Devices with a type-cover have an additional "book" mode, deactivating
type-cover input and turning off its backlight. This is currently
unsupported, leading to the warning
surface_aggregator_tablet_mode_switch 01:26:01:00:01: unknown device posture for type-cover: 6
Therefore, add support for this state and map it to enable tablet-mode.
Fixes: 37ff64cd81 ("platform/surface: aggregator_tabletsw: Add support for Type-Cover posture source")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230525213218.2797480-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Devices with a type-cover have an additional "book" mode, deactivating
type-cover input and turning off its backlight. This is currently
unsupported, leading to the warning
surface_aggregator_tablet_mode_switch 01:0e:01:00:01: unknown KIP cover state: 6
Therefore, add support for this state and map it to enable tablet-mode.
Fixes: 9f794056db ("platform/surface: Add KIP/POS tablet-mode switch driver")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230525213218.2797480-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently, event completion work-items are restricted to be run strictly
in non-parallel fashion by the respective workqueue. However, this has
lead to some problems:
In some instances, the event notifier function called inside this
completion workqueue takes a non-negligible amount of time to execute.
One such example is the battery event handling code (surface_battery.c),
which can result in a full battery information refresh, involving
further synchronous communication with the EC inside the event handler.
This is made worse if the communication fails spuriously, generally
incurring a multi-second timeout.
Since the event completions are run strictly non-parallel, this blocks
other events from being propagated to the respective subsystems. This
becomes especially noticeable for keyboard and touchpad input, which
also funnel their events through this system. Here, users have reported
occasional multi-second "freezes".
Note, however, that the event handling system was never intended to run
purely sequentially. Instead, we have one work struct per EC/SAM
subsystem, processing the event queue for that subsystem. These work
structs were intended to run in parallel, allowing sequential processing
of work items for each subsystem but parallel processing of work items
across subsystems.
The only restriction to this is the way the workqueue is created.
Therefore, replace create_workqueue() with alloc_workqueue() and do not
restrict the maximum number of parallel work items to be executed on
that queue, resolving any cross-subsystem blockage.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Link: https://github.com/linux-surface/linux-surface/issues/1026
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230525210110.2785470-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Make to_ssam_device_driver() a bit safer by replacing container_of()
with container_of_const() to respect the constness of the passed in
pointer, instead of silently discarding any const specifications. This
change also makes it more similar to to_ssam_device(), which already
uses container_of_const().
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230525205041.2774947-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a helper routine to check the underlying cpu id, that can be used
across the PMC driver to remove the duplicate code.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230525141929.866385-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Recent PMFW's have support for querying the STB DRAM size. Add this
support to the driver.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230525141929.866385-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pass true/false to the bool argument of the amd_pmc_send_cmd() function,
instead of 1/0 to match the function signature.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230525141929.866385-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The mailing list that goes to linux-trace-devel is for the tracing
libraries, and the patchwork associated to the tracing libraries keys
off of that mailing list.
For anything that lives in the Linux kernel proper (including the tools
directory) must go through linux-trace-kernel, as the patchwork to that
list keys off of the Linux kernel proper.
Update the MAINTAINERS file to reflect the proper mailing lists.
Link: https://lore.kernel.org/linux-trace-kernel/20230529044002.0481452b@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Code should first check for valid value of array offset, then use it as
the index. Fixes smatch warning:
drivers/memory/brcmstb_dpfe.c:443 __send_command() error: testing array offset 'cmd' after use.
Fixes: 2f330caff5 ("memory: brcmstb: Add driver for DPFE")
Acked-by: Markus Mayer <mmayer@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230513112931.176066-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Change 'specfic' to 'specific' and make the pinctrl DTSI header
more like the s3c64xx pinctrl DTSI (previously it was copied from
the main s5pv210 DTSI, and not changed to match the new contents).
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20230519190625.7844-4-aweber.kernel@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Change 'specfic' to 'specific', 'optiosn' to 'options' and remove
duplicated 'are listed' in DTSI heading comments.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20230519190625.7844-2-aweber.kernel@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Those concern:
* "#size-cells" and "#address-cells" wrongly used
* residual "reg" property appearing on endpoints where it could be
avoided
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fixes DSI related warnings:
* "#size-cells" and "#address-cells" wrongly used
* Changed 'panel-dsi@0' to 'panel@0' according to dsi-controller.yaml
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
In the event a device is connected to the samsung-dsim
controller that doesn't support the burst-clock, the
driver is able to get the requested pixel clock from the
attached device or bridge. In these instances, the
samsung,burst-clock-frequency isn't needed, so remove
it from the required list.
The pll-clock frequency can be set by the device tree entry
for samsung,pll-clock-frequency, but in some cases, the
pll-clock may have the same clock rate as sclk_mipi clock.
If they are equal, this flag is not needed since the driver
will use the sclk_mipi rate as a fallback.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230528132727.3933-1-aford173@gmail.com
"#address-cells" and "#size-cells" are two properties that are not
mandatory. For instance, the DSI could refer to a bridge outside the scope
of the node rather than include a 'panel@0' subnode. By doing so, address
and size fields become then unnecessary, creating a warning at build time.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Several warnings appear when building and checking stm32f429 device-tree:
arch/arm/boot/dts/stm32f469-disco.dts:182.28-184.5: Warning (unit_address_vs_reg): /soc/display-controller@40016800/port/endpoint@0: node has a unit name, but no reg or ranges property
.../arch/arm/boot/dts/stm32f469-disco.dtb: dsi@40016c00: Unevaluated properties are not allowed ('panel-dsi@0' was unexpected)
From schema: .../Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
Fix those.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
UTS_RELEASE has a maximum length of 64 which can cause rxrpc_version to
exceed the 65 byte message limit.
Per the rx spec[1]: "If a server receives a packet with a type value of 13,
and the client-initiated flag set, it should respond with a 65-byte payload
containing a string that identifies the version of AFS software it is
running."
The current implementation causes a compile error when WERROR is turned on
and/or UTS_RELEASE exceeds the length of 49 (making the version string more
than 64 characters).
Fix this by generating the string during module initialisation and limiting
the UTS_RELEASE segment of the string does not exceed 49 chars. We need to
make sure that the 64 bytes includes "linux-" at the front and " AF_RXRPC"
at the back as this may be used in pattern matching.
Fixes: 44ba06987c ("RxRPC: Handle VERSION Rx protocol packets")
Reported-by: Kenny Ho <Kenny.Ho@amd.com>
Link: https://lore.kernel.org/r/20230523223944.691076-1-Kenny.Ho@amd.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Kenny Ho <Kenny.Ho@amd.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Andrew Lunn <andrew@lunn.ch>
cc: David Laight <David.Laight@ACULAB.COM>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Link: https://web.mit.edu/kolya/afs/rx/rx-spec [1]
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Link: https://lore.kernel.org/r/654974.1685100894@warthog.procyon.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Oleksij Rempel says:
====================
Microchip DSA Driver Improvements
changes v2:
- set .max_register = U8_MAX, it should be more readable
- clarify in the RMW error handling patch, logging behavior
expectation.
I'd like to share a set of patches for the Microchip DSA driver. These
patches were chosen from a bigger set because they are simpler and
should be easier to review. The goal is to make the code easier to read,
get rid of unused code, and handle errors better.
====================
Link: https://lore.kernel.org/r/20230526073445.668430-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This update introduces specific register access boundaries for the
KSZ8873 and KSZ8863 chips within the DSA Microchip driver. The outlined
ranges target global control registers, port registers, and advanced
control registers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch prepares the ksz8863_smi part of ksz8 driver to utilize the
regmap register access validation feature.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The only place where this variable would be set to false is the
ksz8_config_cpu_port() function. But it is done in a bogus way:
for (i = 0; i < dev->phy_port_cnt; i++) {
if (i == dev->phy_port_cnt) <--- will be never executed.
break;
p->on = 1;
So, we never have a situation where p->on = 0. In this case, we can just
remove it.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It is not immediately obvious that this driver allocates, via the
KSZ_REGMAP_TABLE() macro, 3 regmaps for register access: dev->regmap[0]
for 8-bit access, dev->regmap[1] for 16-bit and dev->regmap[2] for
32-bit access.
In future changes that add support for reg_fields, each field will have
to specify through which of the 3 regmaps it's going to go. Add an enum
now, to denote one of the 3 register access widths, and make the code go
through some wrapper functions for easier review and further
modification.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch refines the error handling mechanism for 8-bit register
read-modify-write operations. In case of a failure, it now logs an error
message detailing the problematic offset. This enhancement aids in
debugging by providing more precise information when these operations
encounter issues.
Furthermore, the ksz_prmw8() function has been updated to return error
values rather than void, enabling calling functions to appropriately
respond to errors.
Additionally, in case of an error that affects both the current and
future accesses, the PHY driver will log the errors consistently, akin
to the existing behavior in all ksz_read*/ksz_write* helpers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20230526214003.2134595-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fix the following error in kernel log due to too long sound card name:
"
asoc-audio-graph-card sound: ASoC: driver name too long 'STM32MP1-AV96-HDMI' -> 'STM32MP1-AV96-H'
"
Fixes: e027da3427 ("ARM: dts: stm32: Add bindings for audio on AV96")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
When handling ESR_ELx_EC_WATCHPT_LOW, far_el2 member of struct
kvm_vcpu_fault_info will be copied to far member of struct
kvm_debug_exit_arch and exposed to the userspace. The userspace will
see stale values from older faults if the fault info does not get
populated.
Fixes: 8fb2046180 ("KVM: arm64: Move early handlers to per-EC handlers")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230530024651.10014-1-akihiko.odaki@daynix.com
Cc: stable@vger.kernel.org
* irq/gic-v3-asr8601:
: Workaround for the ASR8601 SoC that couples a GIC500 with
: CPUs that use affinities that cannot be handled by the GIC...
irqchip/gic-v3: Work around affinity issues on ASR8601
irqchip/gic-v3: Improve affinity helper
Signed-off-by: Marc Zyngier <maz@kernel.org>
kallsyms_lookup() which in turn calls kallsyms_lookup_buildid() writes
to index "KSYM_NAME_LEN - 1".
Thus the array passed as namebuf to kallsyms_lookup() should be
KSYM_NAME_LEN in size.
In xmon.c the array was defined to be "128" bytes directly, without
using KSYM_NAME_LEN. Commit b8a94bfb33 ("kallsyms: increase maximum
kernel symbol length to 512") changed the value to 512, but missed
updating the xmon code.
Fixes: b8a94bfb33 ("kallsyms: increase maximum kernel symbol length to 512")
Cc: stable@vger.kernel.org # v6.1+
Co-developed-by: Onkarnath <onkarnath.1@samsung.com>
Signed-off-by: Onkarnath <onkarnath.1@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
[mpe: Tweak change log wording and fix commit reference]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230529111337.352990-2-maninder1.s@samsung.com
Currently in tce_freemulti_pSeriesLP() there is no limit on how many
TCEs are passed to the H_STUFF_TCE hcall. This has not caused an issue
until now, but newer firmware releases have started enforcing a limit of
512 TCEs per call.
The limit is correct per the specification (PAPR v2.12 § 14.5.4.2.3).
The code has been in it's current form since it was initially merged.
Cc: stable@vger.kernel.org
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
[mpe: Tweak change log wording & add PAPR reference]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230525143454.56878-1-gbatra@linux.vnet.ibm.com
The recently added P10 AES/GCM code added some files containing
CRYPTOGAMS perl-asm code which are near duplicates of the p8 files
found in drivers/crypto/vmx.
In particular the newly added files produce functions with identical
names to the existing code.
When the kernel is built with CONFIG_CRYPTO_AES_GCM_P10=y and
CONFIG_CRYPTO_DEV_VMX_ENCRYPT=y that leads to link errors, eg:
ld: drivers/crypto/vmx/aesp8-ppc.o: in function `aes_p8_set_encrypt_key':
(.text+0xa0): multiple definition of `aes_p8_set_encrypt_key'; arch/powerpc/crypto/aesp8-ppc.o:(.text+0xa0): first defined here
...
ld: drivers/crypto/vmx/ghashp8-ppc.o: in function `gcm_ghash_p8':
(.text+0x140): multiple definition of `gcm_ghash_p8'; arch/powerpc/crypto/ghashp8-ppc.o:(.text+0x2e4): first defined here
Fix it for now by renaming the newly added files and functions to use
"p10" instead of "p8" in the names.
Fixes: 45a4672b9a ("crypto: p10-aes-gcm - Update Kconfig and Makefile")
Tested-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230525150501.37081-1-mpe@ellerman.id.au
Donald Hunter says:
====================
netlink: specs: add ynl spec for ovs_flow
Add a ynl specification for ovs_flow. The spec is sufficient to dump ovs
flows but some attrs have been left as binary blobs because ynl doesn't
support C arrays in struct definitions yet.
Patches 1-3 add features for genetlink-legacy specs
Patch 4 is the ovs_flow netlink spec
====================
Link: https://lore.kernel.org/r/20230527133107.68161-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a ynl specification for ovs_flow. This spec is sufficient to dump ovs
flows. Some attrs are left as binary blobs because ynl doesn't support C
arrays in struct definitions yet.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support decoding scalars as enums in struct members for genetlink-legacy
specs.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This eliminates the need for e.g. --json '{"dp-ifindex":0}' which is not
too big a deal for ovs but will get tiresome for fixed header structs that
have many members.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make it possible to document the meaning of struct member attributes in
genetlink-legacy specs.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent patch added READ_ONCE() in packet_bind() and packet_bind_spkt()
This is better handled by reading pkt_sk(sk)->num later
in packet_do_bind() while appropriate lock is held.
READ_ONCE() in writers are often an evidence of something being wrong.
Fixes: 822b5a1c17 ("af_packet: Fix data-races of pkt_sk(sk)->num.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230526154342.2533026-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool has some attrs which dump multiple scalars into
an attribute. The spec currently expects one attr per entry.
Fixes: a353318ebf ("tools: ynl: populate most of the ethtool spec")
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230526220653.65538-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "len" variable needs to be signed for the error handling to work
correctly.
Fixes: 2e910b9532 ("net: Add a function to splice pages into an skbuff for MSG_SPLICE_PAGES")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/366861a7-87c8-4bbf-9101-69dd41021d07@kili.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than using put_device(&mdiodev->dev), use the proper interface
provided to dispose of the mdiodev - that being mdio_device_free().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/E1q2VsB-008QlZ-El@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: pcs: add helpers to xpcs and lynx to manage mdiodev
This morning, we have had two instances where the destruction of the
MDIO device associated with XPCS and Lynx has been wrong. Rather than
allowing this pattern of errors to continue, let's make it easier for
driver authors to get this right by adding a helper.
The changes are essentially:
1. Add two new mdio device helpers to manage the underlying struct
device reference count. Note that the existing mdio_device_free()
doesn't actually free anything, it merely puts the reference count.
2. Make the existing _create() and _destroy() PCS driver methods
increment and decrement this refcount using these helpers. This
results in no overall change, although drivers may hang on to
the mdio device for a few cycles longer.
3. Add _create_mdiodev() which creates the mdio device before calling
the existing _create() method. Once the _create() method has
returned, we put the reference count on the mdio device.
If _create() was successful, then the reference count taken there
will "hold" the mdio device for the lifetime of the PCS (in other
words, until _destroy() is called.) However, if _create() failed,
then dropping the refcount at this point will free the mdio device.
This is the exact behaviour we desire.
4. Convert users that create a mdio device and then call the PCS's
_create() method over to the new _create_mdiodev() method, and
simplify the cleanup.
We also have DPAA2 and fmem_memac that look up their PCS rather than
creating it. These could also drop their reference count on the MDIO
device immediately after calling lynx_pcs_create(), which would then
mean we wouldn't need lynx_get_mdio_device() and the associated
complexity to put the device in dpaa2_pcs_destroy() and pcs_put().
Note that DPAA2 bypasses the mdio device's abstractions by calling
put_device() directly.
====================
Link: https://lore.kernel.org/r/ZHCGZ8IgAAwr8bla@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the newly introduced lynx_pcs_create_mdiodev() which simplifies the
creation and destruction of the lynx PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the newly introduced lynx_pcs_create_mdiodev() which simplifies the
creation and destruction of the lynx PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add lynx_pcs_create_mdiodev() to simplify the creation of the mdio
device associated with lynx PCS. In order to allow lynx_pcs_destroy()
to clean this up, we need to arrange for lynx_pcs_create() to take a
refcount on the mdiodev, and lynx_pcs_destroy() to put it.
Adding the refcounting to lynx_pcs_create()..lynx_pcs_destroy() will
be transparent to existing users of these interfaces.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new xpcs_create_mdiodev() creator, which simplifies the
creation and destruction of the mdio device associated with xpcs.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
