Replace sprintf() calls with sysfs_emit() to follow current kernel
coding standards.
sysfs_emit() is the preferred method for formatting sysfs output as it
provides better bounds checking and is more secure.
Signed-off-by: Madhur Kumar <madhurkumar004@gmail.com>
Link: https://patch.msgid.link/20251214083659.2412218-1-madhurkumar004@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo adjusted commit message while pushing it]
There is no reason to accept an invalid minimum/maximum DSC source input
BPP value (i.e a minimum DSC input BPP value above the maximum pipe BPP
or a maximum DSC input BPP value below the minimum pipe BPP value), fail
the state computation in these cases.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-17-imre.deak@intel.com
There is no reason to accept an invalid maximum sink compressed BPP
value (i.e. 0), fail the state computation in this case.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-16-imre.deak@intel.com
There is no reason to accept a minimum/maximum link BPP value above the
maximum throughput BPP value, fail the state computation in this case.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-15-imre.deak@intel.com
Make sure that state computation fails if the minimum/maximum link BPP
values got invalid as a result of limiting both of these values
separately to the corresponding source/sink capability limits.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-14-imre.deak@intel.com
The pipe joiner maximum compressed BPP must be limited based on the pipe
joiner memory size and BW, do that for all DP outputs by adjusting the
max compressed BPP value already in
intel_dp_compute_config_link_bpp_limits() (which is used by all output
types).
This way the BPP doesn't need to be adjusted in
dsc_compute_compressed_bpp() (called for DP-SST after the above limits
were computed already), so remove the adjustment from there.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-13-imre.deak@intel.com
A DSC compressed stream requires FEC (except for eDP), which has a BW
overhead on non-UHBR links that must be accounted for explicitly. Do
that during computing the required BW.
Note that the overhead doesn't need to be accounted for on UHBR links
where FEC is always enabled and so the corresponding overhead is part of
the channel coding efficiency instead (i.e. the overhead is part of the
available vs. the required BW).
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-12-imre.deak@intel.com
On MST links the symbol alignment and SSC have a BW overhead, which
should be accounted for when calculating the required stream BW, do so
during mode validation for an uncompressed stream.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-11-imre.deak@intel.com
Use intel_dp_effective_data_rate() to calculate the required link BW for
compressed streams on non-UHBR DP-SST links. This ensures that the BW is
calculated the same way for all DP output types and DSC/non-DSC modes,
during mode validation as well as during state computation.
This approach also allows for accounting with BW overhead due to DSC,
FEC being enabled on a link. Acounting for these will be added by
follow-up changes.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-10-imre.deak@intel.com
Use intel_dp_effective_data_rate() to calculate the required link BW for
eDP, DP-SST and MST links. This ensures that the BW is calculated the
same way for all DP output types, during mode validation as well as
during state computation. This approach also allows for accounting with
BW overheads due to the SSC, DSC, FEC being enabled on a link, as well
as due to the MST symbol alignment on the link. Accounting for these
overheads will be added by follow-up changes.
This way also computes the stream BW on a UHBR link correctly, using the
corresponding symbol size to effective data size ratio (i.e. ~97% link
BW utilization for UHBR vs. only ~80% for non-UHBR).
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-9-imre.deak@intel.com
is_bw_sufficient_for_dsc_config() should return true if the required BW
equals the available BW, make it so.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-8-imre.deak@intel.com
Factor out intel_dp_link_bw_overhead(), used later for BW calculation
during DP SST mode validation and state computation.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-7-imre.deak@intel.com
The encoder state computation should use the
drm_display_mode::crtc_clock member, instead of the clock member, the
former one possibly having a necessary adjustment wrt. to the latter
due to driver specific constraints. In practice the two values should
not differ at spots changed in this patch, since only MSO and 3D modes
would make them different, neither MSO or 3D relevant here, but still
use the expected crtc_clock version for consistency.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-6-imre.deak@intel.com
Convert intel_dp_output_bpp() and intel_dp_mode_min_output_bpp() to
return an x16 fixed point bpp value, as this value will be always the
link BPP (either compressed or uncompressed) tracked in the same x16
fixed point format.
While at it rename
intel_dp_output_bpp() to intel_dp_output_format_link_bpp_x16() and
intel_dp_mode_min_output_bpp() to intel_dp_mode_min_link_bpp_x16() to
better reflect that these functions return an x16 link BPP value
specific to a particular output format or mode.
Also rename intel_dp_output_bpp()'s bpp parameter to pipe_bpp, to
clarify which kind of (pipe vs. link) BPP the parameter is.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-5-imre.deak@intel.com
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count, fix
intel_dp_dsc_get_slice_count() accordingly.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-4-imre.deak@intel.com
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count. Add the helper
functions required for this.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-3-imre.deak@intel.com
Commit 33729a5fc0 ("iommu/io-pgtable-arm: Remove split on unmap
behavior") did away with the treatment of partial unmaps of huge IOPTEs.
In the case of Panthor, that means an attempt to run a VM_BIND unmap
operation on a memory region whose start address and size aren't 2MiB
aligned, in the event it intersects with a huge page, would lead to ARM
IOMMU management code to fail and a warning being raised.
Presently, and for lack of a better alternative, it's best to have
Panthor handle partial unmaps at the driver level, by unmapping entire
huge pages and remapping the difference between them and the requested
unmap region.
This could change in the future when the VM_BIND uAPI is expanded to
enforce huge page alignment and map/unmap operational constraints that
render this code unnecessary.
When a partial unmap for a huge PTE is attempted, we also need to expand
the locked region to encompass whole huge pages.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251217213252.677020-2-adrian.larumbe@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Ensure all related groups are evicted and suspended before VM
destruction takes place.
This fixes an issue where panthor_vm_destroy() destroys and unmaps the
heap context while there are still on slot groups using this.
The FW will do a write out to the heap context when a CSG (group) is
suspended, so a premature unmap of the heap context will cause a
GPU page fault.
This page fault is quite harmless, and do not affect the continued
operation of the GPU.
Fixes: 647810ec24 ("drm/panthor: Add the MMU/VM logical block")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251219093546.1227697-1-ketil.johnsen@arm.com
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Backmerging to bring in 6.19-rc1. An important upstream bugfix and
to help unblock PTL CI.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
drm_colorop.h doesn't need the intel_display_types.h include for
anything. Don't include headers from headers if it can be avoided.
Fixes: 3e9b06559a ("drm/i915: Add intel_color_op")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251218141807.409751-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
WCL supports a maximum of HBR3 8.1 Gbps for both eDP/DP.
Limit the max source rate to HBR3 for WCL.
v2: Move the check inside mtl_max_source_rate(). (Suraj)
Bspec:74286
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20251122053651.759389-1-ankit.k.nautiyal@intel.com
Sphinx reports htmldocs warnings:
Documentation/gpu/xe/xe_firmware:31: ./drivers/gpu/drm/xe/xe_guc_pc.c:76: ERROR: A level 2 section cannot be used here.
Documentation/gpu/xe/xe_firmware:31: ./drivers/gpu/drm/xe/xe_guc_pc.c:87: ERROR: A level 2 section cannot be used here.
The xe_guc_pc.c documentation is included inside xe_firmware.rst.
The headers in the C file currently use '=' underlines, which conflict with
the parent document's section levels.
Fix this by demoting "Frequency management" and "Render-C States" headers
from '=' to '-' to correctly nest them as subsections.
Build environment: Python 3.13.7 Sphinx 8.2.3 docutils 0.22.3
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Link: https://patch.msgid.link/20251209094836.18589-1-swarajgaikwad1925@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Mark CRI as one that have the CSC NVM device.
Update the writable override flow to take the information from
the scratch register for CRI.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251216111034.3093507-1-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
msleep is not very accurate in terms of how long it actually sleeps,
whereas usleep_range is precise. Replace the timeslice sleep for
long-running workloads with the more accurate usleep_range to avoid
jitter if the sleep period is less than 20ms.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-3-matthew.brost@intel.com
(cherry picked from commit ca415c4d4c)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
When imported dma-bufs are destroyed, TTM is not fully
individualizing the dma-resv, but it *is* copying the fences that
need to be waited for before declaring idle. So in the case where
the bo->resv != bo->_resv we can still drop the preempt-fences, but
make sure we do that on bo->_resv which contains the fence-pointer
copy.
In the case where the copying fails, bo->_resv will typically not
contain any fences pointers at all, so there will be nothing to
drop. In that case, TTM would have ensured all fences that would
have been copied are signaled, including any remaining preempt
fences.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: fa0af721bd ("drm/ttm: test private resv obj on release/destroy")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251217093441.5073-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 425fe550fb)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The xe_sriov_vfio_migration_supported() function is type bool so
returning -EPERM means returning true. Return false instead.
Fixes: bd45d46ffc ("drm/xe/pf: Export helpers for VFIO")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/aTLEZ4g-FD-iMQ2V@stanley.mountain
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 0a2404c8f6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reports can be written out to the OA buffer using ways other than periodic
sampling. These include mmio trigger and context switches. To support these
use cases, when periodic sampling is not enabled,
OAG_OAGLBCTXCTRL_COUNTER_RESUME must be set.
Fixes: 1db9a9dc90 ("drm/xe/oa: OA stream initialization (OAG)")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251205212613.826224-4-ashutosh.dixit@intel.com
(cherry picked from commit 88d98e74ad)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
A 10ms timeslice for long-running workloads is far too long and causes
significant jitter in benchmarks when the system is shared. Adjust the
value to 5ms for preempt-fencing VMs, as the resume step there is quite
costly as memory is moved around, and set it to zero for pagefault VMs,
since switching back to pagefault mode after dma-fence mode is
relatively fast.
Also change min_run_period_ms to 'unsiged int' type rather than 's64' as
only positive values make sense.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-2-matthew.brost@intel.com
(cherry picked from commit 33a5abd9a6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The OA open parameters did not validate num_syncs, allowing
userspace to pass arbitrarily large values, potentially
leading to excessive allocations.
Add check to ensure that num_syncs does not exceed DRM_XE_MAX_SYNCS,
returning -EINVAL when the limit is violated.
v2: use XE_IOCTL_DBG() and drop duplicated check. (Ashutosh)
Fixes: c8507a25ce ("drm/xe/oa/uapi: Define and parse OA sync properties")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251205234715.2476561-6-shuicheng.lin@intel.com
(cherry picked from commit e057b2d2b8)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The exec and vm_bind ioctl allow userspace to specify an arbitrary
num_syncs value. Without bounds checking, a very large num_syncs
can force an excessively large allocation, leading to kernel warnings
from the page allocator as below.
Introduce DRM_XE_MAX_SYNCS (set to 1024) and reject any request
exceeding this limit.
"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1217 at mm/page_alloc.c:5124 __alloc_frozen_pages_noprof+0x2f8/0x2180 mm/page_alloc.c:5124
...
Call Trace:
<TASK>
alloc_pages_mpol+0xe4/0x330 mm/mempolicy.c:2416
___kmalloc_large_node+0xd8/0x110 mm/slub.c:4317
__kmalloc_large_node_noprof+0x18/0xe0 mm/slub.c:4348
__do_kmalloc_node mm/slub.c:4364 [inline]
__kmalloc_noprof+0x3d4/0x4b0 mm/slub.c:4388
kmalloc_noprof include/linux/slab.h:909 [inline]
kmalloc_array_noprof include/linux/slab.h:948 [inline]
xe_exec_ioctl+0xa47/0x1e70 drivers/gpu/drm/xe/xe_exec.c:158
drm_ioctl_kernel+0x1f1/0x3e0 drivers/gpu/drm/drm_ioctl.c:797
drm_ioctl+0x5e7/0xc50 drivers/gpu/drm/drm_ioctl.c:894
xe_drm_ioctl+0x10b/0x170 drivers/gpu/drm/xe/xe_device.c:224
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl fs/ioctl.c:584 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xbb/0x380 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
"
v2: Add "Reported-by" and Cc stable kernels.
v3: Change XE_MAX_SYNCS from 64 to 1024. (Matt & Ashutosh)
v4: s/XE_MAX_SYNCS/DRM_XE_MAX_SYNCS/ (Matt)
v5: Do the check at the top of the exec func. (Matt)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reported-by: Koen Koning <koen.koning@intel.com>
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6450
Cc: <stable@vger.kernel.org> # v6.12+
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Ivan Briano <ivan.briano@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251205234715.2476561-5-shuicheng.lin@intel.com
(cherry picked from commit b07bac9bd7)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
When imported dma-bufs are destroyed, TTM is not fully
individualizing the dma-resv, but it *is* copying the fences that
need to be waited for before declaring idle. So in the case where
the bo->resv != bo->_resv we can still drop the preempt-fences, but
make sure we do that on bo->_resv which contains the fence-pointer
copy.
In the case where the copying fails, bo->_resv will typically not
contain any fences pointers at all, so there will be nothing to
drop. In that case, TTM would have ensured all fences that would
have been copied are signaled, including any remaining preempt
fences.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: fa0af721bd ("drm/ttm: test private resv obj on release/destroy")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251217093441.5073-1-thomas.hellstrom@linux.intel.com
These objects are meant to be used by the GPU firmware or by the PM unit
within the GPU, in which case they may contain physical addresses.
This adds a layer of protection against exposing potentially exploitable
information outside of the driver.
Fixes: ff5f643de0 ("drm/imagination: Add GEM and VM related code")
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251208-no-export-pm-fw-obj-v1-1-83ab12c61693@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Call drm_dev_exit() before returning -EINVAL.
Fixes: cd2c9c3015 ("drm/panthor: Add flag to map GEM object Write-Back Cacheable")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/aUOxxvXXtHHfFCcg@stanley.mountain
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Switch error injection testing from i915_inject_probe_failure
to ALLOW_ERROR_INJECTION. Here taken out calls to
i915_inject_probe_failure and changed to use
ALLOW_ERROR_INJECTION for the same functions.
Below functions are dropped from testing since I
couldn't hit those at module bind time, testing
these would just fail the tests. To include these
in test would need to find way to cause resetting in i915
which would trigger these:
intel_gvt_init
intel_wopcm_init
intel_uc_fw_upload
intel_gt_init with expected -EIO (-EINVAL is tested)
lrc_init_wa_ctx
intel_huc_auth
guc_check_version_range
intel_uc_fw_fetch
uc_fw_xfer
__intel_uc_reset_hw
guc_enable_communication
uc_init_wopcm
..and all stages of __force_fw_fetch_failures
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20251216080754.221974-2-juhapekka.heikkila@gmail.com
Update call sites to import `ARef` from `sync::aref`
instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20251123092438.182251-3-shankari.ak0208@gmail.com
[aliceryhl: keep trailing // at last import]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
De-referencing param.oa_unit, when an OA unit id is not provided during
stream open, results in NPD below.
Oops: general protection fault, probably for non-canonical address...
KASAN: null-ptr-deref in range...
RIP: 0010:xe_oa_stream_open_ioctl+0x169/0x38a0
xe_observation_ioctl+0x19f/0x270
drm_ioctl_kernel+0x1f4/0x410
Fix this by moving default oa unit assignment before the dereference.
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6840
Fixes: c7e269aa56 ("drm/xe/oa: Allow exec_queue's to be specified only for OAG OA unit")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patch.msgid.link/20251212061850.1565459-2-ashutosh.dixit@intel.com
Since it is illegal to register a MLRC context when scheduler groups are
enabled, the GuC consider the VF doing so as an adverse event. Like for
other adverse event, there is a threshold for how many times the event
can happen before the GuC throws an error, which we need to add support
for.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251216214902.1429-5-michal.wajdeczko@intel.com
We want to extend our macro-based KLV list definitions with new
information about the version from which given KLV is supported.
Prepare our code generators to emit dedicated version check if
a KLV was defined with the version information.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251216214902.1429-4-michal.wajdeczko@intel.com
