The size limits break some of the CI tests. So drop them for now. Keep
the other overflow tests from commit 5ab62dd368 ("drm: prevent integer
overflows in dumb buffer creation helpers") in place.
There is still a pre-existing overflow check for 32-bit type limits in
drm_mode_create_dumb() that will catch the really absurd size requests.
Drivers that still do not use drm_mode_size_dumb() should be updated. The
helper calculates dumb-buffer geometry with overflow checks.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 5ab62dd368 ("drm: prevent integer overflows in dumb buffer creation helpers")
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Closes: https://lore.kernel.org/dri-devel/ddf0233e50044059c85279f928661563ef6a55bf@intel.com/
Cc: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260602112842.252279-1-tzimmermann@suse.de
Fix integer overflow issues in the dumb buffer creation path:
1. drm_mode_create_dumb() does not bound width, height, or bpp
before passing them to driver callbacks. Downstream helpers
(e.g. drm_gem_dma_dumb_create_internal) perform pitch/size
alignment in u32 arithmetic that can overflow for extreme
values. Add hard limits: width and height < 8192, bpp <= 32.
No legitimate software rendering use case exceeds these.
2. drm_mode_align_dumb() uses roundup(pitch, hw_pitch_align)
without checking for overflow. If pitch is near U32_MAX,
roundup() wraps to a small value, making subsequent
check_mul_overflow() pass with a much smaller pitch than
intended. Add an overflow check after roundup.
3. drm_mode_align_dumb() uses ALIGN(size, hw_size_align) which
only works correctly for power-of-two alignment values.
Replace with roundup() which works for any alignment.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
Add drm_modes_size_dumb(), a helper to calculate the dumb-buffer
scanline pitch and allocation size. Implementations of struct
drm_driver.dumb_create can call the new helper for their size
computations.
There is currently quite a bit of code duplication among DRM's
memory managers. Each calculates scanline pitch and buffer size
from the given arguments, but the implementations are inconsistent
in how they treat alignment and format support. Later patches will
unify this code on top of drm_mode_size_dumb() as much as possible.
drm_mode_size_dumb() uses existing 4CC format helpers to interpret
the given color mode. This makes the dumb-buffer interface behave
similar the kernel's video= parameter. Current per-driver implementations
again likely have subtle differences or bugs in how they support color
modes.
The dumb-buffer UAPI is only specified for known color modes. These
values describe linear, single-plane RGB color formats or legacy index
formats. Other values should not be specified. But some user space
still does. So for unknown color modes, there are a number of known
exceptions for which drm_mode_size_dumb() calculates the pitch from
the bpp value, as before. All other values work the same but print
an error.
v6:
- document additional use cases for DUMB_CREATE2 in TODO list (Tomi)
- fix typos in documentation (Tomi)
v5:
- check for overflows with check_mul_overflow() (Tomi)
v4:
- use %u conversion specifier (Geert)
- list DRM_FORMAT_Dn in UAPI docs (Geert)
- avoid dmesg spamming with drm_warn_once() (Sima)
- add more information about bpp special case (Sima)
- clarify parameters for hardware alignment
- add a TODO item for DUMB_CREATE2
v3:
- document the UAPI semantics
- compute scanline pitch from for unknown color modes (Andy, Tomi)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250821081918.79786-3-tzimmermann@suse.de
The ioctls MODE_CREATE_DUMB and MODE_MAP_DUMB return results into a
memory buffer supplied by user space. On errors, it is possible that
intermediate values are being returned. The exact semantics depends
on the DRM driver's implementation of these ioctls. Although this is
most-likely not a security problem in practice, avoid any uncertainty
by clearing the memory to 0 on errors.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250821081918.79786-2-tzimmermann@suse.de
The drm_gem_dumb_destroy() isn't used in drivers, don't export it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The use of the drmP.h header file is deprecated.
Remove use from all files in drm/*
so people do not look there and follow a bad example.
Build tested allyesconfig,allmodconfig on x86, arm etc.
Including alpha that is as always more challenging than
the rest.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190526173535.32701-8-sam@ravnborg.org
Make ioctl wrappers for functions that will be used by the in-kernel API.
The following functions are touched:
- drm_mode_create_dumb_ioctl()
- drm_mode_destroy_dumb_ioctl()
- drm_mode_addfb()
- drm_mode_rmfb()
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618141739.48151-4-noralf@tronnes.org
There is a comment here which says that DIV_ROUND_UP() and that's where
the problem comes from. Say you pick:
args->bpp = UINT_MAX - 7;
args->width = 4;
args->height = 1;
The integer overflow in DIV_ROUND_UP() means "cpp" is UINT_MAX / 8 and
because of how we picked args->width that means cpp < UINT_MAX / 4.
I've fixed it by preventing the integer overflow in DIV_ROUND_UP(). I
removed the check for !cpp because it's not possible after this change.
I also changed all the 0xffffffffU references to U32_MAX.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516140026.GA19340@mwanda
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
v2: Review from Eric.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-4-daniel.vetter@ffwll.ch
sed -e 's/\( \* .*\)struct &\([_a-z]*\)/\1\&struct \2/' -i
Originally I wasnt a friend of this style because I thought a
line-break between the "&struct" and "foo" part would break it. But a
quick test shows that " * &struct \n * foo\n" works pefectly well with
current kernel-doc. So time to mass-apply these changes!
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-6-git-send-email-daniel.vetter@ffwll.ch