1, Add THREAD_INFO_IN_TASK implementation;
2, Add build salt to the vDSO;
3, Add some BPF JIT inline helpers;
4, Update DTS for I2C clocks and clock-frequency;
5, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=EvQG
-----END PGP SIGNATURE-----
Merge tag 'loongarch-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add THREAD_INFO_IN_TASK implementation
- Add build salt to the vDSO
- Add some BPF JIT inline helpers
- Update DTS for I2C clocks and clock-frequency
- Some bug fixes and other small changes
* tag 'loongarch-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Test jited inline of bpf_get_smp_processor_id() for LoongArch
selftests/bpf: Test jited inline of bpf_get_current_task() for LoongArch
selftests/bpf: Add __arch_loongarch to limit test cases for LoongArch
selftests/bpf: Add get_preempt_count() support for LoongArch
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K2000
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K1000
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K0500
LoongArch: BPF: Inline bpf_get_smp_processor_id() helper
LoongArch: BPF: Inline bpf_get_current_task/_btf() helpers
LoongArch: BPF: Fix off-by-one error in tail call
LoongArch: BPF: Fix outdated tail call comments
LoongArch: Add build salt to the vDSO
LoongArch: Fix nr passing in set_direct_map_valid_noflush()
LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect()
LoongArch: Move struct kimage forward declaration before use
LoongArch: Report dying CPU to RCU in stop_this_cpu()
LoongArch: Add PIO for early access before ACPI PCI root register
LoongArch: Add THREAD_INFO_IN_TASK implementation
set_direct_map_valid_noflush() incorrectly passes 1 to __set_memory()
instead of nr. This causes only the first page's attr to be updated when
nr > 1.
Other architectures all pass nr correctly.
Cc: stable@vger.kernel.org
Fixes: 0c6378a715 ("arch: introduce set_direct_map_valid_noflush()")
Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The generic implementations now suffice; remove the loongarch copy.
Link: https://lore.kernel.org/20260601084845.3792171-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Oscar Salvador (SUSE) <osalvador@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, the memory hot-remove call chain -- arch_remove_memory(),
__remove_pages(), sparse_remove_section() and section_deactivate() -- does
not carry the struct dev_pagemap pointer. This prevents the lower levels
from knowing whether the section was originally populated with vmemmap
optimizations (e.g., DAX with vmemmap optimization enabled).
Without this information, we cannot call vmemmap_can_optimize() to
determine if the vmemmap pages were optimized. As a result, the vmemmap
page accounting during teardown will mistakenly assume a non-optimized
allocation, leading to incorrect memmap statistics.
To lay the groundwork for fixing the vmemmap page accounting, we need to
pass the @pgmap pointer down to the deactivation location. Plumb the
@pgmap argument through the APIs of arch_remove_memory(), __remove_pages()
and sparse_remove_section(), mirroring the corresponding *_activate()
paths.
Link: https://lore.kernel.org/20260428081855.1249045-4-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Liam R. Howlett <liam@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit feee6b2989 ("mm/memory_hotplug: shrink zones when
offlining memory"), __remove_pages() doesn't need the "zone" parameter
so the "page" variable is also unused. Remove the unused code to avoid
such build warning:
arch/loongarch/mm/init.c: In function 'arch_remove_memory':
arch/loongarch/mm/init.c:134:22: warning: variable 'page' set but not used [-Wunused-but-set-variable=]
134 | struct page *page = pfn_to_page(start_pfn);
Cc: <stable@vger.kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
1, Adjust build infrastructure for 32BIT/64BIT;
2, Add HIGHMEM (PKMAP and FIX_KMAP) support;
3, Show and handle CPU vulnerabilites correctly;
4, Batch the icache maintenance for jump_label;
5, Add more atomic instructions support for BPF JIT;
6, Add more features (e.g. fsession) support for BPF trampoline;
7, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=FiFl
-----END PGP SIGNATURE-----
Merge tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust build infrastructure for 32BIT/64BIT
- Add HIGHMEM (PKMAP and FIX_KMAP) support
- Show and handle CPU vulnerabilites correctly
- Batch the icache maintenance for jump_label
- Add more atomic instructions support for BPF JIT
- Add more features (e.g. fsession) support for BPF trampoline
- Some bug fixes and other small changes
* tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (21 commits)
selftests/bpf: Enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch
LoongArch: BPF: Add fsession support for trampolines
LoongArch: BPF: Introduce emit_store_stack_imm64() helper
LoongArch: BPF: Support up to 12 function arguments for trampoline
LoongArch: BPF: Support small struct arguments for trampoline
LoongArch: BPF: Open code and remove invoke_bpf_mod_ret()
LoongArch: BPF: Support load-acquire and store-release instructions
LoongArch: BPF: Support 8 and 16 bit read-modify-write instructions
LoongArch: BPF: Add the default case in emit_atomic() and rename it
LoongArch: Define instruction formats for AM{SWAP/ADD}.{B/H} and DBAR
LoongArch: Batch the icache maintenance for jump_label
LoongArch: Add flush_icache_all()/local_flush_icache_all()
LoongArch: Add spectre boundry for syscall dispatch table
LoongArch: Show CPU vulnerabilites correctly
LoongArch: Make arch_irq_work_has_interrupt() true only if IPI HW exist
LoongArch: Use get_random_canary() for stack canary init
LoongArch: Improve the logging of disabling KASLR
LoongArch: Align FPU register state to 32 bytes
LoongArch: Handle CONFIG_32BIT in syscall_get_arch()
LoongArch: Add HIGHMEM (PKMAP and FIX_KMAP) support
...
LoongArch maintains ICache/DCache coherency by hardware, so we just need
"ibar 0" to avoid instruction hazard here.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add HIGHMEM (High Memory) support for LoongArch, mostly needed by 32BIT
kernel because the size of kernel virtual memory space is only 512MB and
the size of usable physical memory is only 256MB in this case.
HIGHMEM adds permanent kernel mapping (PKMAP) and fixed kernel mapping
(FIX_KMAP), which increase usable physical memory up to 2.25GB (2304MB).
We can just use the generic copy_user_highpage(), so remove the custom
version.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reduce 22 declarations of empty_zero_page to 3 and 23 declarations of
ZERO_PAGE() to 4.
Every architecture defines empty_zero_page that way or another, but for the
most of them it is always a page aligned page in BSS and most definitions
of ZERO_PAGE do virt_to_page(empty_zero_page).
Move Linus vetted x86 definition of empty_zero_page and ZERO_PAGE() to the
core MM and drop these definitions in architectures that do not implement
colored zero page (MIPS and s390).
ZERO_PAGE() remains a macro because turning it to a wrapper for a static
inline causes severe pain in header dependencies.
For the most part the change is mechanical, with these being noteworthy:
* alpha: aliased empty_zero_page with ZERO_PGE that was also used for boot
parameters. Switching to a generic empty_zero_page removes the aliasing
and keeps ZERO_PGE for boot parameters only
* arm64: uses __pa_symbol() in ZERO_PAGE() so that definition of
ZERO_PAGE() is kept intact.
* m68k/parisc/um: allocated empty_zero_page from memblock,
although they do not support zero page coloring and having it in BSS
will work fine.
* sparc64 can have empty_zero_page in BSS rather allocate it, but it
can't use virt_to_page() for BSS. Keep it's definition of ZERO_PAGE()
but instead of allocating it, make mem_map_zero point to
empty_zero_page.
* sh: used empty_zero_page for boot parameters at the very early boot.
Rename the parameters page to boot_params_page and let sh use the generic
empty_zero_page.
* hexagon: had an amusing comment about empty_zero_page
/* A handy thing to have if one has the RAM. Declared in head.S */
that unfortunately had to go :)
Link: https://lkml.kernel.org/r/20260211103141.3215197-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com> [alpha]
Acked-by: Dinh Nguyen <dinguyen@kernel.org> [nios2]
Acked-by: Andreas Larsson <andreas@gaisler.com> [sparc]
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kasan_init_generic() indicates that kasan is fully initialized, so it
should be put at end of kasan_init().
Otherwise bringing up the primary CPU failed when CONFIG_KASAN is set
on PTW-enabled systems, here are the call chains:
kernel_entry()
start_kernel()
setup_arch()
kasan_init()
kasan_init_generic()
The reason is PTW-enabled systems have speculative accesses which means
memory accesses to the shadow memory after kasan_init() may be executed
by hardware before. However, accessing shadow memory is safe only after
kasan fully initialized because kasan_init() uses a temporary PGD table
until we have populated all levels of shadow page tables and writen the
PGD register. Moving kasan_init_generic() later can defer the occasion
of kasan_enabled(), so as to avoid speculative accesses on shadow pages.
After moving kasan_init_generic() to the end, kasan_init() can no longer
call kasan_mem_to_shadow() for shadow address conversion because it will
always return kasan_early_shadow_page. On the other hand, we should keep
the current logic of kasan_mem_to_shadow() for both the early and final
stage because there may be instrumentation before kasan_init().
To solve this, we factor out a new mem_to_shadow() function from current
kasan_mem_to_shadow() for the shadow address conversion in kasan_init().
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
According to Documentation/dev-tools/kasan.rst, software KASAN modes use
compiler instrumentation to insert validity checks. Such instrumentation
might be incompatible with some parts of the kernel, and therefore needs
to be disabled, just use the attribute __no_sanitize_address to disable
instrumentation for the low level function setup_ptwalker().
Otherwise bringing up the secondary CPUs failed when CONFIG_KASAN is set
(especially when PTW is enabled), here are the call chains:
smpboot_entry()
start_secondary()
cpu_probe()
per_cpu_trap_init()
tlb_init()
setup_tlb_handler()
setup_ptwalker()
The reason is the PGD registers are configured in setup_ptwalker(), but
KASAN instrumentation may cause TLB exceptions before that.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
There are declarations of the variable "eentry", "pcpu_handlers[]" and
"exception_handlers[]" in asm/setup.h, the source files already include
this header file directly or indirectly, so no need to declare them in
the source files, just remove the code.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
To initialize node, zone and memory map data structures every architecture
calls free_area_init() during setup_arch() and passes it an array of zone
limits.
Beside code duplication it creates "interesting" ordering cases between
allocation and initialization of hugetlb and the memory map. Some
architectures allocate hugetlb pages very early in setup_arch() in certain
cases, some only create hugetlb CMA areas in setup_arch() and sometimes
hugetlb allocations happen mm_core_init().
With arch_zone_limits_init() helper available now on all architectures it
is no longer necessary to call free_area_init() from architecture setup
code. Rather core MM initialization can call arch_zone_limits_init() in a
single place.
This allows to unify ordering of hugetlb vs memory map allocation and
initialization.
Remove the call to free_area_init() from architecture specific code and
place it in a new mm_core_init_early() function that is called immediately
after setup_arch().
After this refactoring it is possible to consolidate hugetlb allocations
and eliminate differences in ordering of hugetlb and memory map
initialization among different architectures.
As the first step of this consolidation move hugetlb_bootmem_alloc() to
mm_core_early_init().
Link: https://lkml.kernel.org/r/20260111082105.290734-24-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move calculations of zone limits to a dedicated arch_zone_limits_init()
function.
Later MM core will use this function as an architecture specific callback
during nodes and zones initialization and thus there won't be a need to
call free_area_init() from every architecture.
Link: https://lkml.kernel.org/r/20260111082105.290734-9-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For 32BIT platform _PAGE_PROTNONE is 0, so set a VMA to be VM_NONE or
VM_SHARED will make pages non-present, then cause Oops with kernel page
fault.
Fix it by set correct protection_map[] for VM_NONE/VM_SHARED, replacing
_PAGE_PROTNONE with _PAGE_PRESENT.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
32BIT platforms only have 32bit CSR/IOCSR registers, 64BIT platforms
have both 32bit/64bit CSR/IOCSR registers. Now there are both 32bit and
64bit CSR accessors:
csr_read32()/csr_write32()/csr_xchg32();
csr_read64()/csr_write64()/csr_xchg64();
Some CSR registers (address and timer registers) are 32bit length on
32BIT platform and 64bit length on 64BIT platform. To avoid #ifdefs here
and there, they need adaptive accessors, so we define and use:
csr_read()/csr_write()/csr_xchg();
IOCSR doesn't have a "natural length", which means a 64bit register can
be treated as two 32bit registers, so we just use two 32bit accessors to
emulate a 64bit accessors.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Now there 5 places which calculate max_pfn & max_low_pfn:
1. in fdt_setup() for FDT systems;
2. in memblock_init() for ACPI systems;
3. in init_numa_memory() for NUMA systems;
4. in arch_mem_init() to recalculate for "mem=" cmdline;
5. in paging_init() to recalculate for NUMA systems.
Since memblock_init() is called both for ACPI and FDT systems, move the
calculation out of the for_each_efi_memory_desc() loop can eliminate the
first case. The last case is very questionable (may be derived from the
MIPS/Loongson code) and breaks the "mem=" cmdline, so should be removed.
And then the NUMA version of paging_init() can be also eliminated.
After consolidation there are 3 places of calculation:
1. in memblock_init() for both ACPI and FDT systems;
2. in init_numa_memory() to recalculate for NUMA systems;
3. in arch_mem_init() to recalculate for the "mem=" cmdline.
For all cases the calculation is:
max_pfn = PFN_DOWN(memblock_end_of_DRAM());
max_low_pfn = min(PFN_DOWN(HIGHMEM_START), max_pfn);
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
1. Use phys_addr_t instead of u64, which can work for both 32/64 bits.
2. Check whether the input physical address is above TO_PHYS_MASK (and
return NULL if yes) for the DMW version.
Note: In theory early_ioremap() also need the TO_PHYS_MASK checking, but
the UEFI BIOS pass some DMW virtual addresses.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Attempt VMA lock-based page fault handling first, and fall back to the
existing mmap_lock-based handling if that fails.
The "ebizzy -mTRp" test on Loongson-3A6000 shows that PER_VMA_LOCK can
improve the benchmark by about 17.9% (97837.7 to 115430.8).
This is the LoongArch variant of "x86/mm: try VMA lock-based page fault
handling first".
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Patch series "kasan: unify kasan_enabled() and remove arch-specific
implementations", v6.
This patch series addresses the fragmentation in KASAN initialization
across architectures by introducing a unified approach that eliminates
duplicate static keys and arch-specific kasan_arch_is_ready()
implementations.
The core issue is that different architectures have inconsistent approaches
to KASAN readiness tracking:
- PowerPC, LoongArch, and UML arch, each implement own kasan_arch_is_ready()
- Only HW_TAGS mode had a unified static key (kasan_flag_enabled)
- Generic and SW_TAGS modes relied on arch-specific solutions
or always-on behavior
This patch (of 2):
Introduce CONFIG_ARCH_DEFER_KASAN to identify architectures [1] that need
to defer KASAN initialization until shadow memory is properly set up, and
unify the static key infrastructure across all KASAN modes.
[1] PowerPC, UML, LoongArch selects ARCH_DEFER_KASAN.
The core issue is that different architectures haveinconsistent approaches
to KASAN readiness tracking:
- PowerPC, LoongArch, and UML arch, each implement own
kasan_arch_is_ready()
- Only HW_TAGS mode had a unified static key (kasan_flag_enabled)
- Generic and SW_TAGS modes relied on arch-specific solutions or always-on
behavior
This patch addresses the fragmentation in KASAN initialization across
architectures by introducing a unified approach that eliminates duplicate
static keys and arch-specific kasan_arch_is_ready() implementations.
Let's replace kasan_arch_is_ready() with existing kasan_enabled() check,
which examines the static key being enabled if arch selects
ARCH_DEFER_KASAN or has HW_TAGS mode support. For other arch,
kasan_enabled() checks the enablement during compile time.
Now KASAN users can use a single kasan_enabled() check everywhere.
Link: https://lkml.kernel.org/r/20250810125746.1105476-1-snovitoll@gmail.com
Link: https://lkml.kernel.org/r/20250810125746.1105476-2-snovitoll@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217049
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> #powerpc
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: David Gow <davidgow@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Marco Elver <elver@google.com>
Cc: Qing Zhang <zhangqing@loongson.cn>
Cc: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
walk_page_range_novma() is rather confusing - it supports two modes, one
used often, the other used only for debugging.
The first mode is the common case of traversal of kernel page tables,
which is what nearly all callers use this for.
Secondly it provides an unusual debugging interface that allows for the
traversal of page tables in a userland range of memory even for that
memory which is not described by a VMA.
It is far from certain that such page tables should even exist, but
perhaps this is precisely why it is useful as a debugging mechanism.
As a result, this is utilised by ptdump only. Historically, things were
reversed - ptdump was the only user, and other parts of the kernel evolved
to use the kernel page table walking here.
Since we have some complicated and confusing locking rules for the novma
case, it makes sense to separate the two usages into their own functions.
Doing this also provide self-documentation as to the intent of the caller
- are they doing something rather unusual or are they simply doing a
standard kernel page table walk?
We therefore establish two separate functions - walk_page_range_debug()
for this single usage, and walk_kernel_page_table_range() for general
kernel page table walking.
The walk_page_range_debug() function is currently used to traverse both
userland and kernel mappings, so we maintain this and in the case of
kernel mappings being traversed, we have walk_page_range_debug() invoke
walk_kernel_page_table_range() internally.
We additionally make walk_page_range_debug() internal to mm.
Link: https://lkml.kernel.org/r/20250605135104.90720-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Barry Song <baohua@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the KCOV is enabled all functions get instrumented, unless
the __no_sanitize_coverage attribute is used. To prepare for
__no_sanitize_coverage being applied to __init functions, we have to
handle differences in how GCC's inline optimizations get resolved.
For LoongArch this exposed several places where __init annotations
were missing but ended up being "accidentally correct". So fix these
cases.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
1, Adjust the 'make install' operation;
2, Support SCHED_MC (Multi-core scheduler);
3, Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS;
4, Enable HAVE_ARCH_STACKLEAK;
5, Increase max supported CPUs up to 2048;
6, Introduce the numa_memblks conversion;
7, Add PWM controller nodes in dts;
8, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmhEEh8WHGNoZW5odWFj
YWlAa2VybmVsLm9yZwAKCRAChivD8uImenIIEACT43zpQD6lApWZ8tk8dVYXK6Lb
pKqXLIhAe9g9cSDC6QfwUTwOjv5RZxJBXgKkQfYSSd3ZEZ6hQIqb2JVYMMpNy6WA
I5fJ75pr/E6RMtueg5laYxJ/zLJMM5F2qK/Moff7JGeUuDU5BJEG0R7j7KEhtgo0
5Cm+ktS7waJhNuJposa/Eay6IDWH9Of2UoNboPWmMfLvuZbIp9f1HpjwpZF6xnZ/
xeIhVOcJw8Xft/0xrcx1xZt/nYnJflNwLgaa7/CGa2q1X7yxVarfMUcY63x6cZXX
7jLppejqptPqixf+JFRGKBr8Y82Vu/1TW7XlKaywKrjHPZ/FXJsU682x6SQy2uac
nOiu38qCc5DA9pKB57zxL/5DqTn+yAPGpnC//HvF9/koWCOI6lA5bYzSbBwmkpm7
DS7mVKtfPTicUs5fZ7DsHRjXuyqs6i1+s7wNaTkgG4Y/gBNAffHa36ON5jM5Wzzz
WJGcMEIG0Or6tt/yUVrzY390aYzIOkyAoWJgUQ+tPCXecyjnor9i5P3ZC66dIm2r
UTbC7mX4+bBa/MA1xKKMmCHdJtMzO2A+tduZRf/lO8iYs4c6IJBBaXhW9xHxf8tT
Av/sXnShJWsrRW40g6Kp85ghDcLBS6SLBm5Ux5OLd2byWIeeF/R2BHdF6qb4V3j6
Y2ZHk1ewvLgB0BQ/ww==
=FH8x
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust the 'make install' operation
- Support SCHED_MC (Multi-core scheduler)
- Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
- Enable HAVE_ARCH_STACKLEAK
- Increase max supported CPUs up to 2048
- Introduce the numa_memblks conversion
- Add PWM controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
platform/loongarch: laptop: Add backlight power control support
platform/loongarch: laptop: Get brightness setting from EC on probe
LoongArch: dts: Add PWM support to Loongson-2K2000
LoongArch: dts: Add PWM support to Loongson-2K1000
LoongArch: dts: Add PWM support to Loongson-2K0500
LoongArch: vDSO: Correctly use asm parameters in syscall wrappers
LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
LoongArch: Preserve firmware configuration when desired
LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg
LoongArch: Introduce the numa_memblks conversion
LoongArch: Increase max supported CPUs up to 2048
LoongArch: Enable HAVE_ARCH_STACKLEAK
LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
LoongArch: Add SCHED_MC (Multi-core scheduler) support
LoongArch: Add some annotations in archhelp
LoongArch: Using generic scripts/install.sh in `make install`
LoongArch: Add a default install.sh
ERROR INFO:
CPU 25 Unable to handle kernel paging request at virtual address 0x0
...
Call Trace:
[<900000000023c30c>] huge_pte_offset+0x3c/0x58
[<900000000057fd4c>] hugetlb_follow_page_mask+0x74/0x438
[<900000000051fee8>] __get_user_pages+0xe0/0x4c8
[<9000000000522414>] faultin_page_range+0x84/0x380
[<9000000000564e8c>] madvise_vma_behavior+0x534/0xa48
[<900000000056689c>] do_madvise+0x1bc/0x3e8
[<9000000000566df4>] sys_madvise+0x24/0x38
[<90000000015b9e88>] do_syscall+0x78/0x98
[<9000000000221f18>] handle_syscall+0xb8/0x158
In some cases, pmd may be NULL and rely on NULL as the return value for
processing, so it is necessary to determine this situation here.
Cc: stable@vger.kernel.org
Fixes: bd51834d1c ("LoongArch: Return NULL from huge_pte_offset() for invalid PMD")
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Commit 8748270821 ("mm: introduce numa_memblks") has moved
numa_memblks from x86 to the generic code, but LoongArch was left out
of this conversion.
This patch introduces the generic numa_memblks for LoongArch.
In detail:
1. Enable NUMA_MEMBLKS (but disable NUMA_EMU) in Kconfig;
2. Use generic definition for numa_memblk and numa_meminfo;
3. Use generic implementation for numa_add_memblk() and its friends;
4. Use generic implementation for numa_set_distance() and its friends;
5. Use generic implementation for memory_add_physaddr_to_nid() and its
friends.
Note: Disable NUMA_EMU because it needs more efforts and no obvious
demand now.
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
There are now no callers of mk_huge_pmd() and mk_pmd(). Remove them.
Link: https://lkml.kernel.org/r/20250402181709.2386022-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot
even if the underlying entry points to invalid_pte_table (indicating no
mapping). Callers like smaps_hugetlb_range() fetch this invalid entry
value (the address of invalid_pte_table) via this pointer.
The generic is_swap_pte() check then incorrectly identifies this address
as a swap entry on LoongArch, because it satisfies the "!pte_present()
&& !pte_none()" conditions. This misinterpretation, combined with a
coincidental match by is_migration_entry() on the address bits, leads to
kernel crashes in pfn_swap_entry_to_page().
Fix this at the architecture level by modifying huge_pte_offset() to
check the PMD entry's content using pmd_none() before returning. If the
entry is invalid (i.e., it points to invalid_pte_table), return NULL
instead of the pointer to the slot.
Cc: stable@vger.kernel.org
Acked-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Remove dead code. LoongArch does not have a DMA memory zone (24bit DMA).
The architecture does not even define MAX_DMA_PFN.
Cc: stable@vger.kernel.org
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The point where the memory is released from memblock to the buddy
allocator is hidden inside arch-specific mem_init()s and the call to
memblock_free_all() is needlessly duplicated in every artiste cure and
after introduction of arch_mm_preinit() hook, mem_init() implementation on
many architecture only contains the call to memblock_free_all().
Pull memblock_free_all() call into mm_core_init() and drop mem_init() on
relevant architectures to make it more explicit where the free memory is
released from memblock to the buddy allocator and to reduce code
duplication in architecture specific code.
Link: https://lkml.kernel.org/r/20250313135003.836600-14-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Guo Ren (csky) <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
high_memory defines upper bound on the directly mapped memory. This bound
is defined by the beginning of ZONE_HIGHMEM when a system has high memory
and by the end of memory otherwise.
All this is known to generic memory management initialization code that
can set high_memory while initializing core mm structures.
Add a generic calculation of high_memory to free_area_init() and remove
per-architecture calculation except for the architectures that set and use
high_memory earlier than that.
Link: https://lkml.kernel.org/r/20250313135003.836600-11-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86]
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Guo Ren (csky) <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
max_mapnr is essentially the size of the memory map for systems that use
FLATMEM. There is no reason to calculate it in each and every architecture
when it's anyway calculated in alloc_node_mem_map().
Drop setting of max_mapnr from architecture code and set it once in
alloc_node_mem_map().
While on it, move definition of mem_map and max_mapnr to mm/mm_init.c so
there won't be two copies for MMU and !MMU variants.
Link: https://lkml.kernel.org/r/20250313135003.836600-10-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86]
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Guo Ren (csky) <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now kernel_page_present() always return true for KPRANGE/XKPRANGE
addresses, this isn't correct because hibernation (ACPI S4) use it
to distinguish whether a page is saveable. If all KPRANGE/XKPRANGE
addresses are considered as saveable, then reserved memory such as
EFI_RUNTIME_SERVICES_CODE / EFI_RUNTIME_SERVICES_DATA will also be
saved and restored.
Fix this by returning true only if the KPRANGE/XKPRANGE address is in
memblock.memory.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Before SLUB initialization, various subsystems used memblock_alloc to
allocate memory. In most cases, when memory allocation fails, an
immediate panic is required. To simplify this behavior and reduce
repetitive checks, introduce `memblock_alloc_or_panic`. This function
ensures that memory allocation failures result in a panic automatically,
improving code readability and consistency across subsystems that require
this behavior.
[guoweikang.kernel@gmail.com: arch/s390: save_area_alloc default failure behavior changed to panic]
Link: https://lkml.kernel.org/r/20250109033136.2845676-1-guoweikang.kernel@gmail.com
Link: https://lore.kernel.org/lkml/Z2fknmnNtiZbCc7x@kernel.org/
Link: https://lkml.kernel.org/r/20250102072528.650926-1-guoweikang.kernel@gmail.com
Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We already have a generic implementation of alloc/free up to P4D level, as
well as pgd_free(). Let's finish the work and add a generic PGD-level
alloc helper as well.
Unlike at lower levels, almost all architectures need some specific magic
at PGD level (typically initialising PGD entries), so introducing a
generic pgd_alloc() isn't worth it. Instead we introduce two new helpers,
__pgd_alloc() and __pgd_free(), and make use of them in the arch-specific
pgd_alloc() and pgd_free() wherever possible. To accommodate as many arch
as possible, __pgd_alloc() takes a page allocation order.
Because pagetable_alloc() allocates zeroed pages, explicit zeroing in
pgd_alloc() becomes redundant and we can get rid of it. Some trivial
implementations of pgd_free() also become unnecessary once __pgd_alloc()
is used; remove them.
Another small improvement is consistent accounting of PGD pages by using
GFP_PGTABLE_{USER,KERNEL} as appropriate.
Not all PGD allocations can be handled by the generic helpers. In
particular, multiple architectures allocate PGDs from a kmem_cache, and
those PGDs may not be page-sized.
Link: https://lkml.kernel.org/r/20250103184415.2744423-6-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
1, Fix build failure with GCC 15 (-std=gnu23);
2, Add PREEMPT_RT/PREEMPT_LAZY support;
3, Add I2S in DTS for Loongson-2K1000/Loongson-2K2000;
4, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=Dqic
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Fix build failure with GCC 15 due to default -std=gnu23
- Add PREEMPT_RT/PREEMPT_LAZY support
- Add I2S in DTS for Loongson-2K1000/Loongson-2K2000
- Some bug fixes and other small changes
* tag 'loongarch-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: dts: Add I2S support to Loongson-2K2000
LoongArch: dts: Add I2S support to Loongson-2K1000
LoongArch: Allow to enable PREEMPT_LAZY
LoongArch: Allow to enable PREEMPT_RT
LoongArch: Select HAVE_POSIX_CPU_TIMERS_TASK_WORK
LoongArch: Fix sleeping in atomic context for PREEMPT_RT
LoongArch: Reduce min_delta for the arch clockevent device
LoongArch: BPF: Sign-extend return values
LoongArch: Fix build failure with GCC 15 (-std=gnu23)
LoongArch: Explicitly specify code model in Makefile
Sergey Senozhatsky improves zram's post-processing selection algorithm.
This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of shadow
entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in the
hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page into
small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio size
rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel Butt
removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations" from
Mike Rapoport teaches x86 to use large pages for read-only-execute
module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in tests
over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a single
VMA, rather than requiring that multiple VMAs be created for this.
Improved efficiencies for userspace memory allocators are expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP from
the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep is
enabled.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzwFqgAKCRDdBJ7gKXxA
jkeuAQCkl+BmeYHE6uG0hi3pRxkupseR6DEOAYIiTv0/l8/GggD/Z3jmEeqnZaNq
xyyenpibWgUoShU2wZ/Ha8FE5WDINwg=
=JfWR
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
Currently, the kernel couldn't boot when ARCH_IOREMAP, ARCH_WRITECOMBINE
and KASAN are enabled together. Because DMW2 is used by kernel now which
is configured as 0xa000000000000000 for WriteCombine, but KASAN has no
segment mapping for it. This patch fix this issue.
Solution: Add the relevant definitions for WriteCombine (DMW2) in KASAN.
Cc: stable@vger.kernel.org
Fixes: 8e02c3b782 ("LoongArch: Add writecombine support for DMW-based ioremap()")
Signed-off-by: Kanglong Wang <wangkanglong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
If PGDIR_SIZE is too large for cpu_vabits, KASAN_SHADOW_END will
overflow UINTPTR_MAX because KASAN_SHADOW_START/KASAN_SHADOW_END are
aligned up by PGDIR_SIZE. And then the overflowed KASAN_SHADOW_END looks
like a user space address.
For example, PGDIR_SIZE of CONFIG_4KB_4LEVEL is 2^39, which is too large
for Loongson-2K series whose cpu_vabits = 39.
Since CONFIG_4KB_4LEVEL is completely legal for CPUs with cpu_vabits <=
39, we just disable KASAN via early return in kasan_init(). Otherwise we
get a boot failure.
Moreover, we change KASAN_SHADOW_END from the first address after KASAN
shadow area to the last address in KASAN shadow area, in order to avoid
the end address exactly overflow to 0 (which is a legal case). We don't
need to worry about alignment because pgd_addr_end() can handle it.
Cc: stable@vger.kernel.org
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Make KASAN work with 5-level page-tables, including:
1. Implement and use __pgd_none() and kasan_p4d_offset().
2. As done in kasan_pmd_populate() and kasan_pte_populate(), restrict
the loop conditions of kasan_p4d_populate() and kasan_pud_populate()
to avoid unnecessary population.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add an API that will allow updates of the direct/linear map for a set of
physically contiguous pages.
It will be used in the following patches.
Link: https://lkml.kernel.org/r/20241023162711.2579610-6-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: kdevops <kdevops@lists.linux.dev>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Song Liu <song@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are two pages in one TLB entry on LoongArch system. For kernel
space, it requires both two pte entries (buddies) with PAGE_GLOBAL bit
set, otherwise HW treats it as non-global tlb, there will be potential
problems if tlb entry for kernel space is not global. Such as fail to
flush kernel tlb with the function local_flush_tlb_kernel_range() which
supposed only flush tlb with global bit.
Kernel address space areas include percpu, vmalloc, vmemmap, fixmap and
kasan areas. For these areas both two consecutive page table entries
should be enabled with PAGE_GLOBAL bit. So with function set_pte() and
pte_clear(), pte buddy entry is checked and set besides its own pte
entry. However it is not atomic operation to set both two pte entries,
there is problem with test_vmalloc test case.
So function kernel_pte_init() is added to init a pte table when it is
created for kernel address space, and the default initial pte value is
PAGE_GLOBAL rather than zero at beginning. Then only its own pte entry
need update with function set_pte() and pte_clear(), nothing to do with
the pte buddy entry.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
1, Fix objtool about do_syscall() and Clang;
2, Enable generic CPU vulnerabilites support;
3, Enable ACPI BGRT handling;
4, Rework CPU feature probe from CPUCFG/IOCSR;
5, Add ARCH_HAS_SET_MEMORY support;
6, Add ARCH_HAS_SET_DIRECT_MAP support;
7, Improve hardware page table walker;
8, Simplify _percpu_read() and _percpu_write();
9, Add advanced extended IRQ model documentions;
10, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=JyR/
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Fix objtool about do_syscall() and Clang
- Enable generic CPU vulnerabilites support
- Enable ACPI BGRT handling
- Rework CPU feature probe from CPUCFG/IOCSR
- Add ARCH_HAS_SET_MEMORY support
- Add ARCH_HAS_SET_DIRECT_MAP support
- Improve hardware page table walker
- Simplify _percpu_read() and _percpu_write()
- Add advanced extended IRQ model documentions
- Some bug fixes and other small changes
* tag 'loongarch-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
Docs/LoongArch: Add advanced extended IRQ model description
LoongArch: Remove posix_types.h include from sigcontext.h
LoongArch: Fix memleak in pci_acpi_scan_root()
LoongArch: Simplify _percpu_read() and _percpu_write()
LoongArch: Improve hardware page table walker
LoongArch: Add ARCH_HAS_SET_DIRECT_MAP support
LoongArch: Add ARCH_HAS_SET_MEMORY support
LoongArch: Rework CPU feature probe from CPUCFG/IOCSR
LoongArch: Enable ACPI BGRT handling
LoongArch: Enable generic CPU vulnerabilites support
LoongArch: Remove STACK_FRAME_NON_STANDARD(do_syscall)
LoongArch: Set AS_HAS_THIN_ADD_SUB as y if AS_IS_LLVM
LoongArch: Enable objtool for Clang
objtool: Handle frame pointer related instructions
LoongArch has similar problems explained in commit 7f0b1bf045
("arm64: Fix barriers used for page table modifications"), when hardware
page table walker (PTW) enabled, speculative accesses may cause spurious
page fault in kernel space. Theoretically, in order to completely avoid
spurious page fault we need a "dbar + ibar" pair between the page table
modifications and the subsequent memory accesses using the corresponding
virtual address. But "ibar" is too heavy for performace, so we only use
a "dbar 0b11000" in set_pte(). And let spurious_fault() filter the rest
rare spurious page faults which should be avoided by "ibar".
Besides, we replace the llsc loop with amo in set_pte() which has better
performace, and refactor mmu_context.h to 1) avoid any load/store/branch
instructions between the writing of CSR.ASID & CSR.PGDL, 2) ensure flush
tlb operation is after updating ASID.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add set_direct_map_*() functions for setting the direct map alias for
the page to its default permissions and to an invalid state that cannot
be cached in a TLB. (See d253ca0c3 ("x86/mm/cpa: Add set_direct_map_*()
functions")) Add a similar implementation for LoongArch.
This fixes the KFENCE warnings during hibernation:
==================================================================
BUG: KFENCE: invalid read in swsusp_save+0x368/0x4d8
Invalid read at 0x00000000f7b89a3c:
swsusp_save+0x368/0x4d8
hibernation_snapshot+0x3f0/0x4e0
hibernate+0x20c/0x440
state_store+0x128/0x140
kernfs_fop_write_iter+0x160/0x260
vfs_write+0x2c0/0x520
ksys_write+0x74/0x160
do_syscall+0xb0/0x160
CPU: 0 UID: 0 PID: 812 Comm: bash Tainted: G B 6.11.0-rc1+ #1566
Tainted: [B]=BAD_PAGE
Hardware name: Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.0 10/21/2022
==================================================================
Note: We can only set permissions for KVRANGE/XKVRANGE kernel addresses.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add set_memory_ro/rw/x/nx architecture hooks to change the page
attribution.
Use own set_memory.h rather than generic set_memory.h (i.e.
include/asm-generic/set_memory.h), because we want to add other function
prototypes here.
Note: We can only set attributes for KVRANGE/XKVRANGE kernel addresses.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>