Fedora/CentOS/RHEL CI is reporting intermittent failures while running
the KUnit tests present in drm_hdmi_state_helper_test.c [1].
While the specific test causing the failure change between runs, all of
them are caused by drm_kunit_helper_enable_crtc_connector() returning
-EDEADLK. The error trace always follow this structure:
# <test name>: ASSERTION FAILED at
# drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c:<line>
Expected ret == 0, but
ret == -35 (0xffffffffffffffdd)
As documented, if the drm_kunit_helper_enable_crtc_connector() function
returns -EDEADLK (-35), the entire atomic sequence must be restarted.
Handle this error code for all function calls.
Closes: https://datawarehouse.cki-project.org/issue/4039 [1]
Fixes: 6a5c0ad7e0 ("drm/tests: hdmi_state_helpers: Switch to new helper")
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patch.msgid.link/20251104102258.10026-1-jose.exposito89@gmail.com
Add support to keep the group active after the primary queue is
destroyed. Instead of killing the primary queue during exec_queue
destroy ioctl, kill it when all the secondary queues of the group
are killed.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-34-niranjana.vishwanathapura@intel.com
Upon a job timeout, teardown the multi-queue group by
triggering TDR on all queues of the multi-queue group
and by skipping timeout checks in them.
v5: Ban the group while triggering TDR for the guc
reported errors
Add FIXME in TDR to take multi-queue group off HW
(Matt Brost)
v6: Trigger cleanup of group only for multi-queue case
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-32-niranjana.vishwanathapura@intel.com
To properly support soft light restore between batches
being arbitrated at the CFEG, PIPE_CONTROL instructions
have a new bit in the first DW, QUEUE_DRAIN_MODE. When
set, this indicates to the CFEG that it should only
drain the current queue.
Additionally we no longer want to set the CS_STALL bit
for these multi queue queues as this causes the entire
pipeline to stall waiting for completion of the prior
batch, preventing this soft light restore from occurring
between queues in a queue group.
v4: Assert !multi_queue where applicable (Matt Roper)
Bspec: 56551
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-29-niranjana.vishwanathapura@intel.com
As all queues of a multi queue group use the primary queue of the group
to interface with GuC. Hence there is a dependency between the queues of
the group. So, when primary queue of a multi queue group is cleaned up,
also trigger a cleanup of the secondary queues also. During cleanup, stop
and re-start submission for all queues of a multi queue group to avoid
any submission happening in parallel when a queue is being cleaned up.
v2: Initialize group->list_lock, add fs_reclaim dependency, remove
unwanted secondary queues cleanup (Matt Brost)
v3: Properly handle cleanup of multi-queue group (Matt Brost)
v4: Fix IS_ENABLED(CONFIG_LOCKDEP) check (Matt Brost)
Revert stopping/restarting of submissions on queues of the
group in TDR as it is not needed.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-28-niranjana.vishwanathapura@intel.com
Dump multi queue specific information in the guc exec queue
dump.
v2: Move multi queue related fields inside the multi_queue
sub-structure (Matt Brost)
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-27-niranjana.vishwanathapura@intel.com
Support dynamic priority change for multi queue group queues via
exec queue set_property ioctl. Issue CGP_SYNC command to GuC through
the drm scheduler message interface for priority to take effect.
v2: Move is_multi_queue check to exec_queue layer and assert
is_multi_queue being set in guc submission layer (Matt Brost)
v3: Assert CGP_SYNC message length is valid (Matt Brost)
Signed-off-by: Pallavi Mishra <pallavi.mishra@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-26-niranjana.vishwanathapura@intel.com
This patch adds support for exec_queue set_property ioctl.
It is derived from the original work which is part of
https://patchwork.freedesktop.org/series/112188/
Currently only DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE_PRIORITY
property can be dynamically set.
v2: Check for and update kernel-doc which property this ioctl
supports (Matt Brost)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Pallavi Mishra <pallavi.mishra@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-25-niranjana.vishwanathapura@intel.com
Only MULTI_QUEUE_PRIORITY property is valid for secondary queues of a
multi queue group. MULTI_QUEUE_PRIORITY only applies to multi queue group
queues. Detect invalid user queue property setting and return error.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-24-niranjana.vishwanathapura@intel.com
Add support for queues of a multi queue group to set
their priority within the queue group by adding property
DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE_PRIORITY.
This is the only other property supported by secondary
queues of a multi queue group, other than
DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE.
v2: Add kernel doc for enum xe_multi_queue_priority,
Add assert for priority values, fix includes and
declarations (Matt Brost)
v3: update uapi kernel-doc (Matt Brost)
v4: uapi change due to rebase
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-23-niranjana.vishwanathapura@intel.com
Implement GuC commands and response along with the Context
Group Page (CGP) interface for multi queue support.
Ensure that only primary queue (q0) of a multi queue group
communicate with GuC. The secondary queues of the group only
need to maintain LRCA and interface with drm scheduler.
Use primary queue's submit_wq for all secondary queues of a multi
queue group. This serialization avoids any locking around CGP
synchronization with GuC.
v2: Fix G2H_LEN_DW_MULTI_QUEUE_CONTEXT value, add more comments
(Matt Brost)
v3: Minor code refactro, use xe_gt_assert
v4: Use xe_guc_ct_wake_waiters(), remove vf recovery support
(Matt Brost)
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-22-niranjana.vishwanathapura@intel.com
Multi Queue is a new mode of execution supported by the compute and
blitter copy command streamers (CCS and BCS, respectively). It is an
enhancement of the existing hardware architecture and leverages the
same submission model. It enables support for efficient, parallel
execution of multiple queues within a single context. All the queues
of a group must use the same address space (VM).
The new DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE execution queue
property supports creating a multi queue group and adding queues to
a queue group. All queues of a multi queue group share the same
context.
A exec queue create ioctl call with above property specified with value
DRM_XE_SUPER_GROUP_CREATE will create a new multi queue group with the
queue being created as the primary queue (aka q0) of the group. To add
secondary queues to the group, they need to be created with the above
property with id of the primary queue as the value. The properties of
the primary queue (like priority, timeslice) applies to the whole group.
So, these properties can't be set for secondary queues of a group.
Once destroyed, the secondary queues of a multi queue group can't be
replaced. However, they can be dynamically added to the group up to a
total of 64 queues per group. Once the primary queue is destroyed,
secondary queues can't be added to the queue group.
v2: Remove group->lock, fix xe_exec_queue_group_add()/delete()
function semantics, add additional comments, remove unused
group->list_lock, add XE_BO_FLAG_GGTT_INVALIDATE for cgp bo,
Assert LRC is valid, update uapi kernel doc.
(Matt Brost)
v3: Use XE_BO_FLAG_PINNED_LATE_RESTORE/USER_VRAM/GGTT_INVALIDATE
flags for cgp bo (Matt)
v4: Ensure queue is not a vm_bind queue
uapi change due to rebase
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-21-niranjana.vishwanathapura@intel.com
Add multi_queue_enable_mask field to the gt information structure
which is bitmask of all engine classes with multi queue support
enabled.
v2: Rename multi_queue_enable_mask to multi_queue_engine_class_mask
(Matt Brost)
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-20-niranjana.vishwanathapura@intel.com
The drm_property_create_enum() function returns NULL on error, it never
returns error pointers. Fix the error checking to match.
Fixes: 2afc3184f3 ("drm/plane: Add COLOR PIPELINE property")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/aTK9ZR0sMgqSACow@stanley.mountain
Let drivers deal with the vblank wait failures if they so desire. If the
current warning backtrace gets toned down to a simple warning message,
the drivers may wish to add the backtrace themselves.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/7f2de4dd170771991756073f037c7ca043c3e746.1765290097.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
During VF_RESTORE or VF_RESUME, the GuC sends a migration interrupt and
clears the RESFIX_START marker. If migration or resume occurs before the
VF issues its own RESFIX_START, VF KMD may receive two back-to-back
migration interrupts. VF then sends RESFIX_START to indicate the beginning
of fixups and RESFIX_DONE to mark completion. However, the second
RESFIX_START fails because the GuC is already in the RUNNING state.
Clear the recovery_queued flag after sending a RESFIX_START message to
ignore duplicated IRQs seen before we start actual recovery.
This ensures the state is reset only after the fixup process begins,
avoiding redundant work item queuing.
Fixes: b5fbb94341 ("drm/xe/vf: Introduce RESFIX start marker support")
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251210052546.622809-6-satyanarayana.k.v.p@intel.com
Ensure VF migration recovery work is only queued when no recovery is
already queued and teardown is not in progress.
Fixes: b47c0c07c3 ("drm/xe/vf: Teardown VF post migration worker on driver unload")
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251210052546.622809-5-satyanarayana.k.v.p@intel.com
To support hot-unplug of this bridge we need to protect access to device
resources in case sn65dsi83_remove() happens concurrently to other code.
Some care is needed for the case when the unplug happens before
sn65dsi83_atomic_disable() has a chance to enter the critical section
(i.e. a successful drm_bridge_enter() call), which occurs whenever the
hardware is removed while the display is active. When that happens,
sn65dsi83_atomic_disable() in unable to release the resources taken by
sn65dsi83_atomic_pre_enable().
To ensure those resources are released exactly once on device removal:
* move the code to release them to a dedicated function
* register that function when the resources are taken in
sn65dsi83_atomic_pre_enable()
* if sn65dsi83_atomic_disable() happens before sn65dsi83_remove()
(typical non-hot-unplug case):
* sn65dsi83_atomic_disable() can enter the critical section
(drm_bridge_enter() returns 0) -> it releases and executes the
devres action
* if sn65dsi83_atomic_disable() happens after sn65dsi83_remove()
(typical hot-unplug case):
* sn65dsi83_remove() -> drm_bridge_unplug() prevents
sn65dsi83_atomic_disable() from entering the critical section
(drm_bridge_enter() returns nonzero), so sn65dsi83_atomic_disable()
cannot release and execute the devres action
* the devres action is executed at the end of sn65dsi83_remove()
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20251112-drm-bridge-atomic-vs-remove-v3-2-85db717ce094@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Some Xe bos are allocated with extra backing-store for the CCS
metadata. It's never been the intention to share the CCS metadata
when exporting such bos as dma-buf. Don't include it in the
dma-buf sg-table.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251209204920.224374-1-thomas.hellstrom@linux.intel.com
The GT stats interface is extended to include counters of how many
queues are either interrupted or waited on in the hardware engine
groups. This can help application debugging.
v2: Rename to queue as those operations are queue-based (Matthew Brost)
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251210165000.60789-1-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
MEI GSC interrupt comes from i915 or xe driver. It has top half and
bottom half. Top half is called from i915/xe interrupt handler. It
should be in irq disabled context.
With RT kernel(PREEMPT_RT enabled), by default IRQ handler is in
threaded IRQ. MEI GSC top half might be in threaded IRQ context.
generic_handle_irq_safe API could be called from either IRQ or
process context, it disables local IRQ then calls MEI GSC interrupt
top half.
This change fixes B580 GPU boot issue with RT enabled.
Fixes: e02cea83d3 ("drm/xe/gsc: add Battlemage support")
Tested-by: Baoli Zhang <baoli.zhang@intel.com>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251107033152.834960-1-junxiao.chang@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Whether AuxCCS can be properly supported depends on the support both from
the display side and non-display side of the driver.
Let us therefore allow for the non-display part to be queried via the
display parent interface.
The new interface replaces the HAS_AUX_CCS macro and we also remove the
FIXME from skl_universal_plane_create since now the xe will not advertise
the AuxCCS caps to start with so they do not need to be removed after
enumeration.
Also, by removing this build specific FIXME we come a step closer to fully
de-coupling display and non-display.
The existing HAS_AUX_CCS gets renamed to HAS_AUX_DIST since it is still
required for determining the need for PLANE_AUX_DIST programming.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
References: cf48bddd31 ("drm/i915/display: Disable AuxCCS framebuffers if built for Xe")
Cc: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com> # v1
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251209120034.9143-1-tursulin@igalia.com
Deeply daisy chained DP/MST displays are no longer able to light
up. This reverts commit e0dec00f3d ("drm/amd/display: Fix pbn
to kbps Conversion")
Cc: Jerry Zuo <jerry.zuo@amd.com>
Reported-by: nat@nullable.se
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4756
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e1c94109c7)
Cc: stable@vger.kernel.org # 6.17+
Unbinding amdgpu has no problems, but binding it again leads to an
error of sysfs file already existing. This is because it wasn't
actually cleaned up on unbind. Add the missing cleanup step.
Fixes: 547aad32ed ("drm/amdgpu: add VCN4 ip block support")
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d717e62e9b)
Cc: stable@vger.kernel.org
Set xcp id for mes ring
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support rlc autload for muti-xcc on gfx v12_1.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply TCP_UTCL0_CNTL1 settings to all the available
xcc
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
