This reverts commit 5a9b0c7418.
The switch from AUX interrupts to pollign was very hand-wavy.
Yes, there have been some situations in CI on a few platforms
where the AUX hardware seemingly forgets to signal the timeout,
but those have been happening after we switched to polling as
well. So I don't think we have any conclusive evidence that
polling actually helps here.
Someone really should root cause the actual problem, and see
if there is a proper workaround we could implemnt (eg. disabling
clock gating/etc.). In the meantime just go back to using the
interrupt for AUX completion.
If the hardware fails to signal the timeout we will just hit
the wait_event_timeout() software timeout instead. I suppose
we could try to tune the software timeout to more closely
match the expected hardware timeout. Might need to use
wait_event_hrtimeout() or something to avoid jiffies
granularity issues...
The AUX polling is also a hinderance towards using poll_timeout_us()
because we have a very long timeout, but would need a fairly short
polling interval to keep AUX transfer reasonably fast. Someone would
need to come up with good numbers in a somewhat scientific way.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251119185310.10428-3-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Apparently the DDI A/B AUX interrupts move onto the PICA side
on LNL. Unmask them properly so that we actually get the
interrupts. The interrupt handler was already trying to handle
them despite the interrupts remaining masked.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251119185310.10428-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Another (somewhat expensive) drm_format_info() call has
appeared in intel_plane_can_async_flip(). That one may get
called several times per commit so we need to get rid of
it.
Fortunately most callers already have the framebuffer at
hand, so we can just grab the format info from there.
The one exception is intel_plane_format_mod_supported_async()
where we have to do the lookup. But that only gets called
(a bunch of times) during driver init to build the
IN_FORMATS_ASYNC blob, and afterwards there is no runtime
cost.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251112233030.24117-4-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Since old kernel versions wouldn't expose the IN_FORMATS_ASYNC blob,
userspace can't really use the absence of the blob to determine
that async flips aren't supported. Thus it seems better to always
expose the blob on all planes, whether they support async flips
or not. The blob will simply not indicate any format+modifier
combinations as supported on planes that aren't async flip capable.
Currently we expose the blob for all skl+ universal planes (even
though we implement async flips only for the first plane on each
pipe), and i9xx primary planes (for ilk+ we have async flips support,
for pre-ilk we do not). Complete the full set by also expsosing
the blob on pre-skl sprite planes, and cursors.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251112233030.24117-3-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Use the standard variable names for things, and get rid of any
annoying aliasing variables. And sprinkle the consts in while at
it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251119181606.17129-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use hw.crtc as opposed to uapi.crtc in the panic code. I suspect
this stuff doesn't handle joiner correctly in other ways either
but can't be bothered to dig deeper.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251119181606.17129-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We're interested in the actual hardware state rather than the uapi
state, so grab the crtc active flag from the correct spot.
In practice the two will be identical here becase
.get_initial_plane_config() will reject the initial FB when
joiner is active.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251119181606.17129-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Presumably we're tryign to check if the hw plane is actually
rotated or not, so grab that information from the correct
plane (hw.rotation).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251119181606.17129-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
uapi.crtc is not set for joiner secondary pipes, so generally
should not be used anywhere after the initial state copy. Switch
to hw.crtc which actually indicates that the plane is enabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251119181606.17129-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
uapi.crtc is NULL for joiner secondary pipes, so using that is
nonsense in most places. Switch to hw.crtc so that we use the
deferred cursor unpin also on joiner secondary pipes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251119181606.17129-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
If power state is retained between suspend/resume cycle, we don't need
to perform full GT re-initialization. Introduce runtime helpers for GT
which greatly reduce suspend/resume delay.
v2: Drop redundant xe_gt_sanitize() and xe_guc_ct_stop() (Daniele)
Use runtime naming for guc helpers (Daniele)
v3: Drop redundant logging, add kernel doc (Michal)
Use runtime naming for ct helpers (Michal)
v4: Fix tags (Rodrigo)
v5: Include host_l2_vram workaround (Daniele)
Reuse xe_guc_submit_enable/disable() helpers (Daniele)
Co-developed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251030122357.128825-5-raag.jadav@intel.com
We hold an additional reference to the runtime PM to keep PF in D0
during VFs lifetime, as our VFs do not implement the PM capability.
This means we should never be runtime suspending as long as VFs are
enabled.
v8: Add !IS_SRIOV_VF() assert (Matthew Brost)
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251030122357.128825-4-raag.jadav@intel.com
Introduce pause/unpause() helpers which stop/start further runs of
submission tasks on given GuC and can be called from PF context. This
is in preparation of usecases where we simply need to stop/start the
scheduler without losing GuC state and don't require dealing with VF
migration.
v7: Reword commit message (Matthew Brost)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251030122357.128825-3-raag.jadav@intel.com
Now that pause/unpause() helpers have been updated for VF migration
usecase, update their naming to match the functionality and while at it,
add IS_SRIOV_VF() assert to make sure they are not abused.
v7: Add IS_SRIOV_VF() assert (Matthew Brost)
Use "vf" suffix (Michal)
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251030122357.128825-2-raag.jadav@intel.com
Previously, VRAM TTM resource manager debugfs entries (vram0_mm / vram1_mm)
were created globally in the XE debugfs root directory. But technically,
each tile has an associated VRAM TTM manager, which it can own.
Let's create VRAM memory manager debugfs entries directly under each tile's
debugfs directory for better alignment with the per-tile memory layout.
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20251127073643.144379-1-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
pf_descriptor_init currently returns a size_t, which is an unsigned
integer data type. This conflicts with it returning a negative errno
value on failure.
Make it return an int instead. This mirrors how pf_trailer_init is used
later.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Alex Zuo <alex.zuo@intel.com>
Link: https://patch.msgid.link/20251117190114.69953-2-jonathan.cavitt@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
This patchset enables support for the Gamma 2.2.
With this patch the following IGT subtests pass:
kms_colorop --run plane-XR30-XR30-gamma_2_2
kms_colorop --run plane-XR30-XR30-gamma_2_2_inv-gamma_2_2
kms_colorop --run plane-XR30-XR30-gamma_2_2_inv-gamma_2_2-gamma_2_2_inv
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-52-alex.hung@amd.com
Add "DRM_COLOROP_1D_CURVE_GAMMA22" and DRM_COLOROP_1D_CURVE_GAMMA22_INV
subtypes to drm_colorop of DRM_COLOROP_1D_CURVE.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-51-alex.hung@amd.com
Check dpp.hw_3d_lut before creating shaper tf/lut and 3dlut colorops in
colorpipeline and handling these colorops.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-49-alex.hung@amd.com
Add kernel doc for AMD color pipeline.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-48-alex.hung@amd.com
This adds support for a 3D LUT.
The color pipeline now consists of the following colorops:
1. 1D curve colorop
2. Multiplier
3. 3x4 CTM
4. 1D curve colorop
5. 1D LUT
6. 3D LUT
7. 1D curve colorop
8. 1D LUT
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-47-alex.hung@amd.com
It is to be used to enable HDR by allowing userpace to create and pass
3D LUTs to kernel and hardware.
new drm_colorop_type: DRM_COLOROP_3D_LUT.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-46-alex.hung@amd.com
Not all HW will be able to do bypass on all color
operations. Introduce an 32 bits 'flags' for all colorop
init functions and DRM_COLOROP_FLAG_ALLOW_BYPASS for creating
the BYPASS property when it's true.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-45-alex.hung@amd.com
We want to make sure userspace is aware of the 1D LUT
interpolation. While linear interpolation is common it
might not be supported on all HW. Give driver implementers
a way to specify their interpolation.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-44-alex.hung@amd.com
Swap the order of matrix and multiplier as designed in hardware.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-43-alex.hung@amd.com
This adds support for a multiplier. This multiplier is
programmed via the HDR Multiplier in DCN.
With this change the following IGT tests pass:
kms_colorop --run plane-XR30-XR30-multiply_125
kms_colorop --run plane-XR30-XR30-multiply_inv_125
The color pipeline now consists of the following colorops:
1. 1D curve colorop
2. 3x4 CTM
3. Multiplier
4. 1D curve colorop
5. 1D LUT
6. 1D curve colorop
7. 1D LUT
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-42-alex.hung@amd.com
This introduces a new drm_colorop_type: DRM_COLOROP_MULTIPLIER.
It's a simple multiplier to all pixel values. The value is
specified via a S31.32 fixed point provided via the
"MULTIPLIER" property.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-41-alex.hung@amd.com
This adds support for a 3x4 color transformation matrix.
With this change the following IGT tests pass:
kms_colorop --run plane-XR30-XR30-ctm_3x4_50_desat
kms_colorop --run plane-XR30-XR30-ctm_3x4_overdrive
kms_colorop --run plane-XR30-XR30-ctm_3x4_oversaturate
kms_colorop --run plane-XR30-XR30-ctm_3x4_bt709_enc
kms_colorop --run plane-XR30-XR30-ctm_3x4_bt709_dec
The color pipeline now consists of the following colorops:
1. 1D curve colorop
2. 3x4 CTM
3. 1D curve colorop
4. 1D LUT
5. 1D curve colorop
6. 1D LUT
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-40-alex.hung@amd.com
This patch adds colorops for custom 1D LUTs in the SHAPER and
BLND HW blocks.
With this change the following IGT tests pass:
kms_colorop --run plane-XR30-XR30-srgb_inv_eotf_lut
kms_colorop --run plane-XR30-XR30-srgb_inv_eotf_lut-srgb_eotf_lut
The color pipeline now consists of the following colorops:
1. 1D curve colorop
2. 1D curve colorop
3. 1D LUT
4. 1D curve colorop
5. 1D LUT
The 1D curve colorops support sRGB, BT2020, and PQ scaled to 125.0.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-39-alex.hung@amd.com
We've previously introduced DRM_COLOROP_1D_CURVE for
pre-defined 1D curves. But we also have HW that supports
custom curves and userspace needs the ability to pass
custom curves, aka LUTs.
This patch introduces a new colorop type, called
DRM_COLOROP_1D_LUT that provides a SIZE property which
is used by a driver to advertise the supported SIZE
of the LUT, as well as a DATA property which userspace
uses to set the LUT.
DATA and size function in the same way as current drm_crtc
GAMMA and DEGAMMA LUTs.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Co-developed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-38-alex.hung@amd.com
Existing LUT precision structure drm_color_lut has only 16 bit
precision. This is not enough for upcoming enhanced hardwares
and advance usecases like HDR processing. Hence added a new
structure with 32 bit precision values.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-36-alex.hung@amd.com
This adds support for the BT.709/BT.2020 transfer functions
on all current 1D curve plane colorops, i.e., on DEGAM, SHAPER,
and BLND blocks.
With this change the following IGT subtests pass:
kms_colorop --run plane-XR30-XR30-bt2020_inv_oetf
kms_colorop --run plane-XR30-XR30-bt2020_oetf
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-35-alex.hung@amd.com
The BT.709 and BT.2020 OETFs are the same, the only difference
being that the BT.2020 variant is defined with more precision
for 10 and 12-bit per color encodings.
Both are used as encoding functions for video content, and are
therefore defined as OETF (opto-electronic transfer function)
instead of as EOTF (electro-optical transfer function).
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-34-alex.hung@amd.com
This patchset enables support for the PQ_125 EOTF and its inverse
on all existing plane 1D curve colorops, i.e., on DEGAM, SHAPER,
and BLND blocks.
With this patchset the following IGT subtests are passing:
kms_colorop --run plane-XR30-XR30-pq_125_eotf
kms_colorop --run plane-XR30-XR30-pq_125_inv_eotf
kms_colorop --run plane-XR30-XR30-pq_125_eotf-pq_125_inv_eotf
kms_colorop --run plane-XR30-XR30-pq_125_eotf-pq_125_inv_eotf-pq_125_eotf
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-33-alex.hung@amd.com
The PQ function defines a mapping of code values to nits (cd/m^2).
The max code value maps to 10,000 nits.
Windows DWM's canonical composition color space (CCCS) defaults
to composing SDR contents to 80 nits and uses a float value of
1.0 to represent this. For this reason AMD HW hard-codes a PQ
function that is scaled by 125, yielding 80 nit PQ values for
1.0 and 10,000 nits at 125.0.
This patch introduces this scaled PQ EOTF and its inverse as
1D curve types.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-32-alex.hung@amd.com
Expose a 3rd 1D curve colorop, with support for
DRM_COLOROP_1D_CURVE_SRGB_EOTF and program the BLND block
to perform the sRGB transform when the colorop is not in
bypass
With this change the following IGT test passes:
kms_colorop --run plane-XR30-XR30-srgb_eotf-srgb_inv_eotf-srgb_eotf
The color pipeline now consists of the following colorops:
1. 1D curve colorop w/ sRGB EOTF support
2. 1D curve colorop w/ sRGB Inverse EOTF support
3. 1D curve colorop w/ sRGB EOTF support
Signed-off-by: Alex Hung <alex.hung@amd.com>
Co-developed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-31-alex.hung@amd.com
Expose a 2nd curve colorop with support for
DRM_COLOROP_1D_CURVE_SRGB_INV_EOTF and program HW to
perform the sRGB Inverse EOTF on the shaper block
when the colorop is not in bypass.
With this change the follow IGT tests pass:
kms_colorop --run plane-XR30-XR30-srgb_inv_eotf
kms_colorop --run plane-XR30-XR30-srgb_eotf-srgb_inv_eotf
The color pipeline now consists of the following colorops:
1. 1D curve colorop w/ sRGB EOTF support
2. 1D curve colorop w/ sRGB Inverse EOTF support
Signed-off-by: Alex Hung <alex.hung@amd.com>
Co-developed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-30-alex.hung@amd.com
Expose one 1D curve colorop with support for
DRM_COLOROP_1D_CURVE_SRGB_EOTF and program HW to perform
the sRGB transform when the colorop is not in bypass.
With this change the following IGT test passes:
kms_colorop --run plane-XR30-XR30-srgb_eotf
The color pipeline now consists of a single colorop:
1. 1D curve colorop w/ sRGB EOTF
Signed-off-by: Alex Hung <alex.hung@amd.com>
Co-developed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-29-alex.hung@amd.com
cursor plane does not need to have color pipeline.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-28-alex.hung@amd.com
Add the default Bypass pipeline and ensure it passes the
kms_colorop test plane-XR30-XR30-bypass.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-27-alex.hung@amd.com
When the plane_color_pipeline bit is set we should ignore
deprecated properties, such as COLOR_RANGE and COLOR_ENCODING.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-26-alex.hung@amd.com
Drivers will need to know whether an atomic check/commit
originated from a client with DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
so they can ignore deprecated properties, like COLOR_ENCODING
and COLOR_RANGE.
Pass the plane_color_pipeline bit to drm_atomic_state.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-24-alex.hung@amd.com
A whole slew of tests for CTM handling that greatly helped in
debugging the CTM code. The extent of tests might seem a bit
silly but they're fast and might someday help save someone
else's day when debugging this.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-23-alex.hung@amd.com
While working on the CTM implementation of VKMS I had to ascertain
myself of a few assumptions. One of those is whether drm_fixed.h
treats its numbers using signed-magnitude or twos-complement. It is
twos-complement.
In order to make someone else's day easier I am adding the
drm_test_int2fixp test that validates the above assumption.
I am also adding a test for the new sm2fixp function that converts
from a signed-magnitude fixed point to the twos-complement fixed
point.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-22-alex.hung@amd.com
We add two 3x4 matrices into the VKMS color pipeline. The reason
we're adding matrices is so that we can test that application
of a matrix and its inverse yields an output equal to the input
image.
One complication with the matrix implementation has to do with
the fact that the matrix entries are in signed-magnitude fixed
point, whereas the drm_fixed.h implementation uses 2s-complement.
The latter one is the one that we want for easy addition and
subtraction, so we convert all entries to 2s-complement.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-21-alex.hung@amd.com
Certain operations require us to preserve values below 0.0 and
above 1.0 (0x0 and 0xffff respectively in 16 bpc unorm). One
such operation is a BT709 encoding operation followed by its
decoding operation, or the reverse.
We'll use s32 values as intermediate in and outputs of our
color operations, for the operations where it matters.
For now this won't apply to LUT operations. We might want to
update those to work on s32 as well, but it's unclear how
that should work for unorm LUT definitions. We'll revisit
that once we add LUT + CTM tests.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-20-alex.hung@amd.com
This type is used to support a 3x4 matrix in colorops. A 3x4
matrix uses the last column as a "bias" column. Some HW exposes
support for 3x4. The calculation looks like:
out matrix in
|R| |0 1 2 3 | | R |
|G| = |4 5 6 7 | x | G |
|B| |8 9 10 11| | B |
|1.0|
This is also the first colorop where we need a blob property to
program the property. For that we'll introduce a new DATA
property that can be used by all colorop TYPEs requiring a
blob. The way a DATA blob is read depends on the TYPE of
the colorop.
We only create the DATA property for property types that
need it.
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-19-alex.hung@amd.com
Two tests are added to VKMS LUT handling:
- linear
- inv_srgb
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-18-alex.hung@amd.com
