The HOST_GOES_DOWN message should be sent even if wiamt is disabled.
Otherwise wiamt may still use the shared memory (e.g. if enabled
later) while it's no longer valid.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230822103048.2baad50eb1c3.If7b7c1dc2d6bfc6bacf7f6c72972f19714d9d973@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case CSME holds the NIC and SAP connection is already established,
iwl_pcie_prepare_card_hw() during iwl_pci_probe() will fail
(which is fine since CSME will release the nic later when asked with
a SAP message). In this case tring to grab nic access to read the
crf ids will fail with a warning.
Avoid the warning by only trying to read the crf ids in case prepare
card succeeded.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230822103048.9b026fa7b97e.I12bea7e6eef54eeeaf916b68d71583e92ff310fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
LMAC error table address was checked against UMAC
error table minimum address defined. Because of that,
the LMAC error table was not read, since both addresses
belong to different ranges. As addresses are updated from
FW alive message and should be correct, this check is not
needed.
Still keep the check for address 0 to avoid NULL address read.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.08ab1497904d.I270d4c5bcc23c5ecd0b7db475501032c450852ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are occasionally bugs which cause the device to try
to use a TFD that it wasn't supposed to, and these are
very hard to diagnose. Fill all unused TFDs with a debug
command that immediately causes an error to be detected
in these cases.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.10a9af1ca91f.Ifc790d62c52b4bc9a74c9581610af498509f5759@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We need this earlier in the file next, move it up to have
an easier to read change, since this moves other things
in the diff git generates by default.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.c6d798b600bb.I9b891ee3d3dc67822a28e44941409f5b7cb637cf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is a bit messy right now, there are functions for both,
but then gen1 function can actually deal with both gen1 and
gen2, due to the confusion about use_tfh/gen2 cleaned up in
the previous patch.
Fix the common paths to call the right functions and remove
handling of gen2 from the gen1 function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.baf23841ec5c.I40702e94b25db05e82f935f14548316f8c6429b9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no reason to warn here, it's not an internal consistency
issue, we even use this to check if the device is dead, and if it
read_mem() returns an error that's either because grab NIC access
or memory allocation failed, both of which are already noisy.
Just remove the warning entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.5f4e80eb63cc.Iffd88f63f95575f28e503da13b473724e3341aee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the ifdown function in the dst_ops structure is referenced, the input
parameter 'how' is always true. In the current implementation of the
ifdown interface, ip6_dst_ifdown does not use the input parameter 'how',
xfrm6_dst_ifdown and xfrm4_dst_ifdown functions use the input parameter
'unregister'. But false judgment on 'unregister' in xfrm6_dst_ifdown and
xfrm4_dst_ifdown is false, so remove the input parameter 'how' in ifdown
function.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821084104.3812233-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct cfg80211_tid_config.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230817211531.4193219-7-keescook@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct cfg80211_scan_request.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230817211531.4193219-6-keescook@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct cfg80211_rnr_elems.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230817211531.4193219-5-keescook@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct cfg80211_pmsr_request.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230817211531.4193219-4-keescook@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct cfg80211_mbssid_elems.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230817211531.4193219-3-keescook@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct cfg80211_cqm_config.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230817211531.4193219-2-keescook@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct cfg80211_acl_data.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230817211531.4193219-1-keescook@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reworks the ACPI thermal driver to use a table of generic trip
point structures on top of the internal representation of trip points
and removes thermal zone callbacks that are not necessary any more
from it.
It requires some relatively small changes to be made in the thermal core
too and it is based on top of changes reworking ACPI device notification
handling that are included in this merge.
* acpi-thermal: (24 commits)
ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
ACPI: thermal: Drop unnecessary thermal zone callbacks
ACPI: thermal: Rework thermal_get_trend()
ACPI: thermal: Use trip point table to register thermal zones
thermal: core: Rework and rename __for_each_thermal_trip()
ACPI: thermal: Introduce struct acpi_thermal_trip
ACPI: thermal: Carry out trip point updates under zone lock
ACPI: thermal: Clean up acpi_thermal_register_thermal_zone()
thermal: core: Add priv pointer to struct thermal_trip
thermal: core: Introduce thermal_zone_device_exec()
thermal: core: Do not handle trip points with invalid temperature
ACPI: thermal: Drop redundant local variable from acpi_thermal_resume()
ACPI: thermal: Do not attach private data to ACPI handles
ACPI: thermal: Drop enabled flag from struct acpi_thermal_active
ACPI: thermal: Drop nocrt parameter
ACPI: thermal: Install Notify() handler directly
ACPI: NFIT: Remove unnecessary .remove callback
ACPI: NFIT: Install Notify() handler directly
ACPI: HED: Install Notify() handler directly
ACPI: battery: Install Notify() handler directly
...
The following message shows up when compiling with W=1:
In function ‘fortify_memcpy_chk’,
inlined from ‘alx_get_ethtool_stats’ at drivers/net/ethernet/atheros/alx/ethtool.c:297:2:
./include/linux/fortify-string.h:592:4: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In order to get alx stats altogether, alx_get_ethtool_stats() reads
beyond hw->stats.rx_ok. Fix this warning by directly copying hw->stats,
and refactor the unnecessarily complicated BUILD_BUG_ON btw.
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821013218.1614265-1-gongruiqi@huaweicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xen provides support for injecting interrupts to the guests via the
HYPERVISOR_dm_op() hypercall. The same is used by the Virtio based
device backend implementations, in an inefficient manner currently.
Generally, the Virtio backends are implemented to work with the Eventfd
based mechanism. In order to make such backends work with Xen, another
software layer needs to poll the Eventfds and raise an interrupt to the
guest using the Xen based mechanism. This results in an extra context
switch.
This is not a new problem in Linux though. It is present with other
hypervisors like KVM, etc. as well. The generic solution implemented in
the kernel for them is to provide an IOCTL call to pass the interrupt
details and eventfd, which lets the kernel take care of polling the
eventfd and raising of the interrupt, instead of handling this in user
space (which involves an extra context switch).
This patch adds support to inject a specific interrupt to guest using
the eventfd mechanism, by preventing the extra context switch.
Inspired by existing implementations for KVM, etc..
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/8e724ac1f50c2bc1eb8da9b3ff6166f1372570aa.1692697321.git.viresh.kumar@linaro.org
Signed-off-by: Juergen Gross <jgross@suse.com>
The driver has OF match table, but still it uses an ID lookup table for
retrieving match data. Currently, the driver is working on the
assumption that an I2C device registered via OF will always match a
legacy I2C device ID. Extend match data support for OF tables by using
i2c_get_match_data() instead of the ID lookup for both OF/ID matches by
making similar OF/ID tables.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
gpiolib want to get completely rid of static gpiobase allocation,
so switch to dynamic allocat GPIO base, also can avoid warning
message:
[ 1.529974] gpio gpiochip0: Static allocation of GPIO base
is deprecated, use dynamic allocation.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Right now inode->i_mode is updated twice to reach the desired value
in tracefs_apply_options(). Because there is no lock protecting the two
writes, other threads might read the intermediate value of inode->i_mode.
Thread-1 Thread-2
// tracefs_apply_options() //e.g., acl_permission_check
inode->i_mode &= ~S_IALLUGO;
unsigned int mode = inode->i_mode;
inode->i_mode |= opts->mode;
I think there is no need to introduce a lock but it is better to
only update inode->i_mode ONCE, so the readers will either see the old
or latest value, rather than an intermediate/temporary value.
Note, the race is not a security concern as the intermediate value is more
locked down than either the start or end version. This is more just to do
the conversion cleanly.
Link: https://lore.kernel.org/linux-trace-kernel/AB5B0A1C-75D9-4E82-A7F0-CF7D0715587B@gmail.com
Signed-off-by: Sishuai Gong <sishuai.system@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Several of the list traversals in the user_events facility use safe list
traversals where they could be using the unsafe versions instead.
Replace these safe traversals with their unsafe counterparts in the
interest of optimization.
Link: https://lore.kernel.org/linux-trace-kernel/20230810194337.695983-1-ervaughn@linux.microsoft.com
Suggested-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Eric Vaughn <ervaughn@linux.microsoft.com>
Acked-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The definition of ftrace_enable_daemon() and ftrace_disable_daemon() has
been removed since commit cb7be3b2fc ("ftrace: remove daemon"), remain
the declarations in the header files, so remove it.
Link: https://lore.kernel.org/linux-trace-kernel/20230804013636.115940-1-zhangzekun11@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit 9457158bbc ("tracing: Fix reset of time stamps during trace_clock changes")
left behind tracing_reset_current() declaration.
Also commit 6954e41526 ("tracing: Place trace_pid_list logic into abstract functions")
removed trace_free_pid_list() implementation but leave declaration.
Link: https://lore.kernel.org/linux-trace-kernel/20230803144028.25492-1-yuehaibing@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cpumask, scalar and CPU fields can now be filtered by a user-provided
cpumask, document the syntax.
Link: https://lkml.kernel.org/r/20230707172155.70873-10-vschneid@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Leonardo Bras <leobras@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Per the previous commits, we now only enter do_filter_scalar_cpumask() with
a mask of weight greater than one. Optimise the equality checks.
Link: https://lkml.kernel.org/r/20230707172155.70873-9-vschneid@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Leonardo Bras <leobras@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven noted that when the user-provided cpumask contains a single CPU,
then the filtering function can use a scalar as input instead of a
full-fledged cpumask.
In this case we can directly re-use filter_pred_cpu(), we just need to
transform '&' into '==' before executing it.
Link: https://lkml.kernel.org/r/20230707172155.70873-8-vschneid@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Leonardo Bras <leobras@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven noted that when the user-provided cpumask contains a single CPU,
then the filtering function can use a scalar as input instead of a
full-fledged cpumask.
When the mask contains a single CPU, directly re-use the unsigned field
predicate functions. Transform '&' into '==' beforehand.
Link: https://lkml.kernel.org/r/20230707172155.70873-7-vschneid@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Leonardo Bras <leobras@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven noted that when the user-provided cpumask contains a single CPU,
then the filtering function can use a scalar as input instead of a
full-fledged cpumask.
Reuse do_filter_scalar_cpumask() when the input mask has a weight of one.
Link: https://lkml.kernel.org/r/20230707172155.70873-6-vschneid@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Leonardo Bras <leobras@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The tracing_cpumask lets us specify which CPUs are traced in a buffer
instance, but doesn't let us do this on a per-event basis (unless one
creates an instance per event).
A previous commit added filtering scalar fields by a user-given cpumask,
make this work with the CPU common field as well.
This enables doing things like
$ trace-cmd record -e 'sched_switch' -f 'CPU & CPUS{12-52}' \
-e 'sched_wakeup' -f 'target_cpu & CPUS{12-52}'
Link: https://lkml.kernel.org/r/20230707172155.70873-5-vschneid@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Leonardo Bras <leobras@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Several events use a scalar field to denote a CPU:
o sched_wakeup.target_cpu
o sched_migrate_task.orig_cpu,dest_cpu
o sched_move_numa.src_cpu,dst_cpu
o ipi_send_cpu.cpu
o ...
Filtering these currently requires using arithmetic comparison functions,
which can be tedious when dealing with interleaved SMT or NUMA CPU ids.
Allow these to be filtered by a user-provided cpumask, which enables e.g.:
$ trace-cmd record -e 'sched_wakeup' -f 'target_cpu & CPUS{2,4,6,8-32}'
Link: https://lkml.kernel.org/r/20230707172155.70873-4-vschneid@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Leonardo Bras <leobras@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The recently introduced ipi_send_cpumask trace event contains a cpumask
field, but it currently cannot be used in filter expressions.
Make event filtering aware of cpumask fields, and allow these to be
filtered by a user-provided cpumask.
The user-provided cpumask is to be given in cpulist format and wrapped as:
"CPUS{$cpulist}". The use of curly braces instead of parentheses is to
prevent predicate_parse() from parsing the contents of CPUS{...} as a
full-fledged predicate subexpression.
This enables e.g.:
$ trace-cmd record -e 'ipi_send_cpumask' -f 'cpumask & CPUS{2,4,6,8-32}'
Link: https://lkml.kernel.org/r/20230707172155.70873-3-vschneid@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Leonardo Bras <leobras@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Every predicate allocation includes a MAX_FILTER_STR_VAL (256) char array
in the regex field, even if the predicate function does not use the field.
A later commit will introduce a dynamically allocated cpumask to struct
filter_pred, which will require a dedicated freeing function. Bite the
bullet and make filter_pred.regex dynamically allocated.
While at it, reorder the fields of filter_pred to fill in the byte
holes. The struct now fits on a single cacheline.
No change in behaviour intended.
The kfree()'s were patched via Coccinelle:
@@
struct filter_pred *pred;
@@
-kfree(pred);
+free_predicate(pred);
Link: https://lkml.kernel.org/r/20230707172155.70873-2-vschneid@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Leonardo Bras <leobras@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
All *.S files under arch/alpha/ have been converted to include
<linux/export.h> instead of <asm/export.h>.
Remove <asm/export.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit ddb5cdbafa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.
Replace #include <asm/export.h> with #include <linux/export.h>.
After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
All *.S files under arch/ia64/ have been converted to include
<linux/export.h> instead of <asm/export.h>.
Remove <asm/export.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit ddb5cdbafa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.
Replace #include <asm/export.h> with #include <linux/export.h>.
After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
All *.S files under arch/sparc/ have been converted to include
<linux/export.h> instead of <asm/export.h>.
Remove <asm/export.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Commit ddb5cdbafa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.
Replace #include <asm/export.h> with #include <linux/export.h>.
After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
This is a remnant of commit 5e9e95cc91 ("kbuild: implement
CONFIG_TRIM_UNUSED_KSYMS without recursion").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
During domain reset process vmd_domain_reset() clears PCI
configuration space of VMD root ports. But certain platform
has observed following errors and failed to boot.
...
DMAR: VT-d detected Invalidation Queue Error: Reason f
DMAR: VT-d detected Invalidation Time-out Error: SID ffff
DMAR: VT-d detected Invalidation Completion Error: SID ffff
DMAR: QI HEAD: UNKNOWN qw0 = 0x0, qw1 = 0x0
DMAR: QI PRIOR: UNKNOWN qw0 = 0x0, qw1 = 0x0
DMAR: Invalidation Time-out Error (ITE) cleared
The root cause is that memset_io() clears prefetchable memory base/limit
registers and prefetchable base/limit 32 bits registers sequentially.
This seems to be enabling prefetchable memory if the device disabled
prefetchable memory originally.
Here is an example (before memset_io()):
PCI configuration space for 10000:00:00.0:
86 80 30 20 06 00 10 00 04 00 04 06 00 00 01 00
00 00 00 00 00 00 00 00 00 01 01 00 00 00 00 20
00 00 00 00 01 00 01 00 ff ff ff ff 75 05 00 00
...
So, prefetchable memory is ffffffff00000000-575000fffff, which is
disabled. When memset_io() clears prefetchable base 32 bits register,
the prefetchable memory becomes 0000000000000000-575000fffff, which is
enabled and incorrect.
Here is the quote from section 7.5.1.3.9 of PCI Express Base 6.0 spec:
The Prefetchable Memory Limit register must be programmed to a smaller
value than the Prefetchable Memory Base register if there is no
prefetchable memory on the secondary side of the bridge.
This is believed to be the reason for the failure and in addition the
sequence of operation in vmd_domain_reset() is not following the PCIe
specs.
Disable the bridge window by executing a sequence of operations
borrowed from pci_disable_bridge_window() and pci_setup_bridge_io(),
that comply with the PCI specifications.
Link: https://lore.kernel.org/r/20230810215029.1177379-1-nirmal.patel@linux.intel.com
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
