Currently Nova code uses `&'a Bar0` a lot. This is `&'a Mmio`, where `Mmio`
represents an owned MMIO region; this type only exists as a target for
`Deref` so `Bar` and `IoMem` can share code and should be avoided to be
named directly. The upcoming I/O projection series would make `Io` trait
much simpler to implement, and thus the owned MMIO type would be removed
in favour of direct `Io` implementation on `Bar` and `IoMem`.
Add lifetime parameter to `Bar0<'a>` and change it to be alias of `&'a
pci::Bar<'a, ..>`. This also prepares Nova core so that when I/O projection
series land, this could be changed to using a MMIO view type directly which
avoids double indirection.
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260602170416.2268531-1-gary@kernel.org
[ Rebase onto latest drm-rust-next (Blackwell enablement). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When probing the driver, the FWSEC-FRTS firmware creates a WPR2 secure
memory region to store the GSP firmware, and the Booter Loader loads and
starts that firmware into the GSP, making it run in RISC-V mode.
These operations need to be reverted upon unloading, particularly the
WPR2 secure region creation, as its presence prevents the driver from
subsequently probing.
Thus, prepare the Booter Unloader and FWSEC-SB firmware images when
booting the GSP, so they can be executed at unbind time to put the GPU
into a state where it can be probed again.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Co-developed-by: Eliot Courtney <ecourtney@nvidia.com>
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260529-nova-unload-v7-3-678f39209e00@nvidia.com
[acourbot: `Result<()>` -> `Result`]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
On Turing and GA100, a new firmware image called the Generic Bootloader
(gen_bootloader) must be used to load FWSEC into Falcon memory. The
driver loads the generic bootloader into Falcon IMEM, passes a
descriptor that points to FWSEC using DMEM, and then boots the generic
bootloader. The bootloader will then load FWSEC into IMEM and boot it.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260306-turing_prep-v11-12-8f0042c5d026@nvidia.com
These methods are relevant no matter the loading method used, thus move
them to the common `FalconFirmware` trait.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260306-turing_prep-v11-5-8f0042c5d026@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The current `FalconLoadParams` and `FalconLoadTarget` types are fit for
DMA loading, but not so much for PIO loading which will require its own
types. Start by renaming them to something that indicates that they are
indeed DMA-related.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260306-turing_prep-v11-3-8f0042c5d026@nvidia.com
[acourbot@nvidia.com: fixup order of import items.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
When DMA was the only loading option for falcon firmwares, we decided to
store them in DMA objects as soon as they were loaded from disk and
patch them in-place to avoid having to do an extra copy.
This decision complicates the PIO loading patch considerably, and
actually does not even stand on its own when put into perspective with
the fact that it requires 8 unsafe statements in the code that wouldn't
exist if we stored the firmware into a `KVVec` and copied it into a DMA
object at the last minute.
The cost of the copy is, as can be expected, imperceptible at runtime.
Thus, switch to a lazy DMA object creation model and simplify our code
a bit. This will also have the nice side-effect of being more fit for
PIO loading.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260306-turing_prep-v11-1-8f0042c5d026@nvidia.com
[acourbot@nvidia.com: add TODO item to switch back to a coherent
allocation when it becomes convenient to do so.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Use checked_add() and checked_mul() when computing offsets from
firmware-provided values in new_fwsec().
Without checked arithmetic, corrupt firmware could cause integer
overflow. The danger is not just wrapping to a huge value, but
potentially wrapping to a small plausible offset that passes validation
yet accesses entirely wrong data, causing silent corruption or security
issues.
Reviewed-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260126202305.2526618-2-joelagnelf@nvidia.com
[acourbot@nvidia.com: rewrap commit message to make checkpatch happy.]
[acourbot@nvidia.com: add missing empty lines after new code blocks.]
[acourbot@nvidia.com: move SAFETY comments to the unsafe statement they
describe.]
[acourbot@nvidia.com: remove obvious computation comments and use
`CALC:` for the remaining ones.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors.
- Use pin_init::zeroed() for fops initialization.
- Annotate DRM helpers with __rust_helper.
- Improve safety documentation for gem::Object::new().
- Update AlwaysRefCounted imports.
- mm: Prevent integer overflow in page_align().
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switched to use virtual planes by default
- Fixed DSI CMD panels on DPU 3.x
- Rewrote format handling to remove intermediate representation
- Fixed watchdog on DPU 8.x+
- Fixed TE / Vsync source setting on DPU 8.x+
- Added 3D_Mux on SC7280
- Kaanapali platform support
- Fixed UBWC register programming
- Made RM reserve DSPP-enabled mixers for CRTCs with LMs.
- Gamma correction support
- DP:
- Enabled support for eDP 1.4+ link rate tables
- Fixed MDSS1 DP indices on SA8775P, making them to work
- Fixed msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Documented QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switched to divider_determine_rate()
- MDP5:
- Dropped support for MSM8998, SDM660 and SDM630 (switched over
to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation.
- Get rid of the Result<impl PinInit<T, E>> anti-pattern.
- Relocate initializer-specific code into the appropriate initializer.
- Use CStr::from_bytes_until_nul() to remove custom helpers.
- Improve handling of unexpected firmware values.
- Clean up redundant debug prints.
- Replace c_str!() with native Rust C-string literals.
- Update nova-core task list.
nova:
- Align GEM object size to system page size.
tyr:
- Use generated uAPI bindings for GpuInfo.
- Replace manual sleeps with read_poll_timeout().
- Replace c_str!() with native Rust C-string literals.
- Suppress warnings for unread fields.
- Fix incorrect register name in print statement.
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
-----BEGIN PGP SIGNATURE-----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=RFJ2
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
These imports are already in scope by importing `kernel::prelude::*` and
does not need to be imported separately.
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260123172007.136873-2-gary@garyguo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The FRTS firmware in Turing and GA100 VBIOS has an older header
format (v2 instead of v3). To support both v2 and v3 at runtime,
add the FalconUCodeDescV2 struct, and update code that references
the FalconUCodeDescV3 directly with a FalconUCodeDesc enum that
encapsulates both.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-11-ttabi@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Some GPUs do not support using DMA to transfer code/data from system
memory to Falcon memory, and instead must use programmed I/O (PIO).
Add a function to the Falcon HAL to indicate whether a given GPU's
Falcons support DMA for this purpose.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-10-ttabi@nvidia.com
[acourbot@nvidia.com: add short code to call into the HAL.]
[acourbot@nvidia.com: make `dma_load` private as per feedback.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The GSP booter firmware in Turing and GA100 includes a third memory
section called ImemNonSecure, which is non-secure IMEM. This section
must be loaded separately from DMEM and secure IMEM, but only if it
actually exists.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-3-ttabi@nvidia.com
[acourbot@nvidia.com: add `debug_assert`.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Rename FalconMem::Imem to ImemSecure to indicate that it references
Secure Instruction Memory. This change has no functional impact.
On Falcon cores, pages in instruction memory can be tagged as Secure
or Non-Secure. For GA102 and later, only Secure is used, which is why
FalconMem::Imem seems appropriate. However, Turing firmware images
can also contain non-secure sections, and so FalconMem needs to support
that. By renaming Imem to ImemSec now, future patches for Turing support
will be simpler.
Nouveau uses the term "IMEM" to refer both to the Instruction Memory
block on Falcon cores as well as to the images of secure firmware
uploaded to part of IMEM. OpenRM uses the terms "ImemSec" and "ImemNs"
instead, and uses "IMEM" just to refer to the physical memory device.
Renaming these terms allows us to align with OpenRM, avoid confusion
between IMEM and ImemSec, and makes future patches simpler.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-2-ttabi@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Use the newly-introduced `num` module to replace the use of `as`
wherever it is safe to do. This ensures that a given conversion cannot
lose data if its source or destination type ever changes.
Acked-by: Danilo Krummrich <dakr@kernel.org>
[acourbot@nvidia.com: fix merge conflicts after rebase.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251029-nova-as-v3-5-6a30c7333ad9@nvidia.com>
Some comments that already existed didn't start with a capital
letter, this patch fixes that.
Signed-off-by: Daniel del Castillo <delcastillodelarosadaniel@gmail.com>
[acourbot@nvidia.com: set prefix to "gpu: nova-core:".]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251104193756.57726-2-delcastillodelarosadaniel@gmail.com>
This patch solves one of the existing mentions of COHA, a task
in the Nova task list about improving the `CoherentAllocation` API.
It uses the new `from_bytes` method from the `FromBytes` trait as
well as the `as_slice` and `as_slice_mut` methods from
`CoherentAllocation`.
Signed-off-by: Daniel del Castillo <delcastillodelarosadaniel@gmail.com>
[acourbot@nvidia.com: set prefix to "gpu: nova-core:".]
[acourbot@nvidia.com: fix merge conflict after imports refactor.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251104193756.57726-1-delcastillodelarosadaniel@gmail.com>
As per [1], we need one "use" item per line, in order to reduce merge
conflicts. Furthermore, we need a trailing ", //" in order to tell
rustfmt(1) to leave it alone.
This does that for the entire nova-core driver.
[1] https://docs.kernel.org/rust/coding-guidelines.html#imports
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
[acourbot@nvidia.com: remove imports already in prelude as pointed out
by Danilo.]
[acourbot@nvidia.com: remove a few unneeded trailing `//`.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251107021006.434109-1-jhubbard@nvidia.com>
There are a few situations in the driver where we convert a `usize` into
a `u32` using `as`. Even though most of these are obviously correct, use
`try_from` and let the compiler optimize wherever it is safe to do so.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251029-nova-as-v3-3-6a30c7333ad9@nvidia.com>
The `as` operator is best avoided as it silently drops bits if the
destination type is smaller that the source.
For data types where this is clearly not the case, use `from` to
unambiguously signal that these conversions are lossless.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251029-nova-as-v3-1-6a30c7333ad9@nvidia.com>
Now that the vbios code uses a non-bound `Device` instance, store an
`ARef` to it at construction time so we can use it for logging without
having to carry an extra argument on every method for that sole purpose.
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250808-vbios_device-v1-2-834bbbab6471@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Falcon DMA transfers are done in 256 bytes increments, and the method
responsible for initiating the transfer checked that the required length
was indeed a multiple of 256. While correct, this also requires callers
to specifically account for this limitation of DMA transfers, and we had
for instance the fwsec code performing a seemingly arbitrary (and
potentially overflowing) upwards alignment of the DMEM load size to
match this requirement.
Let's move that alignment into the loading code itself instead: since it
is working in terms of number of transfers, we can turn this upwards
alignment into a non-overflowing operation, and check that the requested
transfer remains into the limits of the DMA object. This also allows us
to remove a DMA-specific constant in the fwsec code.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250821-falcondma_256b-v2-1-83e8647a24b5@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
A few new dependencies are required to remove some of the TODO items:
- A way to safely convert from byte slices to types implementing
`FromBytes`,
- A way to obtain slices and write into a `CoherentAllocation`,
- Several improvements to the `register!()` macro,
- Alignment operations to powers of two, and an equivalent to the C
`fls`,
- Support for `xa_alloc` in the XAlloc bindings.
Some items have also become obsolete:
- The auxiliary bus abstractions have been implemented and are in use,
- The ELF utilities are not considered for being part of the core kernel
bindings anymore.
- VBIOS, falcon and GPU timer have been completed.
We now have quite a few TODO entries in the code, so annotate them with
a 4 letter code representing the corresponding task in `todo.rst`. This
allows to easily find which part of the code corresponds to a given
entry (and conversely).
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-24-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
With all the required pieces in place, load FWSEC-FRTS onto the GSP
falcon, run it, and check that it successfully carved out the WPR2
region out of framebuffer memory.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-23-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The FWSEC firmware needs to be extracted from the VBIOS and patched with
the desired command, as well as the right signature. Do this so we are
ready to load and run this firmware into the GSP falcon and create the
FRTS region.
[joelagnelf@nvidia.com: give better names to FalconAppifHdrV1's fields]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-22-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
