The dpu_crtc_atomic_check() compares blending stage with DPU_STAGE_MAX
(maximum amount of blending stages supported by the driver), however we
should compare it against .max_mixer_blendstages, the maximum blend
stage supported by the mixer.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527338/
Link: https://lore.kernel.org/r/20230316161653.4106395-16-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Neither source split nor multirect are properly supported at this
moment. Both of these checks depend on normalized_zpos being equal for
several planes (which is never the case for normalized zpos).
Drop these checks to simplify dpu_crtc_atomic_check(). The actual
support for either of these features is not removed from the backend
code (sspp, ctl, etc).
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527332/
Link: https://lore.kernel.org/r/20230316161653.4106395-15-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Remove dpu_hw_fmt_layout instance from struct dpu_hw_sspp_cfg, leaving
only src_rect and dst_rect. This way all the pipes used by the plane
will have a common layout instance (as the framebuffer is shared between
them), while still keeping a separate src/dst rectangle configuration
for each pipe.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527329/
Link: https://lore.kernel.org/r/20230316161653.4106395-13-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Set SSPP_SRCn_ADDR registers to 0 while setting up solid fill, as we can
not be sure that the previous address is still valid.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527324/
Link: https://lore.kernel.org/r/20230316161653.4106395-11-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There is no need to pass full dpu_hw_sspp_cfg instance to
_dpu_hw_sspp_setup_scaler3, pass just struct dpu_format pointer.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527328/
Link: https://lore.kernel.org/r/20230316161653.4106395-10-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In preparation to adding fully virtualized planes, move struct
dpu_hw_sspp instance from struct dpu_plane to struct dpu_plane_state, as
it will become a part of state (variable, changes during runtime) rather
than part of a plane (ideally should be statically allocated during boot).
The sspp pointer is set at the dpu_plane_reset(), since this is the
function which allocates the state. Once we have fully virtual
plane<->SSPP relationship, the SSPP will be allocated dynamically in the
dpu_plane_atomic_check() function.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527322/
Link: https://lore.kernel.org/r/20230316161653.4106395-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The pipe's layout is not cached, corresponding data structure is zeroed
out each time in the dpu_plane_sspp_atomic_update(), right before the
call to _dpu_plane_set_scanout() -> dpu_format_populate_layout().
Drop plane_addr comparison against previous layout and corresponding
EAGAIN handling.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527314/
Link: https://lore.kernel.org/r/20230316161653.4106395-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
As SSPP blocks are now visible through dpu_kms->rm.sspp_blocks, move
SSPP debugfs creation from dpu_plane to dpu_kms. We are going to break
the 1:1 correspondence between planes and SSPPs, so it makes no sense
anymore to create SSPP debugfs entries in dpu_plane.c
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527317/
Link: https://lore.kernel.org/r/20230316161653.4106395-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
For all hardware blocks except SSPP the corresponding struct is named
after the block. Rename dpu_hw_pipe (SSPP structure) to dpu_hw_sspp.
Also rename struct dpu_hw_pipe_cfg to dpu_hw_sspp_cfg to follow this
change.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527312/
Link: https://lore.kernel.org/r/20230316161653.4106395-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Commit da7716a249 ("drm/msm/dpu: Add support for XR30 format") enabled
support for the 10-bit XR30 color format but missed enabling support for the
corresponding per-pixel alpha-blending AR30 color format.
Declaring only XR30 but not AR30 color format support can trigger bugs in
userspace. KDE KWin compositor versions prior to 5.27.3 for example prefer
10-bit color formats, rendering a 1cm^2 black box around the cursor due to
missing per-pixel alpha-blending.
Signed-off-by: Leonard Lausen <leonard@lausen.nl>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180)
Patchwork: https://patchwork.freedesktop.org/patch/527985/
Link: https://lore.kernel.org/r/6f33219dc848ccd7122bce6933338033aa18c33c@lausen.nl
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Flush mechanism for DSPP blocks has changed in sc7280 family, it
allows individual sub blocks to be flushed in coordination with
master flush control.
Representation: master_flush && (PCC_flush | IGC_flush .. etc )
This change adds necessary support for the above design.
Changes in v1:
- Few nits (Doug, Dmitry)
- Restrict sub-block flush programming to dpu_hw_ctl file (Dmitry)
Changes in v2:
- Move the address offset to flush macro (Dmitry)
- Separate ops for the sub block flush (Dmitry)
Changes in v3:
- Reuse the DPU_DSPP_xx enum instead of a new one (Dmitry)
Changes in v4:
- Use shorter version for unsigned int (Stephen)
Changes in v5:
- Spurious patch please ignore.
Changes in v6:
- Add SOB tag (Doug, Dmitry)
Changes in v7:
- Cache flush mask per dspp (Dmitry)
- Few nits (Marijn)
Changes in v8:
- Few nits (Marijn)
Changes in v9:
- Use DSPP enum while accessing flush mask to make it readable (Dmitry)
- Few nits (Dmitry)
Changes in v10:
- Fix white spaces in a separate patch (Dmitry)
Changes in v11:
- Define a macro for dspp flush selection (Marijn)
- Few nits (Marijn)
Changes in v12:
- Minor comments (reorder macros and a condition) (Marijn)
Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/520701/
Link: https://lore.kernel.org/r/1674814487-2112-1-git-send-email-quic_kalyant@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Now that the TE setup has been moved to prepare_for_kickoff(), we have
not prepare_commit() callbacks left. This makes dpu_encoder_prepare_commit()
do nothing. Remove prepare_commit() from DPU driver.
Changes in V3:
- Reworded commit message to be more clear
- Corrected spelling mistake in commit message
Changes in V4:
- Reworded commit message for clarity
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/523606/
Link: https://lore.kernel.org/r/20230221184256.1436-4-quic_jesszhan@quicinc.com
[DB: fixed merge conflict]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently, DPU will enable TE during prepare_commit(). However, this
will cause a crash and reboot to sahara when trying to read/write to
register in get_autorefresh_config(), because the core clock rates
aren't set at that time.
This used to work because phys_enc->hw_pp is only initialized in mode
set [1], so the first prepare_commit() will return before any register
read/write as hw_pp would be NULL.
However, when we try to implement support for INTF TE, we will run into
the clock issue described above as hw_intf will *not* be NULL on the
first prepare_commit(). This is because the initialization of
dpu_enc->hw_intf has been moved to dpu_encoder_setup() [2].
To avoid this issue, let's enable TE during prepare_for_kickoff()
instead as the core clock rates are guaranteed to be set then.
Depends on: "Implement tearcheck support on INTF block" [3]
Changes in V3:
- Added function prototypes
- Reordered function definitions to make change more legible
- Removed prepare_commit() function from dpu_encoder_phys_cmd
Changes in V4:
- Reworded commit message to be more specific
- Removed dpu_encoder_phys_cmd_is_ongoing_pptx() prototype
[1] https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c#L1109
[2] https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c#L2339
[3] https://patchwork.freedesktop.org/series/112332/
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/523602/
Link: https://lore.kernel.org/r/20230221184256.1436-2-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display. The DRM core
calls both, the old callbacks and the new client helpers, from
the same places. The new functions perform the same operation as
before, so there's no change in functionality.
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to msm_fbdev_setup() after msm has registered its
DRM device. As in most drivers, msm's fbdev emulation now acts
like a regular DRM client.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_dev_unregister() releases the client automatically.
No further action is required within msm. If the fbdev framebuffer
has been fully set up, struct fb_ops.fb_destroy implements the
release. For partially initialized emulation, the fbdev client
reverts the initial setup.
v2:
* handle fbdev module parameter correctly (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # RB5
Patchwork: https://patchwork.freedesktop.org/patch/530560/
Link: https://lore.kernel.org/r/20230403124538.8497-9-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Initialize the fbdev client in the fbdev code with empty helper
functions. Also clean up the client. The helpers will later
implement various functionality of the DRM client. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530557/
Link: https://lore.kernel.org/r/20230403124538.8497-8-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Define the module's parameter 'fbdev' in fbdev code. No other code
uses it. No functional changes, but simplifies the later conversion
to struct drm_client.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530555/
Link: https://lore.kernel.org/r/20230403124538.8497-7-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The DRM device stores a pointer to the fbdev helper. Remove struct
msm_drm_private.fbdev, which contains the same value. No functional
changes.
v2:
* test for fb_helper->fb in debugfs code
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530559/
Link: https://lore.kernel.org/r/20230403124538.8497-6-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Remove struct msm_fbdev, which is an empty wrapper around struct
drm_fb_helper. Use the latter directly. No functional changes.
v2:
* kfree fbdev helper instance on init errors (Dmitri)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530554/
Link: https://lore.kernel.org/r/20230403124538.8497-5-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move aperture management out of the fbdev code. It is unrelated
and needs to run even if fbdev support has been disabled. Call
the helper at the top of msm_drm_init() to take over hardware
from other drivers.
v2:
* bind all subdevices before acquiring device (Dmitri)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530553/
Link: https://lore.kernel.org/r/20230403124538.8497-3-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
If userspace asked for a timeout greater than zero, but less than a
jiffy, they clearly weren't planning on spinning. So it is better
to round up to one.
This fixes an issue with supertuxkart that was (for some reason)
spinning on a gl sync with 1ms timeout. CPU time for a demo lap
drops from:
15.83user 20.98system 0:47.46elapsed 77%CPU
drops to:
8.84user 2.30system 0:46.67elapsed 23%CPU
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/528725/
Link: https://lore.kernel.org/r/20230324220013.191795-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Make sure to destroy the workqueue also in case of early errors during
bind (e.g. a subcomponent failing to bind).
Since commit c3b790ea07 ("drm: Manage drm_mode_config_init with
drmm_") the mode config will be freed when the drm device is released
also when using the legacy interface, but add an explicit cleanup for
consistency and to facilitate backporting.
Fixes: 060530f1ea ("drm/msm: use componentised device support")
Cc: stable@vger.kernel.org # 3.15
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525093/
Link: https://lore.kernel.org/r/20230306100722.28485-9-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Fixes: f026e431cf ("drm/msm: Convert to Linux IRQ interfaces")
Cc: stable@vger.kernel.org # 5.14
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525104/
Link: https://lore.kernel.org/r/20230306100722.28485-5-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Fixes: 98659487b8 ("drm/msm: add support to take dpu snapshot")
Cc: stable@vger.kernel.org # 5.14
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525099/
Link: https://lore.kernel.org/r/20230306100722.28485-4-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This reverts commit 8636500300.
A recent commit tried to address a drm device leak in the early
msm_drm_uninit() error paths but ended up making things worse.
Specifically, it moved the drm device reference put in msm_drm_uninit()
to msm_drm_init() which means that the drm would now be leaked on normal
unbind.
For reasons that were never spelled out, it also added kms NULL pointer
checks to a couple of helper functions that had nothing to do with the
paths modified by the patch.
Instead of trying to salvage this incrementally, let's revert the bad
commit so that clean and backportable fixes can be added in its place.
Fixes: 8636500300 ("drm/msm: Fix failure paths in msm_drm_init()")
Cc: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525092/
Link: https://lore.kernel.org/r/20230306100722.28485-3-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This reverts commit 643b7d0869.
A recent patch that tried to fix up the msm_drm_init() paths with
respect to the workqueue but only ended up making things worse:
First, the newly added calls to msm_drm_uninit() on early errors would
trigger NULL-pointer dereferences, for example, as the kms pointer would
not have been initialised. (Note that these paths were also modified by
a second broken error handling patch which in effect cancelled out this
part when merged.)
Second, the newly added allocation sanity check would still leak the
previously allocated drm device.
Instead of trying to salvage what was badly broken (and clearly not
tested), let's revert the bad commit so that clean and backportable
fixes can be added in its place.
Fixes: 643b7d0869 ("drm/msm: Add missing check and destroy for alloc_ordered_workqueue")
Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525107/
Link: https://lore.kernel.org/r/20230306100722.28485-2-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Mostly i915 fixes: dp mst for compression/dsc, perf ioctl uaf, ctx rpm
accounting, gt reset vs huc loading.
And a few individual driver fixes: ivpu dma fence&suspend, panfrost
mmap, nouveau color depth
-----BEGIN PGP SIGNATURE-----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=kCTh
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-04-06' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Mostly i915 fixes: dp mst for compression/dsc, perf ioctl uaf, ctx rpm
accounting, gt reset vs huc loading.
And a few individual driver fixes: ivpu dma fence&suspend, panfrost
mmap, nouveau color depth"
* tag 'drm-fixes-2023-04-06' of git://anongit.freedesktop.org/drm/drm:
accel/ivpu: Fix S3 system suspend when not idle
accel/ivpu: Add dma fence to command buffers only
drm/i915: Fix context runtime accounting
drm/i915: fix race condition UAF in i915_perf_add_config_ioctl
drm/i915: Use compressed bpp when calculating m/n value for DP MST DSC
drm/i915/huc: Cancel HuC delayed load timer on reset.
drm/i915/ttm: fix sparse warning
drm/panfrost: Fix the panfrost_mmu_map_fault_addr() error path
drm/nouveau/disp: Support more modes by checking with lower bpc
The majority of changes here are various fixes for Intel drivers,
while there is a change in ASoC PCM core for the format constraints.
In addition, a workaround for HD-audio HDMI regressions and usual
HD-audio quirks are found.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmQuvFgOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE8fCQ//T1IeIlaF1V9HGC31HZZIOUq2yCvNZMlRCRjT
6R+p+QxHcubyLj01B5RtGt+DmuIm0Wq0g7RuuWLvlskYk941aOnfyPVIR5bCAJNc
VOm1V0lcUFZItTqQXwk5J4pep9s3GrRPlWqRn2LX8GeIvhOdfj8fiGV91k/YOTKd
toKAB34IgScX4s1KgW8S7ZG5swOe6/wqus0TIQUp+5CT+y6ciT4ky/bowmwCVpTR
k0IJlYvVxgXLEX0maVXgOu22vfuXR3RCl7NmSti/6NyFNaI+HjTZS9SsUQSlCZVp
JdV8KdXZBoo4GV/YHzmonO89F095DzRgsq5PzQEt9DkwaLtMlcwCB3qUwRPjW/A3
3NA0S69cylhLwxHD9JMfD1NodhBHG1dHMn/qqF519CWGm6rGDOt9w4rGzF3q04VX
2SsSgniAmraW+7yd0AjCUhfhk9yP2Bn/Wq2vjh+k0ciw++m3yG8ZJsjaomK27Yiz
5zYPcW4Ms+5X8WVqxnqCgRbGh6AkunUk4e5cadkNQQGpQLN7DZVBTXQ965mIdFNt
U47mvHHdTxtIeLUIgYajzV09y37KFWCow2OIYccnxRaNviDwr3onB3CbPhmaSwng
uOQDAZVegwq59dsr3Ay3C+f3CoxZrBOH//SN2KlNc5WzaqEqLxUVMIjgC7dXoeCJ
75bTss4=
=ryKW
-----END PGP SIGNATURE-----
Merge tag 'sound-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are various fixes for Intel drivers,
and there is a change in ASoC PCM core for the format constraints.
In addition, a workaround for HD-audio HDMI regressions and usual
HD-audio quirks are found"
* tag 'sound-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Preserve the previous PCM device upon re-enablement
ALSA: hda/realtek: Add quirk for Clevo X370SNW
ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
ASoC: SOF: avoid a NULL dereference with unsupported widgets
ASoC: da7213.c: add missing pm_runtime_disable()
ASoC: hdac_hdmi: use set_stream() instead of set_tdm_slots()
ASoC: codecs: lpass: fix the order or clks turn off during suspend
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer Iconia One 7 B1-750
ASoC: SOF: ipc4: Ensure DSP is in D0I0 during sof_ipc4_set_get_data()
ASoC: amd: yc: Add DMI entries to support Victus by HP Laptop 16-e1xxx (8A22)
ASoC: soc-pcm: fix hw->formats cleared by soc_pcm_hw_init() for dpcm
ASoC: Intel: soc-acpi: add table for Intel 'Rooks County' NUC M15
ASOC: Intel: sof_sdw: add quirk for Intel 'Rooks County' NUC M15
Highlights:
- more think-lmi fixes
- 1 DMI quirk addition
The following is an automated git shortlog grouped by driver:
think-lmi:
- Clean up display of current_value on Thinkstation
- Fix memory leaks when parsing ThinkStation WMI strings
- Fix memory leak when showing current settings
thinkpad_acpi:
- Add missing T14s Gen1 type to s2idle quirk list
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmQulJoUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yDLAgAh4ES4m+fdH41qnzmceISk2b+wZhh
z8SACLiTuitAPnUNAYs8yoR/tMYsuRZ7+6zJEaRZjKKjivFPYAamiTcjjprPMx51
b47hzKUXa45NI1WfN3qIcmjHXSb3HzkEstdGBERYExgQrxoMSkJ3RHm2No32iJjP
XO136iqheD/suPzFIdcdi3WR+ktCdNuqfHFYcO4SizPPfYr+3fa4TeJIF4E1sMeh
f/Kx57apsijp5dIlpntNedcAaSWppuaW4WM71hEdZDaEae+m1bcSXq2XZnJ14LZY
/t1CcWxJFqBIyod/hEJERBxi+51Lx9quaSp6JTdmZd0TkHn1ksvnZ9phkQ==
=PE0w
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- more think-lmi fixes
- one DMI quirk addition
* tag 'platform-drivers-x86-v6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Add missing T14s Gen1 type to s2idle quirk list
platform/x86: think-lmi: Clean up display of current_value on Thinkstation
platform/x86: think-lmi: Fix memory leaks when parsing ThinkStation WMI strings
platform/x86: think-lmi: Fix memory leak when showing current settings