When a dpll_pin is shared across multiple dpll_device instances and
those devices are being unregistered (e.g. during driver module removal),
a NULL pointer dereference can occur in dpll_msg_add_pin_ref_sync().
This happens under the following conditions:
- A pin is registered with two or more dpll devices (dpll_A, dpll_B)
- The pin has ref_sync pairs with other pins
- During unregistration of dpll_A's pins, a ref_sync partner pin is
unregistered first, removing it from dpll_A->pin_refs
- But since the partner pin is still registered with dpll_B, its
dpll_refs is not empty, so dpll_pin_ref_sync_pair_del() does NOT
run and the partner stays in the pin's ref_sync_pins xarray
- When the pin itself is then unregistered from dpll_A, the delete
notification calls dpll_msg_add_pin_ref_sync() which finds the
partner in ref_sync_pins, passes dpll_pin_available() (partner is
still registered with dpll_B), but dpll_pin_on_dpll_priv(dpll_A,
partner) returns NULL because partner was already removed from
dpll_A->pin_refs
- The NULL priv pointer is passed to the driver's ref_sync_get
callback, which dereferences it
BUG: kernel NULL pointer dereference, address: 0000000000000034
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:zl3073x_dpll_input_pin_ref_sync_get+0x73/0x80 [zl3073x]
Call Trace:
dpll_msg_add_pin_ref_sync+0xb8/0x200
dpll_cmd_pin_get_one+0x3b6/0x4b0
dpll_pin_event_send+0x72/0x140
__dpll_pin_unregister+0x5a/0x2b0
dpll_pin_unregister+0x49/0x70
Fix this by skipping ref_sync pins whose priv pointer cannot be resolved
for the current dpll device.
Fixes: 58256a26bf ("dpll: add reference sync get/set")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260710193625.1378822-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pins registered with an fwnode may have .state_on_dpll_set implemented
without advertising DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE upfront.
Requiring the bit for fwnode pins ties firmware description to driver
implementation details unnecessarily.
Relax the capability check in dpll_pin_state_set() and
dpll_pin_on_pin_state_set(): when a pin has an associated fwnode, bypass
the capability gate and let the ops layer decide, returning -EOPNOTSUPP
if .state_on_dpll_set is absent. Non-fwnode pins retain the original
strict behavior.
This is used later in the series by the SyncE_Ref output pin, which
relies on the fwnode path for state control.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-10-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the DPLL pin notification API to include a source identifier
indicating where the notification originates. This allows notifier
consumers to distinguish between notifications coming from
an associated DPLL instance, a parent pin, or the pin itself.
A new field, src_clock_id, is added to struct dpll_pin_notifier_info
and is passed through all pin-related notification paths. Callers of
dpll_pin_notify() are updated to provide a meaningful source identifier
based on their context:
- pin registration/unregistration uses the DPLL's clock_id,
- pin-on-pin operations use the parent pin's clock_id,
- pin changes use the pin's own clock_id.
As introduced in the commit ("dpll: allow registering FW-identified pin
with a different DPLL"), it is possible to share the same physical pin
via firmware description (fwnode) with DPLL objects from different
kernel modules. This means that a given pin can be registered multiple
times.
Driver such as ICE (E825 devices) rely on this mechanism when listening
for the event where a shared-fwnode pin appears, while avoiding reacting
to events triggered by their own registration logic.
This change only extends the notification metadata and does not alter
existing semantics for drivers that do not use the new field.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-9-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Relax the (module, clock_id) equality requirement when registering a
pin identified by firmware (pin->fwnode). Some platforms associate a
FW-described pin with a DPLL instance that differs from the pin's
(module, clock_id) tuple. For such pins, permit registration without
requiring the strict match. Non-FW pins still require equality.
Keep netlink pin module reporting/filtering safe for this relaxed
registration model by caching the module name in the pin object at
allocation time and using the cached string in netlink paths.
This avoids dereferencing pin->module after provider module teardown.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-3-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Export __dpll_device_change_ntf() so that drivers can send device
change notifications from within device callbacks, which are already
called under dpll_lock. Using dpll_device_change_ntf() in that
context would deadlock.
Add lockdep_assert_held() to catch misuse without the lock held.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260526074525.1451008-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We plan to no longer hold RTNL in "ip link show", and use RCU instead.
Assume rtnl_fill_dpll_pin() will have to fill DPLL_A_PIN_ID.
It is fine to over-estimate skb size (by 8 bytes) in if_nlmsg_size().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260521171440.114956-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add both fractional-frequency-offset (PPM) and
fractional-frequency-offset-ppt (PPT) attributes to the
pin-parent-device nested attribute set, alongside the existing
top-level pin attributes. Both carry the same measurement at
different precisions.
Introduce enum dpll_ffo_type and struct dpll_ffo_param to
distinguish FFO contexts: DPLL_FFO_PORT_RXTX_RATE for the RX vs
TX symbol rate offset reported at the top level, and
DPLL_FFO_PIN_DEVICE for the pin vs parent DPLL offset reported
in the pin-parent-device nest.
Add a supported_ffo bitmask to struct dpll_pin_ops so drivers
declare which FFO types they support. The core only calls ffo_get
for types the driver has opted into, eliminating the need for
per-driver NULL pointer guards. Validate at pin registration time
that supported_ffo is not set without an ffo_get callback.
Update mlx5 (DPLL_FFO_PORT_RXTX_RATE) and zl3073x
(DPLL_FFO_PORT_RXTX_RATE) drivers to use the new API.
Add documentation for both FFO types to dpll.rst.
Changes v3 -> v4:
- Replace dpll=NULL overloading with enum dpll_ffo_type and
struct dpll_ffo_param (Jakub Kicinski)
- Add supported_ffo opt-in bitmask in dpll_pin_ops for fail-close
driver validation (Jakub Kicinski)
- Add WARN_ON in dpll_pin_register for supported_ffo without
ffo_get callback
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260511155816.99936-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add pin-operstate enum and operstate_on_dpll_get callback to report
the actual hardware status of a pin with respect to its parent DPLL
device. Unlike pin-state (which reflects administrative intent set
by the user), operstate reflects what the hardware is actually doing.
Defined operational states:
- active: pin is qualified and actively used by the DPLL
- standby: pin is qualified but not actively used by the DPLL
- no-signal: pin does not have a valid signal
- qual-failed: pin signal failed qualification
The operstate is reported inside the pin-parent-device nested
attribute alongside the existing state and phase-offset attributes.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Petr Oros <poros@redhat.com>
Link: https://patch.msgid.link/20260428154907.2820654-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Export __dpll_pin_change_ntf() so that drivers can send pin change
notifications from within pin callbacks, which are already called
under dpll_lock. Using dpll_pin_change_ntf() in that context would
deadlock.
Add lockdep_assert_held() to catch misuse without the lock held.
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-9-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new callback operations for a dpll device:
- freq_monitor_get(..) - to obtain current state of frequency monitor
feature from dpll device,
- freq_monitor_set(..) - to allow feature configuration.
Add new callback operation for a dpll pin:
- measured_freq_get(..) - to obtain the measured frequency in mHz.
Obtain the feature state value using the get callback and provide it to
the user if the device driver implements callbacks. The measured_freq_get
pin callback is only invoked when the frequency monitor is enabled.
The freq_monitor_get device callback is required when measured_freq_get
is provided by the driver.
Execute the set callback upon user requests.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260402184057.1890514-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the DPLL subsystem reports events (creation, deletion, changes)
to userspace via Netlink. However, there is no mechanism for other kernel
components to be notified of these events directly.
Add a raw notifier chain to the DPLL core protected by dpll_lock. This
allows other kernel subsystems or drivers to register callbacks and
receive notifications when DPLL devices or pins are created, deleted,
or modified.
Define the following:
- Registration helpers: {,un}register_dpll_notifier()
- Event types: DPLL_DEVICE_CREATED, DPLL_PIN_CREATED, etc.
- Context structures: dpll_{device,pin}_notifier_info to pass relevant
data to the listeners.
The notification chain is invoked alongside the existing Netlink event
generation to ensure in-kernel listeners are kept in sync with the
subsystem state.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-4-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the dpll subsystem exports the fractional frequency offset
(FFO) in parts per million (ppm). This granularity is insufficient for
high-precision synchronization scenarios which often require parts per
trillion (ppt) resolution.
Add a new netlink attribute DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET_PPT
to expose the FFO in ppt.
Update the dpll netlink core to expect the driver-provided FFO value
to be in ppt. To maintain backward compatibility with existing userspace
tools, populate the legacy DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET
attribute by dividing the new ppt value by 1,000,000.
Update the zl3073x and mlx5 drivers to provide the FFO value in ppt:
- zl3073x: adjust the fixed-point calculation to produce ppt (10^12)
instead of ppm (10^6).
- mlx5: scale the existing ppm value by 1,000,000.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260126162253.27890-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, userspace can retrieve the DPLL working mode but cannot
configure it. This prevents changing the device operation, such as
switching from manual to automatic mode and vice versa.
Add a new callback .mode_set() to struct dpll_device_ops. Extend
the netlink policy and device-set command handling to process
the DPLL_A_MODE attribute. Update the netlink YAML specification
to include the mode attribute in the device-set operation.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260114122726.120303-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the DPLL subsystem assumes that the only supported mode is
the one currently active on the device. When dpll_msg_add_mode_supported()
is called, it relies on ops->mode_get() and reports that single mode
to userspace. This prevents users from discovering other modes the device
might be capable of.
Add a new callback .supported_modes_get() to struct dpll_device_ops. This
allows drivers to populate a bitmap indicating all modes supported by
the hardware.
Update dpll_msg_add_mode_supported() to utilize this new callback:
* if ops->supported_modes_get is defined, use it to retrieve the full
bitmap of supported modes.
* if not defined, fall back to the existing behavior: retrieve
the current mode via ops->mode_get and set the corresponding bit
in the bitmap.
Finally, iterate over the bitmap and add a DPLL_A_MODE_SUPPORTED netlink
attribute for every set bit, accurately reporting the device's capabilities
to userspace.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260114122726.120303-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Phase-adjust values are currently limited by a min-max range. Some
hardware requires, for certain pin types, that values be multiples of
a specific granularity, as in the zl3073x driver.
Add a `phase-adjust-gran` pin attribute and an appropriate field in
dpll_pin_properties. If set by the driver, use its value to validate
user-provided phase-adjust values.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20251029153207.178448-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The device-id-get and pin-id-get handlers were ignoring errors from
the find functions and sending empty replies instead of returning
error codes to userspace.
When dpll_device_find_from_nlattr() or dpll_pin_find_from_nlattr()
returned an error (e.g., -EINVAL for "multiple matches" or -ENODEV
for "not found"), the handlers checked `if (!IS_ERR(ptr))` and
skipped adding the device/pin handle to the message, but then still
sent the empty message as a successful reply.
This caused userspace tools to receive empty responses with id=0
instead of proper netlink errors with extack messages like
"multiple matches".
The bug is visible via strace, which shows the kernel sending TWO
netlink messages in response to a single request:
1. Empty reply (20 bytes, just header, no attributes):
recvfrom(3, [{nlmsg_len=20, nlmsg_type=dpll, nlmsg_flags=0, ...},
{cmd=0x7, version=1}], ...)
2. NLMSG_ERROR ACK with extack (because of NLM_F_ACK flag):
recvfrom(3, [{nlmsg_len=60, nlmsg_type=NLMSG_ERROR,
nlmsg_flags=NLM_F_CAPPED|NLM_F_ACK_TLVS, ...},
[{error=0, msg={...}},
[{nla_type=NLMSGERR_ATTR_MSG}, "multiple matches"]]], ...)
The C YNL library parses the first message, sees an empty response,
and creates a result object with calloc() which zero-initializes all
fields, resulting in id=0.
The Python YNL library parses both messages and displays the extack
from the second NLMSG_ERROR message.
Fix by checking `if (IS_ERR(ptr))` first and returning the error
code immediately, so that netlink properly sends only NLMSG_ERROR with
the extack message to userspace. After this fix, both C and Python
YNL tools receive only the NLMSG_ERROR and behave consistently.
This affects:
- DPLL_CMD_DEVICE_ID_GET: now properly returns error when multiple
devices match the criteria (e.g., same module-name + clock-id)
- DPLL_CMD_PIN_ID_GET: now properly returns error when multiple pins
match the criteria (e.g., same module-name)
Before fix:
$ dpll pin id-get module-name ice
0 (wrong - should be error, there are 17 pins with module-name "ice")
After fix:
$ dpll pin id-get module-name ice
Error: multiple matches
(correct - kernel reports the ambiguity via extack)
Fixes: 9d71b54b65 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251024190733.364101-1-poros@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new callback operations for a dpll device:
- phase_offset_avg_factor_get(...) - to obtain current phase offset
averaging factor from dpll device,
- phase_offset_avg_factor_set(...) - to set phase offset averaging factor
Obtain the factor value using the get callback and provide it to the user
if the device driver implement this callback. Execute the set callback upon
user requests, if the driver implement it.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
v2:
* do not require 'set' callback to retrieve current value
* always call 'set' callback regardless of current value
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250927084912.2343597-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The DPLL_CLOCK_QUALITY_LEVEL_ITU_OPT1_EPRC is not reported via netlink
due to bug in dpll_msg_add_clock_quality_level(). The usage of
DPLL_CLOCK_QUALITY_LEVEL_MAX for both DECLARE_BITMAP() and
for_each_set_bit() is not correct because these macros requires bitmap
size and not the highest valid bit in the bitmap.
Use correct bitmap size to fix this issue.
Fixes: a1afb959ad ("dpll: add clock quality level attribute and op")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20250912093331.862333-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new callback operations for a dpll device:
- phase_offset_monitor_get(..) - to obtain current state of phase offset
monitor feature from dpll device,
- phase_offset_monitor_set(..) - to allow feature configuration.
Obtain the feature state value using the get callback and provide it to
the user if the device driver implements callbacks.
Execute the set callback upon user requests.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250612152835.1703397-3-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to allow driver expose quality level of the clock it is
running, introduce a new netlink attr with enum to carry it to the
userspace. Also, introduce an op the dpll netlink code calls into the
driver to obtain the value.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20241030081157.966604-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement and document new pin attributes for providing Embedded SYNC
capabilities to the DPLL subsystem users through a netlink pin-get
do/dump messages. Allow the user to set Embedded SYNC frequency with
pin-set do netlink message.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20240822222513.255179-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Older versions of GCC really want to know the full definition
of the type involved in rcu_assign_pointer().
struct dpll_pin is defined in a local header, net/core can't
reach it. Move all the netdev <> dpll code into dpll, where
the type is known. Otherwise we'd need multiple function calls
to jump between the compilation units.
This is the same problem the commit under fixes was trying to address,
but with rcu_assign_pointer() not rcu_dereference().
Some of the exports are not needed, networking core can't
be a module, we only need exports for the helpers used by
drivers.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/35a869c8-52e8-177-1d4d-e57578b99b6@linux-m68k.org/
Fixes: 640f41ed33 ("dpll: fix build failure due to rcu_dereference_check() on unknown type")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240305013532.694866-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, I've been hitting following deadlock warning during dpll pin
dump:
[52804.637962] ======================================================
[52804.638536] WARNING: possible circular locking dependency detected
[52804.639111] 6.8.0-rc2jiri+ #1 Not tainted
[52804.639529] ------------------------------------------------------
[52804.640104] python3/2984 is trying to acquire lock:
[52804.640581] ffff88810e642678 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}, at: netlink_dump+0xb3/0x780
[52804.641417]
but task is already holding lock:
[52804.642010] ffffffff83bde4c8 (dpll_lock){+.+.}-{3:3}, at: dpll_lock_dumpit+0x13/0x20
[52804.642747]
which lock already depends on the new lock.
[52804.643551]
the existing dependency chain (in reverse order) is:
[52804.644259]
-> #1 (dpll_lock){+.+.}-{3:3}:
[52804.644836] lock_acquire+0x174/0x3e0
[52804.645271] __mutex_lock+0x119/0x1150
[52804.645723] dpll_lock_dumpit+0x13/0x20
[52804.646169] genl_start+0x266/0x320
[52804.646578] __netlink_dump_start+0x321/0x450
[52804.647056] genl_family_rcv_msg_dumpit+0x155/0x1e0
[52804.647575] genl_rcv_msg+0x1ed/0x3b0
[52804.648001] netlink_rcv_skb+0xdc/0x210
[52804.648440] genl_rcv+0x24/0x40
[52804.648831] netlink_unicast+0x2f1/0x490
[52804.649290] netlink_sendmsg+0x36d/0x660
[52804.649742] __sock_sendmsg+0x73/0xc0
[52804.650165] __sys_sendto+0x184/0x210
[52804.650597] __x64_sys_sendto+0x72/0x80
[52804.651045] do_syscall_64+0x6f/0x140
[52804.651474] entry_SYSCALL_64_after_hwframe+0x46/0x4e
[52804.652001]
-> #0 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}:
[52804.652650] check_prev_add+0x1ae/0x1280
[52804.653107] __lock_acquire+0x1ed3/0x29a0
[52804.653559] lock_acquire+0x174/0x3e0
[52804.653984] __mutex_lock+0x119/0x1150
[52804.654423] netlink_dump+0xb3/0x780
[52804.654845] __netlink_dump_start+0x389/0x450
[52804.655321] genl_family_rcv_msg_dumpit+0x155/0x1e0
[52804.655842] genl_rcv_msg+0x1ed/0x3b0
[52804.656272] netlink_rcv_skb+0xdc/0x210
[52804.656721] genl_rcv+0x24/0x40
[52804.657119] netlink_unicast+0x2f1/0x490
[52804.657570] netlink_sendmsg+0x36d/0x660
[52804.658022] __sock_sendmsg+0x73/0xc0
[52804.658450] __sys_sendto+0x184/0x210
[52804.658877] __x64_sys_sendto+0x72/0x80
[52804.659322] do_syscall_64+0x6f/0x140
[52804.659752] entry_SYSCALL_64_after_hwframe+0x46/0x4e
[52804.660281]
other info that might help us debug this:
[52804.661077] Possible unsafe locking scenario:
[52804.661671] CPU0 CPU1
[52804.662129] ---- ----
[52804.662577] lock(dpll_lock);
[52804.662924] lock(nlk_cb_mutex-GENERIC);
[52804.663538] lock(dpll_lock);
[52804.664073] lock(nlk_cb_mutex-GENERIC);
[52804.664490]
The issue as follows: __netlink_dump_start() calls control->start(cb)
with nlk->cb_mutex held. In control->start(cb) the dpll_lock is taken.
Then nlk->cb_mutex is released and taken again in netlink_dump(), while
dpll_lock still being held. That leads to ABBA deadlock when another
CPU races with the same operation.
Fix this by moving dpll_lock taking into dumpit() callback which ensures
correct lock taking order.
Fixes: 9d71b54b65 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://lore.kernel.org/r/20240207115902.371649-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass additional argunent status_error over lock_status_get()
so drivers can fill it up. In case they do, expose the value over
previously introduced attribute to user. Do it only in case the
current lock_status is either "unlocked" or "holdover".
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If parent pin was unregistered but child pin was not, the userspace
would see the "zombie" pins - the ones that were registered with
a parent pin (dpll_pin_on_pin_register(..)).
Technically those are not available - as there is no dpll device in the
system. Do not dump those pins and prevent userspace from any
interaction with them. Provide a unified function to determine if the
pin is available and use it before acting/responding for user requests.
Fixes: 9d71b54b65 ("dpll: netlink: Add DPLL framework base functions")
Reviewed-by: Jan Glaza <jan.glaza@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a kernel module is unbound but the pin resources were not entirely
freed (other kernel module instance of the same PCI device have had kept
the reference to that pin), and kernel module is again bound, the pin
properties would not be updated (the properties are only assigned when
memory for the pin is allocated), prop pointer still points to the
kernel module memory of the kernel module which was deallocated on the
unbind.
If the pin dump is invoked in this state, the result is a kernel crash.
Prevent the crash by storing persistent pin properties in dpll subsystem,
copy the content from the kernel module when pin is allocated, instead of
using memory of the kernel module.
Fixes: 9431063ad3 ("dpll: core: Add DPLL framework base functions")
Fixes: 9d71b54b65 ("dpll: netlink: Add DPLL framework base functions")
Reviewed-by: Jan Glaza <jan.glaza@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new netlink attribute to expose fractional frequency offset value
for a pin. Add an op to get the value from the driver.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://lore.kernel.org/r/20240103132838.1501801-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mode supported is currently reported to the user exactly the same, as
the current mode. That's because mode changing is not implemented.
Remove the leftover mode_supported() op and use mode_get() to fill up
the supported mode exposed to user.
One, if even, mode changing is going to be introduced, this could be
very easily taken back. In the meantime, prevent drivers form
implementing this in wrong way (as for example recent netdevsim
implementation attempt intended to do).
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
User may not pass DPLL_A_PIN_STATE attribute in the pin set operation
message. Sanitize that by checking if the attr pointer is not null
and process the passed state attribute value only in that case.
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: 9d71b54b65 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20231211083758.1082853-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We should clean the skb resource if genlmsg_put_reply failed.
Fixes: 9d71b54b65 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20231121013709.73323-1-gehao@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Align the approach of pin frequency set behavior with the approach
introduced with pin phase adjust set.
Fail the request if any of devices did not registered the callback ops.
If callback op on any pin's registered device fails, return error and
rollback the value to previous one.
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add callback ops for pin-dpll phase measurement.
Add callback for pin signal phase adjustment.
Add min and max phase adjustment values to pin proprties.
Invoke callbacks in dpll_netlink.c when filling the pin details to
provide user with phase related attribute values.
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case netdevice represents a SyncE port, the user needs to understand
the connection between netdevice and associated DPLL pin. There might me
multiple netdevices pointing to the same pin, in case of VF/SF
implementation.
Add a IFLA Netlink attribute to nest the DPLL pin handle, similar to
how it is implemented for devlink port. Add a struct dpll_pin pointer
to netdev and protect access to it by RTNL. Expose netdev_dpll_pin_set()
and netdev_dpll_pin_clear() helpers to the drivers so they can set/clear
the DPLL pin relationship to netdev.
Note that during the lifetime of struct dpll_pin the pin handle does not
change. Therefore it is save to access it lockless. It is drivers
responsibility to call netdev_dpll_pin_clear() before dpll_pin_put().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
DPLL framework is used to represent and configure DPLL devices
in systems. Each device that has DPLL and can configure inputs
and outputs can use this framework.
Implement dpll netlink framework functions for enablement of dpll
subsystem netlink family.
Co-developed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Co-developed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
