[why]
Current driver will cache the dispclk right after send cmd to pmfw,
but actual clock not reached yet.
Change to only cache the dispclk setting after HW reached to the real clock.
Also give some range as it might be in bypass clock setting.
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
This is a redundant field that is identically to optimized_required, so
just replace it.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
When stutter is disabled prior to watermark programming due to a w/a,
wm_pending should be returned as true.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Add new tracing and performance measurements for SMU messaging.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
SMU interfaces are not backwards and forwards compatible, so they should
be isolated per version.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
We need to inform DMUB whether fast sync in ultra sleep mode is supported,
so that it can disable desync error detection when the it is not enabled.
This helps prevent unexpected desync errors when transitioning out of
ultra sleep mode.
Add fast sync in ultra sleep mode field in replay copy setting command.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Allen Li <wei-guang.li@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Modifications in per asic capability means mpc.preblend flag should be used
to indicate preblend. Update relevant paths to use this flag.
Fixes: 3992305061 ("drm/amd/display: Clear DPP 3DLUT Cap")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Call power gating routine only if it is defined.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Sridevi Arvindekar <sarvinde@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Right now, only selected APUs have enabled DTM v3, which allows to use
newer firmware for content protection.
We want to enable it on the dGPUs starting with DCN 3.2
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver does not pick up and save vbios's clocks during init clocks,
the dispclk in clk_mgr will keep 0 until the first update clocks.
In some cases, OS changes the timing in the second set mode
(lower the pixel clock), causing the driver to lower the dispclk
in prepare bandwidth, which is illegal and causes grey screen.
[How]
1. Dump and save the vbios's clocks, and init the dispclk in
dcn314_init_clocks.
2. Fix the condition in dcn314_update_clocks, regarding a 0kHz value.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the first data point for a custom brightness curve is not 0% luminance
then the first few luminance values will be ignored.
[How]
Check signal is below first data point and if so do linear interpolation to
0 instead.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
According to the vendor’s requirement, after each OUI write,
the PSR cap must be read; otherwise, the vendor will default
to using PSRSU. But its PSR cap indicates that it only supports
PSR1.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Ensure AVI infoframe updates from stream updates are applied to the active
stream so OS overrides are not lost.
[HOW]
Copy avi_infopacket to stream when valid flag is set.
Follow existing infopacket copy pattern and perform a basic validity check before assignment.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
dc_post_update_surfaces_to_stream needs to be called after a full update
completes in order to optimize clocks and watermarks for power. Add
missing calls before idle entry is requested to ensure optimal power.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Reprogramming watermarks with stutter allowed can cause instability on
some ASICs. Disable it prior to raising watermarks (prepare bandwidth),
then re-enable after lowering (optimize bandwidth).
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align vcn5_fw_shared structure with FW
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MES set resources packet has an optional bit 'lr_compute_wa'
which can be used for preventing MES hangs on long compute jobs.
Set this bit by default.
Co-developed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
we dont need to allocate local array of pages to hold
the pages returned by the hmm, instead we could use
the hmm_range structure itself to get to hmm_pfn
and get the required pages directly.
This avoids call to alloc/free quite a lot.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Place the smu 13.0.0 pptable header in the correct folder
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Mangesh Gadre <mangesh.gadre@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not necessary that the build string and atom header section has a
difference of 32 bytes. Use the remaining bytes in the section as copy
limit.
Fixes: d6fa802661 ("drm/amdgpu: Add vbios build number interface")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure the headers are sorted alphabetically to ensure consistent
code.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
The function is unused; remove it.
Instead of relying on a general blit helper, drivers should pick a blit
function by themselves from their list of supported color formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-4-tzimmermann@suse.de
Some configurations of sysfb outputs require format conversion from
framebuffer to scanout buffer. It is a driver bug if the conversion
helper is missing, yet it might happen on odd scanout formats. The old
code, based on drm_fb_blit(), only detects this situation during the
commit's hardware update, which is too late to abort the update.
Lookup the correct blit helper as part of the check phase. Then store
it in the sysfb plane state. Allows for detection of a missing helper
before the commit has started. Also avoids drm_fb_blit()'s large switch
statement on each updated scanline. Only a single lookup has to be done.
The lookup is in drm_sysfb_get_blit_func(), which only tracks formats
supported by sysfb drivers.
The lookup happens in sysfb's begin_fb_access helper instead of its
atomic_check helper. This allows vesadrm, and possibly other drivers,
to implement their own atomic_check without interfering with blit
lookups. Vesadrm implements XRGB8888 on top of R8 formats with the
help of the atomic_check. Doing the blit lookup in begin_fb_access then
always uses the correct CRTC format on all drivers.
v2:
- vesadrm: use drm_sysfb_plane_helper_begin_fb_access()
- fix type in commit description (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-3-tzimmermann@suse.de
The plane-state type struct drm_sysfb_plane_state will store the
helper for blitting to the scanout buffer.
v2:
- add variable for duplicated shadow-plane state (Javier)
- fix build error
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-2-tzimmermann@suse.de
Similar to how we annotate dma-fences, add lockep annotation to
the pm_block completion to ensure we don't wait for it while holding
locks that are needed in the pm notifier or in the device
suspend / resume callbacks.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250918142848.21807-3-thomas.hellstrom@linux.intel.com
During pm notifier eviction we may still race with validations.
Ensure those are blocked out during eviction to ensure we have
access to as much system memory as possible.
During the suspend operation itself, we run single-threaded so that
shouldn't be a problem.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250918142848.21807-2-thomas.hellstrom@linux.intel.com
The driver uses drm_gem_shmem_prime_import_no_map() and
drm_gem_shmem_dumb_create(), but the Kconfig currently selects
DRM_GEM_DMA_HELPER instead of DRM_GEM_SHMEM_HELPER. This causes
link failures when DRM_GEM_SHMEM_HELPER is not enabled.
Select DRM_GEM_SHMEM_HELPER to fix the build.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509220320.gfFZjmyg-lkp@intel.com/
Fixes: c9e70639f5 ("drm: tiny: Add support for Mayqueen Pixpaper e-ink panel")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250922-bar-v1-1-b2a1f54ace82@gmail.com
During conversion of WARN_ON_ONCE to drm_WARN_ON_ONCE in
commit 2d2f1dc74c ("drm: gud: replace WARN_ON/WARN_ON_ONCE with
drm versions"), the IS_ERR check was accidentally removed, breaking
the gud_connector_add_properties() function, as any valid pointer
in state_val would produce an error.
The warning was reported by kernel test robot, and is fixed in this patch.
Fixes: 2d2f1dc74c ("drm: gud: replace WARN_ON/WARN_ON_ONCE with drm versions")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202509212215.c8v3RKmL-lkp@intel.com/
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250922173836.5608-1-rubenru09@aol.com
Currently we check if the encoder is INVALID or -1 and throw a
WARN_ON but we still end up writing the temp value which will
overflow and corrupt the whole programmed value.
--v2
-Assign a bogus transcoder to master in case we get a INVALID
TRANSCODER [Jani]
Fixes: 6671c367a9 ("drm/i915/tgl: Select master transcoder for MST stream")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250908042208.1011144-1-suraj.kandpal@intel.com
(cherry picked from commit c8e8e9ab14)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Without O_LARGEFILE, file->f_op->write_iter calls
generic_write_check_limits(), which enforces a 2GB (MAX_NON_LFS) limit,
causing -EFBIG on large writes.
In shmem_pwrite(), this error is later masked as -EIO due to the error
handling order, leading to igt failures like gen9_exec_parse(bb-large).
Set O_LARGEFILE in __create_shmem() to prevent -EFBIG on large writes.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202508081029.343192ec-lkp@intel.com
Fixes: 048832a3f4 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")
Signed-off-by: Taotao Chen <chentaotao@didiglobal.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250822030651.28099-1-chentaotao@didiglobal.com
(cherry picked from commit e296a2266c)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Make use of the newly-available `Alignment` type and remove the
corresponding TODO item.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
I don't think there should be any need for us to call any of
pci_enable_device(), pci_disable_device() or pci_set_master()
from the suspend/resume paths. The config space save/restore should
take care of all of this.
Cc: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250919185015.14561-7-ville.syrjala@linux.intel.com
Stop doing the pci_save_state(), except when we need to prevent
D3 due to BIOS bugs, so that the code in drivers/pci is allowed
to manage the state of the PCI device. Less chance something
getting left by the wayside by i915 if/when the things change in
drivers/pci.
Cc: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250919185015.14561-6-ville.syrjala@linux.intel.com
Since this switcheroo garbage bypasses all the core pm we
have to manually manage the pci state. To that end add the
missing pci_restore_state() to the switcheroo resume hook.
We already have the pci_save_state() counterpart on the
suspend side.
Arguably none of this code should exist in the driver
in the first place, and instead the entire switcheroo
mechanism should be rewritten and properly integrated into
core pm code...
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250919185015.14561-5-ville.syrjala@linux.intel.com
If the driver doesn't call pci_save_state() drivers/pci will
normally save+power manage the device from the _noirq() pm hooks.
We can't let that happen as some old BIOSes fail to hibernate
when the device is in D3. However, we can get very close to
the standard behaviour by doing our explicit pci_save_state()
and pci_set_power_state() stuff from driver provided _noirq()
hooks.
This results in a change of behaviour where we no longer go
into D3 at the end of freeze_late, so when it comes time
to thaw() we'll already be in D0, and thus we can drop the
explicit pci_set_power_state(D0) call.
Presumably switcheroo suspend will want to go into D3 so
call the _noirq() stuff from the switcheroo suspend hook,
and since we dropped the pci_set_power_state(D0) from
resume_early() we'll need to add one back into the
switcheroo resume hook.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250919185015.14561-4-ville.syrjala@linux.intel.com
drivers/pci does the pci_save_state()+pci_set_power_state() from
the _noirq() pm hooks. Move our manual calls (needed for the
hibernate vs. D3 workaround with buggy BIOSes) towards that same
point. We currently have no _noirq() hooks, so end of _late()
hooks is the best we can do right now.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250919185015.14561-3-ville.syrjala@linux.intel.com
Stop spelling out each variant of the hook ("" vs. "_late" vs.
"_early") and just say eg. "@thaw*" to indicate all of them.
Avoids having to update the docs whenever we start/stop using
one of the variants.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250919185015.14561-2-ville.syrjala@linux.intel.com
We were copying the bo content the bos on the list
"xe->pinned.late.kernel_bo_present" twice on suspend.
Presumingly the intent is to copy the pinned external bos on
the first pass.
This is harmless since we (currently) should have no pinned
external bos needing copy since
a) exernal system bos don't have compressed content,
b) We do not (yet) allow pinning of VRAM bos.
Still, fix this up so that we copy pinned external bos on
the first pass. We're about to allow bos pinned in VRAM.
Fixes: c6a4d46ec1 ("drm/xe: evict user memory in PM notifier")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250918092207.54472-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 9e69bafece)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When building with CONFIG_MODULES=n, the __exit functions are dropped.
However our init functions may call them for error handling, so they are
not good candidates for the exit sections.
Fix this error reported by 0day:
ld.lld: error: relocation refers to a symbol in a discarded section: xe_configfs_exit
>>> defined in vmlinux.a(drivers/gpu/drm/xe/xe_configfs.o)
>>> referenced by xe_module.c
>>> drivers/gpu/drm/xe/xe_module.o:(init_funcs) in archive vmlinux.a
This is the only exit function using __exit. Drop it to fix the build.
Cc: Riana Tauro <riana.tauro@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506092221.1FmUQmI8-lkp@intel.com/
Fixes: 16280ded45 ("drm/xe: Add configfs to enable survivability mode")
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20250912-fix-nomodule-build-v1-1-d11b70a92516@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit d9b2623319)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
VFs can't read BMG_PCIE_CAP(0x138340) register nor access PCODE
(already guarded by the info.skip_pcode flag) so we shouldn't
expose attributes that require any of them to avoid errors like:
[] xe 0000:03:00.1: [drm] Tile0: GT0: VF is trying to read an \
inaccessible register 0x138340+0x0
[] RIP: 0010:xe_gt_sriov_vf_read32+0x6c2/0x9a0 [xe]
[] Call Trace:
[] xe_mmio_read32+0x110/0x280 [xe]
[] auto_link_downgrade_capable_show+0x2e/0x70 [xe]
[] dev_attr_show+0x1a/0x70
[] sysfs_kf_seq_show+0xaa/0x120
[] kernfs_seq_show+0x41/0x60
Fixes: 0e414bf7ad ("drm/xe: Expose PCIe link downgrade attributes")
Fixes: cdc36b66cd ("drm/xe: Expose fan control and voltage regulator version")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250916170029.3313-2-michal.wajdeczko@intel.com
(cherry picked from commit a2d6223d22)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
RDMA NICs typically requires the VRAM dma-bufs to be pinned in
VRAM for pcie-p2p communication, since they don't fully support
the move_notify() scheme. We would like to support that.
However allowing unaccounted pinning of VRAM creates a DOS vector
so up until now we haven't allowed it.
However with cgroups support in TTM, the amount of VRAM allocated
to a cgroup can be limited, and since also the pinned memory is
accounted as allocated VRAM we should be safe.
An analogy with system memory can be made if we observe the
similarity with kernel system memory that is allocated as the
result of user-space action and that is accounted using __GFP_ACCOUNT.
Ideally, to be more flexible, we would add a "pinned_memory",
or possibly "kernel_memory" limit to the dmem cgroups controller,
that would additionally limit the memory that is pinned in this way.
If we let that limit default to the dmem::max limit we can
introduce that without needing to care about regressions.
Considering that we already pin VRAM in this way for at least
page-table memory and LRC memory, and the above path to greater
flexibility, allow this also for dma-bufs.
v2:
- Update comments about pinning in the dma-buf kunit test
(Niranjana Vishwanathapura)
Cc: Dave Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250918092207.54472-4-thomas.hellstrom@linux.intel.com
Similarly to what we do for other pinned bos, pre-allocate
system memory for pinned external bos in the pm notifier,
where swapping is still possible.
This hasn't been needed until now when we're about to allow
pinning of exernal VRAM bos.
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250918092207.54472-3-thomas.hellstrom@linux.intel.com
We were copying the bo content the bos on the list
"xe->pinned.late.kernel_bo_present" twice on suspend.
Presumingly the intent is to copy the pinned external bos on
the first pass.
This is harmless since we (currently) should have no pinned
external bos needing copy since
a) exernal system bos don't have compressed content,
b) We do not (yet) allow pinning of VRAM bos.
Still, fix this up so that we copy pinned external bos on
the first pass. We're about to allow bos pinned in VRAM.
Fixes: c6a4d46ec1 ("drm/xe: evict user memory in PM notifier")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250918092207.54472-2-thomas.hellstrom@linux.intel.com
Currently we check if the encoder is INVALID or -1 and throw a
WARN_ON but we still end up writing the temp value which will
overflow and corrupt the whole programmed value.
--v2
-Assign a bogus transcoder to master in case we get a INVALID
TRANSCODER [Jani]
Fixes: 6671c367a9 ("drm/i915/tgl: Select master transcoder for MST stream")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250908042208.1011144-1-suraj.kandpal@intel.com
- Drop L3 bank mask reporting from the media GT on Xe3 and later. Only
do that for the primary GT. No userspace needs or uses it for media
and some platforms may report bogus values.
- Add SLPC power_profile sysfs interface with support for base and
power_saving modes (Vinay Belgaumkar, Rodrigo Vivi)
- Add configfs attributes to add post/mid context-switch commands
(Lucas De Marchi)
Cross-subsystem Changes:
- Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to
align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes:
- Add MEI driver for Late Binding Firmware Update/Upload
(Alexander Usyskin)
Driver Changes:
- Fix GuC CT teardown wrt TLB invalidation (Satyanarayana)
- Fix CCS save/restore on VF (Satyanarayana)
- Increase default GuC crash buffer size (Zhanjun)
- Allow to clear GT stats in debugfs to aid debugging (Matthew Brost)
- Add more SVM GT stats to debugfs (Matthew Brost)
- Fix error handling in VMA attr query (Himal)
- Move sa_info in debugfs to be per tile (Michal Wajdeczko)
- Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to
avoid endless loop (Michal Wajdeczko)
- Fix configfs handling for survivability_mode undoing user choice when
unbinding the module (Michal Wajdeczko)
- Refactor configfs attribute visibility to future-proof it and stop
exposing survivability_mode if not applicable (Michal Wajdeczko)
- Constify some functions (Harish Chegondi, Michal Wajdeczko)
- Add/extend more HW workarounds for Xe2 and Xe3
(Harish Chegondi, Tangudu Tilak Tirumalesh)
- Replace xe_hmm with gpusvm (Matthew Auld)
- Improve fake pci and WA kunit handling for testing new platforms
(Michal Wajdeczko)
- Reduce unnecessary PTE writes when migrating (Sanjay Yadav)
- Cleanup GuC interface definitions and log message (John Harrison)
- Small improvements around VF CCS (Michal Wajdeczko)
- Enable bus mastering for the I2C controller (Raag Jadav)
- Prefer devm_mutex of hand rolling it (Christophe JAILLET)
- Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko)
- GuC CT devm actions improvements (Michal Wajdeczko)
- Recommend new GuC versions for PTL and BMG (Julia Filipchuk)
- Improveme driver handling for exhaustive eviction using new
xe_validation wrapper around drm_exec (Thomas Hellström)
- Add and use printk wrappers for tile and device (Michal Wajdeczko)
- Better document workaround handling in Xe (Lucas De Marchi)
- Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi,
Fushuai Wang)
- Align CSS firmware headers with the GuC APIs (John Harrison)
- Test GuC to GuC (G2G) communication to aid debug in pre-production
firmware (John Harrison)
- Bail out driver probing if GuC fails to load (John Harrison)
- Allow error injection in xe_pxp_exec_queue_add()
(Daniele Ceraolo Spurio)
- Minor refactors in xe_svm (Shuicheng Lin)
- Fix madvise ioctl error handling (Shuicheng Lin)
- Use attribute groups to simplify sysfs registration
(Michal Wajdeczko)
- Add Late Binding Firmware implementation in Xe to work together with
the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo
Vivi)
- Fix build with CONFIG_MODULES=n (Lucas De Marchi)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6rM8lpABPHM5FqyDm6KlpjDL6lMFAmjNZ8AACgkQm6KlpjDL
6lOiug/+L7kz6+diug2n6HjM0USxw9V9x3YuguSDErPief6c5ew2xMej72gEM9F6
VfPKvt6e3VsQ0nhhBhA0aZMzLgAD+FOxx9NzBu8QTFNCLENuSEBqfCdQ8pHhFLx4
CX4iU98pr11UPSnNQ8DKpegn0vEyBbIcT0Yxq1rm/rbF5l2vphh6AQw0ffE8RoaW
3721KFBReOVowARJUQkf9dUOSf9HowybhAJWXy5JSqNN1MlqWUfYGxkuS4NFGRz3
BBA0z+5JBqNKShVXOJbW+z04X/u08/VC6vCw9W7sOxEvfgTV2X1/xHzIFOwuU/hD
oUypLAjhXDdjvOBuXWc7C4+IlNCmoSZiubU/hCBsObElxX7VbkYna345r83Qv7K8
mCwjL3zjFgpWwvNblNL23TRQQJdMcXSlwuecnYelX2G0dPxZw17py1wMRVs7oVXQ
xdMnM8MOLlFzaSgNtWKoJcPgBrCLpkvtV3yNOa4kL8IekkiWHun7k2ruQIOb7ux+
kxWP62QyfJUAJA5pj5LPkym+6LYMcCDmz+n0wzvt5Nm8HSGX+YQXvmlHjwAmIhXP
USBKYSJrijtDoji9ng9eAD+Mkm0cH/NQeqbmHMsAhb9tatROzZGsH9lBDi5Kqxxt
2UyIOFM7K/oZ5PGGxTvvp62i0Psu/c9biTyAcrL/3TUGXHScDJ0=
=2NXV
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-09-19' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Drop L3 bank mask reporting from the media GT on Xe3 and later. Only
do that for the primary GT. No userspace needs or uses it for media
and some platforms may report bogus values.
- Add SLPC power_profile sysfs interface with support for base and
power_saving modes (Vinay Belgaumkar, Rodrigo Vivi)
- Add configfs attributes to add post/mid context-switch commands
(Lucas De Marchi)
Cross-subsystem Changes:
- Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to
align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes:
- Add MEI driver for Late Binding Firmware Update/Upload
(Alexander Usyskin)
Driver Changes:
- Fix GuC CT teardown wrt TLB invalidation (Satyanarayana)
- Fix CCS save/restore on VF (Satyanarayana)
- Increase default GuC crash buffer size (Zhanjun)
- Allow to clear GT stats in debugfs to aid debugging (Matthew Brost)
- Add more SVM GT stats to debugfs (Matthew Brost)
- Fix error handling in VMA attr query (Himal)
- Move sa_info in debugfs to be per tile (Michal Wajdeczko)
- Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to
avoid endless loop (Michal Wajdeczko)
- Fix configfs handling for survivability_mode undoing user choice when
unbinding the module (Michal Wajdeczko)
- Refactor configfs attribute visibility to future-proof it and stop
exposing survivability_mode if not applicable (Michal Wajdeczko)
- Constify some functions (Harish Chegondi, Michal Wajdeczko)
- Add/extend more HW workarounds for Xe2 and Xe3
(Harish Chegondi, Tangudu Tilak Tirumalesh)
- Replace xe_hmm with gpusvm (Matthew Auld)
- Improve fake pci and WA kunit handling for testing new platforms
(Michal Wajdeczko)
- Reduce unnecessary PTE writes when migrating (Sanjay Yadav)
- Cleanup GuC interface definitions and log message (John Harrison)
- Small improvements around VF CCS (Michal Wajdeczko)
- Enable bus mastering for the I2C controller (Raag Jadav)
- Prefer devm_mutex of hand rolling it (Christophe JAILLET)
- Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko)
- GuC CT devm actions improvements (Michal Wajdeczko)
- Recommend new GuC versions for PTL and BMG (Julia Filipchuk)
- Improveme driver handling for exhaustive eviction using new
xe_validation wrapper around drm_exec (Thomas Hellström)
- Add and use printk wrappers for tile and device (Michal Wajdeczko)
- Better document workaround handling in Xe (Lucas De Marchi)
- Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi,
Fushuai Wang)
- Align CSS firmware headers with the GuC APIs (John Harrison)
- Test GuC to GuC (G2G) communication to aid debug in pre-production
firmware (John Harrison)
- Bail out driver probing if GuC fails to load (John Harrison)
- Allow error injection in xe_pxp_exec_queue_add()
(Daniele Ceraolo Spurio)
- Minor refactors in xe_svm (Shuicheng Lin)
- Fix madvise ioctl error handling (Shuicheng Lin)
- Use attribute groups to simplify sysfs registration
(Michal Wajdeczko)
- Add Late Binding Firmware implementation in Xe to work together with
the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo
Vivi)
- Fix build with CONFIG_MODULES=n (Lucas De Marchi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/c2et6dnkst2apsgt46dklej4nprqdukjosb55grpaknf3pvcxy@t7gtn3hqtp6n
As raised by Andrew [1], a folio/compound page never spans a negative
number of pages. Consequently, let's use "unsigned long" instead of
"long" consistently for folio_nr_pages(), folio_large_nr_pages() and
compound_nr().
Using "unsigned long" as return value is fine, because even
"(long)-folio_nr_pages()" will keep on working as expected. Using
"unsigned int" instead would actually break these use cases.
This patch takes the first step changing these to return unsigned long
(and making drm_gem_get_pages() use the new types instead of replacing
min()).
In the future, we might want to make more callers of these functions to
consistently use "unsigned long".
Link: https://lore.kernel.org/linux-mm/20250503182858.5a02729fcffd6d4723afcfc2@linux-foundation.org/
Link: https://lkml.kernel.org/r/20250826153721.GA23292@cathedrallabs.org
Link: https://lore.kernel.org/linux-mm/20250503182858.5a02729fcffd6d4723afcfc2@linux-foundation.org/ [1]
Signed-off-by: Aristeu Rozanski <aris@ruivo.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's no longer required to use nth_page() when iterating pages within a
single SG entry, so let's drop the nth_page() usage.
Link: https://lkml.kernel.org/r/20250901150359.867252-27-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
