There is some probability that reset workqueue is blocked by KIQ I/O for 10+ seconds after gpu hangs.
So we need to add a in_reset check during each KIQ register poll.
Signed-off-by: Heng Zhou <Heng.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Scaling doesn't work on DCE6 at the moment, the current
register programming produces incorrect output when using
fractional scaling (between 100-200%) on resolutions higher
than 1080p.
Disable it until we figure out how to program it properly.
Fixes: 7c15fd86aa ("drm/amd/display: dc/dce: add initial DCE6 support (v10)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SCL_SCALER_ENABLE can be used to enable/disable the scaler
on DCE6. Program it to 0 when scaling isn't used, 1 when used.
Additionally, clear some other registers when scaling is
disabled and program the SCL_UPDATE register as recommended.
This fixes visible glitches for users whose BIOS sets up a
mode with scaling at boot, which DC was unable to clean up.
Fixes: b70aaf5586 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously, the code would set a bit field which didn't exist
on DCE6 so it would be effectively a no-op.
Fixes: b70aaf5586 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without these, it's impossible to program these registers.
Fixes: 102b2f587a ("drm/amd/display: dce_transform: DCE6 Scaling Horizontal Filter Init (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmjkpakTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXip5B/48MvTFJ1qwRGPVzevZQ8Z4SDogEREp
69VS/xRf1YCIzyXyanwqf1dXLq8NAqicSp6ewpJAmNA55/9O0cwT2EtohjeGCu61
krPIvS3KT7xI0uSEniBdhBtALYBscnQ0e3cAbLNzL7bwA6Q6OmvoIawpBADgE/cW
aZNCK9jy+WUqtXc6lNtkJtST0HWGDn0h04o2hjqIkZ+7ewjuEEJBUUB/JZwJ41Od
UxbID0PAcn9O4n/u/Y/GH65MX+ddrdCgPHEGCLAGAKT24lou3NzVv445OuCw0c4W
ilALIRb9iea56ZLVBW5O82+7g9Ag41LGq+841MNlZjeRNONGykaUpTWZ
=OR26
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Unify guest entry code for KVM and MSHV (Sean Christopherson)
- Switch Hyper-V MSI domain to use msi_create_parent_irq_domain()
(Nam Cao)
- Add CONFIG_HYPERV_VMBUS and limit the semantics of CONFIG_HYPERV
(Mukesh Rathor)
- Add kexec/kdump support on Azure CVMs (Vitaly Kuznetsov)
- Deprecate hyperv_fb in favor of Hyper-V DRM driver (Prasanna
Kumar T S M)
- Miscellaneous enhancements, fixes and cleanups (Abhishek Tiwari,
Alok Tiwari, Nuno Das Neves, Wei Liu, Roman Kisel, Michael Kelley)
* tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyperv: Remove the spurious null directive line
MAINTAINERS: Mark hyperv_fb driver Obsolete
fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driver
Drivers: hv: Make CONFIG_HYPERV bool
Drivers: hv: Add CONFIG_HYPERV_VMBUS option
Drivers: hv: vmbus: Fix typos in vmbus_drv.c
Drivers: hv: vmbus: Fix sysfs output format for ring buffer index
Drivers: hv: vmbus: Clean up sscanf format specifier in target_cpu_store()
x86/hyperv: Switch to msi_create_parent_irq_domain()
mshv: Use common "entry virt" APIs to do work in root before running guest
entry: Rename "kvm" entry code assets to "virt" to genericize APIs
entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper
mshv: Handle NEED_RESCHED_LAZY before transferring to guest
x86/hyperv: Add kexec/kdump support on Azure CVMs
Drivers: hv: Simplify data structures for VMBus channel close message
Drivers: hv: util: Cosmetic changes for hv_utils_transport.c
mshv: Add support for a new parent partition configuration
clocksource: hyper-v: Skip unnecessary checks for the root partition
hyperv: Add missing field to hv_output_map_device_interrupt
Add KUnit test cases that create severe memory fragmentation and
measure allocation/free performance.
The tests simulate two scenarios -
1. Allocation under severe fragmentation
- Allocate the entire 4 GiB space as 8 KiB blocks with 64 KiB alignment,
split them into two groups and free with mixed flags to block coalescing.
- Repeatedly allocate and free 64 KiB blocks while timing the loop.
- Freelist runtime: 76475 ms(76.5 seconds), soft-lockup triggered.
RB-tree runtime: 186 ms.
2. Reverse free order under fragmentation
- Create a similarly fragmented space, free half the blocks, reverse
the order of the remainder, and release them with the cleared flag.
- Freelist runtime: 85620 ms(85.6 seconds).
RB-tree runtime: 114 ms.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20251006095124.1663-3-Arunpravin.PaneerSelvam@amd.com
Maintain two separate RB trees per order - one for clear (zeroed) blocks
and another for dirty (uncleared) blocks. This separation improves
code clarity and makes it more obvious which tree is being searched
during allocation. It also improves scalability and efficiency when
searching for a specific type of block, avoiding unnecessary checks
and making the allocator more predictable under fragmentation.
The changes have been validated using the existing drm_buddy_test
KUnit test cases, along with selected graphics workloads,
to ensure correctness and avoid regressions.
v2: Missed adding the suggested-by tag. Added it in v2.
v3(Matthew):
- Remove the double underscores from the internal functions.
- Rename the internal functions to have less generic names.
- Fix the error handling code.
- Pass tree argument for the tree macro.
- Use the existing dirty/free bit instead of new tree field.
- Make free_trees[] instead of clear_tree and dirty_tree for
more cleaner approach.
v4:
- A bug was reported by Intel CI and it is fixed by
Matthew Auld.
- Replace the get_root function with
&mm->free_trees[tree][order] (Matthew)
- Remove the unnecessary rbtree_is_empty() check (Matthew)
- Remove the unnecessary get_tree_for_flags() function.
- Rename get_tree_for_block() name with get_block_tree() for more
clarity.
v5(Jani Nikula):
- Don't use static inline in .c files.
- enum free_tree and enumerator names are quite generic for a header
and usage and the whole enum should be an implementation detail.
v6:
- Rewrite the __force_merge() function using the rb_last() and rb_prev().
v7(Matthew):
- Replace the open-coded tree iteration for loops with the
for_each_free_tree() macro throughout the code.
- Fixed out_free_roots to prevent double decrement of i,
addressing potential crash.
- Replaced enum drm_buddy_free_tree with unsigned int
in for_each_free_tree loops.
Cc: stable@vger.kernel.org
Fixes: a68c7eaa7a ("drm/amdgpu: Enable clear page functionality")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4260
Link: https://lore.kernel.org/r/20251006095124.1663-2-Arunpravin.PaneerSelvam@amd.com
Replace the freelist (O(n)) used for free block management with a
red-black tree, providing more efficient O(log n) search, insert,
and delete operations. This improves scalability and performance
when managing large numbers of free blocks per order (e.g., hundreds
or thousands).
In the VK-CTS memory stress subtest, the buddy manager merges
fragmented memory and inserts freed blocks into the freelist. Since
freelist insertion is O(n), this becomes a bottleneck as fragmentation
increases. Benchmarking shows list_insert_sorted() consumes ~52.69% CPU
with the freelist, compared to just 0.03% with the RB tree
(rbtree_insert.isra.0), despite performing the same sorted insert.
This also improves performance in heavily fragmented workloads,
such as games or graphics tests that stress memory.
As the buddy allocator evolves with new features such as clear-page
tracking, the resulting fragmentation and complexity have grown.
These RB-tree based design changes are introduced to address that
growth and ensure the allocator continues to perform efficiently
under fragmented conditions.
The RB tree implementation with separate clear/dirty trees provides:
- O(n log n) aggregate complexity for all operations instead of O(n^2)
- Elimination of soft lockups and system instability
- Improved code maintainability and clarity
- Better scalability for large memory systems
- Predictable performance under fragmentation
v3(Matthew):
- Remove RB_EMPTY_NODE check in force_merge function.
- Rename rb for loop macros to have less generic names and move to
.c file.
- Make the rb node rb and link field as union.
v4(Jani Nikula):
- The kernel-doc comment should be "/**"
- Move all the rbtree macros to rbtree.h and add parens to ensure
correct precedence.
v5:
- Remove the inline in a .c file (Jani Nikula).
v6(Peter Zijlstra):
- Add rb_add() function replacing the existing rbtree_insert() code.
v7:
- A full walk iteration in rbtree is slower than the list (Peter Zijlstra).
- The existing rbtree_postorder_for_each_entry_safe macro should be used
in scenarios where traversal order is not a critical factor (Christian).
v8(Matthew):
- Remove the rbtree_is_empty() check in this patch as well.
Cc: stable@vger.kernel.org
Fixes: a68c7eaa7a ("drm/amdgpu: Enable clear page functionality")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20251006095124.1663-1-Arunpravin.PaneerSelvam@amd.com
Due to the use of the file operation flows, we might encode the
VF config blob multiple times. Avoid that by capturing it once
during the open() operation instead of the read() operation.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20251004162036.1800-1-michal.wajdeczko@intel.com
- Fix userptr to not allow device private pages with SVM (Thomas
Hellström)
Driver Changes:
- Fix build with clang 16 (Michal Wajdeczko)
- Fix handling of invalid configfs syntax usage and spell out the
expected syntax in the documentation (Lucas De Marchi)
- Do not try late bind firmware when running as VF since it
shouldn't handle firmware loading (Michal Wajdeczko)
- Fix idle assertion for local BOs (Thomas Hellström)
- Fix uninitialized variable for late binding (Colin Ian King,
Mallesh Koujalagi)
- Do not require perfmon_capable to expose free memory at page
granularity. Handle it like other drm drivers do (Matthew Auld)
- Fix lock handling on suspend error path (Shuicheng Lin)
- Fix I2C controller resume after S3 (Raag Jadav)
-----BEGIN PGP SIGNATURE-----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=UCOn
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-fixes-2025-10-03' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Cross-subsystem Changes:
- Fix userptr to not allow device private pages with SVM (Thomas
Hellström)
Driver Changes:
- Fix build with clang 16 (Michal Wajdeczko)
- Fix handling of invalid configfs syntax usage and spell out the
expected syntax in the documentation (Lucas De Marchi)
- Do not try late bind firmware when running as VF since it
shouldn't handle firmware loading (Michal Wajdeczko)
- Fix idle assertion for local BOs (Thomas Hellström)
- Fix uninitialized variable for late binding (Colin Ian King,
Mallesh Koujalagi)
- Do not require perfmon_capable to expose free memory at page
granularity. Handle it like other drm drivers do (Matthew Auld)
- Fix lock handling on suspend error path (Shuicheng Lin)
- Fix I2C controller resume after S3 (Raag Jadav)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/q6yeyb7n2eqo5megxjqayooajirx5hhsntfo65m3y4myscz7oz@25qbabbbr4hj
There might be some malicious VFs that by sending an invalid VF2PF
relay messages will flood PF's dmesg with our diagnostics messages.
Rate limit all relay messages, unless running in DEBUG_SRIOV mode.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20251005173946.2784-1-michal.wajdeczko@intel.com
We already have tile-based printk macros, there is no need to
manually prepare MEMIRQ specific messages to include tile id.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20251005133641.2651-5-michal.wajdeczko@intel.com
Since now we have tile-based SR-IOV printk macros, there is no
need to manually prepare the LMTT specific warning message (that
is now upgraded to proper error level message) nor to use generic
debug message without tile/LMTT identification.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20251005133641.2651-4-michal.wajdeczko@intel.com
We already have device and GT level SR-IOV specific macros, but
unlike native case, we don't have yet tile-based ones.
Add macros to match native use case and also update GT-based
macros to rely on those new tile-based SR-IOV macros. This will
slightly rearrange the output of the GT logs and instead:
[...] Tile0: GT0: PF: pushed VF1 config with 2 KLVs...
we might see:
[...] PF: Tile0: GT0: pushed VF1 config with 2 KLVs...
but that's even better.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20251005133641.2651-3-michal.wajdeczko@intel.com
While the late PF per-GT initialization is done quite late in the
single GT initialization flow, in case of multi-GT platforms, it
may still be done before other GT early initialization. That leads
to some issues during unwind, when there are cross-GT dependencies,
like resource cleanup that is shared by both GTs, but the other GT
may already be sanitized or disabled.
The following errors could be observed when trying to unload the PF
driver with some LMEM/VRAM already provisioned for few VFs:
[ ] xe 0000:03:00.0: DEVRES REL ffff88814708f240 fini_config (16 bytes)
[ ] xe 0000:03:00.0: [drm:lmtt_write_pte [xe]] PF: LMTT: WRITE level=2 index=1 pte=0x0
[ ] xe 0000:03:00.0: [drm:lmtt_invalidate_hw [xe]] PF: LMTT: num_fences=2 err=-19
[ ] xe 0000:03:00.0: [drm:lmtt_pt_free [xe]] PF: LMTT: level=0 addr=53a470000
[ ] xe 0000:03:00.0: [drm:lmtt_pt_free [xe]] PF: LMTT: level=1 addr=53a4b0000
[ ] xe 0000:03:00.0: [drm:lmtt_invalidate_hw [xe]] PF: LMTT: num_fences=2 err=-19
[ ] xe 0000:03:00.0: [drm] PF: LMTT0 invalidation failed (-ENODEV)
[ ] xe 0000:03:00.0: [drm:lmtt_write_pte [xe]] PF: LMTT: WRITE level=2 index=2 pte=0x0
[ ] xe 0000:03:00.0: [drm:lmtt_invalidate_hw [xe]] PF: LMTT: num_fences=2 err=-19
[ ] xe 0000:03:00.0: [drm:lmtt_pt_free [xe]] PF: LMTT: level=0 addr=539b70000
[ ] xe 0000:03:00.0: [drm:lmtt_pt_free [xe]] PF: LMTT: level=1 addr=539bf0000
[ ] xe 0000:03:00.0: [drm:lmtt_invalidate_hw [xe]] PF: LMTT: num_fences=2 err=-19
[ ] xe 0000:03:00.0: [drm] PF: LMTT0 invalidation failed (-ENODEV)
Move all PF per-GT late initialization to the already defined late
SR-IOV initialization function to allow proper order of the cleanup
actions.
While around, format all PF function stubs as one-liners, like many
other stubs are defined in the Xe driver.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20251004162008.1782-1-michal.wajdeczko@intel.com
Code was wrongly passing sizeof(uval) as the number base to use,
and unlike other debugfs entries that represent bool data, it
wasn't using the dedicated function to parse user input as bool.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20251002192736.203186-1-michal.wajdeczko@intel.com
For pure SR-IOV debugging there is no need to select already
separated config for the debugging of the memory based interrupts,
as the latter is also very noisy on its own. Change config order
and use a weak reverse dependency instead.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20251002171308.203127-1-michal.wajdeczko@intel.com
- Correct copyright year from "2002" to "2022".
- Rename ttm_vram_mgr_fini() to xe_ttm_vram_mgr_fini() to avoid
confusion with generic TTM helpers.
No functional changes intended.
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://lore.kernel.org/r/20251004000425.2489291-2-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
'entry' should be 'val' which is the loop iterator.
Fixes: 9e931f2e09 ("drm/vmwgfx: Refactor resource validation hashtable to use linux/hashtable implementation.")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250926195427.1405237-2-ian.forbes@broadcom.com
Nodes stored in the validation duplicates hashtable come from an arena
allocator that is cleared at the end of vmw_execbuf_process. All nodes
are expected to be cleared in vmw_validation_drop_ht but this node escaped
because its resource was destroyed prematurely.
Fixes: 64ad2abfe9 ("drm/vmwgfx: Adapt validation code for reference-free lookups")
Reported-by: Kuzey Arda Bulut <kuzeyardabulut@gmail.com>
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250926195427.1405237-1-ian.forbes@broadcom.com
Check that the resource which is converted to a surface exists before
trying to use the cursor snooper on it.
vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers
because some svga commands accept SVGA3D_INVALID_ID to mean "no surface",
unfortunately functions that accept the actual surfaces as objects might
(and in case of the cursor snooper, do not) be able to handle null
objects. Make sure that we validate not only the identifier (via the
vmw_cmd_res_check) but also check that the actual resource exists before
trying to do something with it.
Fixes unchecked null-ptr reference in the snooping code.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: c0951b797e ("drm/vmwgfx: Refactor resource management")
Reported-by: Kuzey Arda Bulut <kuzeyardabulut@gmail.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://lore.kernel.org/r/20250917153655.1968583-1-zack.rusin@broadcom.com
The drm_atomic_get_private_obj_state() function tries to find if a
private_obj had already been allocated and was part of the given
drm_atomic_state. If one is found, it returns the existing state
pointer.
At the point in time where drm_atomic_get_private_obj_state() can be
called (ie, during atomic_check), the existing state is the new state
and we can thus replace the hand-crafted logic by a call to
drm_atomic_get_new_private_obj_state().
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-38-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The ingenic CRTC atomic_enable() implementation will indirectly call
drm_atomic_get_private_obj_state() through ingenic_drm_get_priv_state().
drm_atomic_get_private_obj_state() will either return the new state for
the object in the global state if it exists, or will allocate a new one
and add it to the global state.
atomic_enable() however isn't allowed to modify the global state. So
what the implementation should use is the
drm_atomic_get_new_private_obj_state() helper to get the new state for
the CRTC, without performing an extra allocation.
We still need to make sure the private state will be part of the global
state by the time atomic_enable runs, so we still need to call
ingenic_drm_get_priv_state() in atomic_check. We can then call
ingenic_drm_get_new_priv_state() in atomic_enable, which is a wrapper
around drm_atomic_get_new_private_obj_state().
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-37-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The atomic_remove_fb() function uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
Despite its name, this function builds and commit a new
drm_atomic_state, and the call to drm_atomic_get_existing_crtc_state()
is part of the state building, thus happening before the states are
swapped.
As such, the existing state points to the new state, and we can use
drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-34-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_atomic_connector_check() function uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-33-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The vc4 atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-32-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The vboxvideo atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-31-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The tilcdc atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-30-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The tegra atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-29-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The sun4i atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-28-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The rockchip atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-27-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The omap atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-26-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The msm atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-25-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The mediatek atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-24-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The loongson atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-23-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The logicvc atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-22-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The kmb atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-21-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The ingenic atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-20-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The imx-ipuv3 atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-19-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The imx-dcss atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-18-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The imx-dc atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-17-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The exynos atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-16-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The atmel-hlcdc atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-15-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The armada atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-14-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
