- generic cleanups in qcom, qcom-cci and pxa, plus core cleanups
in algo-bit and atr
Fixes:
- davinci: clean up cpufreq notifier on probe failure
- imx-lpi2c: suspend the adapter while hardware is powered down
- ls2x-v2: return IRQ_HANDLED after servicing error interrupts
- stm32f7: fix timing calculation accuracy
DT bindings:
- microchip: permit resets
- i2c-mux-pinctrl: update maintainer entry
- i2c-mux-reg: convert bindings to DT schema
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCajj5DwAKCRDaeAVmJtMt
brJXAP9XDjeVr3txsLuW3tC/JPvYmJdbuekbs62DSSIanrCMTwEA2jR4Z1QUZRaS
Lwl0axWfbkwRvXzvJW3/CJpg+5mjLQE=
=sRxB
-----END PGP SIGNATURE-----
Merge tag 'i2c-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull more i2c updates from Andi Shyti:
"Cleanups:
- generic cleanups in qcom, qcom-cci and pxa, plus core cleanups in
algo-bit and atr
Fixes:
- davinci: clean up cpufreq notifier on probe failure
- imx-lpi2c: suspend the adapter while hardware is powered down
- ls2x-v2: return IRQ_HANDLED after servicing error interrupts
- stm32f7: fix timing calculation accuracy
DT bindings:
- microchip: permit resets
- i2c-mux-pinctrl: update maintainer entry
- i2c-mux-reg: convert bindings to DT schema"
* tag 'i2c-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: pxa: Use named initializers for the platform_device_id array
i2c: imx-lpi2c: mark I2C adapter when hardware is powered down
i2c: stm32f7: truncate clock period instead of rounding it
dt-bindings: i2c: microchip,corei2c: permit resets
i2c: qcom: Unify user-visible "Qualcomm" name
i2c: ls2x-v2: return IRQ_HANDLED after servicing an error
i2c: atr: annotate i2c_atr_adap_desc->aliases with __counted_by_ptr
i2c: algo: bit: use str_plural helper in bit_xfer
dt-bindings: i2c: i2c-mux-pinctrl: change maintainer
dt-bindings: i2c: convert i2c-mux-reg to DT schema
i2c: davinci: Unregister cpufreq notifier on probe failure
i2c: qcom-cci: Remove overcautious disable_irq() calls
i2c: qcom-cci: Move cci_init() under cci_reset() function
i2c: qcom-cci: Do not check return value of cci_init()
DT core:
- Add support for handling multiple cells in "iommu-map" entries.
- Support only 1 entry in /reserved-memory "reg" entries. Support for
more than 1 entry has been broken.
- Fix a UAF on alloc_reserved_mem_array() failure
- Make "ibm,phandle" handling logic specific to PPC
- Use memcpy() instead of strcpy() for known length strings
- Ensure __of_find_n_match_cpu_property() handles malformed "reg"
entries
- Add various checks that expected strings are strings before accessing
them
- Drop redundant memset() when unflattening DT
DT bindings:
- Add a DTS style checker. Currently hooked up to dt_binding_check to
check examples.
- Convert st,nomadik platform, ti,omap-dmm, and ti,irq-crossbar
bindings to DT schema
- Add Apple System Management Controller hwmon, Qualcomm Hamoa Embedded
Controller, Qualcomm IPQ6018 PWM controller, fsl,mc1323, Samsung
SOFEF01-M DDIC panel, Freescale i.MX53 Television Encoder, Samsung S2M
series PMIC extcon, and MT6365 PMIC AuxADC schemas
- Extend bindings for QCom Maili and Nord PDC, QCom Hali fastrpc,
qcom,eliza-imem, qcom,oryon-1-5 CPU, and MT6365 Keys
- Consolidate "sram" property definitions
- Fix constraints on "nvmem" properties which only contain phandles and
no arg cells
- Another pass of fixing "phandle-array" constraints
- Add Gira vendor prefix
-----BEGIN PGP SIGNATURE-----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=0d13
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for handling multiple cells in "iommu-map" entries
- Support only 1 entry in /reserved-memory "reg" entries. Support for
more than 1 entry has been broken
- Fix a UAF on alloc_reserved_mem_array() failure
- Make "ibm,phandle" handling logic specific to PPC
- Use memcpy() instead of strcpy() for known length strings
- Ensure __of_find_n_match_cpu_property() handles malformed "reg"
entries
- Add various checks that expected strings are strings before
accessing them
- Drop redundant memset() when unflattening DT
DT bindings:
- Add a DTS style checker. Currently hooked up to dt_binding_check to
check examples
- Convert st,nomadik platform, ti,omap-dmm, and ti,irq-crossbar
bindings to DT schema
- Add Apple System Management Controller hwmon, Qualcomm Hamoa
Embedded Controller, Qualcomm IPQ6018 PWM controller, fsl,mc1323,
Samsung SOFEF01-M DDIC panel, Freescale i.MX53 Television Encoder,
Samsung S2M series PMIC extcon, and MT6365 PMIC AuxADC schemas
- Extend bindings for QCom Maili and Nord PDC, QCom Hali fastrpc,
qcom,eliza-imem, qcom,oryon-1-5 CPU, and MT6365 Keys
- Consolidate "sram" property definitions
- Fix constraints on "nvmem" properties which only contain phandles
and no arg cells
- Another pass of fixing "phandle-array" constraints
- Add Gira vendor prefix"
* tag 'devicetree-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
dt-bindings: interrupt-controller: qcom,pdc: Add Maili compatible string
dt-bindings: interrupt-controller: ti,irq-crossbar: Convert to DT schema
dt-bindings: vendor-prefixes: add Gira
dt-bindings: embedded-controller: Add Qualcomm reference device EC description
dt-bindings: pwm: add IPQ6018 binding
dt-bindings: hwmon: Add Apple System Management Controller hwmon schema
docs: dt: writing-schema: Clarify what is required in a schema
of: Respect #{iommu,msi}-cells in maps
of: Factor arguments passed to of_map_id() into a struct
of: Add convenience wrappers for of_map_id()
of: reserved_mem: zero total_reserved_mem_cnt if no valid /reserved-memory entry
of: reserved_mem: handle NULL name in of_reserved_mem_lookup()
dt-bindings: cache: l2c2x0: Add missing power-domains
dt-bindings: interrupt-controller: renesas,r9a09g077-icu: Fix reg size in example
dt-bindings: nvmem: consumer: Make 'nvmem' an array of one-item entries
drivers/of/overlay: Use memcpy() to copy known length strings
dt-bindings: add self-test fixtures for style checker
dt-bindings: wire style checker into dt_binding_check
scripts/jobserver-exec: propagate child exit status
dt-bindings: add DTS style checker
...
Both CoreI2C and the hardened versions of it on mpfs and pic64gx have a
reset pin. For the former, usually this is wired to a common fabric
reset not managed by software and for the latter two the platform
firmware takes them out of reset on first-party boards (or those using
modified versions of the vendor firmware), but not all boards may take
this approach. Permit providing a reset in devicetree for Linux, or
other devicetree-consuming software, to use.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260506-bronchial-kitten-e3697fb66ba7@spud
The YAML conversion added me as maintainer but I can't recall being
asked nor do I want to maintain it. Thierry has created the YAML file
and works for the company which contributed the driver.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Thierry Reding <thierry.reding@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260616060910.1480-2-wsa+renesas@sang-engineering.com
Convert Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt to
the YAML schema so the i2c-mux-reg binding is validated by
dt_binding_check. Faithful port of the existing properties; no
semantic change.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260608-i2c-mux-reg-base-bus-num-v2-1-776e313f213a@nexthop.ai
Two major cleanup across drivers and core code:
- use named initializers in device ID tables
- replace dev_err() with dev_err_probe()
Drivers:
- at24: use named initializers for arrays of i2c_device_data
- at91: add MCHP_LAN966X_PCI dependency
- cadence: add shutdown callback
- k1: enable by default on SpacemiT
- mxs: improve documentation
- qcom-geni: use pm_runtime_force_suspend/resume for system sleep
- tegra:
- disable fair arbitration on non-MCTP buses
- allocate DMA buffers from the correct DMA device
- designware:
- handle active target shutdown cleanly
- add shutdown callbacks for platform and PCI drivers
- adopt the new PM_RUNTIME_ACQUIRE() helpers
DT bindings:
- convert davinci bindings to DT schema
Core and muxes:
- acpi: report missing I2C resources as -ENOENT
- gpiolib: add gpiod_is_single_ended() helper for I2C GPIO users
- i2c-mux-reg: add generic firmware node support
- a set of 10 patches from Johan Hovold fixing adapter
registration races, cleanup paths and resource management
issues
New support:
- DesignWare LECA0003 (ACPI ID)
- Loongson LS2K0300 I2C controller (new driver)
- Qualcomm CCI Glymur and Shikra compatibles
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCai/V1gAKCRDaeAVmJtMt
bse9AQDssuI+jeF6X/UGddy926zIie+YuVITcBzObT+3MSQSzQD9E1HZTRJeuqA/
dRS6Thf0k4VpES8ecF6NxifZJIS4VgQ=
=GUmn
-----END PGP SIGNATURE-----
Merge tag 'i2c-7.2-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull i2c updates from Andi Shyti:
"This pull request is mostly made of cleanups and small infrastructure
improvements across the I2C core, drivers and bindings. It also adds
support for three drivers and a few new compatibles.
Two major cleanup across drivers and core code:
- use named initializers in device ID tables
- replace dev_err() with dev_err_probe()
Drivers:
- at24: use named initializers for arrays of i2c_device_data
- at91: add MCHP_LAN966X_PCI dependency
- cadence: add shutdown callback
- k1: enable by default on SpacemiT
- mxs: improve documentation
- qcom-geni: use pm_runtime_force_suspend/resume for system sleep
- tegra:
- disable fair arbitration on non-MCTP buses
- allocate DMA buffers from the correct DMA device
- designware:
- handle active target shutdown cleanly
- add shutdown callbacks for platform and PCI drivers
- adopt the new PM_RUNTIME_ACQUIRE() helpers
DT bindings:
- convert davinci bindings to DT schema
Core and muxes:
- acpi: report missing I2C resources as -ENOENT
- gpiolib: add gpiod_is_single_ended() helper for I2C GPIO users
- i2c-mux-reg: add generic firmware node support
- a set of 10 patches from Johan Hovold fixing adapter registration
races, cleanup paths and resource management issues
New support:
- DesignWare LECA0003 (ACPI ID)
- Loongson LS2K0300 I2C controller (new driver)
- Qualcomm CCI Glymur and Shikra compatibles"
* tag 'i2c-7.2-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux: (46 commits)
i2c: mxs: add missing kernel-doc for struct mxs_i2c_dev members
i2c: qcom-geni: Use pm_runtime_force_{suspend,resume} helpers
dt-bindings: i2c: qcom-cci: Document Glymur compatible
dt-bindings: i2c: qcom-cci: Document Shikra compatible
i2c: mux: reg: use device property accessors
i2c: acpi: Return -ENOENT when no resources found in i2c_acpi_client_count()
i2c: at91: Add MCHP_LAN966X_PCI dependency
i2c: eg20t: Consistently define pci_device_ids using named initializers
i2c: designware-pcidrv: Consistently define pci_device_ids using named initializers
i2c: bcm-kona: fix spelling mistake in timeout-check comment
i2c: cadence: Add shutdown handler
i2c: tegra: Disable fair arbitration for non-MCTP buses
i2c: tegra: use dmaengine_get_dma_device() for DMA buffer allocation
i2c: busses: make K1 driver default for SpacemiT platforms
i2c: Use named initializers for arrays of i2c_device_data
i2c: core: clean up adapter registration error label
i2c: core: clean up bus id allocation
i2c: core: fix adapter deregistration race
i2c: core: fix adapter registration race
i2c: core: disable runtime PM on adapter registration failure
...
The YAML conversion added me as maintainer but I can't recall being
asked nor do I want to maintain it. Add Peter as maintainer for the
binding as he is maintainer of the driver.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Add Shikra compatible consistent with CAMSS CCI interfaces.
It requires only two clocks.
Signed-off-by: Nihal Kumar Gupta <nihal.gupta@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The unfortunately named 'phandle-array' property type is really a matrix
with phandle and fixed arg cells entries. A matrix property should have 2
levels of items constraints.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260507201749.2605365-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the Texas Instruments DaVinci and Keystone I2C controller
bindings from legacy text format to modern dt-schema (YAML).
During the conversion, the `interrupts` property was made required
to match the strict requirement in the driver probe function. The
custom `ti,has-pfunc` and `power-domains` properties were also
properly defined to match SoC-specific hardware features.
Signed-off-by: Chaitanya Sabnis <chaitanya.msabnis@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260513123758.4955-1-chaitanya.msabnis@gmail.com
YAML literal block scalars cannot use tabs for indent.
Replace tab separators (mostly between values and trailing /* ... */
comments) with single spaces.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/2044ee0cac191c7be8b6e989fc3c99b24aa4cc5e.1777434096.git.daniel@makrotopia.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The i2c block on the Apple silicon t8122 (M3) SoC is compatible with the
existing driver. Add "apple,t8122-i2c" as SoC specific compatible under
"apple,t8103-i2c" used by the deriver.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add the T7 SOC compatible which fallback to AXG compatible.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
- cx92755: convert I2C bindings to DT schema
- mediatek: add optional bus power management during transfers
- pxa: handle early bus busy condition
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaeQfzQAKCRDaeAVmJtMt
bhZbAP4yxgj5FEkHaKYHEsUwXfh4zUEciWcXWaSrElrkn5/79AD/fy/zjO47zKEo
KBf6uQurXv+RCT3uwDU5QowVoYuanwo=
=5+1V
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-7.1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v7.1, part 2
- cx92755: convert I2C bindings to DT schema
- mediatek: add optional bus power management during transfers
- pxa: handle early bus busy condition
- generic cleanups in npcm7xx, qcom-cci, xiic and designware DT
bindings
- atr: use kzalloc_flex for alias pool allocation
- ixp4xx: convert bindings to DT schema
- ocores: use read_poll_timeout_atomic() for polling waits
- qcom-geni: skip extra TX DMA TRE for single read messages
- s3c24xx: validate SMBus block length before using it
- spacemit: refactor xfer path and add K1 PIO support
- tegra: identify DVC and VI with SoC data variants
- tegra: support SoC-specific register offsets
- xiic: switch to devres and generic fw properties
- xiic: skip input clock setup on non-OF systems
- various minor improvements in other drivers
rtl9300:
- add per-SoC callbacks and clock support for RTL9607C
- add support for new 50 kHz and 2.5 MHz bus speeds
- general refactoring in preparation for RTL9607C support
New support:
- DesignWare GOOG5000 (ACPI HID)
- Intel Nova Lake (ACPI ID)
- Realtek RTL9607C
- SpacemiT K3 binding
- Tegra410 register layout support
-----BEGIN PGP SIGNATURE-----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=G0Mn
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.1-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"The biggest news in this pull request is that it will start the last
cycle of me handling the I2C subsystem. From 7.2. on, I will pass
maintainership to Andi Shyti who has been maintaining the I2C drivers
for a while now and who has done a great job in doing so.
We will use this cycle for a hopefully smooth transition. Thanks must
go to Andi for stepping up! I will still be around for guidance.
Updates:
- generic cleanups in npcm7xx, qcom-cci, xiic and designware DT
bindings
- atr: use kzalloc_flex for alias pool allocation
- ixp4xx: convert bindings to DT schema
- ocores: use read_poll_timeout_atomic() for polling waits
- qcom-geni: skip extra TX DMA TRE for single read messages
- s3c24xx: validate SMBus block length before using it
- spacemit: refactor xfer path and add K1 PIO support
- tegra: identify DVC and VI with SoC data variants
- tegra: support SoC-specific register offsets
- xiic: switch to devres and generic fw properties
- xiic: skip input clock setup on non-OF systems
- various minor improvements in other drivers
rtl9300:
- add per-SoC callbacks and clock support for RTL9607C
- add support for new 50 kHz and 2.5 MHz bus speeds
- general refactoring in preparation for RTL9607C support
New support:
- DesignWare GOOG5000 (ACPI HID)
- Intel Nova Lake (ACPI ID)
- Realtek RTL9607C
- SpacemiT K3 binding
- Tegra410 register layout support"
* tag 'i2c-for-7.1-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (40 commits)
i2c: usbio: Add ACPI device-id for NVL platforms
i2c: qcom-geni: Avoid extra TX DMA TRE for single read message in GPI mode
i2c: atr: use kzalloc_flex
i2c: spacemit: introduce pio for k1
i2c: spacemit: move i2c_xfer_msg()
i2c: xiic: skip input clock setup on non-OF systems
i2c: xiic: use numbered adapter registration
i2c: xiic: cosmetic: use resource format specifier in debug log
i2c: xiic: cosmetic cleanup
i2c: xiic: switch to generic device property accessors
i2c: xiic: remove duplicate error message
i2c: xiic: switch to devres managed APIs
i2c: rtl9300: add RTL9607C i2c controller support
i2c: rtl9300: introduce new function properties to driver data
i2c: rtl9300: introduce clk struct for upcoming rtl9607 support
dt-bindings: i2c: realtek,rtl9301-i2c: extend for clocks and RTL9607C support
i2c: rtl9300: introduce a property for 8 bit width reg address
i2c: rtl9300: introduce F_BUSY to the reg_fields struct
i2c: rtl9300: introduce max length property to driver data
i2c: rtl9300: split data_reg into read and write reg
...
- generic cleanups in npcm7xx, qcom-cci, xiic and designware DT
bindings
- atr: use kzalloc_flex for alias pool allocation
- ixp4xx: convert bindings to DT schema
- ocores: use read_poll_timeout_atomic() for polling waits
- qcom-geni: skip extra TX DMA TRE for single read messages
- s3c24xx: validate SMBus block length before using it
- spacemit: refactor xfer path and add K1 PIO support
- tegra: identify DVC and VI with SoC data variants
- tegra: support SoC-specific register offsets
- xiic: switch to devres and generic fw properties
- xiic: skip input clock setup on non-OF systems
rtl9300:
- add per-SoC callbacks and clock support for RTL9607C
- add support for new 50 kHz and 2.5 MHz bus speeds
- general refactoring in preparation for RTL9607C support
New support:
- DesignWare GOOG5000 (ACPI HID)
- Intel Nova Lake (ACPI ID)
- Realtek RTL9607C
- SpacemiT K3 binding
- Tegra410 register layout support
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCadr17AAKCRDaeAVmJtMt
bizzAQDCHLEArnhcBTTsKQbElK/aDERIj1M1ouIxGzOJQ2ZHpAD8DwKkYsouZ26L
KdedUr8vu9aqZhzwj1J48/G60QCbhAw=
=8/VF
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-7.1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v7.1, part 1
- generic cleanups in npcm7xx, qcom-cci, xiic and designware DT
bindings
- atr: use kzalloc_flex for alias pool allocation
- ixp4xx: convert bindings to DT schema
- ocores: use read_poll_timeout_atomic() for polling waits
- qcom-geni: skip extra TX DMA TRE for single read messages
- s3c24xx: validate SMBus block length before using it
- spacemit: refactor xfer path and add K1 PIO support
- tegra: identify DVC and VI with SoC data variants
- tegra: support SoC-specific register offsets
- xiic: switch to devres and generic fw properties
- xiic: skip input clock setup on non-OF systems
rtl9300:
- add per-SoC callbacks and clock support for RTL9607C
- add support for new 50 kHz and 2.5 MHz bus speeds
- general refactoring in preparation for RTL9607C support
New support:
- DesignWare GOOG5000 (ACPI HID)
- Intel Nova Lake (ACPI ID)
- Realtek RTL9607C
- SpacemiT K3 binding
- Tegra410 register layout support
Add the "realtek,rtl9607-i2c" compatible for i2c controller on the
RTL9607C SoC series.
Add a clocks property to the properties to describe the i2c reference
clock and make it available for all the compatibles. This i2c reference
clock is assumed to be coming from switchcore region via Lexra bus as
the other SoC peripherals.
According to the info available about the existing devices, they also
have the i2c master controller clocks.
RTL9607C requires the "realtek,scl" and "clocks" to be specified
and so handle it under separate if check for "realtek,rtl9607-i2c".
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260401180648.337834-6-adilov@disroot.org
Convert the IOP3xx and IXP4xx XScale bindings to DT schema. This
conversion also adds the interrupts property, as it is used by the driver
and existing DTS files but was not documented in the original binding.
Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260330054439.9545-1-i.shihao.999@gmail.com
Add a compatible string for the I2C controller found in SpacemiT K3 SoC
which use same I2C IP as K1, so make it fallback to K1 compatible.
Signed-off-by: Yixun Lan <dlan@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://lore.kernel.org/r/20260325-02-k3-i2c-v1-1-78f29c83d9ac@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
As stated in the d70f60ad96 ("i2c: designware: Remove
not-going-to-be-supported code for Baikal SoC") the Baikal
platforms are not supported and the respective driver code
was removed. Remove the currently unused bindings.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260224115210.3499191-1-andriy.shevchenko@linux.intel.com
Document the Renesas RZ/G3L (R9A08G046) RIIC IP. This is compatible with
the version available on Renesas RZ/V2H (R9A09G057).
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add Milos compatible for the CAMSS CCI interfaces.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Jarkko does now work for Intel anymore and since I'm currently
maintaining this driver, update my contact information here to make sure
patches get Cc'd to me as well.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> (internally)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
- core: cleaner fwnode usage
- tegra: timing improvements and Tegra264 support
- lpi2c: fix SMBus block read NACK after byte count
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware: use a dedicated algorithm for AMD Navi
- designware: replace magic numbers with named constants
- designware: replace min_t() with min() to avoid u8 truncation
- designware: refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
at24 updates for v7.0-rc1
- add a set of new compatibles to DT bindings
- use dev_err_probe() consistently in the driver
-----BEGIN PGP SIGNATURE-----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=gCyg
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- core: cleaner fwnode usage
- tegra: timing improvements and Tegra264 support
- lpi2c: fix SMBus block read NACK after byte count
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware:
- use a dedicated algorithm for AMD Navi
- replace magic numbers with named constants
- replace min_t() with min() to avoid u8 truncation
- refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
- at24 i2c eeprom:
- add a set of new compatibles to DT bindings
- use dev_err_probe() consistently in the driver
* tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (46 commits)
i2c: imx-lpi2c: fix SMBus block read NACK after byte count
i2c: designware: Remove an unnecessary condition
i2c: designware: Enable mode swapping
i2c: designware: Combine the init functions
i2c: designware: Combine some of the common functions
i2c: designware: Use device_is_compatible() instead of custom approach
dt-bindings: eeprom: at24: Add compatible for Puya P24C128F
drivers/i2c/busses: use min() instead of min_t()
i2c: imx-lpi2c: Add runtime PM support for IRQ and clock management on i.MX8QXP/8QM
i2c: amd-mp2: clean up amd_mp2_find_device()
i2c: designware: Replace magic numbers with named constants
i2c: rtl9300: use of instead of fwnode
i2c: rtl9300: remove const cast
i2c: tegra: remove unused rst
i2c: designware: Remove not-going-to-be-supported code for Baikal SoC
i2c: spacemit: drop useless spaces
i2c: mlxbf: Use HZ_PER_KHZ in the driver
i2c: mlxbf: Remove unused bus speed definitions
i2c: core: Use dev_fwnode()
i2c: core: Replace custom implementation of device_match_fwnode()
...
There are a handful of new SoCs this time, all of these are
more or less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is
entirely unrelated with the similarly named Texas Instruments
K3 chip family that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built
on newer Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3
(SM7635) mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high
performance Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of
chips we already support, i.e. the i.MX8QM and i.MX952, with
fewer CPU cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400,
ST spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI am3703/am3715.
All of these could be restored easily if a new board gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI
based firmware.
A relatively small number of 43 boards get added this time, and
almost all of them for arm64. Aside from the reference boards for
the newly added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4,
CIX sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95,
Qualcomm qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards
getting a warning-free dtc build, and the usual work on adding
support for more hardware on the previously added machines.
-----BEGIN PGP SIGNATURE-----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=IK23
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or
less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is entirely
unrelated with the similarly named Texas Instruments K3 chip family
that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built on newer
Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635)
mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high performance
Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of chips
we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU
cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400, ST
spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI
am3703/am3715. All of these could be restored easily if a new board
gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI based
firmware.
A relatively small number of 43 boards get added this time, and almost
all of them for arm64. Aside from the reference boards for the newly
added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4, CIX
sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm
qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards getting
a warning-free dtc build, and the usual work on adding support for
more hardware on the previously added machines"
* tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits)
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
arm64: dts: realtek: Add Kent SoC and EVB device trees
dt-bindings: arm: realtek: Add Kent Soc family compatibles
ARM: dts: samsung: Drop s3c6400.dtsi
ARM: dts: nuvoton: Minor whitespace cleanup
MAINTAINERS: Add Falcon DB
arm64: dts: a7k: add COM Express boards
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
...
This is a USB HID device which includes an I2C controller and 8 GPIO pins.
The binding allows describing the chip's gpio and i2c controller in DT,
with the i2c controller being bound to a subnode named "i2c". This is
intended to be used in configurations where the CP2112 is permanently
connected in hardware.
Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260127-cp2112-dt-v13-1-6448ddd4bf22@plexus.com
The three instances of CCI found on the QCS8300 are functionally the same
as on a number of existing Qualcomm SoCs.
Introduce a new SoC-specific compatible string "qcom,qcs8300-cci" with a
common fallback.
Signed-off-by: Nihal Kumar Gupta <quic_nihalkum@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260121183142.1867199-2-quic_nihalkum@quicinc.com
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware: use a dedicated algorithm for AMD Navi
- designware: replace magic numbers with named constants
- designware: replace min_t() with min() to avoid u8 truncation
- designware: refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaX1xMAAKCRDaeAVmJtMt
bjO6AQC6bijHlaGDuzDPzAb3ucvERl3c4q5EE5HNElD3yBFT4gEAnzuk3te0GpJs
T4yjaBX0d433H9dz5VfZ1HdCo+fU/Ag=
=VD4Y
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.20
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware: use a dedicated algorithm for AMD Navi
- designware: replace magic numbers with named constants
- designware: replace min_t() with min() to avoid u8 truncation
- designware: refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
Highlights:
----------
- MCU:
- Update/add Led support on ST boards.
- MPU:
- STM32MP13:
- Add boot led and red led on ST DK board.
- STMP32MP15:
- Add boot led and red led on ST DK boards.
- Add SPI1 sleep pinctrl group.
- STM32MP23:
- Add green ,orange and boot leds on ST boards.
- Add SPI, I2C, DCMIPP and CSI instances to CLUSTER_PD
power domain.
- Enable analog-filter to all I2C instances.
- STM32MP25:
- Add green ,orange and boot leds on ST boards.
- Add SPI, I2C, DCMIPP and CSI instances to CLUSTER_PD
power domain.
- Enable analog-filter to all I2C instances.
- Add LPDDR/DDR channels to ST boards.
-----BEGIN PGP SIGNATURE-----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=fwdw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ttY4
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.20, round 1
Highlights:
----------
- MCU:
- Update/add Led support on ST boards.
- MPU:
- STM32MP13:
- Add boot led and red led on ST DK board.
- STMP32MP15:
- Add boot led and red led on ST DK boards.
- Add SPI1 sleep pinctrl group.
- STM32MP23:
- Add green ,orange and boot leds on ST boards.
- Add SPI, I2C, DCMIPP and CSI instances to CLUSTER_PD
power domain.
- Enable analog-filter to all I2C instances.
- STM32MP25:
- Add green ,orange and boot leds on ST boards.
- Add SPI, I2C, DCMIPP and CSI instances to CLUSTER_PD
power domain.
- Enable analog-filter to all I2C instances.
- Add LPDDR/DDR channels to ST boards.
* tag 'stm32-dt-for-v6.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (31 commits)
arm/arm64: dts: st: Drop unused .dtsi
arm64: STM32: drop an undefined Kconfig symbol
arm64: dts: st: Minor whitespace cleanup
arm64: dts: st: Use hyphen in node names
arm64: dts: st: add power-domain of dcmipp in stm32mp231.dtsi
arm64: dts: st: add power-domain of dcmipp in stm32mp251.dtsi
dt-bindings: media: st: dcmipp: add 'power-domains' property
arm64: dts: st: add power-domain of csi in stm32mp231.dtsi
arm64: dts: st: add power-domain of csi in stm32mp251.dtsi
dt-bindings: media: st: csi: add 'power-domains' property
ARM: dts: stm32: add spi1 sleep state pinctrl on stm32mp157c-ev1
arm64: dts: st: add DDR channel to stm32mp257f-ev1 board
arm64: dts: st: add LPDDR channel to stm32mp257f-dk board
arm64: dts: st: enable i2c analog-filter in stm32mp231.dtsi
arm64: dts: st: enable i2c analog-filter in stm32mp251.dtsi
arm64: dts: st: add power-domains in all i2c of stm32mp231.dtsi
arm64: dts: st: add power-domains in all i2c of stm32mp251.dtsi
dt-bindings: i2c: st,stm32-i2c: add 'power-domains' property
arm64: dts: st: add power-domains in all spi of stm32mp231.dtsi
arm64: dts: st: add power-domains in all spi of stm32mp251.dtsi
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 I2C may be in a power domain which is the case for the STM32MP2x
based boards. Allow a single 'power-domains' entry for STM32 I2C.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251215-stm32-i2c-mp2x-dt-updates-v1-1-2738a05a7af8@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add compatible string for MT8189 SoC.
Its multiple I2C controller instances are compatible with the ones
found in the MT8188 SoC.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The brcm,iproc-nic-i2c variant has 2 reg entries.
The second one is related to the brcm,ape-hsls-addr-mask property, but it's
not clear what a proper description would be.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The I2C controller requires a reset to ensure it starts from a clean state.
Add the 'resets' property to support this hardware requirement.
Signed-off-by: Encrow Thorne <jyc0019@gmail.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251230150653.42097-1-jyc0019@gmail.com
Add compatible string for the DesignWare-based I2C controllers present
in Mobileye Eyeq6Lplus SoC, with a fallback to the default compatible.
The same controllers are also present in the EyeQ7H, so add a compatible
for those with a fallback to the Eyeq6Lplus compatible.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251126-i2c-dw-v4-1-b0654598e7c5@bootlin.com
My name is stamped into maintainership for a big slew of DT
bindings. Now that it is changing, switch it over to my
kernel.org mail address, which will hopefully be stable for the
rest of my life.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma, brcm,sr-thermal,
amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions Owl SPS, Marvell
AP80x System Controller, Marvell CP110 System Controller,
cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data() helpers
and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the code
to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e. in
a parent node) on nodes without an interrupt. This matches the spec
description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI
-----BEGIN PGP SIGNATURE-----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=ZM/+
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc
Acked-by: Georgi Djakov <djakov@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings
Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The i2c controller in the RK3506 is compatible to the variant first found
in the RK3399 SoC, so add the RK3506 to that variant list.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251021222853.193224-1-heiko@sntech.de
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
