
| static __always_inline int
| raw_atomic_fetch_andnot_acquire(int i, atomic_t *v)
| {
| int ret = arch_atomic_fetch_andnot_relaxed(i, v);
| __atomic_acquire_fence();
| return ret;
| }
| #elif defined(arch_atomic_fetch_andnot)
| #define raw_atomic_fetch_andnot_acquire arch_atomic_fetch_andnot
| #else
| static __always_inline int
| raw_atomic_fetch_andnot_acquire(int i, atomic_t *v)
| {
| return raw_atomic_fetch_and_acquire(~i, v);
| }
| #endif
Note that where there's no relevant arch_atomic*_<op>() ordering
variant, we'll define the operation in terms of a distinct
raw_atomic*_<otherop>(), as this itself might have been filled in with a
fallback.
As we now generate the raw_atomic*_<op>() implementations directly, we
no longer need the trivial wrappers, so they are removed.
This makes the ifdeffery easier to follow, and will allow for further
improvements in subsequent patches.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-21-mark.rutland@arm.com
Now that arch_atomic*() usage is limited to the atomic headers, we no
longer have any users of arch_atomic_long_*(), and can generate
raw_atomic_long_*() directly.
Generate the raw_atomic_long_*() ops directly.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-20-mark.rutland@arm.com
Now that we have raw_atomic*_<op>() definitions, there's no need to use
arch_atomic*_<op>() definitions outside of the low-level atomic
definitions.
Move treewide users of arch_atomic*_<op>() over to the equivalent
raw_atomic*_<op>().
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-19-mark.rutland@arm.com
Currently a number of arch_atomic*_<op>() functions are optional, and
where an arch does not provide a given arch_atomic*_<op>() we will
define an implementation of arch_atomic*_<op>() in
atomic-arch-fallback.h.
Filling in the missing ops requires special care as we want to select
the optimal definition of each op (e.g. preferentially defining ops in
terms of their relaxed form rather than their fully-ordered form). The
ifdeffery necessary for this requires us to group ordering variants
together, which can be a bit painful to read, and is painful for
kerneldoc generation.
It would be easier to handle this if we generated ops into a separate
namespace, as this would remove the need to take special care with the
ifdeffery, and allow each ordering variant to be generated separately.
This patch adds a new set of raw_atomic_<op>() definitions, which are
currently trivial wrappers of their arch_atomic_<op>() equivalent. This
will allow us to move treewide users of arch_atomic_<op>() over to raw
atomic op before we rework the fallback generation to generate
raw_atomic_<op> directly.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-18-mark.rutland@arm.com
Currently gen_proto_order_variants() hard codes the path for the templates used
for order fallbacks. Factor this out into a helper so that it can be reused
elsewhere.
This results in no change to the generated headers, so there should be
no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-17-mark.rutland@arm.com
We removed cmpxchg_double() and variants in commit:
b4cf83b2d1da40b2 ("arch: Remove cmpxchg_double")
Which removed the need for "${mult}" in the instrumentation logic.
Unfortunately we missed an instance of "${mult}".
There is no change to the generated header.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-16-mark.rutland@arm.com
At the start of gen_proto_order_variants(), the ${order} variable is not
yet defined, and will be substituted with an empty string.
Replace the current bogus use of ${order} with an empty string instead.
This results in no change to the generated headers.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-15-mark.rutland@arm.com
Some atomics can be implemented in several different ways, e.g.
FULL/ACQUIRE/RELEASE ordered atomics can be implemented in terms of
RELAXED atomics, and ACQUIRE/RELEASE/RELAXED can be implemented in terms
of FULL ordered atomics. Other atomics are optional, and don't exist in
some configurations (e.g. not all architectures implement the 128-bit
cmpxchg ops).
Subsequent patches will require that architectures define a preprocessor
symbol for any atomic (or ordering variant) which is optional. This will
make the fallback ifdeffery more robust, and simplify future changes.
Add the required definitions to arch/xtensa.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-14-mark.rutland@arm.com
Some atomics can be implemented in several different ways, e.g.
FULL/ACQUIRE/RELEASE ordered atomics can be implemented in terms of
RELAXED atomics, and ACQUIRE/RELEASE/RELAXED can be implemented in terms
of FULL ordered atomics. Other atomics are optional, and don't exist in
some configurations (e.g. not all architectures implement the 128-bit
cmpxchg ops).
Subsequent patches will require that architectures define a preprocessor
symbol for any atomic (or ordering variant) which is optional. This will
make the fallback ifdeffery more robust, and simplify future changes.
Add the required definitions to arch/x86.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-13-mark.rutland@arm.com
Some atomics can be implemented in several different ways, e.g.
FULL/ACQUIRE/RELEASE ordered atomics can be implemented in terms of
RELAXED atomics, and ACQUIRE/RELEASE/RELAXED can be implemented in terms
of FULL ordered atomics. Other atomics are optional, and don't exist in
some configurations (e.g. not all architectures implement the 128-bit
cmpxchg ops).
Subsequent patches will require that architectures define a preprocessor
symbol for any atomic (or ordering variant) which is optional. This will
make the fallback ifdeffery more robust, and simplify future changes.
Add the required definitions to arch/sparc.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-12-mark.rutland@arm.com
Some atomics can be implemented in several different ways, e.g.
FULL/ACQUIRE/RELEASE ordered atomics can be implemented in terms of
RELAXED atomics, and ACQUIRE/RELEASE/RELAXED can be implemented in terms
of FULL ordered atomics. Other atomics are optional, and don't exist in
some configurations (e.g. not all architectures implement the 128-bit
cmpxchg ops).
Subsequent patches will require that architectures define a preprocessor
symbol for any atomic (or ordering variant) which is optional. This will
make the fallback ifdeffery more robust, and simplify future changes.
Add the required definitions to arch/sh.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-11-mark.rutland@arm.com
Some atomics can be implemented in several different ways, e.g.
FULL/ACQUIRE/RELEASE ordered atomics can be implemented in terms of
RELAXED atomics, and ACQUIRE/RELEASE/RELAXED can be implemented in terms
of FULL ordered atomics. Other atomics are optional, and don't exist in
some configurations (e.g. not all architectures implement the 128-bit
cmpxchg ops).
Subsequent patches will require that architectures define a preprocessor
symbol for any atomic (or ordering variant) which is optional. This will
make the fallback ifdeffery more robust, and simplify future changes.
Add the required definitions to arch/parisc.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-10-mark.rutland@arm.com
Some atomics can be implemented in several different ways, e.g.
FULL/ACQUIRE/RELEASE ordered atomics can be implemented in terms of
RELAXED atomics, and ACQUIRE/RELEASE/RELAXED can be implemented in terms
of FULL ordered atomics. Other atomics are optional, and don't exist in
some configurations (e.g. not all architectures implement the 128-bit
cmpxchg ops).
Subsequent patches will require that architectures define a preprocessor
symbol for any atomic (or ordering variant) which is optional. This will
make the fallback ifdeffery more robust, and simplify future changes.
Add the required definitions to arch/m68k.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-9-mark.rutland@arm.com
Some atomics can be implemented in several different ways, e.g.
FULL/ACQUIRE/RELEASE ordered atomics can be implemented in terms of
RELAXED atomics, and ACQUIRE/RELEASE/RELAXED can be implemented in terms
of FULL ordered atomics. Other atomics are optional, and don't exist in
some configurations (e.g. not all architectures implement the 128-bit
cmpxchg ops).
Subsequent patches will require that architectures define a preprocessor
symbol for any atomic (or ordering variant) which is optional. This will
make the fallback ifdeffery more robust, and simplify future changes.
Add the required definitions to arch/hexagon.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-8-mark.rutland@arm.com
Some atomics can be implemented in several different ways, e.g.
FULL/ACQUIRE/RELEASE ordered atomics can be implemented in terms of
RELAXED atomics, and ACQUIRE/RELEASE/RELAXED can be implemented in terms
of FULL ordered atomics. Other atomics are optional, and don't exist in
some configurations (e.g. not all architectures implement the 128-bit
cmpxchg ops).
Subsequent patches will require that architectures define a preprocessor
symbol for any atomic (or ordering variant) which is optional. This will
make the fallback ifdeffery more robust, and simplify future changes.
Add the required definitions to arch/arm.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-7-mark.rutland@arm.com
Some atomics can be implemented in several different ways, e.g.
FULL/ACQUIRE/RELEASE ordered atomics can be implemented in terms of
RELAXED atomics, and ACQUIRE/RELEASE/RELAXED can be implemented in terms
of FULL ordered atomics. Other atomics are optional, and don't exist in
some configurations (e.g. not all architectures implement the 128-bit
cmpxchg ops).
Subsequent patches will require that architectures define a preprocessor
symbol for any atomic (or ordering variant) which is optional. This will
make the fallback ifdeffery more robust, and simplify future changes.
Add the required definitions to arch/arc.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-6-mark.rutland@arm.com
Most architectures define the atomic/atomic64 xchg and cmpxchg
operations in terms of arch_xchg and arch_cmpxchg respectfully.
Add fallbacks for these cases and remove the trivial cases from arch
code. On some architectures the existing definitions are kept as these
are used to build other arch_atomic*() operations.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-5-mark.rutland@arm.com
Hexagon's implementation of arch_atomic_cmpxchg() is identical to its
implementation of arch_cmpxchg(). Have it define arch_atomic_cmpxchg()
in terms of arch_cmpxchg(), matching what it does for arch_atomic_xchg()
and arch_xchg().
At the same time, remove the kerneldoc comments for hexagon's
arch_atomic_xchg() and arch_atomic_cmpxchg(). The arch_atomic_*()
namespace is shared by all architectures and the API should be
documented centrally, and the comments aren't all that helpful as-is.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-4-mark.rutland@arm.com
Currently a subset of the fallback templates have kerneldoc comments,
resulting in a haphazard set of generated kerneldoc comments as only
some operations have fallback templates to begin with.
We'd like to generate more consistent kerneldoc comments, and to do so
we'll need to restructure the way the fallback code is generated.
To minimize churn and to make it easier to restructure the fallback
code, this patch removes the existing kerneldoc comments from the
fallback templates. We can add new kerneldoc comments in subsequent
patches.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-3-mark.rutland@arm.com
The sync_*() ops on arch/arm are defined in terms of the regular bitops
with no special handling. This is not correct, as UP kernels elide
barriers for the fully-ordered operations, and so the required ordering
is lost when such UP kernels are run under a hypervsior on an SMP
system.
Fix this by defining sync ops with the required barriers.
Note: On 32-bit arm, the sync_*() ops are currently only used by Xen,
which requires ARMv7, but the semantics can be implemented for ARMv6+.
Fixes: e54d2f6152 ("xen/arm: sync_bitops")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-2-mark.rutland@arm.com
I will help Wolfram out with the i2c controllers patches.
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Headset microphone on this platform does not work without
ALC897_FIXUP_HEADSET_MIC_PIN fixup.
Signed-off-by: RenHai <kean0048@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230602003604.975892-1-kean0048@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asnaa@nvidia.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Chris Pringle <chris.pringle@phabrix.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Tali Perry <tali.perry@nuvoton.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Now that there is a cross arch u128 and cmpxchg128(), use those
instead of the custom CDSG helper.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230531132324.058821078@infradead.org
64-bit targets need the __int128 type, which for pa-risc means raising
the minimum gcc version to 11.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20230602143912.GI620383%40hirez.programming.kicks-ass.net
In order to replace cmpxchg_double() with the newly minted
cmpxchg128() family of functions, wire it up in this_cpu_cmpxchg().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230531132323.654945124@infradead.org
Add the try_cmpxchg() form to the per-cpu ops.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230531132323.587480729@infradead.org
Wire up the cmpxchg128 family in the atomic wrapper scripts.
These provide the generic cmpxchg128 family of functions from the
arch_ prefixed version, adding explicit instrumentation where needed.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230531132323.519237070@infradead.org
For all architectures that currently support cmpxchg_double()
implement the cmpxchg128() family of functions that is basically the
same but with a saner interface.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230531132323.452120708@infradead.org
