Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Traditionally <linux/mod_devicetable.h> was a header defining a plethora
of structs, among them struct cpu_features. This was split now with the
objective that only the relevant bits are included.
Currently <linux/mod_devicetable.h> is transitively included in
arch/loongarch/kvm/main.c via:
arch/loongarch/kvm/main.c ->
<linux/kvm_host.h> ->
<linux/entry-virt.h> ->
<linux/resume_user_mode.h> ->
<linux/memcontrol.h> ->
<linux/cgroup.h> ->
<linux/kernel_stat.h> ->
<linux/interrupt.h> ->
<linux/hardirq> ->
<asm/hardirq.h> ->
<linux/irq.h> ->
<asm/irq.h> ->
<linux/irqdomain.h> ->
<linux/of.h> ->
<linux/mod_devicetable.h>
To keep struct cpu_features available once <linux/of.h> stops including
<linux/mod_devicetable.h>, include it here explicitly.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/052feec0e04ea8f5b2706a19a5b236679eed0aba.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
kvm_io_bus_register_dev() and kvm_io_bus_unregister_dev() should be
called under kvm->slots_lock. The unregister calls in ipi.c, eiointc.c
and pch_pic.c were also missing this protection. Add it to match the
register side.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Zeng Chi <zengchi@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Sashiko reported that the irqchip index is not validated for LoongArch.
Add validation and reject out-of-range irqchip indexes to avoid indexing
past the routing table's chip array.
Cc: stable@vger.kernel.org
Fixes: 1928254c5c ("LoongArch: KVM: Add irqfd support")
Closes: https://lore.kernel.org/kvm/20260525051714.485D51F000E9@smtp.kernel.org/
Reported-by: Sashiko <sashiko-bot@kernel.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Yanfei Xu <yanfei.xu@bytedance.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The LoongArch CSRXCHG instruction returns the full old CSR value in rd
after applying the masked update. kvm_emu_xchg_csr() currently masks
the saved value before returning it to the guest, so rd receives only
the bits selected by the write mask.
That breaks the architectural behavior and makes a zero mask return 0
instead of the previous CSR value. So, keep the masked CSR update, but
return the unmodified old CSR value.
Cc: stable@vger.kernel.org
Fixes: da50f5a693 ("LoongArch: KVM: Implement handle csr exception")
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
put_user() may return -EFAULT, so, when the user space address is
invalid, the caller should return -EFAULT.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The software timer emulation is to wake up vCPU when the vCPU executes
idle instruction and gives up host CPU, the vCPU timer tick value and
interrupt is set when vCPU is scheduled in.
It is not necessary to inject timer interrupt when SW timer is expired.
Here remove it, also use common API kvm_vcpu_wake_up() to wake up vCPU.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Interrupt delivery should be called after IN_GUEST_MODE is set. Other
threads may be posting interrupt however does not send IPI to the vCPU,
since the vCPU is not in IN_GUEST_MODE yet.
Here move function call with kvm_deliver_intr() after IN_GUEST_MODE is
set, and set mode with OUTSIDE_GUEST_MODE with atomic method.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When set CSR.ESTAT register in function _kvm_setcsr(), valid bit check
is added here. Also interrupt CPU_AVEC is checked by msgint feature.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
With bitmask method, interrupts can be injected with batch mode rather
than one by one. Also remove unused array priority_to_irq[] here.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Interrupt AVEC is valid only if VM has msgint feature, and this feature
is checked in interrupt handling. Since interrupt handling is executing
in VM context switch, and it is hot path, here move the feature checking
in interrupt post rather than interrupt handling.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Function kvm_vcpu_ioctl_interrupt() can be called from userspace, here
add irq validility cheking in kvm_vcpu_ioctl_interrupt().
Cc: stable@vger.kernel.org
Fixes: f45ad5b8aa ("LoongArch: KVM: Implement vcpu interrupt operations")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
At the beginning, only 64 bit FPU is supported. With FPU register get
interface, 64 bit FPU data is copied to user space, the same with FPU
register set API. However with LSX and LASX supported in later, there
should be FPU data copied with bigger width. So here fixes this issue,
copy the whole 256 bit FPU data from/to user space.
Cc: stable@vger.kernel.org
Fixes: db1ecca22e ("LoongArch: KVM: Add LSX (128bit SIMD) support")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In kvm_lose_fpu() FPU state is save in vcpu::arch::fpu, its FPU status
comes from vcpu->arch.aux_inuse. Instead existing API vm_guest_has_xxx()
can be used also, moreover, the bits KVM_LARCH_LSX and KVM_LARCH_LASX in
arch.aux_inuse are removed. It makes the logic simpler than ever.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
With max VM supported FPU type enabled, if VM supports LASX, there is
only NONE --> LASX, no middle FPU state such as NONE --> FPU --> LASX
or NONE --> FPU --> LSX --> LASX. Here remove the middle FPU states in
function kvm_own_lsx() and kvm_own_lasx(). And it becomes simpler than
before.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
There are three FPU types FPU/LSX/LASX, which represents FPU64, FPU128
and FPU256, and now lazy FPU method is used with FPU enabling. There are
three different HW FPU exception code with different FPU type.
The exising method is to enable specified FPU type with responding FPU
exeception. Supposing application uses FPU64 and FPU256, there will be
FPU256 exception when FPU256 type is used.
Here enable FPU with the max VM supported type directly, so it can avoid
unnecessary FPU exception in future if further FPU type is used.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
There are different structures with FPU and LBT register restore, with
FPU the structure is vcpu::arch::fpu, with LBT the structure is vcpu::
arch::lbt. Moreover, FPU/LSX/LASX saving and restoring share the common
structure vcpu::arch::fpu.
New request bit KVM_REQ_LBT_LOAD is used for LBT register restore, and
rename KVM_REQ_AUX_LOAD with KVM_REQ_FPU_LOAD for FPU register restore.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When timer interrupt arrives in guest kernel, guest kernel clears the
timer interrupt and program timer with the next incoming event.
During this stage, timer tick is -1 and timer interrupt status is
disabled in ESTAT register. KVM hypervisor need write zero with timer
tick register and wait timer interrupt injection from HW side, and
then clear timer interrupt.
So there is 2 cycle delay in KVM hypervisor to emulate such scenery,
and the delay is unnecessary if there is no need to clear the timer
interrupt.
Here move 2 cycle delay into timer clear scenery and add timer ESTAT
checking after delay, and set max timer expire value if timer interrupt
does not arrive still.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
With passthrough HW timer, timer interrupt is injected by HW. When
inject emulated CPU interrupt by software such SIP0/SIP1/IPI, HW timer
interrupt may be lost.
Here check whether there is timer tick value inversion before and after
injecting emulated CPU interrupt by software, timer enabling by reading
timer cfg register is skipped. If the timer tick value is detected with
changing, then timer should be enabled. And inject a timer interrupt by
software if there is.
Cc: <stable@vger.kernel.org>
Fixes: f45ad5b8aa ("LoongArch: KVM: Implement vcpu interrupt operations").
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When AVEC interrupt controller is emulated in user space, AVEC interrupt
is injected by software like SIP0/SIP1/TI/IPI interrupts. Here also move
the AVEC interrupt injection in switch loop.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
kvm_flush_pte() is the only caller that directly assigns *pte instead
of using the kvm_set_pte() wrapper. Use the wrapper for consistency with
the rest of the file.
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In the ldptr (0x24...0x27) opcode decoding path, the default case only
breaks out but without setting "ret" value to EMULATE_FAIL. This leaves
run->mmio.len uninitialized (stale from a previous MMIO operation) while
"ret" value remains EMULATE_DO_MMIO, causing the code to proceed with an
incorrect MMIO length.
Add "ret = EMULATE_FAIL" to match the other default branches in the same
function (e.g. the 0x28...0x2e and 0x38 cases).
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
It doesn't make sense to return the recommended maximum number of vCPUs
which exceeds the maximum possible number of vCPUs.
Other architectures have already done this, such as commit 57a2e13ebd
("KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS")
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Insert the appropriate UNWIND hint into the kvm_exc_entry assembly
function to guide the generation of correct ORC table entries, thereby
solving the timeout problem ("unreliable stack") while loading the
livepatch-sample module on a physical machine running virtual machines
with multiple vcpus.
Cc: stable@vger.kernel.org
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
If we directly compile the switch.S file into the kernel, the address of
the kvm_exc_entry function will definitely be within the DMW memory area.
Therefore, we will no longer need to perform a copy relocation of the
kvm_exc_entry.
So this patch compiles switch.S directly into the kernel, and then remove
the copy relocation execution logic for the kvm_exc_entry function.
Cc: stable@vger.kernel.org
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
1, Adjust build infrastructure for 32BIT/64BIT;
2, Add HIGHMEM (PKMAP and FIX_KMAP) support;
3, Show and handle CPU vulnerabilites correctly;
4, Batch the icache maintenance for jump_label;
5, Add more atomic instructions support for BPF JIT;
6, Add more features (e.g. fsession) support for BPF trampoline;
7, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=FiFl
-----END PGP SIGNATURE-----
Merge tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust build infrastructure for 32BIT/64BIT
- Add HIGHMEM (PKMAP and FIX_KMAP) support
- Show and handle CPU vulnerabilites correctly
- Batch the icache maintenance for jump_label
- Add more atomic instructions support for BPF JIT
- Add more features (e.g. fsession) support for BPF trampoline
- Some bug fixes and other small changes
* tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (21 commits)
selftests/bpf: Enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch
LoongArch: BPF: Add fsession support for trampolines
LoongArch: BPF: Introduce emit_store_stack_imm64() helper
LoongArch: BPF: Support up to 12 function arguments for trampoline
LoongArch: BPF: Support small struct arguments for trampoline
LoongArch: BPF: Open code and remove invoke_bpf_mod_ret()
LoongArch: BPF: Support load-acquire and store-release instructions
LoongArch: BPF: Support 8 and 16 bit read-modify-write instructions
LoongArch: BPF: Add the default case in emit_atomic() and rename it
LoongArch: Define instruction formats for AM{SWAP/ADD}.{B/H} and DBAR
LoongArch: Batch the icache maintenance for jump_label
LoongArch: Add flush_icache_all()/local_flush_icache_all()
LoongArch: Add spectre boundry for syscall dispatch table
LoongArch: Show CPU vulnerabilites correctly
LoongArch: Make arch_irq_work_has_interrupt() true only if IPI HW exist
LoongArch: Use get_random_canary() for stack canary init
LoongArch: Improve the logging of disabling KASLR
LoongArch: Align FPU register state to 32 bytes
LoongArch: Handle CONFIG_32BIT in syscall_get_arch()
LoongArch: Add HIGHMEM (PKMAP and FIX_KMAP) support
...
Adjust build infrastructure (Kconfig, Makefile and ld scripts) to let
us enable both 32BIT/64BIT kernel build.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
- Add support for tracing in the standalone EL2 hypervisor code, which
should help both debugging and performance analysis. This uses the
new infrastructure for 'remote' trace buffers that can be exposed
by non-kernel entities such as firmware, and which came through the
tracing tree.
- Add support for GICv5 Per Processor Interrupts (PPIs), as the starting
point for supporting the new GIC architecture in KVM.
- Finally add support for pKVM protected guests, where pages are unmapped
from the host as they are faulted into the guest and can be shared back
from the guest using pKVM hypercalls. Protected guests are created
using a new machine type identifier. As the elusive guestmem has not
yet delivered on its promises, anonymous memory is also supported.
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet isolated.
Because this does not really yet bring fully what it promises, it is
hidden behind CONFIG_ARM_PKVM_GUEST + 'kvm-arm.mode=protected', and
also triggers TAINT_USER when a VM is created. Caveat emptor.
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state immutable.
- Expand the Stage-2 page table dumper to support NV shadow page tables
on a per-VM basis.
- Tidy up the pKVM PSCI proxy code to be slightly less hard to follow.
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups.
- A small set of patches fixing the Stage-2 MMU freeing in error cases.
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls.
- The usual cleanups and other selftest churn.
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel().
- Add DMSINTC irqchip in kernel support.
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors.
- Remove restriction on memslot alignment, which is not needed anymore with
the new gmap code.
- Fix LPSW/E to update the bear (which of course is the breaking event
address register).
x86:
- Shut up various UBSAN warnings on reading module parameter before they
were initialized.
- Don't zero-allocate page tables that are used for splitting hugepages in
the TDP MMU, as KVM is guaranteed to set all SPTEs in the page table and
thus write all bytes.
- As an optimization, bail early when trying to unsync 4KiB mappings if the
target gfn can just be mapped with a 2MiB hugepage.
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more precisely
struct kvm_mmio_fragment) to fix use-after-free stack bugs where KVM
would dereference stack pointer after an exit to userspace.
- Clean up and comment the emulated MMIO code to try to make it easier to
maintain (not necessarily "easy", but "easier").
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of VMX
and SVM enabling) as it is needed for trusted I/O.
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one of
KVM's headers that is included multiple times.
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM.
- Exempt SMM from CPUID faulting on Intel, as per the spec.
- Misc hardening and cleanup changes.
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it per-vCPU
so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs.
- Clean up and optimize the OSVW handling, avoiding a bug in which KVM would
overwrite state when enabling virtualization on multiple CPUs in parallel.
This should not be a problem because OSVW should usually be the same for
all CPUs.
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains about a
"too large" size based purely on user input.
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION.
- Disallow synchronizing a VMSA of an already-launched/encrypted vCPU, as
doing so for an SNP guest will crash the host due to an RMP violation
page fault.
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped queries
are required to hold kvm->lock, and enforce it by lockdep. Fix various
bugs where sev_guest() was not ensured to be stable for the whole
duration of a function or ioctl.
- Convert a pile of kvm->lock SEV code to guard().
- Play nicer with userspace that does not enable KVM_CAP_EXCEPTION_PAYLOAD,
for which KVM needs to set CR2 and DR6 as a response to ioctls such as
KVM_GET_VCPU_EVENTS (even if the payload would end up in EXITINFO2
rather than CR2, for example). Only set CR2 and DR6 when consumption of
the payload is imminent, but on the other hand force delivery of the
payload in all paths where userspace retrieves CR2 or DR6.
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT instead
of vmcb02->save.cr2. The value is out of sync after a save/restore
or after a #PF is injected into L2.
- Fix a class of nSVM bugs where some fields written by the CPU are not
synchronized from vmcb02 to cached vmcb12 after VMRUN, and so are not
up-to-date when saved by KVM_GET_NESTED_STATE.
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE and
KVM_SET_{S}REGS could cause vmcb02 to be incorrectly initialized after
save+restore.
- Add a variety of missing nSVM consistency checks.
- Fix several bugs where KVM failed to correctly update VMCB fields on
nested #VMEXIT.
- Fix several bugs where KVM failed to correctly synthesize #UD or #GP for
SVM-related instructions.
- Add support for save+restore of virtualized LBRs (on SVM).
- Refactor various helpers and macros to improve clarity and (hopefully)
make the code easier to maintain.
- Aggressively sanitize fields when copying from vmcb12, to guard against
unintentionally allowing L1 to utilize yet-to-be-defined features.
- Fix several bugs where KVM botched rAX legality checks when emulating SVM
instructions. There are remaining issues in that KVM doesn't handle size
prefix overrides for 64-bit guests.
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails instead of
somewhat arbitrarily synthesizing #GP (i.e. don't double down on AMD's
architectural but sketchy behavior of generating #GP for "unsupported"
addresses).
- Cache all used vmcb12 fields to further harden against TOCTOU bugs.
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros.
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate.
- Code cleanups.
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't support
reclaim, the memory is unevictable, and there is no storage to write
back to.
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests.
x86 selftests:
- Add support for Hygon CPUs in KVM selftests.
- Fix a bug in the MSR test where it would get false failures on AMD/Hygon
CPUs with exactly one of RDPID or RDTSCP.
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test for a
bug where the kernel would attempt to collapse guest_memfd folios against
KVM's will.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnftRQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPAzwf+NKO4Ktv+7A22ImN0SBl0nlUuulsz
vTcw3+hxdRoIw83GdNS+hG5js0wrpMDnbv3t4+VliDNBSSxrBzcSWX2wpilW0Xtw
qGo1MWhs2lKPy1NlaRVOwPS6j7uF3AR0TQ1iQLGMedQuCU9WpiKJxyhNXJdbLrt3
8EgFzsvtEsv+jKNRUNDf9+d0j4gZsFyIe+Brhianbw+u3/UCiUClLCdsKPc4+5ZX
08otYXytacGNIf/5Ev1vT4pHkHL0yqKXAtX7LEtaS3+0KrPuLjV4slemivzE9vf5
Evafm5AhA4wpaNMb1ZerhY3T94lsMaJpWxotjR//0Q7C9B59pCQnXCm8mg==
=CcE0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Arm:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis. This
uses the new infrastructure for 'remote' trace buffers that can be
exposed by non-kernel entities such as firmware, and which came
through the tracing tree
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM
- Finally add support for pKVM protected guests, where pages are
unmapped from the host as they are faulted into the guest and can
be shared back from the guest using pKVM hypercalls. Protected
guests are created using a new machine type identifier. As the
elusive guestmem has not yet delivered on its promises, anonymous
memory is also supported
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet
isolated. Because this does not really yet bring fully what it
promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
created. Caveat emptor
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state
immutable
- Expand the Stage-2 page table dumper to support NV shadow page
tables on a per-VM basis
- Tidy up the pKVM PSCI proxy code to be slightly less hard to
follow
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups
- A small set of patches fixing the Stage-2 MMU freeing in error
cases
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls
- The usual cleanups and other selftest churn
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()
- Add DMSINTC irqchip in kernel support
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors
- Remove restriction on memslot alignment, which is not needed
anymore with the new gmap code
- Fix LPSW/E to update the bear (which of course is the breaking
event address register)
x86:
- Shut up various UBSAN warnings on reading module parameter before
they were initialized
- Don't zero-allocate page tables that are used for splitting
hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
the page table and thus write all bytes
- As an optimization, bail early when trying to unsync 4KiB mappings
if the target gfn can just be mapped with a 2MiB hugepage
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more
precisely struct kvm_mmio_fragment) to fix use-after-free stack
bugs where KVM would dereference stack pointer after an exit to
userspace
- Clean up and comment the emulated MMIO code to try to make it
easier to maintain (not necessarily "easy", but "easier")
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
VMX and SVM enabling) as it is needed for trusted I/O
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one
of KVM's headers that is included multiple times
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM
- Exempt SMM from CPUID faulting on Intel, as per the spec
- Misc hardening and cleanup changes
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it
per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs
- Clean up and optimize the OSVW handling, avoiding a bug in which
KVM would overwrite state when enabling virtualization on multiple
CPUs in parallel. This should not be a problem because OSVW should
usually be the same for all CPUs
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
about a "too large" size based purely on user input
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION
- Disallow synchronizing a VMSA of an already-launched/encrypted
vCPU, as doing so for an SNP guest will crash the host due to an
RMP violation page fault
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
queries are required to hold kvm->lock, and enforce it by lockdep.
Fix various bugs where sev_guest() was not ensured to be stable for
the whole duration of a function or ioctl
- Convert a pile of kvm->lock SEV code to guard()
- Play nicer with userspace that does not enable
KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
payload would end up in EXITINFO2 rather than CR2, for example).
Only set CR2 and DR6 when consumption of the payload is imminent,
but on the other hand force delivery of the payload in all paths
where userspace retrieves CR2 or DR6
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
instead of vmcb02->save.cr2. The value is out of sync after a
save/restore or after a #PF is injected into L2
- Fix a class of nSVM bugs where some fields written by the CPU are
not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
are not up-to-date when saved by KVM_GET_NESTED_STATE
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
initialized after save+restore
- Add a variety of missing nSVM consistency checks
- Fix several bugs where KVM failed to correctly update VMCB fields
on nested #VMEXIT
- Fix several bugs where KVM failed to correctly synthesize #UD or
#GP for SVM-related instructions
- Add support for save+restore of virtualized LBRs (on SVM)
- Refactor various helpers and macros to improve clarity and
(hopefully) make the code easier to maintain
- Aggressively sanitize fields when copying from vmcb12, to guard
against unintentionally allowing L1 to utilize yet-to-be-defined
features
- Fix several bugs where KVM botched rAX legality checks when
emulating SVM instructions. There are remaining issues in that KVM
doesn't handle size prefix overrides for 64-bit guests
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
down on AMD's architectural but sketchy behavior of generating #GP
for "unsupported" addresses)
- Cache all used vmcb12 fields to further harden against TOCTOU bugs
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate
- Code cleanups
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
support reclaim, the memory is unevictable, and there is no storage
to write back to
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests
x86 selftests:
- Add support for Hygon CPUs in KVM selftests
- Fix a bug in the MSR test where it would get false failures on
AMD/Hygon CPUs with exactly one of RDPID or RDTSCP
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
for a bug where the kernel would attempt to collapse guest_memfd
folios against KVM's will"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
KVM: x86: use inlines instead of macros for is_sev_*guest
x86/virt: Treat SVM as unsupported when running as an SEV+ guest
KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
KVM: SEV: use mutex guard in snp_handle_guest_req()
KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
KVM: SEV: use mutex guard in snp_launch_update()
KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
KVM: SEV: WARN on unhandled VM type when initializing VM
KVM: LoongArch: selftests: Add PMU overflow interrupt test
KVM: LoongArch: selftests: Add basic PMU event counting test
KVM: LoongArch: selftests: Add cpucfg read/write helpers
LoongArch: KVM: Add DMSINTC inject msi to vCPU
LoongArch: KVM: Add DMSINTC device support
LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
...
- new API: bitmap_weight_from() and bitmap_weighted_xor() (Yury);
- drop unused __find_nth_andnot_bit() (Yury);
- new tests and test improvements (Andy, Akinobu, Yury);
- fixes for count_zeroes API (Yury);
- cleanup bitmap_print_to_pagebuf() mess (Yury);
- documentation updates (Andy, Kai, Kit).
-----BEGIN PGP SIGNATURE-----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=pEBo
-----END PGP SIGNATURE-----
Merge tag 'bitmap-for-v7.1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- new API: bitmap_weight_from() and bitmap_weighted_xor() (Yury)
- drop unused __find_nth_andnot_bit() (Yury)
- new tests and test improvements (Andy, Akinobu, Yury)
- fixes for count_zeroes API (Yury)
- cleanup bitmap_print_to_pagebuf() mess (Yury)
- documentation updates (Andy, Kai, Kit).
* tag 'bitmap-for-v7.1' of https://github.com/norov/linux: (24 commits)
bitops: Update kernel-doc for sign_extendXX()
powerpc/xive: simplify xive_spapr_debug_show()
thermal: intel: switch cpumask_get() to using cpumask_print_to_pagebuf()
coresight: don't use bitmap_print_to_pagebuf()
lib/prime_numbers: drop temporary buffer in dump_primes()
drm/xe: switch xe_pagefault_queue_init() to using bitmap_weighted_or()
ice: use bitmap_empty() in ice_vf_has_no_qs_ena
ice: use bitmap_weighted_xor() in ice_find_free_recp_res_idx()
bitmap: introduce bitmap_weighted_xor()
bitmap: add test_zero_nbits()
bitmap: exclude nbits == 0 cases from bitmap test
bitmap: test bitmap_weight() for more
asm-generic/bitops: Fix a comment typo in instrumented-atomic.h
bitops: fix kernel-doc parameter name for parity8()
lib: count_zeros: unify count_{leading,trailing}_zeros()
lib: count_zeros: fix 32/64-bit inconsistency in count_trailing_zeros()
lib: crypto: fix comments for count_leading_zeros()
x86/topology: use bitmap_weight_from()
bitmap: add bitmap_weight_from()
lib/find_bit_benchmark: avoid clearing randomly filled bitmap in test_find_first_bit()
...
Implement irqfd that deliver msi to vCPU and vCPU dmsintc irq injection.
Add pch_msi_set_irq() choice dmsintc to set msi irq by the msg_addr and
implement dmsintc set msi irq.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add device model for DMSINTC interrupt controller, implement basic
create/destroy/set_attr interfaces, and register device model to kvm
device table.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
CSR register LOONGARCH_CSR_GSTAT stores guest VMID information. With
existing implementation method, VMID is per vCPU, similar with ASID in
kernel. LOONGARCH_CSR_GSTAT is written at VM entry even if VMID is not
changed.
Here move LOONGARCH_CSR_GSTAT save/restore in vCPU context switch, and
update LOONGARCH_CSR_GSTAT only when VMID is updated at VM entry. At
most time VM enter/exit is much more frequent than vCPU thread context
switch.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
CSR register LOONGARCH_CSR_EENTRY is shared between host CPU and guest
vCPU, KVM need save and restore LOONGARCH_CSR_EENTRY register. Here move
LOONGARCH_CSR_EENTRY saving in to context switch function rather than VM
entry.
At most time VM enter/exit is much more frequent than vCPU thread context
switch.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add kvm_request_pending() checking firstly in kvm_late_check_requests(),
at most time there is no pending request, then the following pending bit
checking can be skipped.
Also embed function kvm_check_pmu() in to kvm_late_check_requests(), and
put it after the kvm_request_pending() checking.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The function reads LOONGARCH_CSR_CRMD but uses CSR_PRMD_PPLV to
extract the privilege level. While both masks have the same value
(0x3), CSR_CRMD_PLV is the semantically correct constant for CRMD.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In function kvm_eiointc_regs_access(), the register base address is
caculated from array base address plus offset, the offset is absolute
value from the base address. The data type of array base address is
u64, it should be converted into the "void *" type and then plus the
offset.
Cc: <stable@vger.kernel.org>
Fixes: d3e43a1f34 ("LoongArch: KVM: Use 64-bit register definition for EIOINTC").
Reported-by: Aurelien Jarno <aurel32@debian.org>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1131431
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
EIOINTC's coremap in eiointc_update_sw_coremap() can be empty, currently
we get a cpuid with -1 in this case, but we actually need 0 because it's
similar as the case that cpuid >= 4.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[].
Cc: <stable@vger.kernel.org>
Fixes: 3956a52bc0 ("LoongArch: KVM: Add EIOINTC read and write functions")
Reported-by: Aurelien Jarno <aurel32@debian.org>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1131431
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
kvm_get_vcpu_by_cpuid() takes a cpuid parameter whose type is int, so
cpuid can be negative. Let kvm_get_vcpu_by_cpuid() return NULL for this
case so as to make it more robust.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[].
Cc: <stable@vger.kernel.org>
Fixes: 73516e9da5 ("LoongArch: KVM: Add vcpu mapping from physical cpuid")
Reported-by: Aurelien Jarno <aurel32@debian.org>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1131431
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The 'leading' helper returns BITS_PER_LONG if x == 0, while 'trailing'
one returns COUNT_TRAILING_ZEROS_0, which turns to be -1.
None of the current users explicitly check the returned value for
COUNT_TRAILING_ZEROS_0, except the loongarch, which tests implicitly
for the '>= 0'.
So, align count_trailing_zeros() with the count_leading_zeros(), and
simplify the loongarch handling.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Most of VM feature detections are integer OR operations, and integer
assignment operation will clear previous integer OR operation. So here
change all integer assignment operations to integer OR operations.
Fixes: 82db90bf46 ("LoongArch: KVM: Move feature detection in kvm_vm_init_features()")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from being
unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end.
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite being
rather unintuitive.
-----BEGIN PGP SIGNATURE-----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=bD3g
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-7.0-rc3' of https://github.com/kvm-x86/linux into HEAD
KVM generic changes for 7.0
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from being
unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end.
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite being
rather unintuitive.
KVM_CAP_SYNC_MMU is provided by KVM's MMU notifiers, which are now always
available. Move the definition from individual architectures to common
code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All architectures now use MMU notifier for KVM page table management.
Remove the Kconfig symbol and the code that is used when it is
disabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
KVM mediated PMU support for 6.20
Add support for mediated PMUs, where KVM gives the guest full ownership of PMU
hardware (contexted switched around the fastpath run loop) and allows direct
access to data MSRs and PMCs (restricted by the vPMU model), but intercepts
access to control registers, e.g. to enforce event filtering and to prevent the
guest from profiling sensitive host state.
To keep overall complexity reasonable, mediated PMU usage is all or nothing
for a given instance of KVM (controlled via module param). The Mediated PMU
is disabled default, partly to maintain backwards compatilibity for existing
setup, partly because there are tradeoffs when running with a mediated PMU that
may be non-starters for some use cases, e.g. the host loses the ability to
profile guests with mediated PMUs, the fastpath run loop is also a blind spot,
entry/exit transitions are more expensive, etc.
Versus the emulated PMU, where KVM is "just another perf user", the mediated
PMU delivers more accurate profiling and monitoring (no risk of contention and
thus dropped events), with significantly less overhead (fewer exits and faster
emulation/programming of event selectors) E.g. when running Specint-2017 on
a single-socket Sapphire Rapids with 56 cores and no-SMT, and using perf from
within the guest:
Perf command:
a. basic-sampling: perf record -F 1000 -e 6-instructions -a --overwrite
b. multiplex-sampling: perf record -F 1000 -e 10-instructions -a --overwrite
Guest performance overhead:
---------------------------------------------------------------------------
| Test case | emulated vPMU | all passthrough | passthrough with |
| | | | event filters |
---------------------------------------------------------------------------
| basic-sampling | 33.62% | 4.24% | 6.21% |
---------------------------------------------------------------------------
| multiplex-sampling | 79.32% | 7.34% | 10.45% |
---------------------------------------------------------------------------
Feature KVM_FEATURE_PREEMPT is added to show whether vCPU is preempted
or not. It is to help guest OS scheduling or lock checking etc. Here
add KVM_FEATURE_PREEMPT feature and use one byte as preempted flag in
the steal time structure.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When in-kernel irqchip is enabled, its register area is registered in
the KVM IO bus list with API kvm_io_bus_register_dev(). In MMIO/IOCSR
register access emulation, kvm_io_bus_read()/kvm_io_bus_write() is
called firstly. If it returns 0, it means that the in-kernel irqchip
handles the emulation already, else it returns to user-mode VMM and
lets VMM emulate the register access.
Once in-kernel irqchip is enabled, it should return 0 if the address
is within range of the registered KVM IO bus. It should not return to
user-mode VMM since VMM does not know how to handle it, and irqchip is
handled in kernel already.
Here set default return value with 0 in KVM IO bus operations.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
FPU/LBT are lazy enabled with KVM hypervisor. After FPU/LBT enabled and
loaded, vCPU can be preempted and FPU/LBT will be lost again, there will
be unnecessary FPU/LBT exceptions, load and store stuff. Here delay the
FPU/LBT load until the guest entry.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Like FPU exception handler, check LBT capability in the LBT exception
handler rather than function kvm_own_lbt().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>